1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * ispccp2.c
4 *
5 * TI OMAP3 ISP - CCP2 module
6 *
7 * Copyright (C) 2010 Nokia Corporation
8 * Copyright (C) 2010 Texas Instruments, Inc.
9 *
10 * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
11 * Sakari Ailus <sakari.ailus@iki.fi>
12 */
13
14 #include <linux/delay.h>
15 #include <linux/device.h>
16 #include <linux/mm.h>
17 #include <linux/module.h>
18 #include <linux/mutex.h>
19 #include <linux/uaccess.h>
20 #include <linux/regulator/consumer.h>
21
22 #include "isp.h"
23 #include "ispreg.h"
24 #include "ispccp2.h"
25
26 /* Number of LCX channels */
27 #define CCP2_LCx_CHANS_NUM 3
28 /* Max/Min size for CCP2 video port */
29 #define ISPCCP2_DAT_START_MIN 0
30 #define ISPCCP2_DAT_START_MAX 4095
31 #define ISPCCP2_DAT_SIZE_MIN 0
32 #define ISPCCP2_DAT_SIZE_MAX 4095
33 #define ISPCCP2_VPCLK_FRACDIV 65536
34 #define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP 0x12
35 #define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP 0x16
36 /* Max/Min size for CCP2 memory channel */
37 #define ISPCCP2_LCM_HSIZE_COUNT_MIN 16
38 #define ISPCCP2_LCM_HSIZE_COUNT_MAX 8191
39 #define ISPCCP2_LCM_HSIZE_SKIP_MIN 0
40 #define ISPCCP2_LCM_HSIZE_SKIP_MAX 8191
41 #define ISPCCP2_LCM_VSIZE_MIN 1
42 #define ISPCCP2_LCM_VSIZE_MAX 8191
43 #define ISPCCP2_LCM_HWORDS_MIN 1
44 #define ISPCCP2_LCM_HWORDS_MAX 4095
45 #define ISPCCP2_LCM_CTRL_BURST_SIZE_32X 5
46 #define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL 0
47 #define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 2
48 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 2
49 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 3
50 #define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 3
51 #define ISPCCP2_LCM_CTRL_DST_PORT_VP 0
52 #define ISPCCP2_LCM_CTRL_DST_PORT_MEM 1
53
54 /* Set only the required bits */
55 #define BIT_SET(var, shift, mask, val) \
56 do { \
57 var = ((var) & ~((mask) << (shift))) \
58 | ((val) << (shift)); \
59 } while (0)
60
61 /*
62 * ccp2_print_status - Print current CCP2 module register values.
63 */
64 #define CCP2_PRINT_REGISTER(isp, name)\
65 dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
66 isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))
67
ccp2_print_status(struct isp_ccp2_device * ccp2)68 static void ccp2_print_status(struct isp_ccp2_device *ccp2)
69 {
70 struct isp_device *isp = to_isp_device(ccp2);
71
72 dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");
73
74 CCP2_PRINT_REGISTER(isp, SYSCONFIG);
75 CCP2_PRINT_REGISTER(isp, SYSSTATUS);
76 CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
77 CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
78 CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
79 CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
80 CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
81 CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
82 CCP2_PRINT_REGISTER(isp, CTRL);
83 CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
84 CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
85 CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
86 CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
87 CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
88 CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
89 CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
90 CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
91 CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
92 CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
93 CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
94 CCP2_PRINT_REGISTER(isp, LCM_CTRL);
95 CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
96 CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
97 CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
98 CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
99 CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
100 CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
101 CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);
102
103 dev_dbg(isp->dev, "--------------------------------------------\n");
104 }
105
106 /*
107 * ccp2_reset - Reset the CCP2
108 * @ccp2: pointer to ISP CCP2 device
109 */
ccp2_reset(struct isp_ccp2_device * ccp2)110 static void ccp2_reset(struct isp_ccp2_device *ccp2)
111 {
112 struct isp_device *isp = to_isp_device(ccp2);
113 int i = 0;
114
115 /* Reset the CSI1/CCP2B and wait for reset to complete */
116 isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
117 ISPCCP2_SYSCONFIG_SOFT_RESET);
118 while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
119 ISPCCP2_SYSSTATUS_RESET_DONE)) {
120 udelay(10);
121 if (i++ > 10) { /* try read 10 times */
122 dev_warn(isp->dev,
123 "omap3_isp: timeout waiting for ccp2 reset\n");
124 break;
125 }
126 }
127 }
128
129 /*
130 * ccp2_pwr_cfg - Configure the power mode settings
131 * @ccp2: pointer to ISP CCP2 device
132 */
ccp2_pwr_cfg(struct isp_ccp2_device * ccp2)133 static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
134 {
135 struct isp_device *isp = to_isp_device(ccp2);
136
137 isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
138 ((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
139 ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
140 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
141 }
142
143 /*
144 * ccp2_if_enable - Enable CCP2 interface.
