xref: /openbmc/u-boot/board/renesas/stout/cpld.h (revision e8f80a5a)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Stout board CPLD definition
4  *
5  * Copyright (C) 2015 Renesas Electronics Europe GmbH
6  * Copyright (C) 2015 Renesas Electronics Corporation
7  * Copyright (C) 2015 Cogent Embedded, Inc.
8  */
9 
10 #ifndef _CPLD_H_
11 #define _CPLD_H_
12 
13 /* power-up behaviour */
14 #define MODE_MSK_FREE_RUN		0x00000001
15 #define MODE_VAL_FREE_RUN		0x00000000
16 #define MODE_MSK_STEP_UP		0x00000001
17 #define MODE_VAL_STEP_UP		0x00000000
18 
19 /* boot source */
20 #define MODE_MSK_BOOT_SQPI_16KB_FAST	0x0000000E
21 #define MODE_VAL_BOOT_SQPI_16KB_FAST	0x00000004
22 #define MODE_MSK_BOOT_SQPI_16KB_SLOW	0x0000000E
23 #define MODE_VAL_BOOT_SQPI_16KB_SLOW	0x00000008
24 #define MODE_MSK_BOOT_SQPI_4KB_SLOW	0x0000000E
25 #define MODE_VAL_BOOT_SQPI_4KB_SLOW	0x0000000C
26 
27 /* booting CPU */
28 #define MODE_MSK_BOOT_CA15		0x000000C0
29 #define MODE_VAL_BOOT_CA15		0x00000000
30 #define MODE_MSK_BOOT_CA7		0x000000C0
31 #define MODE_VAL_BOOT_CA7		0x00000040
32 #define MODE_MSK_BOOT_SH4		0x000000C0
33 #define MODE_VAL_BOOT_SH4		0x000000C0
34 
35 /* JTAG connection */
36 #define MODE_MSK_JTAG_CORESIGHT		0xC0301C00
37 #define MODE_VAL_JTAG_CORESIGHT		0x00200000
38 #define MODE_MSK_JTAG_SH4		0xC0301C00
39 #define MODE_VAL_JTAG_SH4		0x00300000
40 
41 /* DDR3 (PLL) speed */
42 #define MODE_MSK_DDR3_1600		0x00080000
43 #define MODE_VAL_DDR3_1600		0x00000000
44 #define MODE_MSK_DDR3_1333		0x00080000
45 #define MODE_VAL_DDR3_1333		0x00080000
46 
47 /* ComboPhy0 mode */
48 #define MODE_MSK_PHY0_SATA0		0x01000000
49 #define MODE_VAL_PHY0_SATA0		0x00000000
50 #define MODE_MSK_PHY0_PCIE		0x01000000
51 #define MODE_VAL_PHY0_PCIE		0x01000000
52 
53 /* ComboPhy1 mode */
54 #define MODE_MSK_PHY1_SATA1		0x00800000
55 #define MODE_VAL_PHY1_SATA1		0x00000000
56 #define MODE_MSK_PHY1_USB3		0x00800000
57 #define MODE_VAL_PHY1_USB3		0x00800000
58 
59 /*
60  * Illegal multiplexer combinations.
61  *    MUX                      Conflicts
62  *    name                  with any one of
63  * VIN0_BT656            VIN0_full, SD2
64  * VIN0_full             VIN0_BT656, SD2, AVB, VIN2_(all)
65  * VIN1_BT656            VIN1_(others), SD0
66  * VIN1_10bit            VIN1_(others), SD0, VIN3_with*, I2C1
67  * VIN1_12bit            VIN1_(others), SD0, VIN3_with*, I2C1, SCIFA0_(all)
68  * VIN2_BT656            VIN0_full, VIN2_(others), AVB,
69  * VIN2_withSYNC         VIN0_full, VIN2_(others), AVB, I2C1, SCIFA0_(all),
70  *                       VIN3_with*
71  * VIN2_withFIELD        VIN0_full, VIN2_(others), AVB, SQPI_(all)
72  * VIN2_withSYNCandFIELD VIN0_full, VIN2_(others), AVB, SQPI_(all), I2C1,
73  *                       SCIFA0_(all), VIN3_with*
74  * VIN3_BT656            VIN3_(others), IRQ3
75  * VIN3_withFIELD        VIN3_(others), IRQ3, VIN1_12bit, VIN2_withSYNC,
76  *                       VIN2_withSYNCandFIELD, VIN1_10bit
77  * VIN3_withSYNCandFIELD VIN3_(others), IRQ3, VIN1_12bit, VIN2_withSYNC,
78  *                       VIN2_withSYNCandFIELD, VIN1_10bit, I2C1
79  * AVB                   VIN0_full, VIN2_(all)
80  * QSPI_ONBOARD          VIN2_withFIELD, VIN2_withSYNCandFIELD, QSPI_COMEXPRESS
81  * QSPI_COMEXPRESS       VIN2_withFIELD, VIN2_withSYNCandFIELD, QSPI_ONBOARD
82  * I2C1                  VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD,
83  *                       VIN3_withSYNCandFIELD
84  * IRQ3                  VIN3_(all)
85  * SCIFA0_USB            VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD,
86  *                       SCIFA0_COMEXPRESS
87  * SCIFA0_COMEXPRESS     VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD,
88  *                       SCIFA0_USB
89  * SCIFA2                PWM210
90  * ETH_ONBOARD           ETH_COMEXPRESS
91  * ETH_COMEXPRESS        ETH_ONBOARD
92  * SD0                   VIN1_(all)
93  * SD2                   VIN0_(all)
