xref: /openbmc/linux/drivers/gpio/gpio-pca953x.c (revision 3d0957b0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  PCA953x 4/8/16/24/40 bit I/O ports
4  *
5  *  Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
6  *  Copyright (C) 2007 Marvell International Ltd.
7  *
8  *  Derived from drivers/i2c/chips/pca9539.c
9  */
10 
11 #include <linux/acpi.h>
12 #include <linux/bitmap.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/gpio/driver.h>
15 #include <linux/i2c.h>
16 #include <linux/init.h>
17 #include <linux/interrupt.h>
18 #include <linux/module.h>
19 #include <linux/of_platform.h>
20 #include <linux/platform_data/pca953x.h>
21 #include <linux/regmap.h>
22 #include <linux/regulator/consumer.h>
23 #include <linux/seq_file.h>
24 #include <linux/slab.h>
25 
26 #include <asm/unaligned.h>
27 
28 #define PCA953X_INPUT		0x00
29 #define PCA953X_OUTPUT		0x01
30 #define PCA953X_INVERT		0x02
31 #define PCA953X_DIRECTION	0x03
32 
33 #define REG_ADDR_MASK		GENMASK(5, 0)
34 #define REG_ADDR_EXT		BIT(6)
35 #define REG_ADDR_AI		BIT(7)
36 
37 #define PCA957X_IN		0x00
38 #define PCA957X_INVRT		0x01
39 #define PCA957X_BKEN		0x02
40 #define PCA957X_PUPD		0x03
41 #define PCA957X_CFG		0x04
42 #define PCA957X_OUT		0x05
43 #define PCA957X_MSK		0x06
44 #define PCA957X_INTS		0x07
45 
46 #define PCAL953X_OUT_STRENGTH	0x20
47 #define PCAL953X_IN_LATCH	0x22
48 #define PCAL953X_PULL_EN	0x23
49 #define PCAL953X_PULL_SEL	0x24
50 #define PCAL953X_INT_MASK	0x25
51 #define PCAL953X_INT_STAT	0x26
52 #define PCAL953X_OUT_CONF	0x27
53 
54 #define PCAL6524_INT_EDGE	0x28
55 #define PCAL6524_INT_CLR	0x2a
56 #define PCAL6524_IN_STATUS	0x2b
57 #define PCAL6524_OUT_INDCONF	0x2c
58 #define PCAL6524_DEBOUNCE	0x2d
59 
60 #define PCA_GPIO_MASK		GENMASK(7, 0)
61 
62 #define PCAL_GPIO_MASK		GENMASK(4, 0)
63 #define PCAL_PINCTRL_MASK	GENMASK(6, 5)
64 
65 #define PCA_INT			BIT(8)
66 #define PCA_PCAL		BIT(9)
67 #define PCA_LATCH_INT		(PCA_PCAL | PCA_INT)
68 #define PCA953X_TYPE		BIT(12)
69 #define PCA957X_TYPE		BIT(13)
70 #define PCAL653X_TYPE		BIT(14)
71 #define PCA_TYPE_MASK		GENMASK(15, 12)
72 
73 #define PCA_CHIP_TYPE(x)	((x) & PCA_TYPE_MASK)
74 
75 static const struct i2c_device_id pca953x_id[] = {
76 	{ "pca6408", 8  | PCA953X_TYPE | PCA_INT, },
77 	{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
78 	{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
79 	{ "pca9506", 40 | PCA953X_TYPE | PCA_INT, },
80 	{ "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
81 	{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
82 	{ "pca9536", 4  | PCA953X_TYPE, },
83 	{ "pca9537", 4  | PCA953X_TYPE | PCA_INT, },
84 	{ "pca9538", 8  | PCA953X_TYPE | PCA_INT, },
85 	{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
86 	{ "pca9554", 8  | PCA953X_TYPE | PCA_INT, },
87 	{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
88 	{ "pca9556", 8  | PCA953X_TYPE, },
89 	{ "pca9557", 8  | PCA953X_TYPE, },
90 	{ "pca9574", 8  | PCA957X_TYPE | PCA_INT, },
91 	{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
92 	{ "pca9698", 40 | PCA953X_TYPE, },
93 
94 	{ "pcal6408", 8 | PCA953X_TYPE | PCA_LATCH_INT, },
95 	{ "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
96 	{ "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
97 	{ "pcal6534", 34 | PCAL653X_TYPE | PCA_LATCH_INT, },
98 	{ "pcal9535", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
99 	{ "pcal9554b", 8  | PCA953X_TYPE | PCA_LATCH_INT, },
100 	{ "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
101 
102 	{ "max7310", 8  | PCA953X_TYPE, },
103 	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
104 	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
105 	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
106 	{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
107 	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
108 	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
109 	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
110 	{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
111 	{ "tca9538", 8  | PCA953X_TYPE | PCA_INT, },
112 	{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
113 	{ "tca9554", 8  | PCA953X_TYPE | PCA_INT, },
114 	{ "xra1202", 8  | PCA953X_TYPE },
115 	{ }
116 };
117 MODULE_DEVICE_TABLE(i2c, pca953x_id);
118 
119 #ifdef CONFIG_GPIO_PCA953X_IRQ
120 
121 #include <linux/dmi.h>
122 
123 static const struct acpi_gpio_params pca953x_irq_gpios = { 0, 0, true };
124 
125 static const struct acpi_gpio_mapping pca953x_acpi_irq_gpios[] = {
126 	{ "irq-gpios", &pca953x_irq_gpios, 1, ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER },
127 	{ }
128 };
129 
pca953x_acpi_get_irq(struct device * dev)130 static int pca953x_acpi_get_irq(struct device *dev)
131 {
132 	int ret;
133 
134 	ret = devm_acpi_dev_add_driver_gpios(dev, pca953x_acpi_irq_gpios);
135 	if (ret)
136 		dev_warn(dev, "can't add GPIO ACPI mapping\n");
137 
138 	ret = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(dev), "irq-gpios", 0);
139 	if (ret < 0)
140 		return ret;
141 
142 	dev_info(dev, "ACPI interrupt quirk (IRQ %d)\n", ret);
143 	return ret;
144 }
145 
146 static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
147 	{
148 		/*
149 		 * On Intel Galileo Gen 2 board the IRQ pin of one of
150 		 * the I²C GPIO expanders, which has GpioInt() resource,
151 		 * is provided as an absolute number instead of being
152 		 * relative. Since first controller (gpio-sch.c) and
153 		 * second (gpio-dwapb.c) are at the fixed bases, we may
154 		 * safely refer to the number in the global space to get
155 		 * an IRQ out of it.