145 * @ccp2: pointer to ISP CCP2 device
146 * @enable: enable/disable flag
147 */
ccp2_if_enable(struct isp_ccp2_device * ccp2,u8 enable)148 static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
149 {
150 struct isp_device *isp = to_isp_device(ccp2);
151 int ret;
152 int i;
153
154 if (enable && ccp2->vdds_csib) {
155 ret = regulator_enable(ccp2->vdds_csib);
156 if (ret < 0)
157 return ret;
158 }
159
160 /* Enable/Disable all the LCx channels */
161 for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
162 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
163 ISPCCP2_LCx_CTRL_CHAN_EN,
164 enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);
165
166 /* Enable/Disable ccp2 interface in ccp2 mode */
167 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
168 ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
169 enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
170
171 if (!enable && ccp2->vdds_csib)
172 regulator_disable(ccp2->vdds_csib);
173
174 return 0;
175 }
176
177 /*
178 * ccp2_mem_enable - Enable CCP2 memory interface.
179 * @ccp2: pointer to ISP CCP2 device
180 * @enable: enable/disable flag
181 */
ccp2_mem_enable(struct isp_ccp2_device * ccp2,u8 enable)182 static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
183 {
184 struct isp_device *isp = to_isp_device(ccp2);
185
186 if (enable)
187 ccp2_if_enable(ccp2, 0);
188
189 /* Enable/Disable ccp2 interface in ccp2 mode */
190 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
191 ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);
192
193 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
194 ISPCCP2_LCM_CTRL_CHAN_EN,
195 enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
196 }
197
198 /*
199 * ccp2_phyif_config - Initialize CCP2 phy interface config
200 * @ccp2: Pointer to ISP CCP2 device
201 * @buscfg: CCP2 platform data
202 *
203 * Configure the CCP2 physical interface module from platform data.
204 *
205 * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
206 */
ccp2_phyif_config(struct isp_ccp2_device * ccp2,const struct isp_ccp2_cfg * buscfg)207 static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
208 const struct isp_ccp2_cfg *buscfg)
209 {
210 struct isp_device *isp = to_isp_device(ccp2);
211 u32 val;
212
213 val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
214 ISPCCP2_CTRL_MODE;
215 /* Data/strobe physical layer */
216 BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
217 buscfg->phy_layer);
218 BIT_SET(val, ISPCCP2_CTRL_IO_OUT_SEL_SHIFT,
219 ISPCCP2_CTRL_IO_OUT_SEL_MASK, buscfg->ccp2_mode);
220 BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
221 buscfg->strobe_clk_pol);
222 BIT_SET(val, ISPCCP2_CTRL_VP_CLK_POL_SHIFT,
223 ISPCCP2_CTRL_VP_CLK_POL_MASK, buscfg->vp_clk_pol);
224 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
225
226 val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
227 if (!(val & ISPCCP2_CTRL_MODE)) {
228 if (buscfg->ccp2_mode == ISP_CCP2_MODE_CCP2)
229 dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
230 if (buscfg->phy_layer == ISP_CCP2_PHY_DATA_STROBE)
231 /* Strobe mode requires CCP2 */
232 return -EIO;
233 }
234
235 return 0;
236 }
237
238 /*
239 * ccp2_vp_config - Initialize CCP2 video port interface.
240 * @ccp2: Pointer to ISP CCP2 device
241 * @vpclk_div: Video port divisor
242 *
243 * Configure the CCP2 video port with the given clock divisor. The valid divisor
244 * values depend on the ISP revision:
245 *
246 * - revision 1.0 and 2.0 1 to 4
247 * - revision 15.0 1 to 65536
248 *
249 * The exact divisor value used might differ from the requested value, as ISP
250 * revision 15.0 represent the divisor by 65536 divided by an integer.
251 */
ccp2_vp_config(struct isp_ccp2_device * ccp2,unsigned int vpclk_div)252 static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
253 unsigned int vpclk_div)
254 {
255 struct isp_device *isp = to_isp_device(ccp2);
256 u32 val;
257
258 /* ISPCCP2_CTRL Video port */
259 val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
260 val |= ISPCCP2_CTRL_VP_ONLY_EN; /* Disable the memory write port */
261
262 if (isp->revision == ISP_REVISION_15_0) {
263 vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
264 vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
265 BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
266 ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
267 } else {
268 vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
269 BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
270 ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
271 }
272
273 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
274 }
275
276 /*
277 * ccp2_lcx_config - Initialize CCP2 logical channel interface.
278 * @ccp2: Pointer to ISP CCP2 device
279 * @config: Pointer to ISP LCx config structure.
