1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright(c) 2019 Intel Corporation. 4 */ 5 6 #ifndef __PINCTRL_EQUILIBRIUM_H 7 #define __PINCTRL_EQUILIBRIUM_H 8 9 /* PINPAD register offset */ 10 #define REG_PMX_BASE 0x0 /* Port Multiplexer Control Register */ 11 #define REG_PUEN 0x80 /* PULL UP Enable Register */ 12 #define REG_PDEN 0x84 /* PULL DOWN Enable Register */ 13 #define REG_SRC 0x88 /* Slew Rate Control Register */ 14 #define REG_DCC0 0x8C /* Drive Current Control Register 0 */ 15 #define REG_DCC1 0x90 /* Drive Current Control Register 1 */ 16 #define REG_OD 0x94 /* Open Drain Enable Register */ 17 #define REG_AVAIL 0x98 /* Pad Control Availability Register */ 18 #define DRV_CUR_PINS 16 /* Drive Current pin number per register */ 19 #define REG_DRCC(x) (REG_DCC0 + (x) * 4) /* Driver current macro */ 20 21 /* GPIO register offset */ 22 #define GPIO_OUT 0x0 /* Data Output Register */ 23 #define GPIO_IN 0x4 /* Data Input Register */ 24 #define GPIO_DIR 0x8 /* Direction Register */ 25 #define GPIO_EXINTCR0 0x18 /* External Interrupt Control Register 0 */ 26 #define GPIO_EXINTCR1 0x1C /* External Interrupt Control Register 1 */ 27 #define GPIO_IRNCR 0x20 /* IRN Capture Register */ 28 #define GPIO_IRNICR 0x24 /* IRN Interrupt Control Register */ 29 #define GPIO_IRNEN 0x28 /* IRN Interrupt Enable Register */ 30 #define GPIO_IRNCFG 0x2C /* IRN Interrupt Configuration Register */ 31 #define GPIO_IRNRNSET 0x30 /* IRN Interrupt Enable Set Register */ 32 #define GPIO_IRNENCLR 0x34 /* IRN Interrupt Enable Clear Register */ 33 #define GPIO_OUTSET 0x40 /* Output Set Register */ 34 #define GPIO_OUTCLR 0x44 /* Output Clear Register */ 35 #define GPIO_DIRSET 0x48 /* Direction Set Register */ 36 #define GPIO_DIRCLR 0x4C /* Direction Clear Register */ 37 38 /* parse given pin's driver current value */ 39 #define PARSE_DRV_CURRENT(val, pin) (((val) >> ((pin) * 2)) & 0x3) 40 41 #define GPIO_EDGE_TRIG 0 42 #define GPIO_LEVEL_TRIG 1 43 #define GPIO_SINGLE_EDGE 0 44 #define GPIO_BOTH_EDGE 1 45 #define GPIO_POSITIVE_TRIG 0 46 #define GPIO_NEGATIVE_TRIG 1 47 48 #define EQBR_GPIO_MODE 0 49 50 typedef enum { 51 OP_COUNT_NR_FUNCS, 52 OP_ADD_FUNCS, 53 OP_COUNT_NR_FUNC_GRPS, 54 OP_ADD_FUNC_GRPS, 55 OP_NONE, 56 } funcs_util_ops; 57 58 /** 59 * struct gpio_irq_type: gpio irq configuration 60 * @trig_type: level trigger or edge trigger 61 * @edge_type: sigle edge or both edge 62 * @logic_type: positive trigger or negative trigger 63 */ 64 struct gpio_irq_type { 65 unsigned int trig_type; 66 unsigned int edge_type; 67 unsigned int logic_type; 68 }; 69 70 /** 71 * struct eqbr_pmx_func: represent a pin function. 72 * @name: name of the pin function, used to lookup the function. 73 * @groups: one or more names of pin groups that provide this function. 74 * @nr_groups: number of groups included in @groups. 75 */ 76 struct eqbr_pmx_func { 77 const char *name; 78 const char **groups; 79 unsigned int nr_groups; 80 }; 81 82 /** 83 * struct eqbr_pin_bank: represent a pin bank. 84 * @membase: base address of the pin bank register. 85 * @id: bank id, to idenify the unique bank. 86 * @pin_base: starting pin number of the pin bank. 87 * @nr_pins: number of the pins of the pin bank. 88 * @aval_pinmap: available pin bitmap of the pin bank. 89 */ 90 struct eqbr_pin_bank { 91 void __iomem *membase; 92 unsigned int id; 93 unsigned int pin_base; 94 unsigned int nr_pins; 95 u32 aval_pinmap; 96 }; 97 98 struct fwnode_handle; 99 100 /** 101 * struct eqbr_gpio_ctrl: represent a gpio controller. 102 * @chip: gpio chip. 103 * @fwnode: firmware node of gpio controller. 104 * @bank: pointer to corresponding pin bank. 105 * @membase: base address of the gpio controller. 106 * @name: gpio chip name. 107 * @virq: irq number of the gpio chip to parent's irq domain. 108 * @lock: spin lock to protect gpio register write. 109 */ 110 struct eqbr_gpio_ctrl { 111 struct gpio_chip chip; 112 struct fwnode_handle *fwnode; 113 struct eqbr_pin_bank *bank; 114 void __iomem *membase; 115 const char *name; 116 unsigned int virq; 117 raw_spinlock_t lock; /* protect gpio register */ 118 }; 119 120 /** 121 * struct eqbr_pinctrl_drv_data: 122 * @dev: device instance representing the controller. 123 * @pctl_desc: pin controller descriptor. 124 * @pctl_dev: pin control class device 125 * @membase: base address of pin controller 126 * @pin_banks: list of pin banks of the driver. 127 * @nr_banks: number of pin banks. 128 * @gpio_ctrls: list of gpio controllers. 129 * @nr_gpio_ctrls: number of gpio controllers. 130 * @lock: protect pinctrl register write 131 */ 132 struct eqbr_pinctrl_drv_data { 133 struct device *dev; 134 struct pinctrl_desc pctl_desc; 135 struct pinctrl_dev *pctl_dev; 136 void __iomem *membase; 137 struct eqbr_pin_bank *pin_banks; 138 unsigned int nr_banks; 139 struct eqbr_gpio_ctrl *gpio_ctrls; 140 unsigned int nr_gpio_ctrls; 141 raw_spinlock_t lock; /* protect pinpad register */ 142 }; 143 144 #endif /* __PINCTRL_EQUILIBRIUM_H */ 145