1 /* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */ 2 3 /* Header file for Mellanox BlueField GigE register defines 4 * 5 * Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES 6 */ 7 8 #ifndef __MLXBF_GIGE_REGS_H__ 9 #define __MLXBF_GIGE_REGS_H__ 10 11 #include <linux/bitfield.h> 12 13 #define MLXBF_GIGE_VERSION 0x0000 14 #define MLXBF_GIGE_VERSION_BF2 0x0 15 #define MLXBF_GIGE_VERSION_BF3 0x1 16 #define MLXBF_GIGE_STATUS 0x0010 17 #define MLXBF_GIGE_STATUS_READY BIT(0) 18 #define MLXBF_GIGE_INT_STATUS 0x0028 19 #define MLXBF_GIGE_INT_STATUS_RX_RECEIVE_PACKET BIT(0) 20 #define MLXBF_GIGE_INT_STATUS_RX_MAC_ERROR BIT(1) 21 #define MLXBF_GIGE_INT_STATUS_RX_TRN_ERROR BIT(2) 22 #define MLXBF_GIGE_INT_STATUS_SW_ACCESS_ERROR BIT(3) 23 #define MLXBF_GIGE_INT_STATUS_SW_CONFIG_ERROR BIT(4) 24 #define MLXBF_GIGE_INT_STATUS_TX_PI_CI_EXCEED_WQ_SIZE BIT(5) 25 #define MLXBF_GIGE_INT_STATUS_TX_SMALL_FRAME_SIZE BIT(6) 26 #define MLXBF_GIGE_INT_STATUS_TX_CHECKSUM_INPUTS BIT(7) 27 #define MLXBF_GIGE_INT_STATUS_HW_ACCESS_ERROR BIT(8) 28 #define MLXBF_GIGE_INT_EN 0x0030 29 #define MLXBF_GIGE_INT_EN_RX_RECEIVE_PACKET BIT(0) 30 #define MLXBF_GIGE_INT_EN_RX_MAC_ERROR BIT(1) 31 #define MLXBF_GIGE_INT_EN_RX_TRN_ERROR BIT(2) 32 #define MLXBF_GIGE_INT_EN_SW_ACCESS_ERROR BIT(3) 33 #define MLXBF_GIGE_INT_EN_SW_CONFIG_ERROR BIT(4) 34 #define MLXBF_GIGE_INT_EN_TX_PI_CI_EXCEED_WQ_SIZE BIT(5) 35 #define MLXBF_GIGE_INT_EN_TX_SMALL_FRAME_SIZE BIT(6) 36 #define MLXBF_GIGE_INT_EN_TX_CHECKSUM_INPUTS BIT(7) 37 #define MLXBF_GIGE_INT_EN_HW_ACCESS_ERROR BIT(8) 38 #define MLXBF_GIGE_INT_MASK 0x0038 39 #define MLXBF_GIGE_INT_MASK_RX_RECEIVE_PACKET BIT(0) 40 #define MLXBF_GIGE_CONTROL 0x0040 41 #define MLXBF_GIGE_CONTROL_PORT_EN BIT(0) 42 #define MLXBF_GIGE_CONTROL_MAC_ID_RANGE_EN BIT(1) 43 #define MLXBF_GIGE_CONTROL_EN_SPECIFIC_MAC BIT(4) 44 #define MLXBF_GIGE_CONTROL_CLEAN_PORT_EN BIT(31) 45 #define MLXBF_GIGE_RX_WQ_BASE 0x0200 46 #define MLXBF_GIGE_RX_WQE_SIZE_LOG2 0x0208 47 #define MLXBF_GIGE_RX_WQE_SIZE_LOG2_RESET_VAL 7 48 #define MLXBF_GIGE_RX_CQ_BASE 0x0210 49 #define MLXBF_GIGE_TX_WQ_BASE 0x0218 50 #define MLXBF_GIGE_TX_WQ_SIZE_LOG2 0x0220 51 #define MLXBF_GIGE_TX_WQ_SIZE_LOG2_RESET_VAL 7 52 #define MLXBF_GIGE_TX_CI_UPDATE_ADDRESS 0x0228 53 #define