280 *
281 * This will analyze the parameters passed by the interface config
282 * and configure CSI1/CCP2 logical channel
283 *
284 */
ccp2_lcx_config(struct isp_ccp2_device * ccp2,struct isp_interface_lcx_config * config)285 static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
286 struct isp_interface_lcx_config *config)
287 {
288 struct isp_device *isp = to_isp_device(ccp2);
289 u32 val, format;
290
291 switch (config->format) {
292 case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
293 format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
294 break;
295 case MEDIA_BUS_FMT_SGRBG10_1X10:
296 default:
297 format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP; /* RAW10+VP */
298 break;
299 }
300 /* ISPCCP2_LCx_CTRL logical channel #0 */
301 val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
302 | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */
303
304 if (isp->revision == ISP_REVISION_15_0) {
305 /* CRC */
306 BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
307 ISPCCP2_LCx_CTRL_CRC_MASK,
308 config->crc);
309 /* Format = RAW10+VP or RAW8+DPCM10+VP*/
310 BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
311 ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
312 } else {
313 BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
314 ISPCCP2_LCx_CTRL_CRC_MASK,
315 config->crc);
316
317 BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
318 ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
319 }
320 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));
321
322 /* ISPCCP2_DAT_START for logical channel #0 */
323 isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
324 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));
325
326 /* ISPCCP2_DAT_SIZE for logical channel #0 */
327 isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
328 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));
329
330 /* Enable error IRQs for logical channel #0 */
331 val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
332 ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
333 ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
334 ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
335 ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
336 ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
337
338 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
339 isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
340 }
341
342 /*
343 * ccp2_if_configure - Configure ccp2 with data from sensor
344 * @ccp2: Pointer to ISP CCP2 device
345 *
346 * Return 0 on success or a negative error code
347 */
ccp2_if_configure(struct isp_ccp2_device * ccp2)348 static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
349 {
350 struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
351 const struct isp_bus_cfg *buscfg;
352 struct v4l2_mbus_framefmt *format;
353 struct media_pad *pad;
354 struct v4l2_subdev *sensor;
355 u32 lines = 0;
356 int ret;
357
358 ccp2_pwr_cfg(ccp2);
359
360 pad = media_pad_remote_pad_first(&ccp2->pads[CCP2_PAD_SINK]);
361 sensor = media_entity_to_v4l2_subdev(pad->entity);
362 buscfg = v4l2_subdev_to_bus_cfg(pipe->external);
363 if (WARN_ON(!buscfg))
364 return -EPIPE;
365
366 ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
367 if (ret < 0)
368 return ret;
369
370 ccp2_vp_config(ccp2, buscfg->bus.ccp2.vpclk_div + 1);
371
372 v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);
373
374 format = &ccp2->formats[CCP2_PAD_SINK];
375
376 ccp2->if_cfg.data_start = lines;
377 ccp2->if_cfg.crc = buscfg->bus.ccp2.crc;
378 ccp2->if_cfg.format = format->code;
379 ccp2->if_cfg.data_size = format->height;
380
381 ccp2_lcx_config(ccp2, &ccp2->if_cfg);
382
383 return 0;
384 }
385
ccp2_adjust_bandwidth(struct isp_ccp2_device * ccp2)386 static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
387 {
388 struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
389 struct isp_device *isp = to_isp_device(ccp2);
390 const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
391 unsigned long l3_ick = pipe->l3_ick;
392 struct v4l2_fract *timeperframe;
393 unsigned int vpclk_div = 2;
394 unsigned int value;
395 u64 bound;
396 u64 area;
397
398 /* Compute the minimum clock divisor, based on the pipeline maximum
399 * data rate. This is an absolute lower bound if we don't want SBL
400 * overflows, so round the value up.
401 */
402 vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
403 vpclk_div);
404
405 /* Compute the maximum clock divisor, based on the requested frame rate.
406 * This is a soft lower bound to achieve a frame rate equal or higher
407 * than the requested value, so round the value down.
408 */
409 timeperframe = &pipe->max_timeperframe;
410
411 if (timeperframe->numerator) {
412 area = ofmt->width * ofmt->height;
413 bound = div_u64(area * timeperframe->denominator,
414 timeperframe->numerator);
415 value = min_t(u64, bound, l3_ick);
416 vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
417 }
418
419 dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
420 vpclk_div);
421
422 return vpclk_div;
423 }
424
425 /*
426 * ccp2_mem_configure - Initialize CCP2 memory input/output interface
427 * @ccp2: Pointer to ISP CCP2 device
428 * @config: Pointer to ISP mem interface config structure
429 *
430 * This will analyze the parameters passed by the interface config
431 * structure, and configure the respective registers for proper
432 * CSI1/CCP2 memory input.
