1 /*
2  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
3  * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
4  *
5  * This software is available to you under a choice of one of two
6  * licenses.  You may choose to be licensed under the terms of the GNU
7  * General Public License (GPL) Version 2, available from the file
8  * COPYING in the main directory of this source tree, or the
9  * OpenIB.org BSD license below:
10  *
11  *     Redistribution and use in source and binary forms, with or
12  *     without modification, are permitted provided that the following
13  *     conditions are met:
14  *
15  *      - Redistributions of source code must retain the above
16  *        copyright notice, this list of conditions and the following
17  *        disclaimer.
18  *
19  *      - Redistributions in binary form must reproduce the above
20  *        copyright notice, this list of conditions and the following
21  *        disclaimer in the documentation and/or other materials
22  *        provided with the distribution.
23  *
24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31  * SOFTWARE.
32  */
33 
34 #include <linux/errno.h>
35 #include <linux/pci.h>
36 #include <linux/delay.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 
40 #include "mlx4.h"
41 
mlx4_reset(struct mlx4_dev * dev)42 int mlx4_reset(struct mlx4_dev *dev)
43 {
44 	void __iomem *reset;
45 	u32 *hca_header = NULL;
46 	int pcie_cap;
47 	u16 devctl;
48 	u16 linkctl;
49 	u16 vendor;
50 	unsigned long end;
51 	u32 sem;
52 	int i;
53 	int err = 0;
54 
55 #define MLX4_RESET_BASE		0xf0000
56 #define MLX4_RESET_SIZE		  0x400
57 #define MLX4_SEM_OFFSET		  0x3fc
58 #define MLX4_RESET_OFFSET	   0x10
59 #define MLX4_RESET_VALUE	swab32(1)
60 
61 #define MLX4_SEM_TIMEOUT_JIFFIES	(10 * HZ)
62 #define MLX4_RESET_TIMEOUT_JIFFIES	(2 * HZ)
63 
64 	/*
65 	 * Reset the chip.  This is somewhat ugly because we have to
66 	 * save off the PCI header before reset and then restore it
67 	 * after the chip reboots.  We skip config space offsets 22
68 	 * and 23 since those have a special meaning.
69 	 */
70 
71 	/* Do we need to save off the full 4K PCI Express header?? */
72 	hca_header = kmalloc(256, GFP_KERNEL);
73 	if (!hca_header) {
74 		err = -ENOMEM;
75 		mlx4_err(dev, "Couldn't allocate memory to save HCA PCI header, aborting\n");
76 		goto out;
77 	}
78 
79 	pcie_cap = pci_pcie_cap(dev->persist->pdev);
80 
81 	for (i = 0; i < 64; ++i) {
82 		if (i == 22 || i == 23)
83 			continue;
84 		if (pci_read_config_dword(dev->persist->pdev, i * 4,
85 					  hca_header + i)) {
86 			err = -ENODEV;
87 			mlx4_err(dev, "Couldn't save HCA PCI header, aborting\n");
88 			goto out;
89 		}
90 	}
91 
92 	reset = ioremap(pci_resource_start(dev->persist->pdev, 0) +
93 			MLX4_RESET_BASE,
94 			MLX4_RESET_SIZE);
95 	if (!reset) {
96 		err = -ENOMEM;
97 		mlx4_err(dev, "Couldn't map HCA reset register, aborting\n");
98 		goto out;
99 	}
100 
101 	/* grab HW semaphore to lock out flash updates */
102 	end = jiffies + MLX4_SEM_TIMEOUT_JIFFIES;
103 	do {
104 		sem = readl(reset + MLX4_SEM_OFFSET);
105 		if (!sem)
106 			break;
107 
108 		msleep(1);
109 	} while (time_before(jiffies, end));
110 
111 	if (sem) {
112 		mlx4_err(dev, "Failed to obtain HW semaphore, aborting\n");
113 		err = -EAGAIN;
114 		iounmap(reset);
115 		goto out;
116 	}
117 
118 	/* actually hit reset */
119 	writel(MLX4_RESET_VALUE, reset + MLX4_RESET_OFFSET);
120 	iounmap(reset);
121 
122 	/* Docs say to wait one second before accessing device */
123 	msleep(1000);
124 
125 	end = jiffies + MLX4_RESET_TIMEOUT_JIFFIES;
126 	do {
127 		if (!pci_read_config_word(dev->persist->pdev, PCI_VENDOR_ID,
128 					  &vendor) && vendor != 0xffff)
129 			break;
130 
131 		msleep(1);
132 	} while (time_before(jiffies, end));
133 
134 	if (vendor == 0xffff) {
135 		err = -ENODEV;
136 		mlx4_err(dev, "PCI device did not come back after reset, aborting\n");
137 		goto out;
138 	}
139 
140 	/* Now restore the PCI headers */
141 	if (pcie_cap) {
142 		devctl = hca_header[(pcie_cap + PCI_EXP_DEVCTL) / 4];
143 		if (pcie_capability_write_word(dev->persist->pdev,
144 					       PCI_EXP_DEVCTL,
145 					       devctl)) {
146 			err = -ENODEV;
147 			mlx4_err(dev, "Couldn't restore HCA PCI Express Device Control register, aborting\n");
148 			goto out;
149 		}
150 		linkctl = hca_header[(pcie_cap + PCI_EXP_LNKCTL) / 4];
151 		if (pcie_capability_write_word(dev->persist->pdev,
152 					       PCI_EXP_LNKCTL,
153 					       linkctl)) {
154 			err = -ENODEV;
155 			mlx4_err(dev, "Couldn't restore HCA PCI Express Link control register, aborting\n");
156 			goto out;
157 		}
158 	}
159 
160 	for (i = 0; i < 16; ++i) {
161 		if (i * 4 == PCI_COMMAND)
162 			continue;
163 
164 		if (pci_write_config_dword(dev->persist->pdev, i * 4,
165 					   hca_header[i])) {
166 			err = -ENODEV;
167 			mlx4_err(dev, "Couldn't restore HCA reg %x, aborting\n",
168 				 i);
169 			goto out;
170 		}
171 	}
172 
173 	if (pci_write_config_dword(dev->persist->pdev, PCI_COMMAND,
174 				   hca_header[PCI_COMMAND / 4])) {
175 		err = -ENODEV;
176 		mlx4_err(dev, "Couldn't restore HCA COMMAND, aborting\n");
177 		goto out;
178 	}
179 
180 out:
181 	kfree(hca_header);
182 
183 	return err;
184 }
185