xref: /openbmc/linux/drivers/spi/spi-test.h (revision c942fddf)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  *  linux/drivers/spi/spi-test.h
4  *
5  *  (c) Martin Sperl <kernel@martin.sperl.org>
6  *
7  *  spi_test definitions
8  */
9 
10 #include <linux/spi/spi.h>
11 
12 #define SPI_TEST_MAX_TRANSFERS 4
13 #define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE)
14 #define SPI_TEST_MAX_ITERATE 32
15 
16 /* the "dummy" start addresses used in spi_test
17  * these addresses get translated at a later stage
18  */
19 #define RX_START	BIT(30)
20 #define TX_START	BIT(31)
21 #define RX(off)		((void *)(RX_START + off))
22 #define TX(off)		((void *)(TX_START + off))
23 
24 /* some special defines for offsets */
25 #define SPI_TEST_MAX_SIZE_HALF	BIT(29)
26 
27 /* detection pattern for unfinished reads...
28  * - 0x00 or 0xff could be valid levels for tx_buf = NULL,
29  * so we do not use either of them
30  */
31 #define SPI_TEST_PATTERN_UNWRITTEN 0xAA
32 #define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55
33 #define SPI_TEST_CHECK_DO_NOT_WRITE 64
34 
35 /**
36  * struct spi_test - describes a specific (set of) tests to execute
37  *
38  * @description:      description of the test
39  *
40  * @msg:              a template @spi_message usedfor the default settings
41  * @transfers:        array of @spi_transfers that are part of the
42  *                    resulting spi_message.
43  * @transfer_count:   number of transfers
44  *
45  * @run_test:         run a specific spi_test - this allows to override
46  *                    the default implementation of @spi_test_run_transfer
47  *                    either to add some custom filters for a specific test
48  *                    or to effectively run some very custom tests...
49  * @execute_msg:      run the spi_message for real - this allows to override
50  *                    @spi_test_execute_msg to apply final modifications
51  *                    on the spi_message
52  * @expected_return:  the expected return code - in some cases we want to
53  *                    test also for error conditions
54  *
55  * @iterate_len:      list of length to iterate on
56  * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
57  *                    for all values in the below range if set.
58  *                    the ranges are:
59  *                    [0 : @spi_master.dma_alignment[ if set
60  *                    [0 : iterate_tx_align[ if unset
61  * @iterate_rx_align: change the alignment of @spi_transfer.rx_buf
62  *                    see @iterate_tx_align for details
63  * @iterate_transfer_mask: the bitmask of transfers to which the iterations
64  *                         apply - if 0, then it applies to all transfer
65  *
66  * @fill_option:      define the way how tx_buf is filled
67  * @fill_pattern:     fill pattern to apply to the tx_buf
68  *                    (used in some of the @fill_options)
69  * @elapsed_time:     elapsed time in nanoseconds
70  */
71 
72 struct spi_test {
73 	char description[64];
74 	struct spi_message msg;
75 	struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS];
76 	unsigned int transfer_count;
77 	int (*run_test)(struct spi_device *spi, struct spi_test *test,
78 			void *tx, void *rx);
79 	int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
80 			   void *tx, void *rx);
81 	int expected_return;
82 	/* iterate over all values, terminated by a -1 */
83 	int iterate_len[SPI_TEST_MAX_ITERATE];
84 	int iterate_tx_align;
85 	int iterate_rx_align;
86 	u32 iterate_transfer_mask;
87 	/* the tx-fill operation */
88 	u32 fill_option;
89 #define FILL_MEMSET_8	0	/* just memset with 8 bit */
90 #define FILL_MEMSET_16	1	/* just memset with 16 bit */
91 #define FILL_MEMSET_24	2	/* just memset with 24 bit */
92 #define FILL_MEMSET_32	3	/* just memset with 32 bit */
93 #define FILL_COUNT_8	4	/* fill with a 8 byte counter */
94 #define FILL_COUNT_16	5	/* fill with a 16 bit counter */
95 #define FILL_COUNT_24	6	/* fill with a 24 bit counter */
96 #define FILL_COUNT_32	7	/* fill with a 32 bit counter */
97 #define FILL_TRANSFER_BYTE_8  8	/* fill with the transfer byte - 8 bit */
98 #define FILL_TRANSFER_BYTE_16 9	/* fill with the transfer byte - 16 bit */
99 #define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */
100 #define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
101 #define FILL_TRANSFER_NUM     16 /* fill with the transfer number */
102 	u32 fill_pattern;
103 	unsigned long long elapsed_time;
104 };
105 
106 /* default implementation for @spi_test.run_test */
107 int spi_test_run_test(struct spi_device *spi,
108 		      const struct spi_test *test,
109 		      void *tx, void *rx);
110 
111 /* default implementation for @spi_test.execute_msg */
112 int spi_test_execute_msg(struct spi_device *spi,
113 			 struct spi_test *test,
114 			 void *tx, void *rx);
115 
116 /* function to execute a set of tests */
117 int spi_test_run_tests(struct spi_device *spi,
118 		       struct spi_test *tests);
119 
120 #define ITERATE_LEN_LIST 0, 1, 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
121 		1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
122 /* some of the default @spi_transfer.len to test, terminated by a -1 */
123 #define ITERATE_LEN ITERATE_LEN_LIST, -1
124 #define ITERATE_MAX_LEN ITERATE_LEN_LIST, (SPI_TEST_MAX_SIZE - 1), \
125 		SPI_TEST_MAX_SIZE, -1
126 
127 /* the default alignment to test */
128 #define ITERATE_ALIGN sizeof(int)
129