1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * PMC551 PCI Mezzanine Ram Device
4 *
5 * Author:
6 * Mark Ferrell <mferrell@mvista.com>
7 * Copyright 1999,2000 Nortel Networks
8 *
9 * Description:
10 * This driver is intended to support the PMC551 PCI Ram device
11 * from Ramix Inc. The PMC551 is a PMC Mezzanine module for
12 * cPCI embedded systems. The device contains a single SROM
13 * that initially programs the V370PDC chipset onboard the
14 * device, and various banks of DRAM/SDRAM onboard. This driver
15 * implements this PCI Ram device as an MTD (Memory Technology
16 * Device) so that it can be used to hold a file system, or for
17 * added swap space in embedded systems. Since the memory on
18 * this board isn't as fast as main memory we do not try to hook
19 * it into main memory as that would simply reduce performance
20 * on the system. Using it as a block device allows us to use
21 * it as high speed swap or for a high speed disk device of some
22 * sort. Which becomes very useful on diskless systems in the
23 * embedded market I might add.
24 *
25 * Notes:
26 * Due to what I assume is more buggy SROM, the 64M PMC551 I
27 * have available claims that all 4 of its DRAM banks have 64MiB
28 * of ram configured (making a grand total of 256MiB onboard).
29 * This is slightly annoying since the BAR0 size reflects the
30 * aperture size, not the dram size, and the V370PDC supplies no
31 * other method for memory size discovery. This problem is
32 * mostly only relevant when compiled as a module, as the
33 * unloading of the module with an aperture size smaller than
34 * the ram will cause the driver to detect the onboard memory
35 * size to be equal to the aperture size when the module is
36 * reloaded. Soooo, to help, the module supports an msize
37 * option to allow the specification of the onboard memory, and
38 * an asize option, to allow the specification of the aperture
39 * size. The aperture must be equal to or less then the memory
40 * size, the driver will correct this if you screw it up. This
41 * problem is not relevant for compiled in drivers as compiled
42 * in drivers only init once.
43 *
44 * Credits:
45 * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the
46 * initial example code of how to initialize this device and for
47 * help with questions I had concerning operation of the device.
48 *
49 * Most of the MTD code for this driver was originally written
50 * for the slram.o module in the MTD drivers package which
51 * allows the mapping of system memory into an MTD device.
52 * Since the PMC551 memory module is accessed in the same
53 * fashion as system memory, the slram.c code became a very nice
54 * fit to the needs of this driver. All we added was PCI
55 * detection/initialization to the driver and automatically figure
56 * out the size via the PCI detection.o, later changes by Corey
57 * Minyard set up the card to utilize a 1M sliding apature.
58 *
59 * Corey Minyard <minyard@nortelnetworks.com>
60 * * Modified driver to utilize a sliding aperture instead of
61 * mapping all memory into kernel space which turned out to
62 * be very wasteful.
63 * * Located a bug in the SROM's initialization sequence that
64 * made the memory unusable, added a fix to code to touch up
65 * the DRAM some.
66 *
67 * Bugs/FIXMEs:
68 * * MUST fix the init function to not spin on a register
69 * waiting for it to set .. this does not safely handle busted
70 * devices that never reset the register correctly which will
71 * cause the system to hang w/ a reboot being the only chance at
72 * recover. [sort of fixed, could be better]
73 * * Add I2C handling of the SROM so we can read the SROM's information
74 * about the aperture size. This should always accurately reflect the
75 * onboard memory size.
76 * * Comb the init routine. It's still a bit cludgy on a few things.
