1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2005-2014 Intel Corporation
4  * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
5  * Copyright (C) 2016-2017 Intel Deutschland GmbH
6  */
7 #ifndef __iwl_fw_api_cmdhdr_h__
8 #define __iwl_fw_api_cmdhdr_h__
9 
10 /**
11  * DOC: Host command section
12  *
13  * A host command is a command issued by the upper layer to the fw. There are
14  * several versions of fw that have several APIs. The transport layer is
15  * completely agnostic to these differences.
16  * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
17  */
18 #define SEQ_TO_QUEUE(s)	(((s) >> 8) & 0x1f)
19 #define QUEUE_TO_SEQ(q)	(((q) & 0x1f) << 8)
20 #define SEQ_TO_INDEX(s)	((s) & 0xff)
21 #define INDEX_TO_SEQ(i)	((i) & 0xff)
22 #define SEQ_RX_FRAME	cpu_to_le16(0x8000)
23 
24 /*
25  * those functions retrieve specific information from
26  * the id field in the iwl_host_cmd struct which contains
27  * the command id, the group id and the version of the command
28  * and vice versa
29 */
iwl_cmd_opcode(u32 cmdid)30 static inline u8 iwl_cmd_opcode(u32 cmdid)
31 {
32 	return cmdid & 0xFF;
33 }
34 
iwl_cmd_groupid(u32 cmdid)35 static inline u8 iwl_cmd_groupid(u32 cmdid)
36 {
37 	return ((cmdid & 0xFF00) >> 8);
38 }
39 
iwl_cmd_version(u32 cmdid)40 static inline u8 iwl_cmd_version(u32 cmdid)
41 {
42 	return ((cmdid & 0xFF0000) >> 16);
43 }
44 
iwl_cmd_id(u8 opcode,u8 groupid,u8 version)45 static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
46 {
47 	return opcode + (groupid << 8) + (version << 16);
48 }
49 
50 /* make u16 wide id out of u8 group and opcode */
51 #define WIDE_ID(grp, opcode) (((grp) << 8) | (opcode))
52 #define DEF_ID(opcode) ((1 << 8) | (opcode))
53 
54 /* due to the conversion, this group is special; new groups
55  * should be defined in the appropriate fw-api header files
56  */
57 #define IWL_ALWAYS_LONG_GROUP	1
58 
59 /**
60  * struct iwl_cmd_header - (short) command header format
61  *
62  * This header format appears in the beginning of each command sent from the
63  * driver, and each response/notification received from uCode.
64  */
65 struct iwl_cmd_header {
66 	/**
67 	 * @cmd: Command ID: REPLY_RXON, etc.
68 	 */
69 	u8 cmd;
70 	/**
71 	 * @group_id: group ID, for commands with groups
72 	 */
73 	u8 group_id;
74 	/**
75 	 * @sequence:
76 	 * Sequence number for the command.
77 	 *
78 	 * The driver sets up the sequence number to values of its choosing.
79 	 * uCode does not use this value, but passes it back to the driver
80 	 * when sending the response to each driver-originated command, so
81 	 * the driver can match the response to the command.  Since the values
82 	 * don't get used by uCode, the driver may set up an arbitrary format.
83 	 *
84 	 * There is one exception:  uCode sets bit 15 when it originates
85 	 * the response/notification, i.e. when the response/notification
86 	 * is not a direct response to a command sent by the driver.  For
87 	 * example, uCode issues REPLY_RX when it sends a received frame
88 	 * to the driver; it is not a direct response to any driver command.
89 	 *
90 	 * The Linux driver uses the following format:
91 	 *
92 	 *  0:7		tfd index - position within TX queue
93 	 *  8:12	TX queue id
94 	 *  13:14	reserved
95 	 *  15		unsolicited RX or uCode-originated notification
96 	 */
97 	__le16 sequence;
98 } __packed;
99 
100 /**
101  * struct iwl_cmd_header_wide
102  *
103  * This header format appears in the beginning of each command sent from the
104  * driver, and each response/notification received from uCode.
105  * this is the wide version that contains more information about the command
106  * like length, version and command type
107  *
108  * @cmd: command ID, like in &struct iwl_cmd_header
109  * @group_id: group ID, like in &struct iwl_cmd_header
110  * @sequence: sequence, like in &struct iwl_cmd_header
111  * @length: length of the command
112  * @reserved: reserved
113  * @version: command version
114  */
115 struct iwl_cmd_header_wide {
116 	u8 cmd;
117 	u8 group_id;
118 	__le16 sequence;
119 	__le16 length;
120 	u8 reserved;
121 	u8 version;
122 } __packed;
123 
124 /**
125  * struct iwl_calib_res_notif_phy_db - Receive phy db chunk after calibrations
126  * @type: type of the result - mostly ignored
127  * @length: length of the data
128  * @data: data, length in @length
129  */
130 struct iwl_calib_res_notif_phy_db {
131 	__le16 type;
132 	__le16 length;
133 	u8 data[];
134 } __packed;
135 
136 /**
137  * struct iwl_phy_db_cmd - configure operational ucode
138  * @type: type of the data
139  * @length: length of the data
140  * @data: data, length in @length
141  */
142 struct iwl_phy_db_cmd {
143 	__le16 type;
144 	__le16 length;
145 	u8 data[];
146 } __packed;
147 
148 /**
149  * struct iwl_cmd_response - generic response struct for most commands
150  * @status: status of the command asked, changes for each one
151  */
152 struct iwl_cmd_response {
153 	__le32 status;
154 };
155 
156 #endif /* __iwl_fw_api_cmdhdr_h__ */
157