433 */
ccp2_mem_configure(struct isp_ccp2_device * ccp2,struct isp_interface_mem_config * config)434 static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
435 struct isp_interface_mem_config *config)
436 {
437 struct isp_device *isp = to_isp_device(ccp2);
438 u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
439 u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
440 unsigned int dpcm_decompress = 0;
441 u32 val, hwords;
442
443 if (sink_pixcode != source_pixcode &&
444 sink_pixcode == MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
445 dpcm_decompress = 1;
446
447 ccp2_pwr_cfg(ccp2);
448
449 /* Hsize, Skip */
450 isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
451 (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
452 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);
453
454 /* Vsize, no. of lines */
455 isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
456 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);
457
458 if (ccp2->video_in.bpl_padding == 0)
459 config->src_ofst = 0;
460 else
461 config->src_ofst = ccp2->video_in.bpl_value;
462
463 isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
464 ISPCCP2_LCM_SRC_OFST);
465
466 /* Source and Destination formats */
467 val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
468 ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;
469
470 if (dpcm_decompress) {
471 /* source format is RAW8 */
472 val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
473 ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
474
475 /* RAW8 + DPCM10 - simple predictor */
476 val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;
477
478 /* enable source DPCM decompression */
479 val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
480 ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
481 } else {
482 /* source format is RAW10 */
483 val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
484 ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
485 }
486
487 /* Burst size to 32x64 */
488 val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
489 ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;
490
491 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);
492
493 /* Prefetch setup */
494 if (dpcm_decompress)
495 hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
496 config->hsize_count) >> 3;
497 else
498 hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
499 config->hsize_count) >> 2;
500
501 isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
502 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);
503
504 /* Video port */
505 isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
506 ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
507 ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));
508
509 /* Clear LCM interrupts */
510 isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
511 ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
512 OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
513
514 /* Enable LCM interrupts */
515 isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
516 ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
517 ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
518 }
519
520 /*
521 * ccp2_set_inaddr - Sets memory address of input frame.
522 * @ccp2: Pointer to ISP CCP2 device
523 * @addr: 32bit memory address aligned on 32byte boundary.
524 *
525 * Configures the memory address from which the input frame is to be read.
526 */
ccp2_set_inaddr(struct isp_ccp2_device * ccp2,u32 addr)527 static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
528 {
529 struct isp_device *isp = to_isp_device(ccp2);
530
531 isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
532 }
533
534 /* -----------------------------------------------------------------------------
535 * Interrupt handling
536 */
537
ccp2_isr_buffer(struct isp_ccp2_device * ccp2)538 static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
539 {
540 struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
541 struct isp_buffer *buffer;
542
543 buffer = omap3isp_video_buffer_next(&ccp2->video_in);
544 if (buffer != NULL)
545 ccp2_set_inaddr(ccp2, buffer->dma);
546
547 pipe->state |= ISP_PIPELINE_IDLE_INPUT;
548
549 if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
550 if (isp_pipeline_ready(pipe))
551 omap3isp_pipeline_set_stream(pipe,
552 ISP_PIPELINE_STREAM_SINGLESHOT);
553 }
554 }
555
556 /*
557 * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
558 * @ccp2: Pointer to ISP CCP2 device
559 *
560 * This will handle the CCP2 interrupts
561 */
omap3isp_ccp2_isr(struct isp_ccp2_device * ccp2)562 void omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
563 {
564 struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
565 struct isp_device *isp = to_isp_device(ccp2);
566 static const u32 ISPCCP2_LC01_ERROR =
567 ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
568 ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
569 ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
570 ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
571 ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
572 ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
573 u32 lcx_irqstatus, lcm_irqstatus;
574
575 /* First clear the interrupts */
576 lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
577 ISPCCP2_LC01_IRQSTATUS);
578 isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
579 ISPCCP2_LC01_IRQSTATUS);
580
581 lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
582 ISPCCP2_LCM_IRQSTATUS);