77 */
78
79 #include <linux/kernel.h>
80 #include <linux/module.h>
81 #include <linux/uaccess.h>
82 #include <linux/types.h>
83 #include <linux/init.h>
84 #include <linux/ptrace.h>
85 #include <linux/slab.h>
86 #include <linux/string.h>
87 #include <linux/timer.h>
88 #include <linux/major.h>
89 #include <linux/fs.h>
90 #include <linux/ioctl.h>
91 #include <asm/io.h>
92 #include <linux/pci.h>
93 #include <linux/mtd/mtd.h>
94
95 #define PMC551_VERSION \
96 "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
97
98 #define PCI_VENDOR_ID_V3_SEMI 0x11b0
99 #define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200
100
101 #define PMC551_PCI_MEM_MAP0 0x50
102 #define PMC551_PCI_MEM_MAP1 0x54
103 #define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000
104 #define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0
105 #define PMC551_PCI_MEM_MAP_REG_EN 0x00000002
106 #define PMC551_PCI_MEM_MAP_ENABLE 0x00000001
107
108 #define PMC551_SDRAM_MA 0x60
109 #define PMC551_SDRAM_CMD 0x62
110 #define PMC551_DRAM_CFG 0x64
111 #define PMC551_SYS_CTRL_REG 0x78
112
113 #define PMC551_DRAM_BLK0 0x68
114 #define PMC551_DRAM_BLK1 0x6c
115 #define PMC551_DRAM_BLK2 0x70
116 #define PMC551_DRAM_BLK3 0x74
117 #define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f))
118 #define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12))
119 #define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8))
120
121 struct mypriv {
122 struct pci_dev *dev;
123 u_char *start;
124 u32 base_map0;
125 u32 curr_map0;
126 u32 asize;
127 struct mtd_info *nextpmc551;
128 };
129
130 static struct mtd_info *pmc551list;
131
132 static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
133 size_t *retlen, void **virt, resource_size_t *phys);
134
pmc551_erase(struct mtd_info * mtd,struct erase_info * instr)135 static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
136 {
137 struct mypriv *priv = mtd->priv;
138 u32 soff_hi; /* start address offset hi */
139 u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
140 unsigned long end;
141 u_char *ptr;
142 size_t retlen;
143
144 #ifdef CONFIG_MTD_PMC551_DEBUG
145 printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr,
146 (long)instr->len);
147 #endif
148
149 end = instr->addr + instr->len - 1;
150 eoff_hi = end & ~(priv->asize - 1);
151 soff_hi = instr->addr & ~(priv->asize - 1);
152 eoff_lo = end & (priv->asize - 1);
153
154 pmc551_point(mtd, instr->addr, instr->len, &retlen,
155 (void **)&ptr, NULL);
156
157 if (soff_hi == eoff_hi || mtd->size == priv->asize) {
158 /* The whole thing fits within one access, so just one shot
159 will do it. */
160 memset(ptr, 0xff, instr->len);
161 } else {
162 /* We have to do multiple writes to get all the data
163 written. */
164 while (soff_hi != eoff_hi) {
165 #ifdef CONFIG_MTD_PMC551_DEBUG
166 printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, "
167 "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
168 #endif
169 memset(ptr, 0xff, priv->asize);
170 if (soff_hi + priv->asize >= mtd->size) {
171 goto out;
172 }
173 soff_hi += priv->asize;
174 pmc551_point(mtd, (priv->base_map0 | soff_hi),
175 priv->asize, &retlen,
176 (void **)&ptr, NULL);
177 }
178 memset(ptr, 0xff, eoff_lo);
179 }
180
181 out:
182 #ifdef CONFIG_MTD_PMC551_DEBUG
183 printk(KERN_DEBUG "pmc551_erase() done\n");
184 #endif
185
186 return 0;
187 }
188
pmc551_point(struct mtd_info * mtd,loff_t from,size_t len,size_t * retlen,void ** virt,resource_size_t * phys)189 static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
190 size_t *retlen, void **virt, resource_size_t *phys)
191 {
192 struct mypriv *priv = mtd->priv;
193 u32 soff_hi;
194 u32 soff_lo;
195
196 #ifdef CONFIG_MTD_PMC551_DEBUG
197 printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
198 #endif
199
200 soff_hi = from & ~(priv->asize - 1);
201 soff_lo = from & (priv->asize - 1);
202
203 /* Cheap hack optimization */
204 if (priv->curr_map0 != from) {
205 pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
206 (priv->base_map0 | soff_hi));
207 priv->curr_map0 = soff_hi;
208 }
209
210 *virt = priv->start + soff_lo;
211 *retlen = len;
212 return 0;
213 }
214
