1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
4 //
5 // Supported Part Numbers:
6 // FAN53555UC00X/01X/03X/04X/05X
7 //
8 // Copyright (c) 2012 Marvell Technology Ltd.
9 // Yunfan Zhang <yfzhang@marvell.com>
10
11 #include <linux/bitops.h>
12 #include <linux/err.h>
13 #include <linux/i2c.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/param.h>
17 #include <linux/platform_device.h>
18 #include <linux/regmap.h>
19 #include <linux/regulator/driver.h>
20 #include <linux/regulator/fan53555.h>
21 #include <linux/regulator/machine.h>
22 #include <linux/regulator/of_regulator.h>
23 #include <linux/slab.h>
24
25 /* Voltage setting */
26 #define FAN53555_VSEL0 0x00
27 #define FAN53555_VSEL1 0x01
28
29 #define RK8602_VSEL0 0x06
30 #define RK8602_VSEL1 0x07
31
32 #define TCS4525_VSEL0 0x11
33 #define TCS4525_VSEL1 0x10
34 #define TCS4525_TIME 0x13
35 #define TCS4525_COMMAND 0x14
36
37 /* Control register */
38 #define FAN53555_CONTROL 0x02
39 /* IC Type */
40 #define FAN53555_ID1 0x03
41 /* IC mask version */
42 #define FAN53555_ID2 0x04
43 /* Monitor register */
44 #define FAN53555_MONITOR 0x05
45
46 /* VSEL bit definitions */
47 #define VSEL_BUCK_EN BIT(7)
48 #define VSEL_MODE BIT(6)
49 /* Chip ID and Verison */
50 #define DIE_ID 0x0F /* ID1 */
51 #define DIE_REV 0x0F /* ID2 */
52 /* Control bit definitions */
53 #define CTL_OUTPUT_DISCHG BIT(7)
54 #define CTL_SLEW_MASK GENMASK(6, 4)
55 #define CTL_RESET BIT(2)
56 #define CTL_MODE_VSEL0_MODE BIT(0)
57 #define CTL_MODE_VSEL1_MODE BIT(1)
58
59 #define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
60 #define FAN53526_NVOLTAGES 128
61 #define RK8602_NVOLTAGES 160
62
63 #define TCS_VSEL0_MODE BIT(7)
64 #define TCS_VSEL1_MODE BIT(6)
65
66 #define TCS_SLEW_MASK GENMASK(4, 3)
67
68 enum fan53555_vendor {
69 FAN53526_VENDOR_FAIRCHILD = 0,
70 FAN53555_VENDOR_FAIRCHILD,
71 FAN53555_VENDOR_ROCKCHIP, /* RK8600, RK8601 */
72 RK8602_VENDOR_ROCKCHIP, /* RK8602, RK8603 */
73 FAN53555_VENDOR_SILERGY,
74 FAN53526_VENDOR_TCS,
75 };
76
77 enum {
78 FAN53526_CHIP_ID_01 = 1,
79 };
80
81 enum {
82 FAN53526_CHIP_REV_08 = 8,
83 };
84
85 /* IC Type */
86 enum {
87 FAN53555_CHIP_ID_00 = 0,
88 FAN53555_CHIP_ID_01,
89 FAN53555_CHIP_ID_02,
90 FAN53555_CHIP_ID_03,
91 FAN53555_CHIP_ID_04,
92 FAN53555_CHIP_ID_05,
93 FAN53555_CHIP_ID_08 = 8,
94 };
95
96 enum {
97 RK8600_CHIP_ID_08 = 8, /* RK8600, RK8601 */
98 };
99
100 enum {
101 RK8602_CHIP_ID_10 = 10, /* RK8602, RK8603 */
102 };
103
104 enum {
105 TCS4525_CHIP_ID_12 = 12,
106 };
107
108 enum {
109 TCS4526_CHIP_ID_00 = 0,
110 };
111
112 /* IC mask revision */
113 enum {
114 FAN53555_CHIP_REV_00 = 0x3,
115 FAN53555_CHIP_REV_13 = 0xf,
116 };
117
118 enum {
119 SILERGY_SYR82X = 8,
120 SILERGY_SYR83X = 9,
121 };
122
123 struct fan53555_device_info {
124 enum fan53555_vendor vendor;
125 struct device *dev;
126 struct regulator_desc desc;
127 struct regulator_init_data *regulator;
128 /* IC Type and Rev */
129 int chip_id;
130 int chip_rev;
131 /* Voltage setting register */
132 unsigned int vol_reg;
133 unsigned int sleep_reg;
134 unsigned int en_reg;
135 unsigned int sleep_en_reg;
136 /* Voltage range and step(linear) */
137 unsigned int vsel_min;
138 unsigned int vsel_step;
139 unsigned int vsel_count;
140 /* Mode */
141 unsigned int mode_reg;
142 unsigned int mode_mask;
143 /* Sleep voltage cache */