583 isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
584 ISPCCP2_LCM_IRQSTATUS);
585 /* Errors */
586 if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
587 pipe->error = true;
588 dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
589 return;
590 }
591
592 if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
593 pipe->error = true;
594 dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
595 }
596
597 if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
598 return;
599
600 /* Handle queued buffers on frame end interrupts */
601 if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
602 ccp2_isr_buffer(ccp2);
603 }
604
605 /* -----------------------------------------------------------------------------
606 * V4L2 subdev operations
607 */
608
609 static const unsigned int ccp2_fmts[] = {
610 MEDIA_BUS_FMT_SGRBG10_1X10,
611 MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
612 };
613
614 /*
615 * __ccp2_get_format - helper function for getting ccp2 format
616 * @ccp2 : Pointer to ISP CCP2 device
617 * @cfg: V4L2 subdev pad configuration
618 * @pad : pad number
619 * @which : wanted subdev format
620 * return format structure or NULL on error
621 */
622 static struct v4l2_mbus_framefmt *
__ccp2_get_format(struct isp_ccp2_device * ccp2,struct v4l2_subdev_state * sd_state,unsigned int pad,enum v4l2_subdev_format_whence which)623 __ccp2_get_format(struct isp_ccp2_device *ccp2,
624 struct v4l2_subdev_state *sd_state,
625 unsigned int pad, enum v4l2_subdev_format_whence which)
626 {
627 if (which == V4L2_SUBDEV_FORMAT_TRY)
628 return v4l2_subdev_get_try_format(&ccp2->subdev, sd_state,
629 pad);
630 else
631 return &ccp2->formats[pad];
632 }
633
634 /*
635 * ccp2_try_format - Handle try format by pad subdev method
636 * @ccp2 : Pointer to ISP CCP2 device
637 * @cfg: V4L2 subdev pad configuration
638 * @pad : pad num
639 * @fmt : pointer to v4l2 mbus format structure
640 * @which : wanted subdev format
641 */
ccp2_try_format(struct isp_ccp2_device * ccp2,struct v4l2_subdev_state * sd_state,unsigned int pad,struct v4l2_mbus_framefmt * fmt,enum v4l2_subdev_format_whence which)642 static void ccp2_try_format(struct isp_ccp2_device *ccp2,
643 struct v4l2_subdev_state *sd_state,
644 unsigned int pad,
645 struct v4l2_mbus_framefmt *fmt,
646 enum v4l2_subdev_format_whence which)
647 {
648 struct v4l2_mbus_framefmt *format;
649
650 switch (pad) {
651 case CCP2_PAD_SINK:
652 if (fmt->code != MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
653 fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
654
655 if (ccp2->input == CCP2_INPUT_SENSOR) {
656 fmt->width = clamp_t(u32, fmt->width,
657 ISPCCP2_DAT_START_MIN,
658 ISPCCP2_DAT_START_MAX);
659 fmt->height = clamp_t(u32, fmt->height,
660 ISPCCP2_DAT_SIZE_MIN,
661 ISPCCP2_DAT_SIZE_MAX);
662 } else if (ccp2->input == CCP2_INPUT_MEMORY) {
663 fmt->width = clamp_t(u32, fmt->width,
664 ISPCCP2_LCM_HSIZE_COUNT_MIN,
665 ISPCCP2_LCM_HSIZE_COUNT_MAX);
666 fmt->height = clamp_t(u32, fmt->height,
667 ISPCCP2_LCM_VSIZE_MIN,
668 ISPCCP2_LCM_VSIZE_MAX);
669 }
670 break;
671
672 case CCP2_PAD_SOURCE:
673 /* Source format - copy sink format and change pixel code
674 * to SGRBG10_1X10 as we don't support CCP2 write to memory.
675 * When CCP2 write to memory feature will be added this
676 * should be changed properly.
677 */
678 format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SINK,
679 which);
680 memcpy(fmt, format, sizeof(*fmt));
681 fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
682 break;
683 }
684
685 fmt->field = V4L2_FIELD_NONE;
686 fmt->colorspace = V4L2_COLORSPACE_SRGB;
687 }
688
689 /*
690 * ccp2_enum_mbus_code - Handle pixel format enumeration
691 * @sd : pointer to v4l2 subdev structure
692 * @cfg: V4L2 subdev pad configuration
693 * @code : pointer to v4l2_subdev_mbus_code_enum structure
694 * return -EINVAL or zero on success
695 */
ccp2_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)696 static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
697 struct v4l2_subdev_state *sd_state,
698 struct v4l2_subdev_mbus_code_enum *code)
699 {
700 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
701 struct v4l2_mbus_framefmt *format;
702
703 if (code->pad == CCP2_PAD_SINK) {
704 if (code->index >= ARRAY_SIZE(ccp2_fmts))
705 return -EINVAL;
706
707 code->code = ccp2_fmts[code->index];
708 } else {
709 if (code->index != 0)
710 return -EINVAL;
711
712 format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SINK,
713 code->which);
714 code->code = format->code;
715 }
716
717 return 0;
718 }
719
ccp2_enum_frame_size(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)720 static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
721 struct v4l2_subdev_state *sd_state,
722 struct v4l2_subdev_frame_size_enum *fse)
723 {
724 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
725 struct v4l2_mbus_framefmt format;
726
727 if (fse->index != 0)
728 return -EINVAL;
729
730 format.code = fse->code;
731 format.width = 1;
732 format.height = 1;
733 ccp2_try_format(ccp2, sd_state, fse->pad, &format, fse->which);
734 fse->min_width = format.width;
735 fse->min_height = format.height;
736
737 if (format.code != fse->code)
738 return -EINVAL;
739
740 format.code = fse->code;
741 format.width = -1;
742 format.height = -1;
743 ccp2_try_format(ccp2, sd_state, fse->pad, &format, fse->which);
744 fse->max_width = format.width;
745 fse->max_height = format.height;
746
747 return 0;
748 }
749
750 /*
751 * ccp2_get_format - Handle get format by pads subdev method
752 * @sd : pointer to v4l2 subdev structure
