1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * ipmi_smi.h
4 *
5 * MontaVista IPMI system management interface
6 *
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <minyard@mvista.com>
9 * source@mvista.com
10 *
11 * Copyright 2002 MontaVista Software Inc.
12 *
13 */
14
15 #ifndef __LINUX_IPMI_SMI_H
16 #define __LINUX_IPMI_SMI_H
17
18 #include <linux/ipmi_msgdefs.h>
19 #include <linux/proc_fs.h>
20 #include <linux/platform_device.h>
21 #include <linux/ipmi.h>
22
23 struct device;
24
25 /*
26 * This files describes the interface for IPMI system management interface
27 * drivers to bind into the IPMI message handler.
28 */
29
30 /* Structure for the low-level drivers. */
31 struct ipmi_smi;
32
33 /*
34 * Flags for set_check_watch() below. Tells if the SMI should be
35 * waiting for watchdog timeouts, commands and/or messages.
36 */
37 #define IPMI_WATCH_MASK_CHECK_MESSAGES (1 << 0)
38 #define IPMI_WATCH_MASK_CHECK_WATCHDOG (1 << 1)
39 #define IPMI_WATCH_MASK_CHECK_COMMANDS (1 << 2)
40
41 /*
42 * SMI messages
43 *
44 * When communicating with an SMI, messages come in two formats:
45 *
46 * * Normal (to a BMC over a BMC interface)
47 *
48 * * IPMB (over a IPMB to another MC)
49 *
50 * When normal, commands are sent using the format defined by a
51 * standard message over KCS (NetFn must be even):
52 *
53 * +-----------+-----+------+
54 * | NetFn/LUN | Cmd | Data |
55 * +-----------+-----+------+
56 *
57 * And responses, similarly, with an completion code added (NetFn must
58 * be odd):
59 *
60 * +-----------+-----+------+------+
61 * | NetFn/LUN | Cmd | CC | Data |
62 * +-----------+-----+------+------+
63 *
64 * With normal messages, only commands are sent and only responses are
65 * received.
66 *
67 * In IPMB mode, we are acting as an IPMB device. Commands will be in
68 * the following format (NetFn must be even):
69 *
70 * +-------------+------+-------------+-----+------+
71 * | NetFn/rsLUN | Addr | rqSeq/rqLUN | Cmd | Data |
72 * +-------------+------+-------------+-----+------+
73 *
74 * Responses will using the following format:
75 *
76 * +-------------+------+-------------+-----+------+------+
77 * | NetFn/rqLUN | Addr | rqSeq/rsLUN | Cmd | CC | Data |
78 * +-------------+------+-------------+-----+------+------+
79 *
80 * This is similar to the format defined in the IPMB manual section
81 * 2.11.1 with the checksums and the first address removed. Also, the
82 * address is always the remote address.
83 *
84 * IPMB messages can be commands and responses in both directions.
85 * Received commands are handled as received commands from the message
86 * queue.
87 */
88
89 enum ipmi_smi_msg_type {
90 IPMI_SMI_MSG_TYPE_NORMAL = 0,
91 IPMI_SMI_MSG_TYPE_IPMB_DIRECT
92 };
93
94 /*
95 * Messages to/from the lower layer. The smi interface will take one
96 * of these to send. After the send has occurred and a response has
97 * been received, it will report this same data structure back up to
98 * the upper layer. If an error occurs, it should fill in the
99 * response with an error code in the completion code location. When
100 * asynchronous data is received, one of these is allocated, the
101 * data_size is set to zero and the response holds the data from the
102 * get message or get event command that the interface initiated.
103 * Note that it is the interfaces responsibility to detect
104 * asynchronous data and messages and request them from the
105 * interface.
106 */
107 struct ipmi_smi_msg {
108 struct list_head link;
109
110 enum ipmi_smi_msg_type type;
111
112 long msgid;
113 void *user_data;
114
115 int data_size;
116 unsigned char data[IPMI_MAX_MSG_LENGTH];
117
118 int rsp_size;
119 unsigned char rsp[IPMI_MAX_MSG_LENGTH];
120
121 /*
122 * Will be called when the system is done with the message
123 * (presumably to free it).
124 */
125 void (*done)(struct ipmi_smi_msg *msg);
126 };
127
128 #define INIT_IPMI_SMI_MSG(done_handler) \
129 { \
130 .done = done_handler, \
131 .type = IPMI_SMI_MSG_TYPE_NORMAL \
132 }
133
134 struct ipmi_smi_handlers {
135 struct module *owner;
136
137 /* Capabilities of the SMI. */
138 #define IPMI_SMI_CAN_HANDLE_IPMB_DIRECT (1 << 0)
139 unsigned int flags;
140
141 /*
142 * The low-level interface cannot start sending messages to
143 * the upper layer until this function is called. This may
144 * not be NULL, the lower layer must take the interface from
145 * this call.
146 */
147 int (*start_processing)(void *send_info,
148 struct ipmi_smi *new_intf);
149
150 /*
151 * When called, the low-level interface should disable all
152 * processing, it should be complete shut down when it returns.
153 */
154 void (*shutdown)(void *send_info);
155
156 /*
157 * Get the detailed private info of the low level interface and store
158 * it into the structure of ipmi_smi_data. For example: the
159 * ACPI device handle will be returned for the pnp_acpi IPMI device.
160 */
161 int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data);
162
163 /*
164 * Called to enqueue an SMI message to be sent. This
165 * operation is not allowed to fail. If an error occurs, it
166 * should report back the error in a received message. It may
167 * do this in the current call context, since no write locks
168 * are held when this is run. Message are delivered one at
169 * a time by the message handler, a new message will not be
170 * delivered until the previous message is returned.
