xref: /openbmc/linux/arch/ia64/include/asm/mca_asm.h (revision b2441318)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * File:	mca_asm.h
4  * Purpose:	Machine check handling specific defines
5  *
6  * Copyright (C) 1999 Silicon Graphics, Inc.
7  * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
8  * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
9  * Copyright (C) 2000 Hewlett-Packard Co.
10  * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
11  * Copyright (C) 2002 Intel Corp.
12  * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
13  * Copyright (C) 2005 Silicon Graphics, Inc
14  * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
15  */
16 #ifndef _ASM_IA64_MCA_ASM_H
17 #define _ASM_IA64_MCA_ASM_H
18 
19 #include <asm/percpu.h>
20 
21 #define PSR_IC		13
22 #define PSR_I		14
23 #define	PSR_DT		17
24 #define PSR_RT		27
25 #define PSR_MC		35
26 #define PSR_IT		36
27 #define PSR_BN		44
28 
29 /*
30  * This macro converts a instruction virtual address to a physical address
31  * Right now for simulation purposes the virtual addresses are
32  * direct mapped to physical addresses.
33  *	1. Lop off bits 61 thru 63 in the virtual address
34  */
35 #define INST_VA_TO_PA(addr)							\
36 	dep	addr	= 0, addr, 61, 3
37 /*
38  * This macro converts a data virtual address to a physical address
39  * Right now for simulation purposes the virtual addresses are
40  * direct mapped to physical addresses.
41  *	1. Lop off bits 61 thru 63 in the virtual address
42  */
43 #define DATA_VA_TO_PA(addr)							\
44 	tpa	addr	= addr
45 /*
46  * This macro converts a data physical address to a virtual address
47  * Right now for simulation purposes the virtual addresses are
48  * direct mapped to physical addresses.
49  *	1. Put 0x7 in bits 61 thru 63.
50  */
51 #define DATA_PA_TO_VA(addr,temp)							\
52 	mov	temp	= 0x7	;;							\
53 	dep	addr	= temp, addr, 61, 3
54 
55 #define GET_THIS_PADDR(reg, var)		\
56 	mov	reg = IA64_KR(PER_CPU_DATA);;	\
57         addl	reg = THIS_CPU(var), reg
58 
59 /*
60  * This macro jumps to the instruction at the given virtual address
61  * and starts execution in physical mode with all the address
62  * translations turned off.
63  *	1.	Save the current psr
64  *	2.	Make sure that all the upper 32 bits are off
65  *
66  *	3.	Clear the interrupt enable and interrupt state collection bits
67  *		in the psr before updating the ipsr and iip.
68  *
69  *	4.	Turn off the instruction, data and rse translation bits of the psr
70  *		and store the new value into ipsr
71  *		Also make sure that the interrupts are disabled.
72  *		Ensure that we are in little endian mode.
73  *		[psr.{rt, it, dt, i, be} = 0]
74  *
75  *	5.	Get the physical address corresponding to the virtual address
76  *		of the next instruction bundle and put it in iip.
77  *		(Using magic numbers 24 and 40 in the deposint instruction since
78  *		 the IA64_SDK code directly maps to lower 24bits as physical address
79  *		 from a virtual address).
80  *
81  *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
82  */
83 #define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
84 	mov	old_psr = psr;								\
85 	;;										\
86 	dep	old_psr = 0, old_psr, 32, 32;						\
87 											\
88 	mov	ar.rsc = 0 ;								\
89 	;;										\
90 	srlz.d;										\
91 	mov	temp2 = ar.bspstore;							\
92 	;;										\
93 	DATA_VA_TO_PA(temp2);								\
94 	;;										\
95 	mov	temp1 = ar.rnat;							\
96 	;;										\
97 	mov	ar.bspstore = temp2;							\
98 	;;										\
99 	mov	ar.rnat = temp1;							\
100 	mov	temp1 = psr;								\
101 	mov	temp2 = psr;								\
102 	;;										\
103 											\
104 	dep	temp2 = 0, temp2, PSR_IC, 2;						\
105 	;;										\
106 	mov	psr.l = temp2;								\
107 	;;										\
108 	srlz.d;										\
109 	dep	temp1 = 0, temp1, 32, 32;						\
110 	;;										\
111 	dep	temp1 = 0, temp1, PSR_IT, 1;						\
112 	;;										\
113 	dep	temp1 = 0, temp1, PSR_DT, 1;						\
114 	;;										\
115 	dep	temp1 = 0, temp1, PSR_RT, 1;						\
116 	;;										\
117 	dep	temp1 = 0, temp1, PSR_I, 1;						\
118 	;;										\
119 	dep	temp1 = 0, temp1, PSR_IC, 1;						\
120 	;;										\
121 	dep	temp1 = -1, temp1, PSR_MC, 1;						\
122 	;;										\
123 	mov	cr.ipsr = temp1;							\
124 	;;										\
125 	LOAD_PHYSICAL(p0, temp2, start_addr);						\
126 	;;										\
127 	mov	cr.iip = temp2;								\
128 	mov	cr.ifs = r0;								\
129 	DATA_VA_TO_PA(sp);								\
130 	DATA_VA_TO_PA(gp);								\
131 	;;										\
132 	srlz.i;										\
133 	;;										\
134 	nop	1;									\
135 	nop	2;									\
136 	nop	1;									\
137 	nop	2;									\
138 	rfi;										\
139 	;;
140 
141 /*
142  * This macro jumps to the instruction at the given virtual address
143  * and starts execution in virtual mode with all the address
144  * translations turned on.