753 * @cfg: V4L2 subdev pad configuration
754 * @fmt : pointer to v4l2 subdev format structure
755 * return -EINVAL or zero on success
756 */
ccp2_get_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)757 static int ccp2_get_format(struct v4l2_subdev *sd,
758 struct v4l2_subdev_state *sd_state,
759 struct v4l2_subdev_format *fmt)
760 {
761 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
762 struct v4l2_mbus_framefmt *format;
763
764 format = __ccp2_get_format(ccp2, sd_state, fmt->pad, fmt->which);
765 if (format == NULL)
766 return -EINVAL;
767
768 fmt->format = *format;
769 return 0;
770 }
771
772 /*
773 * ccp2_set_format - Handle set format by pads subdev method
774 * @sd : pointer to v4l2 subdev structure
775 * @cfg: V4L2 subdev pad configuration
776 * @fmt : pointer to v4l2 subdev format structure
777 * returns zero
778 */
ccp2_set_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)779 static int ccp2_set_format(struct v4l2_subdev *sd,
780 struct v4l2_subdev_state *sd_state,
781 struct v4l2_subdev_format *fmt)
782 {
783 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
784 struct v4l2_mbus_framefmt *format;
785
786 format = __ccp2_get_format(ccp2, sd_state, fmt->pad, fmt->which);
787 if (format == NULL)
788 return -EINVAL;
789
790 ccp2_try_format(ccp2, sd_state, fmt->pad, &fmt->format, fmt->which);
791 *format = fmt->format;
792
793 /* Propagate the format from sink to source */
794 if (fmt->pad == CCP2_PAD_SINK) {
795 format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SOURCE,
796 fmt->which);
797 *format = fmt->format;
798 ccp2_try_format(ccp2, sd_state, CCP2_PAD_SOURCE, format,
799 fmt->which);
800 }
801
802 return 0;
803 }
804
805 /*
806 * ccp2_init_formats - Initialize formats on all pads
807 * @sd: ISP CCP2 V4L2 subdevice
808 * @fh: V4L2 subdev file handle
809 *
810 * Initialize all pad formats with default values. If fh is not NULL, try
811 * formats are initialized on the file handle. Otherwise active formats are
812 * initialized on the device.
813 */
ccp2_init_formats(struct v4l2_subdev * sd,struct v4l2_subdev_fh * fh)814 static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
815 {
816 struct v4l2_subdev_format format;
817
818 memset(&format, 0, sizeof(format));
819 format.pad = CCP2_PAD_SINK;
820 format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
821 format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
822 format.format.width = 4096;
823 format.format.height = 4096;
824 ccp2_set_format(sd, fh ? fh->state : NULL, &format);
825
826 return 0;
827 }
828
829 /*
830 * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
831 * @sd : pointer to v4l2 subdev structure
832 * @enable: 1 == Enable, 0 == Disable
833 * return zero
834 */
ccp2_s_stream(struct v4l2_subdev * sd,int enable)835 static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
836 {
837 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
838 struct isp_device *isp = to_isp_device(ccp2);
839 struct device *dev = to_device(ccp2);
840 int ret;
841
842 if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
843 if (enable == ISP_PIPELINE_STREAM_STOPPED)
844 return 0;
845 atomic_set(&ccp2->stopping, 0);
846 }
847
848 switch (enable) {
849 case ISP_PIPELINE_STREAM_CONTINUOUS:
850 if (ccp2->phy) {
851 ret = omap3isp_csiphy_acquire(ccp2->phy, &sd->entity);
852 if (ret < 0)
853 return ret;
854 }
855
856 ccp2_if_configure(ccp2);
857 ccp2_print_status(ccp2);
858
859 /* Enable CSI1/CCP2 interface */
860 ret = ccp2_if_enable(ccp2, 1);
861 if (ret < 0) {
862 if (ccp2->phy)
863 omap3isp_csiphy_release(ccp2->phy);
864 return ret;
865 }
866 break;
867
868 case ISP_PIPELINE_STREAM_SINGLESHOT:
869 if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
870 struct v4l2_mbus_framefmt *format;
871
872 format = &ccp2->formats[CCP2_PAD_SINK];
873
874 ccp2->mem_cfg.hsize_count = format->width;
875 ccp2->mem_cfg.vsize_count = format->height;
876 ccp2->mem_cfg.src_ofst = 0;
877
878 ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
879 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
880 ccp2_print_status(ccp2);
881 }
882 ccp2_mem_enable(ccp2, 1);
883 break;
884
885 case ISP_PIPELINE_STREAM_STOPPED:
886 if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
887 &ccp2->stopping))
888 dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
889 if (ccp2->input == CCP2_INPUT_MEMORY) {
890 ccp2_mem_enable(ccp2, 0);
891 omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
892 } else if (ccp2->input == CCP2_INPUT_SENSOR) {
893 /* Disable CSI1/CCP2 interface */
894 ccp2_if_enable(ccp2, 0);
895 if (ccp2->phy)
896 omap3isp_csiphy_release(ccp2->phy);
897 }
898 break;
899 }
900
901 ccp2->state = enable;
902 return 0;
903 }
904
905 /* subdev video operations */
906 static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
907 .s_stream = ccp2_s_stream,
908 };
909
910 /* subdev pad operations */
911 static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
912 .enum_mbus_code = ccp2_enum_mbus_code,
913 .enum_frame_size = ccp2_enum_frame_size,
914 .get_fmt = ccp2_get_format,
915 .set_fmt = ccp2_set_format,
916 };
917
918 /* subdev operations */
919 static const struct v4l2_subdev_ops ccp2_sd_ops = {
920 .video = &ccp2_sd_video_ops,
921 .pad = &ccp2_sd_pad_ops,
922 };
923
924 /* subdev internal operations */
925 static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = {
926 .open = ccp2_init_formats,
927 };
928
929 /* --------------------------------------------------------------------------
930 * ISP ccp2 video device node
931 */
932
933 /*
934 * ccp2_video_queue - Queue video buffer.