156 		 */
157 		.matches = {
158 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
159 		},
160 	},
161 	{}
162 };
163 #endif
164 
165 static const struct acpi_device_id pca953x_acpi_ids[] = {
166 	{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
167 	{ }
168 };
169 MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
170 
171 #define MAX_BANK 5
172 #define BANK_SZ 8
173 #define MAX_LINE	(MAX_BANK * BANK_SZ)
174 
175 #define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
176 
177 struct pca953x_reg_config {
178 	int direction;
179 	int output;
180 	int input;
181 	int invert;
182 };
183 
184 static const struct pca953x_reg_config pca953x_regs = {
185 	.direction = PCA953X_DIRECTION,
186 	.output = PCA953X_OUTPUT,
187 	.input = PCA953X_INPUT,
188 	.invert = PCA953X_INVERT,
189 };
190 
191 static const struct pca953x_reg_config pca957x_regs = {
192 	.direction = PCA957X_CFG,
193 	.output = PCA957X_OUT,
194 	.input = PCA957X_IN,
195 	.invert = PCA957X_INVRT,
196 };
197 
198 struct pca953x_chip {
199 	unsigned gpio_start;
200 	struct mutex i2c_lock;
201 	struct regmap *regmap;
202 
203 #ifdef CONFIG_GPIO_PCA953X_IRQ
204 	struct mutex irq_lock;
205 	DECLARE_BITMAP(irq_mask, MAX_LINE);
206 	DECLARE_BITMAP(irq_stat, MAX_LINE);
207 	DECLARE_BITMAP(irq_trig_raise, MAX_LINE);
208 	DECLARE_BITMAP(irq_trig_fall, MAX_LINE);
209 #endif
210 	atomic_t wakeup_path;
211 
212 	struct i2c_client *client;
213 	struct gpio_chip gpio_chip;
214 	const char *const *names;
215 	unsigned long driver_data;
216 	struct regulator *regulator;
217 
218 	const struct pca953x_reg_config *regs;
219 
220 	u8 (*recalc_addr)(struct pca953x_chip *chip, int reg, int off);
221 	bool (*check_reg)(struct pca953x_chip *chip, unsigned int reg,
222 			  u32 checkbank);
223 };
224 
pca953x_bank_shift(struct pca953x_chip * chip)225 static int pca953x_bank_shift(struct pca953x_chip *chip)
226 {
227 	return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
228 }
229 
230 #define PCA953x_BANK_INPUT	BIT(0)
231 #define PCA953x_BANK_OUTPUT	BIT(1)
232 #define PCA953x_BANK_POLARITY	BIT(2)
233 #define PCA953x_BANK_CONFIG	BIT(3)
234 
235 #define PCA957x_BANK_INPUT	BIT(0)
236 #define PCA957x_BANK_POLARITY	BIT(1)
237 #define PCA957x_BANK_BUSHOLD	BIT(2)
238 #define PCA957x_BANK_CONFIG	BIT(4)
239 #define PCA957x_BANK_OUTPUT	BIT(5)
240 
241 #define PCAL9xxx_BANK_IN_LATCH	BIT(8 + 2)
242 #define PCAL9xxx_BANK_PULL_EN	BIT(8 + 3)
243 #define PCAL9xxx_BANK_PULL_SEL	BIT(8 + 4)
244 #define PCAL9xxx_BANK_IRQ_MASK	BIT(8 + 5)
245 #define PCAL9xxx_BANK_IRQ_STAT	BIT(8 + 6)
246 
247 /*
248  * We care about the following registers:
249  * - Standard set, below 0x40, each port can be replicated up to 8 times
250  *   - PCA953x standard
251  *     Input port			0x00 + 0 * bank_size	R
252  *     Output port			0x00 + 1 * bank_size	RW
253  *     Polarity Inversion port		0x00 + 2 * bank_size	RW
254  *     Configuration port		0x00 + 3 * bank_size	RW
255  *   - PCA957x with mixed up registers
256  *     Input port			0x00 + 0 * bank_size	R
257  *     Polarity Inversion port		0x00 + 1 * bank_size	RW
258  *     Bus hold port			0x00 + 2 * bank_size	RW
259  *     Configuration port		0x00 + 4 * bank_size	RW
260  *     Output port			0x00 + 5 * bank_size	RW
261  *
262  * - Extended set, above 0x40, often chip specific.
263  *   - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
264  *     Input latch register		0x40 + 2 * bank_size	RW
265  *     Pull-up/pull-down enable reg	0x40 + 3 * bank_size    RW
266  *     Pull-up/pull-down select reg	0x40 + 4 * bank_size    RW
267  *     Interrupt mask register		0x40 + 5 * bank_size	RW
268  *     Interrupt status register	0x40 + 6 * bank_size	R
269  *
270  * - Registers with bit 0x80 set, the AI bit
271  *   The bit is cleared and the registers fall into one of the
272  *   categories above.
273  */
274 
pca953x_check_register(struct pca953x_chip * chip,unsigned int reg,u32 checkbank)275 static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
276 				   u32 checkbank)
277 {
278 	int bank_shift = pca953x_bank_shift(chip);
279 	int bank = (reg & REG_ADDR_MASK) >> bank_shift;
280 	int offset = reg & (BIT(bank_shift) - 1);
281 
282 	/* Special PCAL extended register check. */
283 	if (reg & REG_ADDR_EXT) {
284 		if (!(chip->driver_data & PCA_PCAL))
285 			return false;
286 		bank += 8;
287 	}
288 
289 	/* Register is not in the matching bank. */
290 	if (!(BIT(bank) & checkbank))
291 		return false;
292 
293 	/* Register is not within allowed range of bank. */
294 	if (offset >= NBANK(chip))
295 		return false;
296 
297 	return true;
298 }
299 
300 /*
301  * Unfortunately, whilst the PCAL6534 chip (and compatibles) broadly follow the
302  * same register layout as the PCAL6524, the spacing of the registers has been
303  * fundamentally altered by compacting them and thus does not obey the same
304  * rules, including being able to use bit shifting to determine bank. These
305  * chips hence need special handling here.
306  */
pcal6534_check_register(struct pca953x_chip * chip,unsigned int reg,u32 checkbank)307 static bool pcal6534_check_register(struct pca953x_chip *chip, unsigned int reg,
308 				    u32 checkbank)
309 {
310 	int bank_shift;
311 	int bank;
312 	int offset;
313 
314 	if (reg >= 0x54) {
315 		/*
316 		 * Handle lack of reserved registers after output port
317 		 * configuration register to form a bank.