pmc551_unpoint(struct mtd_info * mtd,loff_t from,size_t len)215 static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
216 {
217 #ifdef CONFIG_MTD_PMC551_DEBUG
218 printk(KERN_DEBUG "pmc551_unpoint()\n");
219 #endif
220 return 0;
221 }
222
pmc551_read(struct mtd_info * mtd,loff_t from,size_t len,size_t * retlen,u_char * buf)223 static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
224 size_t * retlen, u_char * buf)
225 {
226 struct mypriv *priv = mtd->priv;
227 u32 soff_hi; /* start address offset hi */
228 u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
229 unsigned long end;
230 u_char *ptr;
231 u_char *copyto = buf;
232
233 #ifdef CONFIG_MTD_PMC551_DEBUG
234 printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n",
235 (long)from, (long)len, (long)priv->asize);
236 #endif
237
238 end = from + len - 1;
239 soff_hi = from & ~(priv->asize - 1);
240 eoff_hi = end & ~(priv->asize - 1);
241 eoff_lo = end & (priv->asize - 1);
242
243 pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL);
244
245 if (soff_hi == eoff_hi) {
246 /* The whole thing fits within one access, so just one shot
247 will do it. */
248 memcpy(copyto, ptr, len);
249 copyto += len;
250 } else {
251 /* We have to do multiple writes to get all the data
252 written. */
253 while (soff_hi != eoff_hi) {
254 #ifdef CONFIG_MTD_PMC551_DEBUG
255 printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, "
256 "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
257 #endif
258 memcpy(copyto, ptr, priv->asize);
259 copyto += priv->asize;
260 if (soff_hi + priv->asize >= mtd->size) {
261 goto out;
262 }
263 soff_hi += priv->asize;
264 pmc551_point(mtd, soff_hi, priv->asize, retlen,
265 (void **)&ptr, NULL);
266 }
267 memcpy(copyto, ptr, eoff_lo);
268 copyto += eoff_lo;
269 }
270
271 out:
272 #ifdef CONFIG_MTD_PMC551_DEBUG
273 printk(KERN_DEBUG "pmc551_read() done\n");
274 #endif
275 *retlen = copyto - buf;
276 return 0;
277 }
278
pmc551_write(struct mtd_info * mtd,loff_t to,size_t len,size_t * retlen,const u_char * buf)279 static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
280 size_t * retlen, const u_char * buf)
281 {
282 struct mypriv *priv = mtd->priv;
283 u32 soff_hi; /* start address offset hi */
284 u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
285 unsigned long end;
286 u_char *ptr;
287 const u_char *copyfrom = buf;
288
289 #ifdef CONFIG_MTD_PMC551_DEBUG
290 printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n",
291 (long)to, (long)len, (long)priv->asize);
292 #endif
293
294 end = to + len - 1;
295 soff_hi = to & ~(priv->asize - 1);
296 eoff_hi = end & ~(priv->asize - 1);
297 eoff_lo = end & (priv->asize - 1);
298
299 pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL);
300
301 if (soff_hi == eoff_hi) {
302 /* The whole thing fits within one access, so just one shot
303 will do it. */
304 memcpy(ptr, copyfrom, len);
305 copyfrom += len;
306 } else {
307 /* We have to do multiple writes to get all the data
308 written. */
309 while (soff_hi != eoff_hi) {
310 #ifdef CONFIG_MTD_PMC551_DEBUG
311 printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, "
312 "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
313 #endif
314 memcpy(ptr, copyfrom, priv->asize);
315 copyfrom += priv->asize;
316 if (soff_hi >= mtd->size) {
317 goto out;
318 }
319 soff_hi += priv->asize;
320 pmc551_point(mtd, soff_hi, priv->asize, retlen,
321 (void **)&ptr, NULL);
322 }
323 memcpy(ptr, copyfrom, eoff_lo);
324 copyfrom += eoff_lo;
325 }
326
327 out:
328 #ifdef CONFIG_MTD_PMC551_DEBUG
329 printk(KERN_DEBUG "pmc551_write() done\n");
330 #endif
331 *retlen = copyfrom - buf;
332 return 0;
333 }
334
335 /*
336 * Fixup routines for the V370PDC
337 * PCI device ID 0x020011b0
338 *
339 * This function basically kick starts the DRAM oboard the card and gets it
340 * ready to be used. Before this is done the device reads VERY erratic, so
341 * much that it can crash the Linux 2.2.x series kernels when a user cat's
342 * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
343 * register. FIXME: stop spinning on registers .. must implement a timeout
344 * mechanism
345 * returns the size of the memory region found.