MLXBF_GIGE_RX_WQE_PI 0x0230 54 #define MLXBF_GIGE_TX_PRODUCER_INDEX 0x0238 55 #define MLXBF_GIGE_RX_MAC_FILTER 0x0240 56 #define MLXBF_GIGE_RX_MAC_FILTER_STRIDE 0x0008 57 #define MLXBF_GIGE_RX_DIN_DROP_COUNTER 0x0260 58 #define MLXBF_GIGE_TX_CONSUMER_INDEX 0x0310 59 #define MLXBF_GIGE_TX_CONTROL 0x0318 60 #define MLXBF_GIGE_TX_CONTROL_GRACEFUL_STOP BIT(0) 61 #define MLXBF_GIGE_TX_STATUS 0x0388 62 #define MLXBF_GIGE_TX_STATUS_DATA_FIFO_FULL BIT(1) 63 #define MLXBF_GIGE_RX_MAC_FILTER_DMAC_RANGE_START 0x0520 64 #define MLXBF_GIGE_RX_MAC_FILTER_DMAC_RANGE_END 0x0528 65 #define MLXBF_GIGE_RX_MAC_FILTER_GENERAL 0x0530 66 #define MLXBF_GIGE_RX_MAC_FILTER_EN_MULTICAST BIT(1) 67 #define MLXBF_GIGE_RX_MAC_FILTER_COUNT_DISC 0x0540 68 #define MLXBF_GIGE_RX_MAC_FILTER_COUNT_DISC_EN BIT(0) 69 #define MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS 0x0548 70 #define MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS_EN BIT(0) 71 #define MLXBF_GIGE_RX_PASS_COUNTER_ALL 0x0550 72 #define MLXBF_GIGE_RX_DISC_COUNTER_ALL 0x0560 73 #define MLXBF_GIGE_RX 0x0578 74 #define MLXBF_GIGE_RX_STRIP_CRC_EN BIT(1) 75 #define MLXBF_GIGE_RX_DMA 0x0580 76 #define MLXBF_GIGE_RX_DMA_EN BIT(0) 77 #define MLXBF_GIGE_RX_CQE_PACKET_CI 0x05b0 78 #define MLXBF_GIGE_MAC_CFG 0x05e8 79 80 /* NOTE: MLXBF_GIGE_MAC_CFG is the last defined register offset, 81 * so use that plus size of single register to derive total size 82 */ 83 #define MLXBF_GIGE_MMIO_REG_SZ (MLXBF_GIGE_MAC_CFG + 8) 84 85 #define MLXBF_GIGE_PLU_TX_REG0 0x80 86 #define MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK GENMASK(11, 0) 87 #define MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK GENMASK(15, 14) 88 89 #define MLXBF_GIGE_PLU_RX_REG0 0x10 90 #define MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK GENMASK(25, 24) 91 92 #define MLXBF_GIGE_1G_SGMII_MODE 0x0 93 #define MLXBF_GIGE_10M_SGMII_MODE 0x1 94 #define MLXBF_GIGE_100M_SGMII_MODE 0x2 95 96 /* ipg_size default value for 1G is fixed by HW to 11 + End = 12. 97 * So for 100M it is 12 * 10 - 1 = 119 98 * For 10M, it is 12 * 100 - 1 = 1199 99 */ 100 #define MLXBF_GIGE_1G_IPG_SIZE 11 101 #define MLXBF_GIGE_100M_IPG_SIZE 119 102 #define MLXBF_GIGE_10M_IPG_SIZE 1199 103 104 #endif /* !defined(__MLXBF_GIGE_REGS_H__) */ 105