144 unsigned int sleep_vol_cache;
145 /* Slew rate */
146 unsigned int slew_reg;
147 unsigned int slew_mask;
148 const unsigned int *ramp_delay_table;
149 unsigned int n_ramp_values;
150 unsigned int slew_rate;
151 };
152
fan53555_set_suspend_voltage(struct regulator_dev * rdev,int uV)153 static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
154 {
155 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
156 int ret;
157
158 if (di->sleep_vol_cache == uV)
159 return 0;
160 ret = regulator_map_voltage_linear(rdev, uV, uV);
161 if (ret < 0)
162 return ret;
163 ret = regmap_update_bits(rdev->regmap, di->sleep_reg,
164 di->desc.vsel_mask, ret);
165 if (ret < 0)
166 return ret;
167 /* Cache the sleep voltage setting.
168 * Might not be the real voltage which is rounded */
169 di->sleep_vol_cache = uV;
170
171 return 0;
172 }
173
fan53555_set_suspend_enable(struct regulator_dev * rdev)174 static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
175 {
176 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
177
178 return regmap_update_bits(rdev->regmap, di->sleep_en_reg,
179 VSEL_BUCK_EN, VSEL_BUCK_EN);
180 }
181
fan53555_set_suspend_disable(struct regulator_dev * rdev)182 static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
183 {
184 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
185
186 return regmap_update_bits(rdev->regmap, di->sleep_en_reg,
187 VSEL_BUCK_EN, 0);
188 }
189
fan53555_set_mode(struct regulator_dev * rdev,unsigned int mode)190 static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
191 {
192 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
193
194 switch (mode) {
195 case REGULATOR_MODE_FAST:
196 regmap_update_bits(rdev->regmap, di->mode_reg,
197 di->mode_mask, di->mode_mask);
198 break;
199 case REGULATOR_MODE_NORMAL:
200 regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0);
201 break;
202 default:
203 return -EINVAL;
204 }
205 return 0;
206 }
207
fan53555_get_mode(struct regulator_dev * rdev)208 static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
209 {
210 struct fan53555_device_info *di = rdev_get_drvdata(rdev);
211 unsigned int val;
212 int ret = 0;
213
214 ret = regmap_read(rdev->regmap, di->mode_reg, &val);
215 if (ret < 0)
216 return ret;
217 if (val & di->mode_mask)
218 return REGULATOR_MODE_FAST;
219 else
220 return REGULATOR_MODE_NORMAL;
221 }
222
223 static const unsigned int slew_rates[] = {
224 64000,
225 32000,
226 16000,
227 8000,
228 4000,
229 2000,
230 1000,
231 500,
232 };
233
234 static const unsigned int tcs_slew_rates[] = {
235 18700,
236 9300,
237 4600,
238 2300,
239 };
240
241 static const struct regulator_ops fan53555_regulator_ops = {
242 .set_voltage_sel = regulator_set_voltage_sel_regmap,
243 .get_voltage_sel = regulator_get_voltage_sel_regmap,
244 .set_voltage_time_sel = regulator_set_voltage_time_sel,
245 .map_voltage = regulator_map_voltage_linear,
246 .list_voltage = regulator_list_voltage_linear,
247 .set_suspend_voltage = fan53555_set_suspend_voltage,
248 .enable = regulator_enable_regmap,
249 .disable = regulator_disable_regmap,
250 .is_enabled = regulator_is_enabled_regmap,
251 .set_mode = fan53555_set_mode,
252 .get_mode = fan53555_get_mode,
253 .set_ramp_delay = regulator_set_ramp_delay_regmap,
254 .set_suspend_enable = fan53555_set_suspend_enable,
255 .set_suspend_disable = fan53555_set_suspend_disable,
256 };
257