346 */
fixup_pmc551(struct pci_dev * dev)347 static int __init fixup_pmc551(struct pci_dev *dev)
348 {
349 #ifdef CONFIG_MTD_PMC551_BUGFIX
350 u32 dram_data;
351 #endif
352 u32 size, dcmd, cfg, dtmp;
353 u16 cmd, tmp, i;
354 u8 bcmd, counter;
355
356 /* Sanity Check */
357 if (!dev) {
358 return -ENODEV;
359 }
360
361 /*
362 * Attempt to reset the card
363 * FIXME: Stop Spinning registers
364 */
365 counter = 0;
366 /* unlock registers */
367 pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5);
368 /* read in old data */
369 pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
370 /* bang the reset line up and down for a few */
371 for (i = 0; i < 10; i++) {
372 counter = 0;
373 bcmd &= ~0x80;
374 while (counter++ < 100) {
375 pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
376 }
377 counter = 0;
378 bcmd |= 0x80;
379 while (counter++ < 100) {
380 pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
381 }
382 }
383 bcmd |= (0x40 | 0x20);
384 pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
385
386 /*
387 * Take care and turn off the memory on the device while we
388 * tweak the configurations
389 */
390 pci_read_config_word(dev, PCI_COMMAND, &cmd);
391 tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
392 pci_write_config_word(dev, PCI_COMMAND, tmp);
393
394 /*
395 * Disable existing aperture before probing memory size
396 */
397 pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd);
398 dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN);
399 pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp);
400 /*
401 * Grab old BAR0 config so that we can figure out memory size
402 * This is another bit of kludge going on. The reason for the
403 * redundancy is I am hoping to retain the original configuration
404 * previously assigned to the card by the BIOS or some previous
405 * fixup routine in the kernel. So we read the old config into cfg,
406 * then write all 1's to the memory space, read back the result into
407 * "size", and then write back all the old config.
408 */
409 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg);
410 #ifndef CONFIG_MTD_PMC551_BUGFIX
411 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0);
412 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size);
413 size = (size & PCI_BASE_ADDRESS_MEM_MASK);
414 size &= ~(size - 1);
415 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg);
416 #else
417 /*
418 * Get the size of the memory by reading all the DRAM size values
419 * and adding them up.
420 *
421 * KLUDGE ALERT: the boards we are using have invalid column and
422 * row mux values. We fix them here, but this will break other
423 * memory configurations.
