1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * AU Optronics A030JTN01.0 TFT LCD panel driver
4  *
5  * Copyright (C) 2023, Paul Cercueil <paul@crapouillou.net>
6  * Copyright (C) 2023, Christophe Branchereau <cbranchereau@gmail.com>
7  */
8 
9 #include <linux/bitfield.h>
10 #include <linux/delay.h>
11 #include <linux/device.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/media-bus-format.h>
14 #include <linux/mod_devicetable.h>
15 #include <linux/module.h>
16 #include <linux/regmap.h>
17 #include <linux/regulator/consumer.h>
18 #include <linux/spi/spi.h>
19 
20 #include <drm/drm_modes.h>
21 #include <drm/drm_panel.h>
22 
23 #define REG05			0x05
24 #define REG06			0x06
25 #define REG07			0x07
26 
27 #define REG05_STDBY		BIT(0)
28 #define REG06_VBLK		GENMASK(4, 0)
29 #define REG07_HBLK		GENMASK(7, 0)
30 
31 
32 struct a030jtn01_info {
33 	const struct drm_display_mode *display_modes;
34 	unsigned int num_modes;
35 	u16 width_mm, height_mm;
36 	u32 bus_format, bus_flags;
37 };
38 
39 struct a030jtn01 {
40 	struct drm_panel panel;
41 	struct spi_device *spi;
42 	struct regmap *map;
43 
44 	const struct a030jtn01_info *panel_info;
45 
46 	struct regulator *supply;
47 	struct gpio_desc *reset_gpio;
48 };
49 
to_a030jtn01(struct drm_panel * panel)50 static inline struct a030jtn01 *to_a030jtn01(struct drm_panel *panel)
51 {
52 	return container_of(panel, struct a030jtn01, panel);
53 }
54 
a030jtn01_prepare(struct drm_panel * panel)55 static int a030jtn01_prepare(struct drm_panel *panel)
56 {
57 	struct a030jtn01 *priv = to_a030jtn01(panel);
58 	struct device *dev = &priv->spi->dev;
59 	unsigned int dummy;
60 	int err;
61 
62 	err = regulator_enable(priv->supply);
63 	if (err) {
64 		dev_err(dev, "Failed to enable power supply: %d\n", err);
65 		return err;
66 	}
67 
68 	usleep_range(1000, 8000);
69 
70 	/* Reset the chip */
71 	gpiod_set_value_cansleep(priv->reset_gpio, 1);
72 	usleep_range(100, 8000);
73 	gpiod_set_value_cansleep(priv->reset_gpio, 0);
74 	usleep_range(2000, 8000);
75 
76 	/*
77 	 * No idea why, but a register read (doesn't matter which) is needed to
78 	 * properly initialize the chip after a reset; otherwise, the colors
79 	 * will be wrong. It doesn't seem to be timing-related as a msleep(200)
80 	 * doesn't fix it.