318 		 */
319 		reg -= 0x54;
320 		bank_shift = 16;
321 	} else if (reg >= 0x30) {
322 		/*
323 		 * Reserved block between 14h and 2Fh does not align on
324 		 * expected bank boundaries like other devices.
325 		 */
326 		reg -= 0x30;
327 		bank_shift = 8;
328 	} else {
329 		bank_shift = 0;
330 	}
331 
332 	bank = bank_shift + reg / NBANK(chip);
333 	offset = reg % NBANK(chip);
334 
335 	/* Register is not in the matching bank. */
336 	if (!(BIT(bank) & checkbank))
337 		return false;
338 
339 	/* Register is not within allowed range of bank. */
340 	if (offset >= NBANK(chip))
341 		return false;
342 
343 	return true;
344 }
345 
pca953x_readable_register(struct device * dev,unsigned int reg)346 static bool pca953x_readable_register(struct device *dev, unsigned int reg)
347 {
348 	struct pca953x_chip *chip = dev_get_drvdata(dev);
349 	u32 bank;
350 
351 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
352 		bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
353 		       PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
354 		       PCA957x_BANK_BUSHOLD;
355 	} else {
356 		bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
357 		       PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
358 	}
359 
360 	if (chip->driver_data & PCA_PCAL) {
361 		bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
362 			PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
363 			PCAL9xxx_BANK_IRQ_STAT;
364 	}
365 
366 	return chip->check_reg(chip, reg, bank);
367 }
368 
pca953x_writeable_register(struct device * dev,unsigned int reg)369 static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
370 {
371 	struct pca953x_chip *chip = dev_get_drvdata(dev);
372 	u32 bank;
373 
374 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
375 		bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
376 			PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
377 	} else {
378 		bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
379 			PCA953x_BANK_CONFIG;
380 	}
381 
382 	if (chip->driver_data & PCA_PCAL)
383 		bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
384 			PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
385 
386 	return chip->check_reg(chip, reg, bank);
387 }
388 
pca953x_volatile_register(struct device * dev,unsigned int reg)389 static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
390 {
391 	struct pca953x_chip *chip = dev_get_drvdata(dev);
392 	u32 bank;
393 
394 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
395 		bank = PCA957x_BANK_INPUT;
396 	else
397 		bank = PCA953x_BANK_INPUT;
398 
399 	if (chip->driver_data & PCA_PCAL)
400 		bank |= PCAL9xxx_BANK_IRQ_STAT;
401 
402 	return chip->check_reg(chip, reg, bank);
403 }
404 
405 static const struct regmap_config pca953x_i2c_regmap = {
406 	.reg_bits = 8,
407 	.val_bits = 8,
408 
409 	.use_single_read = true,
410 	.use_single_write = true,
411 
412 	.readable_reg = pca953x_readable_register,
413 	.writeable_reg = pca953x_writeable_register,
414 	.volatile_reg = pca953x_volatile_register,
415 
416 	.disable_locking = true,
417 	.cache_type = REGCACHE_RBTREE,
418 	.max_register = 0x7f,
419 };
420 
421 static const struct regmap_config pca953x_ai_i2c_regmap = {
422 	.reg_bits = 8,
423 	.val_bits = 8,
424 
425 	.read_flag_mask = REG_ADDR_AI,
426 	.write_flag_mask = REG_ADDR_AI,
427 
428 	.readable_reg = pca953x_readable_register,
429 	.writeable_reg = pca953x_writeable_register,
430 	.volatile_reg = pca953x_volatile_register,
431 
432 	.disable_locking = true,
433 	.cache_type = REGCACHE_RBTREE,
434 	.max_register = 0x7f,
435 };
436 
pca953x_recalc_addr(struct pca953x_chip * chip,int reg,int off)437 static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
438 {
439 	int bank_shift = pca953x_bank_shift(chip);
440 	int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
441 	int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
442 	u8 regaddr = pinctrl | addr | (off / BANK_SZ);
443 
444 	return regaddr;
445 }
446 
447 /*
448  * The PCAL6534 and compatible chips have altered bank alignment that doesn't
449  * fit within the bit shifting scheme used for other devices.
450  */
pcal6534_recalc_addr(struct pca953x_chip * chip,int reg,int off)451 static u8 pcal6534_recalc_addr(struct pca953x_chip *chip, int reg, int off)
452 {
453 	int addr;
454 	int pinctrl;
455 
456 	addr = (reg & PCAL_GPIO_MASK) * NBANK(chip);
457 
458 	switch (reg) {
459 	case PCAL953X_OUT_STRENGTH:
460 	case PCAL953X_IN_LATCH:
461 	case PCAL953X_PULL_EN:
462 	case PCAL953X_PULL_SEL:
463 	case PCAL953X_INT_MASK:
464 	case PCAL953X_INT_STAT:
465 		pinctrl = ((reg & PCAL_PINCTRL_MASK) >> 1) + 0x20;
466 		break;
467 	case PCAL6524_INT_EDGE:
468 	case PCAL6524_INT_CLR:
469 	case PCAL6524_IN_STATUS:
470 	case PCAL6524_OUT_INDCONF:
471 	case PCAL6524_DEBOUNCE:
472 		pinctrl = ((reg & PCAL_PINCTRL_MASK) >> 1) + 0x1c;
473 		break;
474 	default:
475 		pinctrl = 0;
476 		break;
477 	}
478 
479 	return pinctrl + addr + (off / BANK_SZ);
480 }
481 
pca953x_write_regs(struct pca953x_chip * chip,int reg,unsigned long * val)482 static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
483 {
484 	u8 regaddr = chip->recalc_addr(chip, reg, 0);
485 	u8 value[MAX_BANK];
486 	int i, ret;
487 
488 	for (i = 0; i < NBANK(chip); i++)
489 		value[i] = bitmap_get_value8(val, i * BANK_SZ);
490 
491 	ret = regmap_bulk_write(chip->regmap, regaddr, value, NBANK(chip));
492 	if (ret < 0) {
493 		dev_err(&chip->client->dev, "failed writing register\n");
494 		return ret;
495 	}
496 
497 	return 0;
498 }
499 
pca953x_read_regs(struct pca953x_chip * chip,int reg,unsigned long * val)500 static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
501 {
502 	u8 regaddr = chip->recalc_addr(chip, reg, 0);
503 	u8 value[MAX_BANK];
504 	int i, ret;
505 
506 	ret = regmap_bulk_read(chip->regmap, regaddr, value, NBANK(chip));
507 	if (ret < 0) {
508 		dev_err(&chip->client->dev, "failed reading register\n");
509 		return ret;
510 	}
511 
512 	for (i = 0; i < NBANK(chip); i++)
513 		bitmap_set_value8(val, value[i], i * BANK_SZ);
514 
515 	return 0;
516 }
517 