fan53526_voltages_setup_fairchild(struct fan53555_device_info * di)258 static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
259 {
260 /* Init voltage range and step */
261 switch (di->chip_id) {
262 case FAN53526_CHIP_ID_01:
263 switch (di->chip_rev) {
264 case FAN53526_CHIP_REV_08:
265 di->vsel_min = 600000;
266 di->vsel_step = 6250;
267 break;
268 default:
269 dev_err(di->dev,
270 "Chip ID %d with rev %d not supported!\n",
271 di->chip_id, di->chip_rev);
272 return -EINVAL;
273 }
274 break;
275 default:
276 dev_err(di->dev,
277 "Chip ID %d not supported!\n", di->chip_id);
278 return -EINVAL;
279 }
280
281 di->slew_reg = FAN53555_CONTROL;
282 di->slew_mask = CTL_SLEW_MASK;
283 di->ramp_delay_table = slew_rates;
284 di->n_ramp_values = ARRAY_SIZE(slew_rates);
285 di->vsel_count = FAN53526_NVOLTAGES;
286
287 return 0;
288 }
289
fan53555_voltages_setup_fairchild(struct fan53555_device_info * di)290 static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
291 {
292 /* Init voltage range and step */
293 switch (di->chip_id) {
294 case FAN53555_CHIP_ID_00:
295 switch (di->chip_rev) {
296 case FAN53555_CHIP_REV_00:
297 di->vsel_min = 600000;
298 di->vsel_step = 10000;
299 break;
300 case FAN53555_CHIP_REV_13:
301 di->vsel_min = 800000;
302 di->vsel_step = 10000;
303 break;
304 default:
305 dev_err(di->dev,
306 "Chip ID %d with rev %d not supported!\n",
307 di->chip_id, di->chip_rev);
308 return -EINVAL;
309 }
310 break;
311 case FAN53555_CHIP_ID_01:
312 case FAN53555_CHIP_ID_03:
313 case FAN53555_CHIP_ID_05:
314 case FAN53555_CHIP_ID_08:
315 di->vsel_min = 600000;
316 di->vsel_step = 10000;
317 break;
318 case FAN53555_CHIP_ID_04:
319 di->vsel_min = 603000;
320 di->vsel_step = 12826;
321 break;
322 default:
323 dev_err(di->dev,
324 "Chip ID %d not supported!\n", di->chip_id);
325 return -EINVAL;
326 }
327 di->slew_reg = FAN53555_CONTROL;
328 di->slew_mask = CTL_SLEW_MASK;
329 di->ramp_delay_table = slew_rates;
330 di->n_ramp_values = ARRAY_SIZE(slew_rates);
331 di->vsel_count = FAN53555_NVOLTAGES;
332
333 return 0;
334 }
335
fan53555_voltages_setup_rockchip(struct fan53555_device_info * di)336 static int fan53555_voltages_setup_rockchip(struct fan53555_device_info *di)
337 {
338 /* Init voltage range and step */
339 switch (di->chip_id) {
340 case RK8600_CHIP_ID_08:
341 di->vsel_min = 712500;
342 di->vsel_step = 12500;
343 break;
344 default:
345 dev_err(di->dev,
346 "Chip ID %d not supported!\n", di->chip_id);
347 return -EINVAL;
348 }
349 di->slew_reg = FAN53555_CONTROL;
350 di->slew_mask = CTL_SLEW_MASK;
351 di->ramp_delay_table = slew_rates;
352 di->n_ramp_values = ARRAY_SIZE(slew_rates);
353 di->vsel_count = FAN53555_NVOLTAGES;
354
355 return 0;
356 }
357
rk8602_voltages_setup_rockchip(struct fan53555_device_info * di)358 static int rk8602_voltages_setup_rockchip(struct fan53555_device_info *di)
359 {
360 /* Init voltage range and step */
361 switch (di->chip_id) {
362 case RK8602_CHIP_ID_10:
363 di->vsel_min = 500000;
364 di->vsel_step = 6250;
365 break;
366 default:
367 dev_err(di->dev,
368 "Chip ID %d not supported!\n", di->chip_id);
369 return -EINVAL;
370 }
371 di->slew_reg = FAN53555_CONTROL;
372 di->slew_mask = CTL_SLEW_MASK;
373 di->ramp_delay_table = slew_rates;
374 di->n_ramp_values = ARRAY_SIZE(slew_rates);
375 di->vsel_count = RK8602_NVOLTAGES;
376
377 return 0;
378 }