935 * @video : Pointer to isp video structure
936 * @buffer: Pointer to isp_buffer structure
937 * return -EIO or zero on success
938 */
ccp2_video_queue(struct isp_video * video,struct isp_buffer * buffer)939 static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
940 {
941 struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;
942
943 ccp2_set_inaddr(ccp2, buffer->dma);
944 return 0;
945 }
946
947 static const struct isp_video_operations ccp2_video_ops = {
948 .queue = ccp2_video_queue,
949 };
950
951 /* -----------------------------------------------------------------------------
952 * Media entity operations
953 */
954
955 /*
956 * ccp2_link_setup - Setup ccp2 connections.
957 * @entity : Pointer to media entity structure
958 * @local : Pointer to local pad array
959 * @remote : Pointer to remote pad array
960 * @flags : Link flags
961 * return -EINVAL on error or zero on success
962 */
ccp2_link_setup(struct media_entity * entity,const struct media_pad * local,const struct media_pad * remote,u32 flags)963 static int ccp2_link_setup(struct media_entity *entity,
964 const struct media_pad *local,
965 const struct media_pad *remote, u32 flags)
966 {
967 struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
968 struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
969 unsigned int index = local->index;
970
971 /* FIXME: this is actually a hack! */
972 if (is_media_entity_v4l2_subdev(remote->entity))
973 index |= 2 << 16;
974
975 switch (index) {
976 case CCP2_PAD_SINK:
977 /* read from memory */
978 if (flags & MEDIA_LNK_FL_ENABLED) {
979 if (ccp2->input == CCP2_INPUT_SENSOR)
980 return -EBUSY;
981 ccp2->input = CCP2_INPUT_MEMORY;
982 } else {
983 if (ccp2->input == CCP2_INPUT_MEMORY)
984 ccp2->input = CCP2_INPUT_NONE;
985 }
986 break;
987
988 case CCP2_PAD_SINK | 2 << 16:
989 /* read from sensor/phy */
990 if (flags & MEDIA_LNK_FL_ENABLED) {
991 if (ccp2->input == CCP2_INPUT_MEMORY)
992 return -EBUSY;
993 ccp2->input = CCP2_INPUT_SENSOR;
994 } else {
995 if (ccp2->input == CCP2_INPUT_SENSOR)
996 ccp2->input = CCP2_INPUT_NONE;
997 } break;
998
999 case CCP2_PAD_SOURCE | 2 << 16:
1000 /* write to video port/ccdc */
1001 if (flags & MEDIA_LNK_FL_ENABLED)
1002 ccp2->output = CCP2_OUTPUT_CCDC;
1003 else
1004 ccp2->output = CCP2_OUTPUT_NONE;
1005 break;
1006
1007 default:
1008 return -EINVAL;
1009 }
1010
1011 return 0;
1012 }
1013
1014 /* media operations */
1015 static const struct media_entity_operations ccp2_media_ops = {
1016 .link_setup = ccp2_link_setup,
1017 .link_validate = v4l2_subdev_link_validate,
1018 };
1019
1020 /*
1021 * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
1022 * @ccp2: Pointer to ISP CCP2 device
1023 */
omap3isp_ccp2_unregister_entities(struct isp_ccp2_device * ccp2)1024 void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
1025 {
1026 v4l2_device_unregister_subdev(&ccp2->subdev);
1027 omap3isp_video_unregister(&ccp2->video_in);
1028 }
1029
1030 /*
1031 * omap3isp_ccp2_register_entities - Register the subdev media entity
1032 * @ccp2: Pointer to ISP CCP2 device
1033 * @vdev: Pointer to v4l device
1034 * return negative error code or zero on success
1035 */
1036
omap3isp_ccp2_register_entities(struct isp_ccp2_device * ccp2,struct v4l2_device * vdev)1037 int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
1038 struct v4l2_device *vdev)
1039 {
1040 int ret;
1041
1042 /* Register the subdev and video nodes. */
1043 ccp2->subdev.dev = vdev->mdev->dev;
1044 ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
1045 if (ret < 0)
1046 goto error;
1047
1048 ret = omap3isp_video_register(&ccp2->video_in, vdev);
1049 if (ret < 0)
1050 goto error;
1051
1052 return 0;
1053
1054 error:
1055 omap3isp_ccp2_unregister_entities(ccp2);
1056 return ret;
1057 }
1058
1059 /* -----------------------------------------------------------------------------
1060 * ISP ccp2 initialisation and cleanup
1061 */
1062
1063 /*
1064 * ccp2_init_entities - Initialize ccp2 subdev and media entity.