pca953x_gpio_direction_input(struct gpio_chip * gc,unsigned off)518 static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
519 {
520 	struct pca953x_chip *chip = gpiochip_get_data(gc);
521 	u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
522 	u8 bit = BIT(off % BANK_SZ);
523 	int ret;
524 
525 	mutex_lock(&chip->i2c_lock);
526 	ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
527 	mutex_unlock(&chip->i2c_lock);
528 	return ret;
529 }
530 
pca953x_gpio_direction_output(struct gpio_chip * gc,unsigned off,int val)531 static int pca953x_gpio_direction_output(struct gpio_chip *gc,
532 		unsigned off, int val)
533 {
534 	struct pca953x_chip *chip = gpiochip_get_data(gc);
535 	u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
536 	u8 outreg = chip->recalc_addr(chip, chip->regs->output, off);
537 	u8 bit = BIT(off % BANK_SZ);
538 	int ret;
539 
540 	mutex_lock(&chip->i2c_lock);
541 	/* set output level */
542 	ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
543 	if (ret)
544 		goto exit;
545 
546 	/* then direction */
547 	ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
548 exit:
549 	mutex_unlock(&chip->i2c_lock);
550 	return ret;
551 }
552 
pca953x_gpio_get_value(struct gpio_chip * gc,unsigned off)553 static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
554 {
555 	struct pca953x_chip *chip = gpiochip_get_data(gc);
556 	u8 inreg = chip->recalc_addr(chip, chip->regs->input, off);
557 	u8 bit = BIT(off % BANK_SZ);
558 	u32 reg_val;
559 	int ret;
560 
561 	mutex_lock(&chip->i2c_lock);
562 	ret = regmap_read(chip->regmap, inreg, &reg_val);
563 	mutex_unlock(&chip->i2c_lock);
564 	if (ret < 0)
565 		return ret;
566 
567 	return !!(reg_val & bit);
568 }
569 
pca953x_gpio_set_value(struct gpio_chip * gc,unsigned off,int val)570 static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
571 {
572 	struct pca953x_chip *chip = gpiochip_get_data(gc);
573 	u8 outreg = chip->recalc_addr(chip, chip->regs->output, off);
574 	u8 bit = BIT(off % BANK_SZ);
575 
576 	mutex_lock(&chip->i2c_lock);
577 	regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
578 	mutex_unlock(&chip->i2c_lock);
579 }
580 
pca953x_gpio_get_direction(struct gpio_chip * gc,unsigned off)581 static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
582 {
583 	struct pca953x_chip *chip = gpiochip_get_data(gc);
584 	u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
585 	u8 bit = BIT(off % BANK_SZ);
586 	u32 reg_val;
587 	int ret;
588 
589 	mutex_lock(&chip->i2c_lock);
590 	ret = regmap_read(chip->regmap, dirreg, &reg_val);
591 	mutex_unlock(&chip->i2c_lock);
592 	if (ret < 0)
593 		return ret;
594 
595 	if (reg_val & bit)
596 		return GPIO_LINE_DIRECTION_IN;
597 
598 	return GPIO_LINE_DIRECTION_OUT;
599 }
600 
pca953x_gpio_get_multiple(struct gpio_chip * gc,unsigned long * mask,unsigned long * bits)601 static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
602 				     unsigned long *mask, unsigned long *bits)
603 {
604 	struct pca953x_chip *chip = gpiochip_get_data(gc);
605 	DECLARE_BITMAP(reg_val, MAX_LINE);
606 	int ret;
607 
608 	mutex_lock(&chip->i2c_lock);
609 	ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
610 	mutex_unlock(&chip->i2c_lock);
611 	if (ret)
612 		return ret;
613 
614 	bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
615 	return 0;
616 }
617 
pca953x_gpio_set_multiple(struct gpio_chip * gc,unsigned long * mask,unsigned long * bits)618 static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
619 				      unsigned long *mask, unsigned long *bits)
620 {
621 	struct pca953x_chip *chip = gpiochip_get_data(gc);
622 	DECLARE_BITMAP(reg_val, MAX_LINE);
623 	int ret;
624 
625 	mutex_lock(&chip->i2c_lock);
626 	ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
627 	if (ret)
628 		goto exit;
629 
630 	bitmap_replace(reg_val, reg_val, bits, mask, gc->ngpio);
631 
632 	pca953x_write_regs(chip, chip->regs->output, reg_val);
633 exit:
634 	mutex_unlock(&chip->i2c_lock);
635 }
636 
pca953x_gpio_set_pull_up_down(struct pca953x_chip * chip,unsigned int offset,unsigned long config)637 static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
638 					 unsigned int offset,
639 					 unsigned long config)
640 {
641 	enum pin_config_param param = pinconf_to_config_param(config);
642 
643 	u8 pull_en_reg = chip->recalc_addr(chip, PCAL953X_PULL_EN, offset);
644 	u8 pull_sel_reg = chip->recalc_addr(chip, PCAL953X_PULL_SEL, offset);
645 	u8 bit = BIT(offset % BANK_SZ);
646 	int ret;
647 
648 	/*
649 	 * pull-up/pull-down configuration requires PCAL extended
650 	 * registers
651 	 */
652 	if (!(chip->driver_data & PCA_PCAL))
653 		return -ENOTSUPP;
654 
655 	mutex_lock(&chip->i2c_lock);
656 
657 	/* Configure pull-up/pull-down */
658 	if (param == PIN_CONFIG_BIAS_PULL_UP)
659 		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
660 	else if (param == PIN_CONFIG_BIAS_PULL_DOWN)
661 		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
662 	else
663 		ret = 0;
664 	if (ret)
665 		goto exit;
666 
667 	/* Disable/Enable pull-up/pull-down */
668 	if (param == PIN_CONFIG_BIAS_DISABLE)
669 		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
670 	else
671 		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
672 
673 exit:
674 	mutex_unlock(&chip->i2c_lock);
675 	return ret;
676 }
677 
pca953x_gpio_set_config(struct gpio_chip * gc,unsigned int offset,unsigned long config)678 static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
679 				   unsigned long config)
680 {
681 	struct pca953x_chip *chip = gpiochip_get_data(gc);
682 
683 	switch (pinconf_to_config_param(config)) {
684 	case PIN_CONFIG_BIAS_PULL_UP:
685 	case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
686 	case PIN_CONFIG_BIAS_PULL_DOWN:
687 	case PIN_CONFIG_BIAS_DISABLE:
688 		return pca953x_gpio_set_pull_up_down(chip, offset, config);
689 	default:
690 		return -ENOTSUPP;
691 	}
692 }
693 
pca953x_setup_gpio(struct pca953x_chip * chip,int gpios)694 static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
695 {
696 	struct gpio_chip *gc;
697 
698 	gc = &chip->gpio_chip;
699 
700 	gc->direction_input  = pca953x_gpio_direction_input;
701 	gc->direction_output = pca953x_gpio_direction_output;