81 	 */
82 	err = regmap_read(priv->map, REG05, &dummy);
83 	if (err)
84 		goto err_disable_regulator;
85 
86 	/* Use (24 + 6) == 0x1e as the vertical back porch */
87 	err = regmap_write(priv->map, REG06, FIELD_PREP(REG06_VBLK, 0x1e));
88 	if (err)
89 		goto err_disable_regulator;
90 
91 	/* Use (42 + 30) * 3 == 0xd8 as the horizontal back porch */
92 	err = regmap_write(priv->map, REG07, FIELD_PREP(REG07_HBLK, 0xd8));
93 	if (err)
94 		goto err_disable_regulator;
95 
96 	return 0;
97 
98 err_disable_regulator:
99 	gpiod_set_value_cansleep(priv->reset_gpio, 1);
100 	regulator_disable(priv->supply);
101 	return err;
102 }
103 
a030jtn01_unprepare(struct drm_panel * panel)104 static int a030jtn01_unprepare(struct drm_panel *panel)
105 {
106 	struct a030jtn01 *priv = to_a030jtn01(panel);
107 
108 	gpiod_set_value_cansleep(priv->reset_gpio, 1);
109 	regulator_disable(priv->supply);
110 
111 	return 0;
112 }
113 
a030jtn01_enable(struct drm_panel * panel)114 static int a030jtn01_enable(struct drm_panel *panel)
115 {
116 	struct a030jtn01 *priv = to_a030jtn01(panel);
117 	int ret;
118 
119 	ret = regmap_set_bits(priv->map, REG05, REG05_STDBY);
120 	if (ret)
121 		return ret;
122 
123 	/* Wait for the picture to be stable */
124 	if (panel->backlight)
125 		msleep(100);
126 
127 	return 0;
128 }
129 
a030jtn01_disable(struct drm_panel * panel)130 static int a030jtn01_disable(struct drm_panel *panel)
131 {
132 	struct a030jtn01 *priv = to_a030jtn01(panel);
133 
134 	return regmap_clear_bits(priv->map, REG05, REG05_STDBY);
135 }
136 
a030jtn01_get_modes(struct drm_panel * panel,struct drm_connector * connector)137 static int a030jtn01_get_modes(struct drm_panel *panel,
138 				struct drm_connector *connector)
139 {
140 	struct a030jtn01 *priv = to_a030jtn01(panel);
141 	const struct a030jtn01_info *panel_info = priv->panel_info;
142 	struct drm_display_mode *mode;
143 	unsigned int i;
144 
145 	for (i = 0; i < panel_info->num_modes; i++) {
146 		mode = drm_mode_duplicate(connector->dev,
147 					  &panel_info->display_modes[i]);
148 		if (!mode)
149 			return -ENOMEM;
150 
151 		drm_mode_set_name(mode);
152 
153 		mode->type = DRM_MODE_TYPE_DRIVER;
154 		if (panel_info->num_modes == 1)
155 			mode->type |= DRM_MODE_TYPE_PREFERRED;
156 
157 		drm_mode_probed_add(connector, mode);
158 	}
159 
160 	connector->display_info.bpc = 8;
161 	connector->display_info.width_mm = panel_info->width_mm;
162 	connector->display_info.height_mm = panel_info->height_mm;
163 
164 	drm_display_info_set_bus_formats(&connector->display_info,
165 					 &panel_info->bus_format, 1);
166 	connector->display_info.bus_flags = panel_info->bus_flags;
167 
168 	return panel_info->num_modes;
169 }
170 
171 static const struct drm_panel_funcs a030jtn01_funcs = {
172 	.prepare	= a030jtn01_prepare,
173 	.unprepare	= a030jtn01_unprepare,
174 	.enable		= a030jtn01_enable,
175 	.disable	= a030jtn01_disable,
176 	.get_modes	= a030jtn01_get_modes,
177 };
178 
a030jtn01_has_reg(struct device * dev,unsigned int reg)179 static bool a030jtn01_has_reg(struct device *dev, unsigned int reg)
180 {
181 	static const u32 a030jtn01_regs_mask = 0x001823f1fb;
182 
183 	return a030jtn01_regs_mask & BIT(reg);
184 };
185 
186 static const struct regmap_config a030jtn01_regmap_config = {
187 	.reg_bits = 8,
188 	.val_bits = 8,
189 	.read_flag_mask = 0x40,
190 	.max_register = 0x1c,
191 	.readable_reg = a030jtn01_has_reg,
192 	.writeable_reg = a030jtn01_has_reg,
193 };
194 