424 */
425 pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
426 size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
427 dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
428 dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
429 pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
430
431 pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
432 size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
433 dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
434 dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
435 pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
436
437 pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
438 size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
439 dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
440 dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
441 pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
442
443 pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
444 size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
445 dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
446 dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
447 pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
448
449 /*
450 * Oops .. something went wrong
451 */
452 if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
453 return -ENODEV;
454 }
455 #endif /* CONFIG_MTD_PMC551_BUGFIX */
456
457 if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
458 return -ENODEV;
459 }
460
461 /*
462 * Precharge Dram
463 */
464 pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400);
465 pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf);
466
467 /*
468 * Wait until command has gone through
469 * FIXME: register spinning issue
470 */
471 do {
472 pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
473 if (counter++ > 100)
474 break;
475 } while ((PCI_COMMAND_IO) & cmd);
476
477 /*
478 * Turn on auto refresh
479 * The loop is taken directly from Ramix's example code. I assume that
480 * this must be held high for some duration of time, but I can find no
481 * documentation refrencing the reasons why.
482 */
483 for (i = 1; i <= 8; i++) {
484 pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df);
485
486 /*
487 * Make certain command has gone through
488 * FIXME: register spinning issue
489 */
490 counter = 0;
491 do {
492 pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
493 if (counter++ > 100)
494 break;
495 } while ((PCI_COMMAND_IO) & cmd);
496 }
497
498 pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020);
499 pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff);
500
501 /*
502 * Wait until command completes
503 * FIXME: register spinning issue
504 */
505 counter = 0;
506 do {
507 pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
508 if (counter++ > 100)
509 break;
510 } while ((PCI_COMMAND_IO) & cmd);
511
512 pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd);
513 dcmd |= 0x02000000;
514 pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd);
515
516 /*
517 * Check to make certain fast back-to-back, if not
518 * then set it so
519 */
520 pci_read_config_word(dev, PCI_STATUS, &cmd);
521 if ((cmd & PCI_COMMAND_FAST_BACK) == 0) {
522 cmd |= PCI_COMMAND_FAST_BACK;
523 pci_write_config_word(dev, PCI_STATUS, cmd);
524 }
525
526 /*
527 * Check to make certain the DEVSEL is set correctly, this device
528 * has a tendency to assert DEVSEL and TRDY when a write is performed
529 * to the memory when memory is read-only
530 */
531 if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
532 cmd &= ~PCI_STATUS_DEVSEL_MASK;
533 pci_write_config_word(dev, PCI_STATUS, cmd);
534 }
535 /*
536 * Set to be prefetchable and put everything back based on old cfg.
537 * it's possible that the reset of the V370PDC nuked the original
538 * setup
539 */
540 /*
541 cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
542 pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
543 */
544
545 /*
546 * Turn PCI memory and I/O bus access back on
547 */
548 pci_write_config_word(dev, PCI_COMMAND,
549 PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
550 #ifdef CONFIG_MTD_PMC551_DEBUG
551 /*
552 * Some screen fun
553 */
554 printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
555 "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
556 size >> 10 : size >> 20,
557 (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
558 ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
559 (unsigned long long)pci_resource_start(dev, 0));
560
561 /*
562 * Check to see the state of the memory
563 */
564 pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd);
565 printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
566 "pmc551: DRAM_BLK0 Size: %d at %d\n"
567 "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
568 (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