702 	gc->get = pca953x_gpio_get_value;
703 	gc->set = pca953x_gpio_set_value;
704 	gc->get_direction = pca953x_gpio_get_direction;
705 	gc->get_multiple = pca953x_gpio_get_multiple;
706 	gc->set_multiple = pca953x_gpio_set_multiple;
707 	gc->set_config = pca953x_gpio_set_config;
708 	gc->can_sleep = true;
709 
710 	gc->base = chip->gpio_start;
711 	gc->ngpio = gpios;
712 	gc->label = dev_name(&chip->client->dev);
713 	gc->parent = &chip->client->dev;
714 	gc->owner = THIS_MODULE;
715 	gc->names = chip->names;
716 }
717 
718 #ifdef CONFIG_GPIO_PCA953X_IRQ
pca953x_irq_mask(struct irq_data * d)719 static void pca953x_irq_mask(struct irq_data *d)
720 {
721 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
722 	struct pca953x_chip *chip = gpiochip_get_data(gc);
723 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
724 
725 	clear_bit(hwirq, chip->irq_mask);
726 	gpiochip_disable_irq(gc, hwirq);
727 }
728 
pca953x_irq_unmask(struct irq_data * d)729 static void pca953x_irq_unmask(struct irq_data *d)
730 {
731 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
732 	struct pca953x_chip *chip = gpiochip_get_data(gc);
733 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
734 
735 	gpiochip_enable_irq(gc, hwirq);
736 	set_bit(hwirq, chip->irq_mask);
737 }
738 
pca953x_irq_set_wake(struct irq_data * d,unsigned int on)739 static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
740 {
741 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
742 	struct pca953x_chip *chip = gpiochip_get_data(gc);
743 
744 	if (on)
745 		atomic_inc(&chip->wakeup_path);
746 	else
747 		atomic_dec(&chip->wakeup_path);
748 
749 	return irq_set_irq_wake(chip->client->irq, on);
750 }
751 
pca953x_irq_bus_lock(struct irq_data * d)752 static void pca953x_irq_bus_lock(struct irq_data *d)
753 {
754 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
755 	struct pca953x_chip *chip = gpiochip_get_data(gc);
756 
757 	mutex_lock(&chip->irq_lock);
758 }
759 
pca953x_irq_bus_sync_unlock(struct irq_data * d)760 static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
761 {
762 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
763 	struct pca953x_chip *chip = gpiochip_get_data(gc);
764 	DECLARE_BITMAP(irq_mask, MAX_LINE);
765 	DECLARE_BITMAP(reg_direction, MAX_LINE);
766 	int level;
767 
768 	if (chip->driver_data & PCA_PCAL) {
769 		/* Enable latch on interrupt-enabled inputs */
770 		pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
771 
772 		bitmap_complement(irq_mask, chip->irq_mask, gc->ngpio);
773 
774 		/* Unmask enabled interrupts */
775 		pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
776 	}
777 
778 	/* Switch direction to input if needed */
779 	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
780 
781 	bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
782 	bitmap_complement(reg_direction, reg_direction, gc->ngpio);
783 	bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
784 
785 	/* Look for any newly setup interrupt */
786 	for_each_set_bit(level, irq_mask, gc->ngpio)
787 		pca953x_gpio_direction_input(&chip->gpio_chip, level);
788 
789 	mutex_unlock(&chip->irq_lock);
790 }
791 
pca953x_irq_set_type(struct irq_data * d,unsigned int type)792 static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
793 {
794 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
795 	struct pca953x_chip *chip = gpiochip_get_data(gc);
796 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
797 
798 	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
799 		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
800 			d->irq, type);
801 		return -EINVAL;
802 	}
803 
804 	assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
805 	assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
806 
807 	return 0;
808 }
809 
pca953x_irq_shutdown(struct irq_data * d)810 static void pca953x_irq_shutdown(struct irq_data *d)
811 {
812 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
813 	struct pca953x_chip *chip = gpiochip_get_data(gc);
814 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
815 
816 	clear_bit(hwirq, chip->irq_trig_raise);
817 	clear_bit(hwirq, chip->irq_trig_fall);
818 }
819 
pca953x_irq_print_chip(struct irq_data * data,struct seq_file * p)820 static void pca953x_irq_print_chip(struct irq_data *data, struct seq_file *p)
821 {
822 	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
823 
824 	seq_printf(p, dev_name(gc->parent));
825 }
826 
827 static const struct irq_chip pca953x_irq_chip = {
828 	.irq_mask		= pca953x_irq_mask,
829 	.irq_unmask		= pca953x_irq_unmask,
830 	.irq_set_wake		= pca953x_irq_set_wake,
831 	.irq_bus_lock		= pca953x_irq_bus_lock,
832 	.irq_bus_sync_unlock	= pca953x_irq_bus_sync_unlock,
833 	.irq_set_type		= pca953x_irq_set_type,
834 	.irq_shutdown		= pca953x_irq_shutdown,
835 	.irq_print_chip		= pca953x_irq_print_chip,
836 	.flags			= IRQCHIP_IMMUTABLE,
837 	GPIOCHIP_IRQ_RESOURCE_HELPERS,
838 };
839 
pca953x_irq_pending(struct pca953x_chip * chip,unsigned long * pending)840 static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
841 {
842 	struct gpio_chip *gc = &chip->gpio_chip;
843 	DECLARE_BITMAP(reg_direction, MAX_LINE);
844 	DECLARE_BITMAP(old_stat, MAX_LINE);
845 	DECLARE_BITMAP(cur_stat, MAX_LINE);
846 	DECLARE_BITMAP(new_stat, MAX_LINE);
847 	DECLARE_BITMAP(trigger, MAX_LINE);
848 	int ret;
849 
850 	if (chip->driver_data & PCA_PCAL) {
851 		/* Read the current interrupt status from the device */
852 		ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
853 		if (ret)
854 			return false;
855 
856 		/* Check latched inputs and clear interrupt status */
857 		ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
858 		if (ret)
859 			return false;
860 
861 		/* Apply filter for rising/falling edge selection */
862 		bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, cur_stat, gc->ngpio);
863 
864 		bitmap_and(pending, new_stat, trigger, gc->ngpio);
865 
866 		return !bitmap_empty(pending, gc->ngpio);
867 	}
868 
869 	ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
870 	if (ret)
871 		return false;
872 
873 	/* Remove output pins from the equation */