145  *	1.	Get the old saved psr
146  *
147  *	2.	Clear the interrupt state collection bit in the current psr.
148  *
149  *	3.	Set the instruction translation bit back in the old psr
150  *		Note we have to do this since we are right now saving only the
151  *		lower 32-bits of old psr.(Also the old psr has the data and
152  *		rse translation bits on)
153  *
154  *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
155  *
156  *	5.	Reset the current thread pointer (r13).
157  *
158  *	6.	Set iip to the virtual address of the next instruction bundle.
159  *
160  *	7.	Do an rfi to move ipsr to psr and iip to ip.
161  */
162 
163 #define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
164 	mov	temp2 = psr;					\
165 	;;							\
166 	mov	old_psr = temp2;				\
167 	;;							\
168 	dep	temp2 = 0, temp2, PSR_IC, 2;			\
169 	;;							\
170 	mov	psr.l = temp2;					\
171 	mov	ar.rsc = 0;					\
172 	;;							\
173 	srlz.d;							\
174 	mov	r13 = ar.k6;					\
175 	mov	temp2 = ar.bspstore;				\
176 	;;							\
177 	DATA_PA_TO_VA(temp2,temp1);				\
178 	;;							\
179 	mov	temp1 = ar.rnat;				\
180 	;;							\
181 	mov	ar.bspstore = temp2;				\
182 	;;							\
183 	mov	ar.rnat = temp1;				\
184 	;;							\
185 	mov	temp1 = old_psr;				\
186 	;;							\
187 	mov	temp2 = 1;					\
188 	;;							\
189 	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
190 	;;							\
191 	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
192 	;;							\
193 	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
194 	;;							\
195 	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
196 	;;							\
197 	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
198 	;;							\
199 								\
200 	mov     cr.ipsr = temp1;				\
201 	movl	temp2 = start_addr;				\
202 	;;							\
203 	mov	cr.iip = temp2;					\
204 	movl	gp = __gp					\
205 	;;							\
206 	DATA_PA_TO_VA(sp, temp1);				\
207 	srlz.i;							\
208 	;;							\
209 	nop	1;						\
210 	nop	2;						\
211 	nop	1;						\
212 	rfi							\
213 	;;
214 
215 /*
216  * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
217  * stacks, except that the SAL/OS state and a switch_stack are stored near the
218  * top of the MCA/INIT stack.  To support concurrent entry to MCA or INIT, as
219  * well as MCA over INIT, each event needs its own SAL/OS state.  All entries
220  * are 16 byte aligned.
221  *
222  *      +---------------------------+
223  *      |          pt_regs          |
224  *      +---------------------------+
225  *      |        switch_stack       |
226  *      +---------------------------+
227  *      |        SAL/OS state       |
228  *      +---------------------------+
229  *      |    16 byte scratch area   |
230  *      +---------------------------+ <-------- SP at start of C MCA handler
231  *      |           .....           |
232  *      +---------------------------+
233  *      | RBS for MCA/INIT handler  |
234  *      +---------------------------+
235  *      | struct task for MCA/INIT  |
236  *      +---------------------------+ <-------- Bottom of MCA/INIT stack
237  */
238 
239 #define ALIGN16(x)			((x)&~15)
240 #define MCA_PT_REGS_OFFSET		ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
241 #define MCA_SWITCH_STACK_OFFSET		ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
242 #define MCA_SOS_OFFSET			ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
243 #define MCA_SP_OFFSET			ALIGN16(MCA_SOS_OFFSET-16)
244 
245 #endif /* _ASM_IA64_MCA_ASM_H */
246