569 (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
570 PMC551_DRAM_BLK_GET_SIZE(dcmd),
571 ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
572 ((dcmd >> 9) & 0xF));
573
574 pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd);
575 printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
576 "pmc551: DRAM_BLK1 Size: %d at %d\n"
577 "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
578 (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
579 (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
580 PMC551_DRAM_BLK_GET_SIZE(dcmd),
581 ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
582 ((dcmd >> 9) & 0xF));
583
584 pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd);
585 printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
586 "pmc551: DRAM_BLK2 Size: %d at %d\n"
587 "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
588 (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
589 (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
590 PMC551_DRAM_BLK_GET_SIZE(dcmd),
591 ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
592 ((dcmd >> 9) & 0xF));
593
594 pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd);
595 printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
596 "pmc551: DRAM_BLK3 Size: %d at %d\n"
597 "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
598 (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
599 (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
600 PMC551_DRAM_BLK_GET_SIZE(dcmd),
601 ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
602 ((dcmd >> 9) & 0xF));
603
604 pci_read_config_word(dev, PCI_COMMAND, &cmd);
605 printk(KERN_DEBUG "pmc551: Memory Access %s\n",
606 (((0x1 << 1) & cmd) == 0) ? "off" : "on");
607 printk(KERN_DEBUG "pmc551: I/O Access %s\n",
608 (((0x1 << 0) & cmd) == 0) ? "off" : "on");
609
610 pci_read_config_word(dev, PCI_STATUS, &cmd);
611 printk(KERN_DEBUG "pmc551: Devsel %s\n",
612 ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" :
613 ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" :
614 ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid");
615
616 printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
617 ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : "");
618
619 pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
620 printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n"
621 "pmc551: System Control Register is %slocked to PCI access\n"
622 "pmc551: System Control Register is %slocked to EEPROM access\n",
623 (bcmd & 0x1) ? "software" : "hardware",
624 (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un");
625 #endif
626 return size;
627 }
628
629 /*
630 * Kernel version specific module stuffages
631 */
632
633 MODULE_LICENSE("GPL");
634 MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>");
635 MODULE_DESCRIPTION(PMC551_VERSION);
636
637 /*
638 * Stuff these outside the ifdef so as to not bust compiled in driver support
639 */
640 static int msize = 0;
641 static int asize = 0;
642
643 module_param(msize, int, 0);
644 MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
645 module_param(asize, int, 0);
646 MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
647
648 /*
649 * PMC551 Card Initialization
650 */
init_pmc551(void)651 static int __init init_pmc551(void)
652 {
653 struct pci_dev *PCI_Device = NULL;
654 struct mypriv *priv;
655 int found = 0;
656 struct mtd_info *mtd;
657 int length = 0;
658
659 if (msize) {
660 msize = (1 << (ffs(msize) - 1)) << 20;
661 if (msize > (1 << 30)) {
662 printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",
663 msize);
664 return -EINVAL;
665 }
666 }
667
668 if (asize) {
669 asize = (1 << (ffs(asize) - 1)) << 20;
670 if (asize > (1 << 30)) {
671 printk(KERN_NOTICE "pmc551: Invalid aperture size "
672 "[%d]\n", asize);
673 return -EINVAL;
674 }
675 }
676
677 printk(KERN_INFO PMC551_VERSION);
678
679 /*
680 * PCU-bus chipset probe.
681 */
682 for (;;) {
683
684 if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI,
685 PCI_DEVICE_ID_V3_SEMI_V370PDC,
686 PCI_Device)) == NULL) {
687 break;
688 }
689
690 printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
691 (unsigned long long)pci_resource_start(PCI_Device, 0));
692
693 /*
694 * The PMC551 device acts VERY weird if you don't init it
695 * first. i.e. it will not correctly report devsel. If for
696 * some reason the sdram is in a wrote-protected state the
697 * device will DEVSEL when it is written to causing problems
698 * with the oldproc.c driver in
699 * some kernels (2.2.*)
700 */
701 if ((length = fixup_pmc551(PCI_Device)) <= 0) {
702 printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
703 break;
704 }
705
706 /*
707 * This is needed until the driver is capable of reading the
708 * onboard I2C SROM to discover the "real" memory size.