94  * PWM210                SCIFA2
95  */
96 
97 /* connected to COM Express connector and CN6 for camera, BT656 only */
98 #define MUX_MSK_VIN0_BT656		0x00001001
99 #define MUX_VAL_VIN0_BT656		0x00000000
100 /* connected to COM Express connector and CN6 for camera, all modes */
101 #define MUX_MSK_VIN0_full		0x00001007
102 #define MUX_VAL_VIN0_full		0x00000002
103 /* connected to COM Express connector, BT656 only */
104 #define MUX_MSK_VIN1_BT656		0x00000801
105 #define MUX_VAL_VIN1_BT656		0x00000800
106 /* connected to COM Express connector, all 10-bit modes */
107 #define MUX_MSK_VIN1_10bit		0x00000821
108 #define MUX_VAL_VIN1_10bit		0x00000800
109 /* connected to COM Express connector, all 12-bit modes */
110 #define MUX_MSK_VIN1_12bit		0x000008A1
111 #define MUX_VAL_VIN1_12bit		0x00000880
112 /* connected to COM Express connector, BT656 only */
113 #define MUX_MSK_VIN2_BT656		0x00000007
114 #define MUX_VAL_VIN2_BT656		0x00000006
115 /* connected to COM Express connector, modes with sync signals */
116 #define MUX_MSK_VIN2_withSYNC		0x000000A7
117 #define MUX_VAL_VIN2_withSYNC		0x00000086
118 /* connected to COM Express connector, modes with field, clken signals */
119 #define MUX_MSK_VIN2_withFIELD		0x0000000F
120 #define MUX_VAL_VIN2_withFIELD		0x0000000E
121 /* connected to COM Express connector, modes with sync, field, clken signals */
122 #define MUX_MSK_VIN2_withSYNCandFIELD	0x000000AF
123 #define MUX_VAL_VIN2_withSYNCandFIELD	0x0000008E
124 /* connected to COM Express connector, BT656 only */
125 #define MUX_MSK_VIN3_BT656		0x00000101
126 #define MUX_VAL_VIN3_BT656		0x00000100
127 /* connected to COM Express connector, modes with field, clken signals */
128 #define MUX_MSK_VIN3_withFIELD		0x00000121
129 #define MUX_VAL_VIN3_withFIELD		0x00000120
130 /* connected to COM Express connector, modes with sync, field, clken signals */
131 #define MUX_MSK_VIN3_withSYNCandFIELD	0x00000161
132 #define MUX_VAL_VIN3_withSYNCandFIELD	0x00000120
133 /* connected to COM Express connector (RGMII) */
134 #define MUX_MSK_AVB			0x00000003
135 #define MUX_VAL_AVB			0x00000000
136 /* connected to on-board QSPI flash */
137 #define MUX_MSK_QSPI_ONBOARD		0x00000019
138 #define MUX_VAL_QSPI_ONBOARD		0x00000000
139 /* connected to COM Express connector */
140 #define MUX_MSK_QSPI_COMEXPRESS		0x00000019
141 #define MUX_VAL_QSPI_COMEXPRESS		0x00000010
142 /* connected to COM Express connector and PMIC */
143 #define MUX_MSK_I2C1			0x00000061
144 #define MUX_VAL_I2C1			0x00000060
145 /* connected to HDMI driver */
146 #define MUX_MSK_IRQ3			0x00000101
147 #define MUX_VAL_IRQ3			0x00000000
148 /* connected to USB/FTDI */
149 #define MUX_MSK_SCIFA0_USB		0x00004081
150 #define MUX_VAL_SCIFA0_USB		0x00004000
151 /* connected to COM Express connector */
152 #define MUX_MSK_SCIFA0_COMEXPRESS	0x00004081
153 #define MUX_VAL_SCIFA0_COMEXPRESS	0x00000000
154 /* connected to COM Express connector */
155 #define MUX_MSK_SCIFA2			0x00002001
156 #define MUX_VAL_SCIFA2			0x00000000
157 /* connected to on-board 10/100 Phy */
158 #define MUX_MSK_ETH_ONBOARD		0x00000600
159 #define MUX_VAL_ETH_ONBOARD		0x00000000
160 /* connected to COM Express connector (RMII) */
161 #define MUX_MSK_ETH_COMEXPRESS		0x00000600
162 #define MUX_VAL_ETH_COMEXPRESS		0x00000400
163 /* connected to on-board MicroSD slot */
164 #define MUX_MSK_SD0			0x00000801
165 #define MUX_VAL_SD0			0x00000000
166 /* connected to COM Express connector */
167 #define MUX_MSK_SD2			0x00001001
168 #define MUX_VAL_SD2			0x00001000
169 /* connected to COM Express connector */
170 #define MUX_MSK_PWM210			0x00002001
171 #define MUX_VAL_PWM210			0x00002000
172 
173 #define HDMI_MSK			0x07
174 #define HDMI_OFF			0x00
175 #define HDMI_ONBOARD			0x07
176 #define HDMI_COMEXPRESS			0x05
177 #define HDMI_ONBOARD_NODDC		0x03
178 #define HDMI_COMEXPRESS_NODDC		0x01
179 
180 void cpld_init(void);
181 
182 #endif	/* _CPLD_H_ */
183