379
fan53555_voltages_setup_silergy(struct fan53555_device_info * di)380 static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
381 {
382 /* Init voltage range and step */
383 switch (di->chip_id) {
384 case SILERGY_SYR82X:
385 case SILERGY_SYR83X:
386 di->vsel_min = 712500;
387 di->vsel_step = 12500;
388 break;
389 default:
390 dev_err(di->dev,
391 "Chip ID %d not supported!\n", di->chip_id);
392 return -EINVAL;
393 }
394 di->slew_reg = FAN53555_CONTROL;
395 di->slew_mask = CTL_SLEW_MASK;
396 di->ramp_delay_table = slew_rates;
397 di->n_ramp_values = ARRAY_SIZE(slew_rates);
398 di->vsel_count = FAN53555_NVOLTAGES;
399
400 return 0;
401 }
402
fan53526_voltages_setup_tcs(struct fan53555_device_info * di)403 static int fan53526_voltages_setup_tcs(struct fan53555_device_info *di)
404 {
405 switch (di->chip_id) {
406 case TCS4525_CHIP_ID_12:
407 case TCS4526_CHIP_ID_00:
408 di->slew_reg = TCS4525_TIME;
409 di->slew_mask = TCS_SLEW_MASK;
410 di->ramp_delay_table = tcs_slew_rates;
411 di->n_ramp_values = ARRAY_SIZE(tcs_slew_rates);
412
413 /* Init voltage range and step */
414 di->vsel_min = 600000;
415 di->vsel_step = 6250;
416 di->vsel_count = FAN53526_NVOLTAGES;
417 break;
418 default:
419 dev_err(di->dev, "Chip ID %d not supported!\n", di->chip_id);
420 return -EINVAL;
421 }
422
423 return 0;
424 }
425
426 /* For 00,01,03,05 options:
427 * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
428 * For 04 option:
429 * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
430 * */
fan53555_device_setup(struct fan53555_device_info * di,struct fan53555_platform_data * pdata)431 static int fan53555_device_setup(struct fan53555_device_info *di,
432 struct fan53555_platform_data *pdata)
433 {
434 int ret = 0;
435
436 /* Setup voltage control register */
437 switch (di->vendor) {
438 case FAN53526_VENDOR_FAIRCHILD:
439 case FAN53555_VENDOR_FAIRCHILD:
440 case FAN53555_VENDOR_ROCKCHIP:
441 case FAN53555_VENDOR_SILERGY:
442 switch (pdata->sleep_vsel_id) {
443 case FAN53555_VSEL_ID_0:
444 di->sleep_reg = FAN53555_VSEL0;
445 di->vol_reg = FAN53555_VSEL1;
446 break;
447 case FAN53555_VSEL_ID_1:
448 di->sleep_reg = FAN53555_VSEL1;
449 di->vol_reg = FAN53555_VSEL0;
450 break;
451 default:
452 dev_err(di->dev, "Invalid VSEL ID!\n");
453 return -EINVAL;
454 }
455 di->sleep_en_reg = di->sleep_reg;
456 di->en_reg = di->vol_reg;
457 break;
458 case RK8602_VENDOR_ROCKCHIP:
459 switch (pdata->sleep_vsel_id) {
460 case FAN53555_VSEL_ID_0:
461 di->sleep_reg = RK8602_VSEL0;
462 di->vol_reg = RK8602_VSEL1;
463 di->sleep_en_reg = FAN53555_VSEL0;
464 di->en_reg = FAN53555_VSEL1;
465 break;
466 case FAN53555_VSEL_ID_1:
467 di->sleep_reg = RK8602_VSEL1;
468 di->vol_reg = RK8602_VSEL0;
469 di->sleep_en_reg = FAN53555_VSEL1;
470 di->en_reg = FAN53555_VSEL0;
471 break;
472 default:
473 dev_err(di->dev, "Invalid VSEL ID!\n");
474 return -EINVAL;
475 }
476 break;
477 case FAN53526_VENDOR_TCS:
478 switch (pdata->sleep_vsel_id) {
479 case FAN53555_VSEL_ID_0:
480 di->sleep_reg = TCS4525_VSEL0;
481 di->vol_reg = TCS4525_VSEL1;
482 break;
483 case FAN53555_VSEL_ID_1:
484 di->sleep_reg = TCS4525_VSEL1;
485 di->vol_reg = TCS4525_VSEL0;
486 break;
487 default:
488 dev_err(di->dev, "Invalid VSEL ID!\n");
489 return -EINVAL;
490 }
491 di->sleep_en_reg = di->sleep_reg;
492 di->en_reg = di->vol_reg;
493 break;
494 default:
495 dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
496 return -EINVAL;
497 }
498
499 /* Setup mode control register */
500 switch (di->vendor) {
501 case FAN53526_VENDOR_FAIRCHILD:
502 di->mode_reg = FAN53555_CONTROL;
503
504 switch (pdata->sleep_vsel_id) {
505 case FAN53555_VSEL_ID_0:
506 di->mode_mask = CTL_MODE_VSEL1_MODE;
507 break;
508 case FAN53555_VSEL_ID_1:
509 di->mode_mask = CTL_MODE_VSEL0_MODE;
510 break;
511 }
512 break;
513 case FAN53555_VENDOR_FAIRCHILD:
514 case FAN53555_VENDOR_ROCKCHIP:
515 case FAN53555_VENDOR_SILERGY:
516 di->mode_reg = di->vol_reg;
517 di->mode_mask = VSEL_MODE;
518 break;
519 case RK8602_VENDOR_ROCKCHIP:
520 di->mode_mask = VSEL_MODE;
521
522 switch (pdata->sleep_vsel_id) {
523 case FAN53555_VSEL_ID_0:
524 di->mode_reg = FAN53555_VSEL1;
525 break;
526 case FAN53555_VSEL_ID_1:
527 di->mode_reg = FAN53555_VSEL0;
528 break;
529 }
530 break;
531 case FAN53526_VENDOR_TCS:
532 di->mode_reg = TCS4525_COMMAND;
533
534 switch (pdata->sleep_vsel_id) {
535 case FAN53555_VSEL_ID_0:
536 di->mode_mask = TCS_VSEL1_MODE;
537 break;
538 case FAN53555_VSEL_ID_1:
539 di->mode_mask = TCS_VSEL0_MODE;
540 break;
541 }
542 break;
543 default:
544 dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
545 return -EINVAL;
546 }
547
548 /* Setup voltage range */
549 switch (di->vendor) {
550 case FAN53526_VENDOR_FAIRCHILD:
551 ret = fan53526_voltages_setup_fairchild(di);
552 break;
553 case FAN53555_VENDOR_FAIRCHILD:
554 ret = fan53555_voltages_setup_fairchild(di);
555 break;
556 case FAN53555_VENDOR_ROCKCHIP:
557 ret = fan53555_voltages_setup_rockchip(di);
558 break;
559 case RK8602_VENDOR_ROCKCHIP:
560 ret = rk8602_voltages_setup_rockchip(di);
561 break;
562 case FAN53555_VENDOR_SILERGY:
563 ret = fan53555_voltages_setup_silergy(di);
564 break;
565 case FAN53526_VENDOR_TCS:
566 ret = fan53526_voltages_setup_tcs(di);
567 break;
568 default:
569 dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
570 return -EINVAL;
571 }
572
573 return ret;
574 }
575
fan53555_regulator_register(struct fan53555_device_info * di,struct regulator_config * config)576 static int fan53555_regulator_register(struct fan53555_device_info *di,
577 struct regulator_config *config)
578 {
579 struct regulator_desc *rdesc = &di->desc;
580 struct regulator_dev *rdev;
581
582 rdesc->name = "fan53555-reg";
583 rdesc->supply_name = "vin";
584 rdesc->ops = &fan53555_regulator_ops;
585 rdesc->type = REGULATOR_VOLTAGE;
586 rdesc->n_voltages = di->vsel_count;
587 rdesc->enable_reg = di->en_reg;
588 rdesc->enable_mask = VSEL_BUCK_EN;
589 rdesc->min_uV = di->vsel_min;
590 rdesc->uV_step = di->vsel_step;
591 rdesc->vsel_reg = di->vol_reg;
592 rdesc->vsel_mask = BIT(fls(di->vsel_count - 1)) - 1;
593 rdesc->ramp_reg = di->slew_reg;
594 rdesc->ramp_mask = di->slew_mask;
595 rdesc->ramp_delay_table = di->ramp_delay_table;
596 rdesc->n_ramp_values = di->n_ramp_values;
597 rdesc->owner = THIS_MODULE;
598
599 rdev = devm_regulator_register(di->dev, &di->desc, config);
600 return PTR_ERR_OR_ZERO(rdev);
601 }
602
603 static const struct regmap_config fan53555_regmap_config = {
604 .reg_bits = 8,
605 .val_bits = 8,
606 };
607
fan53555_parse_dt(struct device * dev,struct device_node * np,const struct regulator_desc * desc)608 static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
609 struct device_node *np,
610 const struct regulator_desc *desc)