171 */
172 void (*sender)(void *send_info,
173 struct ipmi_smi_msg *msg);
174
175 /*
176 * Called by the upper layer to request that we try to get
177 * events from the BMC we are attached to.
178 */
179 void (*request_events)(void *send_info);
180
181 /*
182 * Called by the upper layer when some user requires that the
183 * interface watch for received messages and watchdog
184 * pretimeouts (basically do a "Get Flags", or not. Used by
185 * the SMI to know if it should watch for these. This may be
186 * NULL if the SMI does not implement it. watch_mask is from
187 * IPMI_WATCH_MASK_xxx above. The interface should run slower
188 * timeouts for just watchdog checking or faster timeouts when
189 * waiting for the message queue.
190 */
191 void (*set_need_watch)(void *send_info, unsigned int watch_mask);
192
193 /*
194 * Called when flushing all pending messages.
195 */
196 void (*flush_messages)(void *send_info);
197
198 /*
199 * Called when the interface should go into "run to
200 * completion" mode. If this call sets the value to true, the
201 * interface should make sure that all messages are flushed
202 * out and that none are pending, and any new requests are run
203 * to completion immediately.
204 */
205 void (*set_run_to_completion)(void *send_info, bool run_to_completion);
206
207 /*
208 * Called to poll for work to do. This is so upper layers can
209 * poll for operations during things like crash dumps.
210 */
211 void (*poll)(void *send_info);
212
213 /*
214 * Enable/disable firmware maintenance mode. Note that this
215 * is *not* the modes defined, this is simply an on/off
216 * setting. The message handler does the mode handling. Note
217 * that this is called from interrupt context, so it cannot
218 * block.
219 */
220 void (*set_maintenance_mode)(void *send_info, bool enable);
221 };
222
223 struct ipmi_device_id {
224 unsigned char device_id;
225 unsigned char device_revision;
226 unsigned char firmware_revision_1;
227 unsigned char firmware_revision_2;
228 unsigned char ipmi_version;
229 unsigned char additional_device_support;
230 unsigned int manufacturer_id;
231 unsigned int product_id;
232 unsigned char aux_firmware_revision[4];
233 unsigned int aux_firmware_revision_set : 1;
234 };
235
236 #define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
237 #define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
238
239 /*
240 * Take a pointer to an IPMI response and extract device id information from
241 * it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from
242 * a SI response.
243 */
ipmi_demangle_device_id(uint8_t netfn,uint8_t cmd,const unsigned char * data,unsigned int data_len,struct ipmi_device_id * id)244 static inline int ipmi_demangle_device_id(uint8_t netfn, uint8_t cmd,
245 const unsigned char *data,
246 unsigned int data_len,
247 struct ipmi_device_id *id)
248 {
249 if (data_len < 7)
250 return -EINVAL;
251 if (netfn != IPMI_NETFN_APP_RESPONSE || cmd != IPMI_GET_DEVICE_ID_CMD)
252 /* Strange, didn't get the response we expected. */
253 return -EINVAL;
254 if (data[0] != 0)
255 /* That's odd, it shouldn't be able to fail. */
256 return -EINVAL;
257
258 data++;
259 data_len--;
260
261 id->device_id = data[0];
262 id->device_revision = data[1];
263 id->firmware_revision_1 = data[2];
264 id->firmware_revision_2 = data[3];
265 id->ipmi_version = data[4];
266 id->additional_device_support = data[5];
267 if (data_len >= 11) {
268 id->manufacturer_id = (data[6] | (data[7] << 8) |
269 (data[8] << 16));
270 id->product_id = data[9] | (data[10] << 8);
271 } else {
272 id->manufacturer_id = 0;
273 id->product_id = 0;
274 }
275 if (data_len >= 15) {
276 memcpy(id->aux_firmware_revision, data+11, 4);
277 id->aux_firmware_revision_set = 1;
278 } else
279 id->aux_firmware_revision_set = 0;
280
281 return 0;
282 }
283
284 /*
285 * Add a low-level interface to the IPMI driver. Note that if the
286 * interface doesn't know its slave address, it should pass in zero.
287 * The low-level interface should not deliver any messages to the
288 * upper layer until the start_processing() function in the handlers
289 * is called, and the lower layer must get the interface from that
290 * call.
291 */
292 int ipmi_add_smi(struct module *owner,
293 const struct ipmi_smi_handlers *handlers,
294 void *send_info,
295 struct device *dev,
296 unsigned char slave_addr);
297
298 #define ipmi_register_smi(handlers, send_info, dev, slave_addr) \
299 ipmi_add_smi(THIS_MODULE, handlers, send_info, dev, slave_addr)
300
301 /*
302 * Remove a low-level interface from the IPMI driver. This will
303 * return an error if the interface is still in use by a user.
304 */
305 void ipmi_unregister_smi(struct ipmi_smi *intf);
306
307 /*
308 * The lower layer reports received messages through this interface.
309 * The data_size should be zero if this is an asynchronous message. If
310 * the lower layer gets an error sending a message, it should format
311 * an error response in the message response.
312 */
313 void ipmi_smi_msg_received(struct ipmi_smi *intf,
314 struct ipmi_smi_msg *msg);
315
316 /* The lower layer received a watchdog pre-timeout on interface. */
317 void ipmi_smi_watchdog_pretimeout(struct ipmi_smi *intf);
318
319 struct ipmi_smi_msg *ipmi_alloc_smi_msg(void);
ipmi_free_smi_msg(struct ipmi_smi_msg * msg)320 static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg)
321 {
322 msg->done(msg);
323 }
324
325 #endif /* __LINUX_IPMI_SMI_H */
326