1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * g760a - Driver for the Global Mixed-mode Technology Inc. G760A
4 * fan speed PWM controller chip
5 *
6 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
7 *
8 * Complete datasheet is available at GMT's website:
9 * http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
10 */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/slab.h>
15 #include <linux/jiffies.h>
16 #include <linux/i2c.h>
17 #include <linux/hwmon.h>
18 #include <linux/hwmon-sysfs.h>
19 #include <linux/err.h>
20 #include <linux/mutex.h>
21 #include <linux/sysfs.h>
22
23 enum g760a_regs {
24 G760A_REG_SET_CNT = 0x00,
25 G760A_REG_ACT_CNT = 0x01,
26 G760A_REG_FAN_STA = 0x02
27 };
28
29 #define G760A_REG_FAN_STA_RPM_OFF 0x1 /* +/-20% off */
30 #define G760A_REG_FAN_STA_RPM_LOW 0x2 /* below 1920rpm */
31
32 /* register data is read (and cached) at most once per second */
33 #define G760A_UPDATE_INTERVAL (HZ)
34
35 struct g760a_data {
36 struct i2c_client *client;
37 struct mutex update_lock;
38
39 /* board specific parameters */
40 u32 clk; /* default 32kHz */
41 u16 fan_div; /* default P=2 */
42
43 /* g760a register cache */
44 unsigned int valid:1;
45 unsigned long last_updated; /* In jiffies */
46
47 u8 set_cnt; /* PWM (period) count number; 0xff stops fan */
48 u8 act_cnt; /* formula: cnt = (CLK * 30)/(rpm * P) */
49 u8 fan_sta; /* bit 0: set when actual fan speed more than 20%
50 * outside requested fan speed
51 * bit 1: set when fan speed below 1920 rpm
52 */
53 };
54
55 #define G760A_DEFAULT_CLK 32768
56 #define G760A_DEFAULT_FAN_DIV 2
57
58 #define PWM_FROM_CNT(cnt) (0xff-(cnt))
59 #define PWM_TO_CNT(pwm) (0xff-(pwm))
60
rpm_from_cnt(u8 val,u32 clk,u16 div)61 static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
62 {
63 return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
64 }
65
66 /* read/write wrappers */
g760a_read_value(struct i2c_client * client,enum g760a_regs reg)67 static int g760a_read_value(struct i2c_client *client, enum g760a_regs reg)
68 {
69 return i2c_smbus_read_byte_data(client, reg);
70 }
71
g760a_write_value(struct i2c_client * client,enum g760a_regs reg,u16 value)72 static int g760a_write_value(struct i2c_client *client, enum g760a_regs reg,
73 u16 value)
74 {
75 return i2c_smbus_write_byte_data(client, reg, value);
76 }
77
78 /*
79 * sysfs attributes
80 */
81
g760a_update_client(struct device * dev)82 static struct g760a_data *g760a_update_client(struct device *dev)
83 {
84 struct g760a_data *data = dev_get_drvdata(dev);
85 struct i2c_client *client = data->client;
86
87 mutex_lock(&data->update_lock);
88
89 if (time_after(jiffies, data->last_updated + G760A_UPDATE_INTERVAL)
90 || !data->valid) {
91 dev_dbg(&client->dev, "Starting g760a update\n");
92
93 data->set_cnt = g760a_read_value(client, G760A_REG_SET_CNT);
94 data->act_cnt = g760a_read_value(client, G760A_REG_ACT_CNT);
95 data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA);
96
97 data->last_updated = jiffies;
98 data->valid = true;
99 }
100
101 mutex_unlock(&data->update_lock);
102
103 return data;
104 }
105
fan1_input_show(struct device * dev,struct device_attribute * da,char * buf)106 static ssize_t fan1_input_show(struct device *dev,
107 struct device_attribute *da, char *buf)
108 {
109 struct g760a_data *data = g760a_update_client(dev);
110 unsigned int rpm = 0;
111
112 mutex_lock(&data->update_lock);
113 if (!(data->fan_sta & G760A_REG_FAN_STA_RPM_LOW))
114 rpm = rpm_from_cnt(data->act_cnt, data->clk, data->fan_div);
115 mutex_unlock(&data->update_lock);
116
117 return sprintf(buf, "%d\n", rpm);
118 }
119
fan1_alarm_show(struct device * dev,struct device_attribute * da,char * buf)120 static ssize_t fan1_alarm_show(struct device *dev,
121 struct device_attribute *da, char *buf)
122 {
123 struct g760a_data *data = g760a_update_client(dev);
124
125 int fan_alarm = (data->fan_sta & G760A_REG_FAN_STA_RPM_OFF) ? 1 : 0;
126
127 return sprintf(buf, "%d\n", fan_alarm);
128 }
129
pwm1_show(struct device * dev,struct device_attribute * da,char * buf)130 static ssize_t pwm1_show(struct device *dev, struct device_attribute *da,
131 char *buf)
132 {
133 struct g760a_data *data = g760a_update_client(dev);
134
135 return sprintf(buf, "%d\n", PWM_FROM_CNT(data->set_cnt));
136 }
137
pwm1_store(struct device * dev,struct device_attribute * da,const char * buf,size_t count)138 static ssize_t pwm1_store(struct device *dev, struct device_attribute *da,
139 const char *buf, size_t count)
140 {
141 struct g760a_data *data = g760a_update_client(dev);
142 struct i2c_client *client = data->client;
143 unsigned long val;
144
145 if (kstrtoul(buf, 10, &val))
146 return -EINVAL;
147
148 mutex_lock(&data->update_lock);
149 data->set_cnt = PWM_TO_CNT(clamp_val(val, 0, 255));
150 g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
151 mutex_unlock(&data->update_lock);
152
153 return count;
154 }
155
156 static DEVICE_ATTR_RW(pwm1);
157 static DEVICE_ATTR_RO(fan1_input);
158 static DEVICE_ATTR_RO(fan1_alarm);
159
160 static struct attribute *g760a_attrs[] = {
161 &dev_attr_pwm1.attr,
162 &dev_attr_fan1_input.attr,
163 &dev_attr_fan1_alarm.attr,
164 NULL
165 };
166
167 ATTRIBUTE_GROUPS(g760a);
168
169 /*
170 * new-style driver model code
171 */
172
g760a_probe(struct i2c_client * client)173 static int g760a_probe(struct i2c_client *client)
174 {
175 struct device *dev = &client->dev;
176 struct g760a_data *data;
177 struct device *hwmon_dev;
178
179 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
180 return -EIO;
181
182 data = devm_kzalloc(dev, sizeof(struct g760a_data), GFP_KERNEL);
183 if (!data)
184 return -ENOMEM;
185
186 data->client = client;
187 mutex_init(&data->update_lock);
188
189 /* setup default configuration for now */
190 data->fan_div = G760A_DEFAULT_FAN_DIV;
191 data->clk = G760A_DEFAULT_CLK;
192
193 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
194 data,
195 g760a_groups);
196 return PTR_ERR_OR_ZERO(hwmon_dev);
197 }
198
199 static const struct i2c_device_id g760a_id[] = {
200 { "g760a", 0 },
201 { }
202 };
203 MODULE_DEVICE_TABLE(i2c, g760a_id);
204
205 static struct i2c_driver g760a_driver = {
206 .driver = {
207 .name = "g760a",
208 },
209 .probe = g760a_probe,
210 .id_table = g760a_id,
211 };
212
213 module_i2c_driver(g760a_driver);
214
215 MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
216 MODULE_DESCRIPTION("GMT G760A driver");
217 MODULE_LICENSE("GPL");
218