1065 * @ccp2: Pointer to ISP CCP2 device
1066 * return negative error code or zero on success
1067 */
ccp2_init_entities(struct isp_ccp2_device * ccp2)1068 static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
1069 {
1070 struct v4l2_subdev *sd = &ccp2->subdev;
1071 struct media_pad *pads = ccp2->pads;
1072 struct media_entity *me = &sd->entity;
1073 int ret;
1074
1075 ccp2->input = CCP2_INPUT_NONE;
1076 ccp2->output = CCP2_OUTPUT_NONE;
1077
1078 v4l2_subdev_init(sd, &ccp2_sd_ops);
1079 sd->internal_ops = &ccp2_sd_internal_ops;
1080 strscpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
1081 sd->grp_id = 1 << 16; /* group ID for isp subdevs */
1082 v4l2_set_subdevdata(sd, ccp2);
1083 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1084
1085 pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
1086 | MEDIA_PAD_FL_MUST_CONNECT;
1087 pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
1088
1089 me->ops = &ccp2_media_ops;
1090 ret = media_entity_pads_init(me, CCP2_PADS_NUM, pads);
1091 if (ret < 0)
1092 return ret;
1093
1094 ccp2_init_formats(sd, NULL);
1095
1096 /*
1097 * The CCP2 has weird line alignment requirements, possibly caused by
1098 * DPCM8 decompression. Line length for data read from memory must be a
1099 * multiple of 128 bits (16 bytes) in continuous mode (when no padding
1100 * is present at end of lines). Additionally, if padding is used, the
1101 * padded line length must be a multiple of 32 bytes. To simplify the
1102 * implementation we use a fixed 32 bytes alignment regardless of the
1103 * input format and width. If strict 128 bits alignment support is
1104 * required ispvideo will need to be made aware of this special dual
1105 * alignment requirements.
1106 */
1107 ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
1108 ccp2->video_in.bpl_alignment = 32;
1109 ccp2->video_in.bpl_max = 0xffffffe0;
1110 ccp2->video_in.isp = to_isp_device(ccp2);
1111 ccp2->video_in.ops = &ccp2_video_ops;
1112 ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
1113
1114 ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
1115 if (ret < 0)
1116 goto error;
1117
1118 return 0;
1119
1120 error:
1121 media_entity_cleanup(&ccp2->subdev.entity);
1122 return ret;
1123 }
1124
1125 /*
1126 * omap3isp_ccp2_init - CCP2 initialization.
1127 * @isp : Pointer to ISP device
1128 * return negative error code or zero on success
1129 */
omap3isp_ccp2_init(struct isp_device * isp)1130 int omap3isp_ccp2_init(struct isp_device *isp)
1131 {
1132 struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1133 int ret;
1134
1135 init_waitqueue_head(&ccp2->wait);
1136
1137 /*
1138 * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
1139 * complex, which is powered by vdds_csib power rail. Hence the
1140 * request for the regulator.
1141 *
1142 * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
1143 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
1144 * configured.
1145 *
1146 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
1147 */
1148 if (isp->revision == ISP_REVISION_2_0) {
1149 ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
1150 if (IS_ERR(ccp2->vdds_csib)) {
1151 if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER) {
1152 dev_dbg(isp->dev,
1153 "Can't get regulator vdds_csib, deferring probing\n");
1154 return -EPROBE_DEFER;
1155 }
1156 dev_dbg(isp->dev,
1157 "Could not get regulator vdds_csib\n");
1158 ccp2->vdds_csib = NULL;
1159 }
1160 ccp2->phy = &isp->isp_csiphy2;
1161 } else if (isp->revision == ISP_REVISION_15_0) {
1162 ccp2->phy = &isp->isp_csiphy1;
1163 }
1164
1165 ret = ccp2_init_entities(ccp2);
1166 if (ret < 0)
1167 return ret;
1168
1169 ccp2_reset(ccp2);
1170 return 0;
1171 }
1172
1173 /*
1174 * omap3isp_ccp2_cleanup - CCP2 un-initialization
1175 * @isp : Pointer to ISP device
1176 */
omap3isp_ccp2_cleanup(struct isp_device * isp)1177 void omap3isp_ccp2_cleanup(struct isp_device *isp)
1178 {
1179 struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1180
1181 omap3isp_video_cleanup(&ccp2->video_in);
1182 media_entity_cleanup(&ccp2->subdev.entity);
1183 }
1184