874 	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
875 
876 	bitmap_copy(old_stat, chip->irq_stat, gc->ngpio);
877 
878 	bitmap_and(new_stat, cur_stat, reg_direction, gc->ngpio);
879 	bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
880 	bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);
881 
882 	bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
883 
884 	if (bitmap_empty(trigger, gc->ngpio))
885 		return false;
886 
887 	bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
888 	bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
889 	bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
890 	bitmap_and(pending, new_stat, trigger, gc->ngpio);
891 
892 	return !bitmap_empty(pending, gc->ngpio);
893 }
894 
pca953x_irq_handler(int irq,void * devid)895 static irqreturn_t pca953x_irq_handler(int irq, void *devid)
896 {
897 	struct pca953x_chip *chip = devid;
898 	struct gpio_chip *gc = &chip->gpio_chip;
899 	DECLARE_BITMAP(pending, MAX_LINE);
900 	int level;
901 	bool ret;
902 
903 	bitmap_zero(pending, MAX_LINE);
904 
905 	mutex_lock(&chip->i2c_lock);
906 	ret = pca953x_irq_pending(chip, pending);
907 	mutex_unlock(&chip->i2c_lock);
908 
909 	if (ret) {
910 		ret = 0;
911 
912 		for_each_set_bit(level, pending, gc->ngpio) {
913 			int nested_irq = irq_find_mapping(gc->irq.domain, level);
914 
915 			if (unlikely(nested_irq <= 0)) {
916 				dev_warn_ratelimited(gc->parent, "unmapped interrupt %d\n", level);
917 				continue;
918 			}
919 
920 			handle_nested_irq(nested_irq);
921 			ret = 1;
922 		}
923 	}
924 
925 	return IRQ_RETVAL(ret);
926 }
927 
pca953x_irq_setup(struct pca953x_chip * chip,int irq_base)928 static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
929 {
930 	struct i2c_client *client = chip->client;
931 	DECLARE_BITMAP(reg_direction, MAX_LINE);
932 	DECLARE_BITMAP(irq_stat, MAX_LINE);
933 	struct gpio_irq_chip *girq;
934 	int ret;
935 
936 	if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
937 		ret = pca953x_acpi_get_irq(&client->dev);
938 		if (ret > 0)
939 			client->irq = ret;
940 	}
941 
942 	if (!client->irq)
943 		return 0;
944 
945 	if (irq_base == -1)
946 		return 0;
947 
948 	if (!(chip->driver_data & PCA_INT))
949 		return 0;
950 
951 	ret = pca953x_read_regs(chip, chip->regs->input, irq_stat);
952 	if (ret)
953 		return ret;
954 
955 	/*
956 	 * There is no way to know which GPIO line generated the
957 	 * interrupt.  We have to rely on the previous read for
958 	 * this purpose.
959 	 */
960 	pca953x_read_regs(chip, chip->regs->direction, reg_direction);
961 	bitmap_and(chip->irq_stat, irq_stat, reg_direction, chip->gpio_chip.ngpio);
962 	mutex_init(&chip->irq_lock);
963 
964 	girq = &chip->gpio_chip.irq;
965 	gpio_irq_chip_set_chip(girq, &pca953x_irq_chip);
966 	/* This will let us handle the parent IRQ in the driver */
967 	girq->parent_handler = NULL;
968 	girq->num_parents = 0;
969 	girq->parents = NULL;
970 	girq->default_type = IRQ_TYPE_NONE;
971 	girq->handler = handle_simple_irq;
972 	girq->threaded = true;
973 	girq->first = irq_base; /* FIXME: get rid of this */
974 
975 	ret = devm_request_threaded_irq(&client->dev, client->irq,
976 					NULL, pca953x_irq_handler,
977 					IRQF_ONESHOT | IRQF_SHARED,
978 					dev_name(&client->dev), chip);
979 	if (ret) {
980 		dev_err(&client->dev, "failed to request irq %d\n",
981 			client->irq);
982 		return ret;
983 	}
984 
985 	return 0;
986 }
987 
988 #else /* CONFIG_GPIO_PCA953X_IRQ */
pca953x_irq_setup(struct pca953x_chip * chip,int irq_base)989 static int pca953x_irq_setup(struct pca953x_chip *chip,
990 			     int irq_base)
991 {
992 	struct i2c_client *client = chip->client;
993 
994 	if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
995 		dev_warn(&client->dev, "interrupt support not compiled in\n");
996 
997 	return 0;
998 }
999 #endif
1000 
device_pca95xx_init(struct pca953x_chip * chip,u32 invert)1001 static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
1002 {
1003 	DECLARE_BITMAP(val, MAX_LINE);
1004 	u8 regaddr;
1005 	int ret;
1006 
1007 	regaddr = chip->recalc_addr(chip, chip->regs->output, 0);
1008 	ret = regcache_sync_region(chip->regmap, regaddr,
1009 				   regaddr + NBANK(chip) - 1);
1010 	if (ret)
1011 		goto out;
1012 
1013 	regaddr = chip->recalc_addr(chip, chip->regs->direction, 0);
1014 	ret = regcache_sync_region(chip->regmap, regaddr,
1015 				   regaddr + NBANK(chip) - 1);
1016 	if (ret)
1017 		goto out;
1018 
1019 	/* set platform specific polarity inversion */
1020 	if (invert)
1021 		bitmap_fill(val, MAX_LINE);
1022 	else
1023 		bitmap_zero(val, MAX_LINE);
1024 
1025 	ret = pca953x_write_regs(chip, chip->regs->invert, val);
1026 out:
1027 	return ret;
1028 }
1029 
device_pca957x_init(struct pca953x_chip * chip,u32 invert)1030 static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
1031 {
1032 	DECLARE_BITMAP(val, MAX_LINE);
1033 	unsigned int i;
1034 	int ret;
1035 
1036 	ret = device_pca95xx_init(chip, invert);
1037 	if (ret)
1038 		goto out;
1039 
1040 	/* To enable register 6, 7 to control pull up and pull down */
1041 	for (i = 0; i < NBANK(chip); i++)
1042 		bitmap_set_value8(val, 0x02, i * BANK_SZ);
1043 
1044 	ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
1045 	if (ret)
1046 		goto out;
1047 
1048 	return 0;
1049 out:
1050 	return ret;
1051 }
1052 
pca953x_probe(struct i2c_client * client)1053 static int pca953x_probe(struct i2c_client *client)
1054 {
1055 	struct pca953x_platform_data *pdata;
1056 	struct pca953x_chip *chip;
1057 	int irq_base = 0;
1058 	int ret;
1059 	u32 invert = 0;
1060 	struct regulator *reg;
1061 	const struct regmap_config *regmap_config;
1062 
1063 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
1064 	if (chip == NULL)
1065 		return -ENOMEM;
1066 
1067 	pdata = dev_get_platdata(&client->dev);
1068 	if (pdata) {
1069 		irq_base = pdata->irq_base;
1070 		chip->gpio_start = pdata->gpio_base;
1071 		invert = pdata->invert;
1072 		chip->names = pdata->names;
1073 	} else {
1074 		struct gpio_desc *reset_gpio;
1075 
1076 		chip->gpio_start = -1;
1077 		irq_base = 0;
1078 
1079 		/*
1080 		 * See if we need to de-assert a reset pin.
