1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2018 Synopsys, Inc. All rights reserved.
4  */
5 
6 #include <common.h>
7 #include <malloc.h>
8 #include <dwmmc.h>
9 #include <linux/libfdt.h>
10 #include <fdtdec.h>
11 
12 #include <asm/arcregs.h>
13 
14 DECLARE_GLOBAL_DATA_PTR;
15 
16 #define SYSCON_BASE	0xf000a000
17 #define AHBCKDIV	(void *)(SYSCON_BASE + 0x04)
18 #define APBCKDIV	(void *)(SYSCON_BASE + 0x08)
19 #define APBCKEN		(void *)(SYSCON_BASE + 0x0C)
20 #define RESET_REG	(void *)(SYSCON_BASE + 0x18)
21 #define CLKSEL		(void *)(SYSCON_BASE + 0x24)
22 #define CLKSTAT		(void *)(SYSCON_BASE + 0x28)
23 #define PLLCON		(void *)(SYSCON_BASE + 0x2C)
24 #define APBCKSEL	(void *)(SYSCON_BASE + 0x30)
25 #define AHBCKEN		(void *)(SYSCON_BASE + 0x34)
26 #define USBPHY_PLL	(void *)(SYSCON_BASE + 0x78)
27 #define USBCFG		(void *)(SYSCON_BASE + 0x7c)
28 
29 #define PLL_MASK_0	0xffcfffff
30 #define PLL_MASK_1	0xffcfff00
31 #define PLL_MASK_2	0xfbcfff00
32 
33 #define CLKSEL_DEFAULT	0x5a690000
34 
set_cpu_freq(unsigned int clk)35 static int set_cpu_freq(unsigned int clk)
36 {
37 	clk /= 1000000;
38 
39 	/* Set clk to ext Xtal (LSN value 0) */
40 	writel(CLKSEL_DEFAULT, CLKSEL);
41 
42 	switch (clk) {
43 	case 16:
44 		/* Bypass mode */
45 		return 0;
46 
47 	case 50:
48 		writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
49 		/* pll_off=1, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
50 		writel((readl(PLLCON) & PLL_MASK_1) | 0x300191, PLLCON);
51 		/* pll_off=0, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
52 		writel((readl(PLLCON) & PLL_MASK_2) | 0x300191, PLLCON);
53 		break;
54 
55 	case 72:
56 		writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
57 		/* pll_off=1, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
58 		writel((readl(PLLCON) & PLL_MASK_1) | 0x200121, PLLCON);
59 		/* pll_off=0, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
60 		writel((readl(PLLCON) & PLL_MASK_2) | 0x200121, PLLCON);
61 		break;
62 
63 	case 100:
64 		writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
65 		/* pll_off=1,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
66 		writel((readl(PLLCON) & PLL_MASK_1) | 0x200191, PLLCON);
67 		/* pll_off=0,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
68 		writel((readl(PLLCON) & PLL_MASK_2) | 0x200191, PLLCON);
69 		break;
70 
71 	case 136:
72 		writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
73 		/* pll_off=1, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
74 		writel((readl(PLLCON) & PLL_MASK_1) | 0x100111, PLLCON);
75 		/* pll_off=0, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
76 		writel((readl(PLLCON) & PLL_MASK_2) | 0x100111, PLLCON);
77 		break;
78 
79 	case 144:
80 		writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
81 		/* pll_off=1, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
82 		writel((readl(PLLCON) & PLL_MASK_1) | 0x100121, PLLCON);
83 		/* pll_off=0, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
84 		writel((readl(PLLCON) & PLL_MASK_2) | 0x100121, PLLCON);
85 		break;
86 
87 	default:
88 		return -EINVAL;
89 	}
90 
91 	while (!(readl(CLKSTAT) & 0x4))
92 		;
93 
94 	/* Set clk from PLL on bus (LSN = 1) */
95 	writel(CLKSEL_DEFAULT | BIT(0), CLKSEL);
96 
97 	return 0;
98 }
99 
100 extern u8 __rom_end[];
101 extern u8 __ram_start[];
102 extern u8 __ram_end[];
103 
104 /*
105  * Use mach_cpu_init() for .data section copy as board_early_init_f() will be
106  * too late: initf_dm() will use a value of "av_" variable from not yet
107  * initialized (by copy) area.
108  */
mach_cpu_init(void)109 int mach_cpu_init(void)
110 {
111 	int offset;
112 
113 	/* Don't relocate U-Boot */
114 	gd->flags |= GD_FLG_SKIP_RELOC;
115 
116 	/* Copy data from ROM to RAM */
117 	u8 *src = __rom_end;
118 	u8 *dst = __ram_start;
119 
120 	while (dst < __ram_end)
121 		*dst++ = *src++;
122 
123 	/* Enable debug uart */
124 #define DEBUG_UART_BASE		0x80014000
125 #define DEBUG_UART_DLF_OFFSET	0xc0
126 	write_aux_reg(DEBUG_UART_BASE + DEBUG_UART_DLF_OFFSET, 1);
127 
128 	offset = fdt_path_offset(gd->fdt_blob, "/cpu_card/core_clk");
129 	if (offset < 0)
130 		return offset;
131 
132 	gd->cpu_clk = fdtdec_get_int(gd->fdt_blob, offset, "clock-frequency", 0);
133 	if (!gd->cpu_clk)
134 		return -EINVAL;
135 
136 	/* If CPU freq > 100 MHz, divide eFLASH clock by 2 */
137 	if (gd->cpu_clk > 100000000) {
138 		u32 reg = readl(AHBCKDIV);
139 
140 		reg &= ~(0xF << 8);
141 		reg |= 2 << 8;
142 		writel(reg, AHBCKDIV);
143 	}
144 
145 	return set_cpu_freq(gd->cpu_clk);
146 }
147 
148 #define ARC_PERIPHERAL_BASE	0xF0000000
149 #define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xB000)
150 
board_mmc_init(bd_t * bis)151 int board_mmc_init(bd_t *bis)
152 {
153 	struct dwmci_host *host = NULL;
154 
155 	host = malloc(sizeof(struct dwmci_host));
156 	if (!host) {
157 		printf("dwmci_host malloc fail!\n");
158 		return -ENOMEM;
159 	}
160 
161 	memset(host, 0, sizeof(struct dwmci_host));
162 	host->name = "Synopsys Mobile storage";
163 	host->ioaddr = (void *)SDIO_BASE;
164 	host->buswidth = 4;
165 	host->dev_index = 0;
166 	host->bus_hz = 50000000;
167 
168 	add_dwmci(host, host->bus_hz / 2, 400000);
169 
170 	return 0;
171 }
172 
board_mmc_getcd(struct mmc * mmc)173 int board_mmc_getcd(struct mmc *mmc)
174 {
175 	struct dwmci_host *host = mmc->priv;
176 
177 	return !(dwmci_readl(host, DWMCI_CDETECT) & 1);
178 }
179 
180 #define IOTDK_RESET_SEQ		0x55AA6699
181 
reset_cpu(ulong addr)182 void reset_cpu(ulong addr)
183 {
184 	writel(IOTDK_RESET_SEQ, RESET_REG);
185 }
186 
checkboard(void)187 int checkboard(void)
188 {
189 	puts("Board: Synopsys IoT Development Kit\n");
190 	return 0;
191 };
192