709 */
710 if (msize) {
711 length = msize;
712 printk(KERN_NOTICE "pmc551: Using specified memory "
713 "size 0x%x\n", length);
714 } else {
715 msize = length;
716 }
717
718 mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
719 if (!mtd)
720 break;
721
722 priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
723 if (!priv) {
724 kfree(mtd);
725 break;
726 }
727 mtd->priv = priv;
728 priv->dev = PCI_Device;
729
730 if (asize > length) {
731 printk(KERN_NOTICE "pmc551: reducing aperture size to "
732 "fit %dM\n", length >> 20);
733 priv->asize = asize = length;
734 } else if (asize == 0 || asize == length) {
735 printk(KERN_NOTICE "pmc551: Using existing aperture "
736 "size %dM\n", length >> 20);
737 priv->asize = asize = length;
738 } else {
739 printk(KERN_NOTICE "pmc551: Using specified aperture "
740 "size %dM\n", asize >> 20);
741 priv->asize = asize;
742 }
743 priv->start = pci_iomap(PCI_Device, 0, priv->asize);
744
745 if (!priv->start) {
746 printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
747 kfree(mtd->priv);
748 kfree(mtd);
749 break;
750 }
751 #ifdef CONFIG_MTD_PMC551_DEBUG
752 printk(KERN_DEBUG "pmc551: setting aperture to %d\n",
753 ffs(priv->asize >> 20) - 1);
754 #endif
755
756 priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN
757 | PMC551_PCI_MEM_MAP_ENABLE
758 | (ffs(priv->asize >> 20) - 1) << 4);
759 priv->curr_map0 = priv->base_map0;
760 pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
761 priv->curr_map0);
762
763 #ifdef CONFIG_MTD_PMC551_DEBUG
764 printk(KERN_DEBUG "pmc551: aperture set to %d\n",
765 (priv->base_map0 & 0xF0) >> 4);
766 #endif
767
768 mtd->size = msize;
769 mtd->flags = MTD_CAP_RAM;
770 mtd->_erase = pmc551_erase;
771 mtd->_read = pmc551_read;
772 mtd->_write = pmc551_write;
773 mtd->_point = pmc551_point;
774 mtd->_unpoint = pmc551_unpoint;
775 mtd->type = MTD_RAM;
776 mtd->name = "PMC551 RAM board";
777 mtd->erasesize = 0x10000;
778 mtd->writesize = 1;
779 mtd->owner = THIS_MODULE;
780
781 if (mtd_device_register(mtd, NULL, 0)) {
782 printk(KERN_NOTICE "pmc551: Failed to register new device\n");
783 pci_iounmap(PCI_Device, priv->start);
784 kfree(mtd->priv);
785 kfree(mtd);
786 break;
787 }
788
789 /* Keep a reference as the mtd_device_register worked */
790 pci_dev_get(PCI_Device);
791
792 printk(KERN_NOTICE "Registered pmc551 memory device.\n");
793 printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
794 priv->asize >> 20,
795 priv->start, priv->start + priv->asize);
796 printk(KERN_NOTICE "Total memory is %d%sB\n",
797 (length < 1024) ? length :
798 (length < 1048576) ? length >> 10 : length >> 20,
799 (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
800 priv->nextpmc551 = pmc551list;
801 pmc551list = mtd;
802 found++;
803 }
804
805 /* Exited early, reference left over */
806 pci_dev_put(PCI_Device);
807
808 if (!pmc551list) {
809 printk(KERN_NOTICE "pmc551: not detected\n");
810 return -ENODEV;
811 } else {
812 printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
813 return 0;
814 }
815 }
816
817 /*
818 * PMC551 Card Cleanup
819 */
cleanup_pmc551(void)820 static void __exit cleanup_pmc551(void)
821 {
822 int found = 0;
823 struct mtd_info *mtd;
824 struct mypriv *priv;
825
826 while ((mtd = pmc551list)) {
827 priv = mtd->priv;
828 pmc551list = priv->nextpmc551;
829
830 if (priv->start) {
831 printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
832 "0x%p\n", priv->asize >> 20, priv->start);
833 pci_iounmap(priv->dev, priv->start);
834 }
835 pci_dev_put(priv->dev);
836
837 kfree(mtd->priv);
838 mtd_device_unregister(mtd);
839 kfree(mtd);
840 found++;
841 }
842
843 printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found);
844 }
845
846 module_init(init_pmc551);
847 module_exit(cleanup_pmc551);
848