1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
4 */
5
6 #include <common.h>
7 #include <malloc.h>
8 #include <dwmmc.h>
9 #include <linux/libfdt.h>
10 #include <fdtdec.h>
11
12 #include <asm/arcregs.h>
13
14 DECLARE_GLOBAL_DATA_PTR;
15
16 #define SYSCON_BASE 0xf000a000
17 #define AHBCKDIV (void *)(SYSCON_BASE + 0x04)
18 #define APBCKDIV (void *)(SYSCON_BASE + 0x08)
19 #define APBCKEN (void *)(SYSCON_BASE + 0x0C)
20 #define RESET_REG (void *)(SYSCON_BASE + 0x18)
21 #define CLKSEL (void *)(SYSCON_BASE + 0x24)
22 #define CLKSTAT (void *)(SYSCON_BASE + 0x28)
23 #define PLLCON (void *)(SYSCON_BASE + 0x2C)
24 #define APBCKSEL (void *)(SYSCON_BASE + 0x30)
25 #define AHBCKEN (void *)(SYSCON_BASE + 0x34)
26 #define USBPHY_PLL (void *)(SYSCON_BASE + 0x78)
27 #define USBCFG (void *)(SYSCON_BASE + 0x7c)
28
29 #define PLL_MASK_0 0xffcfffff
30 #define PLL_MASK_1 0xffcfff00
31 #define PLL_MASK_2 0xfbcfff00
32
33 #define CLKSEL_DEFAULT 0x5a690000
34
set_cpu_freq(unsigned int clk)35 static int set_cpu_freq(unsigned int clk)
36 {
37 clk /= 1000000;
38
39 /* Set clk to ext Xtal (LSN value 0) */
40 writel(CLKSEL_DEFAULT, CLKSEL);
41
42 switch (clk) {
43 case 16:
44 /* Bypass mode */
45 return 0;
46
47 case 50:
48 writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
49 /* pll_off=1, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
50 writel((readl(PLLCON) & PLL_MASK_1) | 0x300191, PLLCON);
51 /* pll_off=0, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
52 writel((readl(PLLCON) & PLL_MASK_2) | 0x300191, PLLCON);
53 break;
54
55 case 72:
56 writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
57 /* pll_off=1, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
58 writel((readl(PLLCON) & PLL_MASK_1) | 0x200121, PLLCON);
59 /* pll_off=0, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
60 writel((readl(PLLCON) & PLL_MASK_2) | 0x200121, PLLCON);
61 break;
62
63 case 100:
64 writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
65 /* pll_off=1,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
66 writel((readl(PLLCON) & PLL_MASK_1) | 0x200191, PLLCON);
67 /* pll_off=0,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
68 writel((readl(PLLCON) & PLL_MASK_2) | 0x200191, PLLCON);
69 break;
70
71 case 136:
72 writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
73 /* pll_off=1, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
74 writel((readl(PLLCON) & PLL_MASK_1) | 0x100111, PLLCON);
75 /* pll_off=0, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
76 writel((readl(PLLCON) & PLL_MASK_2) | 0x100111, PLLCON);
77 break;
78
79 case 144:
80 writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
81 /* pll_off=1, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
82 writel((readl(PLLCON) & PLL_MASK_1) | 0x100121, PLLCON);
83 /* pll_off=0, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
84 writel((readl(PLLCON) & PLL_MASK_2) | 0x100121, PLLCON);
85 break;
86
87 default:
88 return -EINVAL;
89 }
90
91 while (!(readl(CLKSTAT) & 0x4))
92 ;
93
94 /* Set clk from PLL on bus (LSN = 1) */
95 writel(CLKSEL_DEFAULT | BIT(0), CLKSEL);
96
97 return 0;
98 }
99
100 extern u8 __rom_end[];
101 extern u8 __ram_start[];
102 extern u8 __ram_end[];
103
104 /*
105 * Use mach_cpu_init() for .data section copy as board_early_init_f() will be
106 * too late: initf_dm() will use a value of "av_" variable from not yet
107 * initialized (by copy) area.
108 */
mach_cpu_init(void)109 int mach_cpu_init(void)
110 {
111 int offset;
112
113 /* Don't relocate U-Boot */
114 gd->flags |= GD_FLG_SKIP_RELOC;
115
116 /* Copy data from ROM to RAM */
117 u8 *src = __rom_end;
118 u8 *dst = __ram_start;
119
120 while (dst < __ram_end)
121 *dst++ = *src++;
122
123 /* Enable debug uart */
124 #define DEBUG_UART_BASE 0x80014000
125 #define DEBUG_UART_DLF_OFFSET 0xc0
126 write_aux_reg(DEBUG_UART_BASE + DEBUG_UART_DLF_OFFSET, 1);
127
128 offset = fdt_path_offset(gd->fdt_blob, "/cpu_card/core_clk");
129 if (offset < 0)
130 return offset;
131
132 gd->cpu_clk = fdtdec_get_int(gd->fdt_blob, offset, "clock-frequency", 0);
133 if (!gd->cpu_clk)
134 return -EINVAL;
135
136 /* If CPU freq > 100 MHz, divide eFLASH clock by 2 */
137 if (gd->cpu_clk > 100000000) {
138 u32 reg = readl(AHBCKDIV);
139
140 reg &= ~(0xF << 8);
141 reg |= 2 << 8;
142 writel(reg, AHBCKDIV);
143 }
144
145 return set_cpu_freq(gd->cpu_clk);
146 }
147
148 #define ARC_PERIPHERAL_BASE 0xF0000000
149 #define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xB000)
150
board_mmc_init(bd_t * bis)151 int board_mmc_init(bd_t *bis)
152 {
153 struct dwmci_host *host = NULL;
154
155 host = malloc(sizeof(struct dwmci_host));
156 if (!host) {
157 printf("dwmci_host malloc fail!\n");
158 return -ENOMEM;
159 }
160
161 memset(host, 0, sizeof(struct dwmci_host));
162 host->name = "Synopsys Mobile storage";
163 host->ioaddr = (void *)SDIO_BASE;
164 host->buswidth = 4;
165 host->dev_index = 0;
166 host->bus_hz = 50000000;
167
168 add_dwmci(host, host->bus_hz / 2, 400000);
169
170 return 0;
171 }
172
board_mmc_getcd(struct mmc * mmc)173 int board_mmc_getcd(struct mmc *mmc)
174 {
175 struct dwmci_host *host = mmc->priv;
176
177 return !(dwmci_readl(host, DWMCI_CDETECT) & 1);
178 }
179
180 #define IOTDK_RESET_SEQ 0x55AA6699
181
reset_cpu(ulong addr)182 void reset_cpu(ulong addr)
183 {
184 writel(IOTDK_RESET_SEQ, RESET_REG);
185 }
186
checkboard(void)187 int checkboard(void)
188 {
189 puts("Board: Synopsys IoT Development Kit\n");
190 return 0;
191 };
192