1081 		 *
1082 		 * There is no known ACPI-enabled platforms that are
1083 		 * using "reset" GPIO. Otherwise any of those platform
1084 		 * must use _DSD method with corresponding property.
1085 		 */
1086 		reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
1087 						     GPIOD_OUT_LOW);
1088 		if (IS_ERR(reset_gpio))
1089 			return PTR_ERR(reset_gpio);
1090 	}
1091 
1092 	chip->client = client;
1093 	chip->driver_data = (uintptr_t)i2c_get_match_data(client);
1094 	if (!chip->driver_data)
1095 		return -ENODEV;
1096 
1097 	reg = devm_regulator_get(&client->dev, "vcc");
1098 	if (IS_ERR(reg))
1099 		return dev_err_probe(&client->dev, PTR_ERR(reg), "reg get err\n");
1100 
1101 	ret = regulator_enable(reg);
1102 	if (ret) {
1103 		dev_err(&client->dev, "reg en err: %d\n", ret);
1104 		return ret;
1105 	}
1106 	chip->regulator = reg;
1107 
1108 	i2c_set_clientdata(client, chip);
1109 
1110 	pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
1111 
1112 	if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
1113 		dev_info(&client->dev, "using AI\n");
1114 		regmap_config = &pca953x_ai_i2c_regmap;
1115 	} else {
1116 		dev_info(&client->dev, "using no AI\n");
1117 		regmap_config = &pca953x_i2c_regmap;
1118 	}
1119 
1120 	if (PCA_CHIP_TYPE(chip->driver_data) == PCAL653X_TYPE) {
1121 		chip->recalc_addr = pcal6534_recalc_addr;
1122 		chip->check_reg = pcal6534_check_register;
1123 	} else {
1124 		chip->recalc_addr = pca953x_recalc_addr;
1125 		chip->check_reg = pca953x_check_register;
1126 	}
1127 
1128 	chip->regmap = devm_regmap_init_i2c(client, regmap_config);
1129 	if (IS_ERR(chip->regmap)) {
1130 		ret = PTR_ERR(chip->regmap);
1131 		goto err_exit;
1132 	}
1133 
1134 	regcache_mark_dirty(chip->regmap);
1135 
1136 	mutex_init(&chip->i2c_lock);
1137 	/*
1138 	 * In case we have an i2c-mux controlled by a GPIO provided by an
1139 	 * expander using the same driver higher on the device tree, read the
1140 	 * i2c adapter nesting depth and use the retrieved value as lockdep
1141 	 * subclass for chip->i2c_lock.
1142 	 *
1143 	 * REVISIT: This solution is not complete. It protects us from lockdep
1144 	 * false positives when the expander controlling the i2c-mux is on
1145 	 * a different level on the device tree, but not when it's on the same
1146 	 * level on a different branch (in which case the subclass number
1147 	 * would be the same).
1148 	 *
1149 	 * TODO: Once a correct solution is developed, a similar fix should be
1150 	 * applied to all other i2c-controlled GPIO expanders (and potentially
1151 	 * regmap-i2c).
1152 	 */
1153 	lockdep_set_subclass(&chip->i2c_lock,
1154 			     i2c_adapter_depth(client->adapter));
1155 
1156 	/* initialize cached registers from their original values.
1157 	 * we can't share this chip with another i2c master.
1158 	 */
1159 	if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
1160 		chip->regs = &pca957x_regs;
1161 		ret = device_pca957x_init(chip, invert);
1162 	} else {
1163 		chip->regs = &pca953x_regs;
1164 		ret = device_pca95xx_init(chip, invert);
1165 	}
1166 	if (ret)
1167 		goto err_exit;
1168 
1169 	ret = pca953x_irq_setup(chip, irq_base);
1170 	if (ret)
1171 		goto err_exit;
1172 
1173 	ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
1174 	if (ret)
1175 		goto err_exit;
1176 
1177 	if (pdata && pdata->setup) {
1178 		ret = pdata->setup(client, chip->gpio_chip.base,
1179 				   chip->gpio_chip.ngpio, pdata->context);
1180 		if (ret < 0)
1181 			dev_warn(&client->dev, "setup failed, %d\n", ret);
1182 	}
1183 
1184 	return 0;
1185 
1186 err_exit:
1187 	regulator_disable(chip->regulator);
1188 	return ret;
1189 }
1190 
pca953x_remove(struct i2c_client * client)1191 static void pca953x_remove(struct i2c_client *client)
1192 {
1193 	struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
1194 	struct pca953x_chip *chip = i2c_get_clientdata(client);
1195 
1196 	if (pdata && pdata->teardown) {
1197 		pdata->teardown(client, chip->gpio_chip.base,
1198 				chip->gpio_chip.ngpio, pdata->context);
1199 	}
1200 
1201 	regulator_disable(chip->regulator);
1202 }
1203 
1204 #ifdef CONFIG_PM_SLEEP
pca953x_regcache_sync(struct device * dev)1205 static int pca953x_regcache_sync(struct device *dev)
1206 {
1207 	struct pca953x_chip *chip = dev_get_drvdata(dev);
1208 	int ret;
1209 	u8 regaddr;
1210 
1211 	/*
1212 	 * The ordering between direction and output is important,
1213 	 * sync these registers first and only then sync the rest.
