1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright 2012-2013 Freescale Semiconductor, Inc.
4  */
5 
6 #include <linux/interrupt.h>
7 #include <linux/clockchips.h>
8 #include <linux/clk.h>
9 #include <linux/of_address.h>
10 #include <linux/of_irq.h>
11 #include <linux/sched_clock.h>
12 
13 /*
14  * Each pit takes 0x10 Bytes register space
15  */
16 #define PITMCR		0x00
17 #define PIT0_OFFSET	0x100
18 #define PITn_OFFSET(n)	(PIT0_OFFSET + 0x10 * (n))
19 #define PITLDVAL	0x00
20 #define PITCVAL		0x04
21 #define PITTCTRL	0x08
22 #define PITTFLG		0x0c
23 
24 #define PITMCR_MDIS	(0x1 << 1)
25 
26 #define PITTCTRL_TEN	(0x1 << 0)
27 #define PITTCTRL_TIE	(0x1 << 1)
28 #define PITCTRL_CHN	(0x1 << 2)
29 
30 #define PITTFLG_TIF	0x1
31 
32 static void __iomem *clksrc_base;
33 static void __iomem *clkevt_base;
34 static unsigned long cycle_per_jiffy;
35 
pit_timer_enable(void)36 static inline void pit_timer_enable(void)
37 {
38 	__raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
39 }
40 
pit_timer_disable(void)41 static inline void pit_timer_disable(void)
42 {
43 	__raw_writel(0, clkevt_base + PITTCTRL);
44 }
45 
pit_irq_acknowledge(void)46 static inline void pit_irq_acknowledge(void)
47 {
48 	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
49 }
50 
pit_read_sched_clock(void)51 static u64 notrace pit_read_sched_clock(void)
52 {
53 	return ~__raw_readl(clksrc_base + PITCVAL);
54 }
55 
pit_clocksource_init(unsigned long rate)56 static int __init pit_clocksource_init(unsigned long rate)
57 {
58 	/* set the max load value and start the clock source counter */
59 	__raw_writel(0, clksrc_base + PITTCTRL);
60 	__raw_writel(~0UL, clksrc_base + PITLDVAL);
61 	__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
62 
63 	sched_clock_register(pit_read_sched_clock, 32, rate);
64 	return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
65 			300, 32, clocksource_mmio_readl_down);
66 }
67 
pit_set_next_event(unsigned long delta,struct clock_event_device * unused)68 static int pit_set_next_event(unsigned long delta,
69 				struct clock_event_device *unused)
70 {
71 	/*
72 	 * set a new value to PITLDVAL register will not restart the timer,
73 	 * to abort the current cycle and start a timer period with the new
74 	 * value, the timer must be disabled and enabled again.
75 	 * and the PITLAVAL should be set to delta minus one according to pit
76 	 * hardware requirement.
77 	 */
78 	pit_timer_disable();
79 	__raw_writel(delta - 1, clkevt_base + PITLDVAL);
80 	pit_timer_enable();
81 
82 	return 0;
83 }
84 
pit_shutdown(struct clock_event_device * evt)85 static int pit_shutdown(struct clock_event_device *evt)
86 {
87 	pit_timer_disable();
88 	return 0;
89 }
90 
pit_set_periodic(struct clock_event_device * evt)91 static int pit_set_periodic(struct clock_event_device *evt)
92 {
93 	pit_set_next_event(cycle_per_jiffy, evt);
94 	return 0;
95 }
96 
pit_timer_interrupt(int irq,void * dev_id)97 static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
98 {
99 	struct clock_event_device *evt = dev_id;
100 
101 	pit_irq_acknowledge();
102 
103 	/*
104 	 * pit hardware doesn't support oneshot, it will generate an interrupt
105 	 * and reload the counter value from PITLDVAL when PITCVAL reach zero,
106 	 * and start the counter again. So software need to disable the timer
107 	 * to stop the counter loop in ONESHOT mode.
108 	 */
109 	if (likely(clockevent_state_oneshot(evt)))
110 		pit_timer_disable();
111 
112 	evt->event_handler(evt);
113 
114 	return IRQ_HANDLED;
115 }
116 
117 static struct clock_event_device clockevent_pit = {
118 	.name		= "VF pit timer",
119 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
120 	.set_state_shutdown = pit_shutdown,
121 	.set_state_periodic = pit_set_periodic,
122 	.set_next_event	= pit_set_next_event,
123 	.rating		= 300,
124 };
125 
pit_clockevent_init(unsigned long rate,int irq)126 static int __init pit_clockevent_init(unsigned long rate, int irq)
127 {
128 	__raw_writel(0, clkevt_base + PITTCTRL);
129 	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
130 
131 	BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
132 			   "VF pit timer", &clockevent_pit));
133 
134 	clockevent_pit.cpumask = cpumask_of(0);
135 	clockevent_pit.irq = irq;
136 	/*
137 	 * The value for the LDVAL register trigger is calculated as:
138 	 * LDVAL trigger = (period / clock period) - 1
139 	 * The pit is a 32-bit down count timer, when the counter value
140 	 * reaches 0, it will generate an interrupt, thus the minimal
141 	 * LDVAL trigger value is 1. And then the min_delta is
142 	 * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
143 	 */
144 	clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
145 
146 	return 0;
147 }
148 
pit_timer_init(struct device_node * np)149 static int __init pit_timer_init(struct device_node *np)
150 {
151 	struct clk *pit_clk;
152 	void __iomem *timer_base;
153 	unsigned long clk_rate;
154 	int irq, ret;
155 
156 	timer_base = of_iomap(np, 0);
157 	if (!timer_base) {
158 		pr_err("Failed to iomap\n");
159 		return -ENXIO;
160 	}
161 
162 	/*
163 	 * PIT0 and PIT1 can be chained to build a 64-bit timer,
164 	 * so choose PIT2 as clocksource, PIT3 as clockevent device,
165 	 * and leave PIT0 and PIT1 unused for anyone else who needs them.
166 	 */
167 	clksrc_base = timer_base + PITn_OFFSET(2);
168 	clkevt_base = timer_base + PITn_OFFSET(3);
169 
170 	irq = irq_of_parse_and_map(np, 0);
171 	if (irq <= 0)
172 		return -EINVAL;
173 
174 	pit_clk = of_clk_get(np, 0);
175 	if (IS_ERR(pit_clk))
176 		return PTR_ERR(pit_clk);
177 
178 	ret = clk_prepare_enable(pit_clk);
179 	if (ret)
180 		return ret;
181 
182 	clk_rate = clk_get_rate(pit_clk);
183 	cycle_per_jiffy = clk_rate / (HZ);
184 
185 	/* enable the pit module */
186 	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
187 
188 	ret = pit_clocksource_init(clk_rate);
189 	if (ret)
190 		return ret;
191 
192 	return pit_clockevent_init(clk_rate, irq);
193 }
194 TIMER_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);
195