xref: /openbmc/u-boot/drivers/crypto/fsl/jr.h (revision e8f80a5a)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2008-2014 Freescale Semiconductor, Inc.
4  *
5  */
6 
7 #ifndef __JR_H
8 #define __JR_H
9 
10 #include <linux/compiler.h>
11 
12 #define JR_SIZE 4
13 /* Timeout currently defined as 90 sec */
14 #define CONFIG_SEC_DEQ_TIMEOUT	90000000U
15 
16 #define DEFAULT_JR_ID		0
17 #define DEFAULT_JR_LIODN	0
18 #define DEFAULT_IRQ		0	/* Interrupts not to be configured */
19 
20 #define MCFGR_SWRST       ((uint32_t)(1)<<31) /* Software Reset */
21 #define MCFGR_DMA_RST     ((uint32_t)(1)<<28) /* DMA Reset */
22 #define MCFGR_PS_SHIFT          16
23 #define MCFGR_AWCACHE_SHIFT	8
24 #define MCFGR_AWCACHE_MASK	(0xf << MCFGR_AWCACHE_SHIFT)
25 #define MCFGR_ARCACHE_SHIFT	12
26 #define MCFGR_ARCACHE_MASK	(0xf << MCFGR_ARCACHE_SHIFT)
27 
28 #define JR_INTMASK	  0x00000001
29 #define JRCR_RESET                  0x01
30 #define JRINT_ERR_HALT_INPROGRESS   0x4
31 #define JRINT_ERR_HALT_MASK         0xc
32 #define JRNSLIODN_SHIFT		16
33 #define JRNSLIODN_MASK		0x0fff0000
34 #define JRSLIODN_SHIFT		0
35 #define JRSLIODN_MASK		0x00000fff
36 #define JROWN_NS		0x00000008
37 #define JRMID_NS		0x00000001
38 
39 #define JQ_DEQ_ERR		-1
40 #define JQ_DEQ_TO_ERR		-2
41 #define JQ_ENQ_ERR		-3
42 
43 #define RNG4_MAX_HANDLES	2
44 
45 struct op_ring {
46 	phys_addr_t desc;
47 	uint32_t status;
48 } __packed;
49 
50 struct jr_info {
51 	void (*callback)(uint32_t status, void *arg);
52 	phys_addr_t desc_phys_addr;
53 	uint32_t desc_len;
54 	uint32_t op_done;
55 	void *arg;
56 };
57 
58 struct jobring {
59 	int jq_id;
60 	int irq;
61 	int liodn;
62 	/* Head is the index where software would enq the descriptor in
63 	 * the i/p ring
64 	 */
65 	int head;
66 	/* Tail index would be used by s/w ehile enqueuing to determine if
67 	 * there is any space left in the s/w maintained i/p rings
68 	 */
69 	/* Also in case of deq tail will be incremented only in case of
70 	 * in-order job completion
71 	 */
72 	int tail;
73 	/* Read index of the output ring. It may not match with tail in case
74 	 * of out of order completetion
75 	 */
76 	int read_idx;
77 	/* Write index to input ring. Would be always equal to head */
78 	int write_idx;
79 	/* Size of the rings. */
80 	int size;
81 	/* Op ring size aligned to cache line size */
82 	int op_size;
83 	/* The ip and output rings have to be accessed by SEC. So the
84 	 * pointers will ahve to point to the housekeeping region provided
85 	 * by SEC
86 	 */
87 	/*Circular  Ring of i/p descriptors */
88 	dma_addr_t *input_ring;
89 	/* Circular Ring of o/p descriptors */
90 	/* Circula Ring containing info regarding descriptors in i/p
91 	 * and o/p ring
92 	 */
93 	/* This ring can be on the stack */
94 	struct jr_info info[JR_SIZE];
95 	struct op_ring *output_ring;
96 	/* Offset in CCSR to the SEC engine to which this JR belongs */
97 	uint32_t sec_offset;
98 
99 };
100 
101 struct result {
102 	int done;
103 	uint32_t status;
104 };
105 
106 void caam_jr_strstatus(u32 status);
107 int run_descriptor_jr(uint32_t *desc);
108 
109 #endif
110