1214 	 */
1215 	regaddr = chip->recalc_addr(chip, chip->regs->direction, 0);
1216 	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
1217 	if (ret) {
1218 		dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
1219 		return ret;
1220 	}
1221 
1222 	regaddr = chip->recalc_addr(chip, chip->regs->output, 0);
1223 	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
1224 	if (ret) {
1225 		dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
1226 		return ret;
1227 	}
1228 
1229 #ifdef CONFIG_GPIO_PCA953X_IRQ
1230 	if (chip->driver_data & PCA_PCAL) {
1231 		regaddr = chip->recalc_addr(chip, PCAL953X_IN_LATCH, 0);
1232 		ret = regcache_sync_region(chip->regmap, regaddr,
1233 					   regaddr + NBANK(chip) - 1);
1234 		if (ret) {
1235 			dev_err(dev, "Failed to sync INT latch registers: %d\n",
1236 				ret);
1237 			return ret;
1238 		}
1239 
1240 		regaddr = chip->recalc_addr(chip, PCAL953X_INT_MASK, 0);
1241 		ret = regcache_sync_region(chip->regmap, regaddr,
1242 					   regaddr + NBANK(chip) - 1);
1243 		if (ret) {
1244 			dev_err(dev, "Failed to sync INT mask registers: %d\n",
1245 				ret);
1246 			return ret;
1247 		}
1248 	}
1249 #endif
1250 
1251 	return 0;
1252 }
1253 
pca953x_suspend(struct device * dev)1254 static int pca953x_suspend(struct device *dev)
1255 {
1256 	struct pca953x_chip *chip = dev_get_drvdata(dev);
1257 
1258 	mutex_lock(&chip->i2c_lock);
1259 	regcache_cache_only(chip->regmap, true);
1260 	mutex_unlock(&chip->i2c_lock);
1261 
1262 	if (atomic_read(&chip->wakeup_path))
1263 		device_set_wakeup_path(dev);
1264 	else
1265 		regulator_disable(chip->regulator);
1266 
1267 	return 0;
1268 }
1269 
pca953x_resume(struct device * dev)1270 static int pca953x_resume(struct device *dev)
1271 {
1272 	struct pca953x_chip *chip = dev_get_drvdata(dev);
1273 	int ret;
1274 
1275 	if (!atomic_read(&chip->wakeup_path)) {
1276 		ret = regulator_enable(chip->regulator);
1277 		if (ret) {
1278 			dev_err(dev, "Failed to enable regulator: %d\n", ret);
1279 			return 0;
1280 		}
1281 	}
1282 
1283 	mutex_lock(&chip->i2c_lock);
1284 	regcache_cache_only(chip->regmap, false);
1285 	regcache_mark_dirty(chip->regmap);
1286 	ret = pca953x_regcache_sync(dev);
1287 	if (ret) {
1288 		mutex_unlock(&chip->i2c_lock);
1289 		return ret;
1290 	}
1291 
1292 	ret = regcache_sync(chip->regmap);
1293 	mutex_unlock(&chip->i2c_lock);
1294 	if (ret) {
1295 		dev_err(dev, "Failed to restore register map: %d\n", ret);
1296 		return ret;
1297 	}
1298 
1299 	return 0;
1300 }
1301 #endif
1302 
1303 /* convenience to stop overlong match-table lines */
1304 #define OF_653X(__nrgpio, __int) ((void *)(__nrgpio | PCAL653X_TYPE | __int))
1305 #define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
1306 #define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
1307 
1308 static const struct of_device_id pca953x_dt_ids[] = {
1309 	{ .compatible = "nxp,pca6408", .data = OF_953X(8, PCA_INT), },
1310 	{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
1311 	{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
1312 	{ .compatible = "nxp,pca9506", .data = OF_953X(40, PCA_INT), },
1313 	{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
1314 	{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
1315 	{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
1316 	{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
1317 	{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
1318 	{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
1319 	{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
1320 	{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
1321 	{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
1322 	{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
1323 	{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
1324 	{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
1325 	{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
1326 
1327 	{ .compatible = "nxp,pcal6408", .data = OF_953X(8, PCA_LATCH_INT), },
1328 	{ .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
1329 	{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
1330 	{ .compatible = "nxp,pcal6534", .data = OF_653X(34, PCA_LATCH_INT), },
1331 	{ .compatible = "nxp,pcal9535", .data = OF_953X(16, PCA_LATCH_INT), },
1332 	{ .compatible = "nxp,pcal9554b", .data = OF_953X( 8, PCA_LATCH_INT), },
1333 	{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
1334 
1335 	{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
1336 	{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
1337 	{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
1338 	{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
1339 	{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
1340 
1341 	{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
1342 	{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
1343 	{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
1344 	{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
1345 	{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
1346 	{ .compatible = "ti,tca9538", .data = OF_953X( 8, PCA_INT), },
1347 	{ .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
1348 
1349 	{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
1350 	{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
1351 	{ .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), },
1352 
1353 	{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
1354 	{ }
1355 };
1356 
1357 MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
1358 
1359 static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
1360 
1361 static struct i2c_driver pca953x_driver = {
1362 	.driver = {
1363 		.name	= "pca953x",
1364 		.pm	= &pca953x_pm_ops,
1365 		.of_match_table = pca953x_dt_ids,
1366 		.acpi_match_table = pca953x_acpi_ids,
1367 	},
1368 	.probe		= pca953x_probe,
1369 	.remove		= pca953x_remove,
1370 	.id_table	= pca953x_id,
1371 };
1372 
pca953x_init(void)1373 static int __init pca953x_init(void)
1374 {
1375 	return i2c_add_driver(&pca953x_driver);
1376 }
1377 /* register after i2c postcore initcall and before
1378  * subsys initcalls that may rely on these GPIOs
1379  */
1380 subsys_initcall(pca953x_init);
1381 
pca953x_exit(void)1382 static void __exit pca953x_exit(void)
1383 {
1384 	i2c_del_driver(&pca953x_driver);
1385 }
1386 module_exit(pca953x_exit);
1387 
1388 MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
1389 MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
1390 MODULE_LICENSE("GPL");
1391