a030jtn01_probe(struct spi_device * spi)195 static int a030jtn01_probe(struct spi_device *spi)
196 {
197 	struct device *dev = &spi->dev;
198 	struct a030jtn01 *priv;
199 	int err;
200 
201 	spi->mode |= SPI_MODE_3 | SPI_3WIRE;
202 
203 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
204 	if (!priv)
205 		return -ENOMEM;
206 
207 	priv->spi = spi;
208 	spi_set_drvdata(spi, priv);
209 
210 	priv->map = devm_regmap_init_spi(spi, &a030jtn01_regmap_config);
211 	if (IS_ERR(priv->map))
212 		return dev_err_probe(dev, PTR_ERR(priv->map), "Unable to init regmap");
213 
214 	priv->panel_info = spi_get_device_match_data(spi);
215 	if (!priv->panel_info)
216 		return -EINVAL;
217 
218 	priv->supply = devm_regulator_get(dev, "power");
219 	if (IS_ERR(priv->supply))
220 		return dev_err_probe(dev, PTR_ERR(priv->supply), "Failed to get power supply");
221 
222 	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
223 	if (IS_ERR(priv->reset_gpio))
224 		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO");
225 
226 	drm_panel_init(&priv->panel, dev, &a030jtn01_funcs,
227 		       DRM_MODE_CONNECTOR_DPI);
228 
229 	err = drm_panel_of_backlight(&priv->panel);
230 	if (err)
231 		return err;
232 
233 	drm_panel_add(&priv->panel);
234 
235 	return 0;
236 }
237 
a030jtn01_remove(struct spi_device * spi)238 static void a030jtn01_remove(struct spi_device *spi)
239 {
240 	struct a030jtn01 *priv = spi_get_drvdata(spi);
241 
242 	drm_panel_remove(&priv->panel);
243 	drm_panel_disable(&priv->panel);
244 	drm_panel_unprepare(&priv->panel);
245 }
246 
247 static const struct drm_display_mode a030jtn01_modes[] = {
248 	{ /* 60 Hz */
249 		.clock = 14400,
250 		.hdisplay = 320,
251 		.hsync_start = 320 + 8,
252 		.hsync_end = 320 + 8 + 42,
253 		.htotal = 320 + 8 + 42 + 30,
254 		.vdisplay = 480,
255 		.vsync_start = 480 + 90,
256 		.vsync_end = 480 + 90 + 24,
257 		.vtotal = 480 + 90 + 24 + 6,
258 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
259 	},
260 	{ /* 50 Hz */
261 		.clock = 12000,
262 		.hdisplay = 320,
263 		.hsync_start = 320 + 8,
264 		.hsync_end = 320 + 8 + 42,
265 		.htotal = 320 + 8 + 42 + 30,
266 		.vdisplay = 480,
267 		.vsync_start = 480 + 90,
268 		.vsync_end = 480 + 90 + 24,
269 		.vtotal = 480 + 90 + 24 + 6,
270 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
271 	},
272 };
273 
274 static const struct a030jtn01_info a030jtn01_info = {
275 	.display_modes = a030jtn01_modes,
276 	.num_modes = ARRAY_SIZE(a030jtn01_modes),
277 	.width_mm = 70,
278 	.height_mm = 51,
279 	.bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
280 	.bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
281 };
282 
283 static const struct spi_device_id a030jtn01_id[] = {
284 	{ "a030jtn01", (kernel_ulong_t) &a030jtn01_info },
285 	{ /* sentinel */ }
286 };
287 MODULE_DEVICE_TABLE(spi, a030jtn01_id);
288 
289 static const struct of_device_id a030jtn01_of_match[] = {
290 	{ .compatible = "auo,a030jtn01" },
291 	{ /* sentinel */ }
292 };
293 MODULE_DEVICE_TABLE(of, a030jtn01_of_match);
294 
295 static struct spi_driver a030jtn01_driver = {
296 	.driver = {
297 		.name = "auo-a030jtn01",
298 		.of_match_table = a030jtn01_of_match,
299 	},
300 	.id_table = a030jtn01_id,
301 	.probe = a030jtn01_probe,
302 	.remove = a030jtn01_remove,
303 };
304 module_spi_driver(a030jtn01_driver);
305 
306 MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
307 MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
308 MODULE_LICENSE("GPL");
309