611 {
612 struct fan53555_platform_data *pdata;
613 int ret;
614 u32 tmp;
615
616 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
617 if (!pdata)
618 return NULL;
619
620 pdata->regulator = of_get_regulator_init_data(dev, np, desc);
621
622 ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
623 &tmp);
624 if (!ret)
625 pdata->sleep_vsel_id = tmp;
626
627 return pdata;
628 }
629
630 static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
631 {
632 .compatible = "fcs,fan53526",
633 .data = (void *)FAN53526_VENDOR_FAIRCHILD,
634 }, {
635 .compatible = "fcs,fan53555",
636 .data = (void *)FAN53555_VENDOR_FAIRCHILD
637 }, {
638 .compatible = "rockchip,rk8600",
639 .data = (void *)FAN53555_VENDOR_ROCKCHIP
640 }, {
641 .compatible = "rockchip,rk8602",
642 .data = (void *)RK8602_VENDOR_ROCKCHIP
643 }, {
644 .compatible = "silergy,syr827",
645 .data = (void *)FAN53555_VENDOR_SILERGY,
646 }, {
647 .compatible = "silergy,syr828",
648 .data = (void *)FAN53555_VENDOR_SILERGY,
649 }, {
650 .compatible = "tcs,tcs4525",
651 .data = (void *)FAN53526_VENDOR_TCS
652 }, {
653 .compatible = "tcs,tcs4526",
654 .data = (void *)FAN53526_VENDOR_TCS
655 },
656 { }
657 };
658 MODULE_DEVICE_TABLE(of, fan53555_dt_ids);
659
fan53555_regulator_probe(struct i2c_client * client)660 static int fan53555_regulator_probe(struct i2c_client *client)
661 {
662 const struct i2c_device_id *id = i2c_client_get_device_id(client);
663 struct device_node *np = client->dev.of_node;
664 struct fan53555_device_info *di;
665 struct fan53555_platform_data *pdata;
666 struct regulator_config config = { };
667 struct regmap *regmap;
668 unsigned int val;
669 int ret;
670
671 di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
672 GFP_KERNEL);
673 if (!di)
674 return -ENOMEM;
675
676 pdata = dev_get_platdata(&client->dev);
677 if (!pdata)
678 pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
679
680 if (!pdata || !pdata->regulator)
681 return dev_err_probe(&client->dev, -ENODEV,
682 "Platform data not found!\n");
683
684 di->regulator = pdata->regulator;
685 if (client->dev.of_node) {
686 di->vendor =
687 (unsigned long)of_device_get_match_data(&client->dev);
688 } else {
689 /* if no ramp constraint set, get the pdata ramp_delay */
690 if (!di->regulator->constraints.ramp_delay) {
691 if (pdata->slew_rate >= ARRAY_SIZE(slew_rates))
692 return dev_err_probe(&client->dev, -EINVAL,
693 "Invalid slew_rate\n");
694
695 di->regulator->constraints.ramp_delay
696 = slew_rates[pdata->slew_rate];
697 }
698
699 di->vendor = id->driver_data;
700 }
701
702 regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
703 if (IS_ERR(regmap))
704 return dev_err_probe(&client->dev, PTR_ERR(regmap),
705 "Failed to allocate regmap!\n");
706
707 di->dev = &client->dev;
708 i2c_set_clientdata(client, di);
709 /* Get chip ID */
710 ret = regmap_read(regmap, FAN53555_ID1, &val);
711 if (ret < 0)
712 return dev_err_probe(&client->dev, ret, "Failed to get chip ID!\n");
713
714 di->chip_id = val & DIE_ID;
715 /* Get chip revision */
716 ret = regmap_read(regmap, FAN53555_ID2, &val);
717 if (ret < 0)
718 return dev_err_probe(&client->dev, ret, "Failed to get chip Rev!\n");
719
720 di->chip_rev = val & DIE_REV;
721 dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
722 di->chip_id, di->chip_rev);
723 /* Device init */
724 ret = fan53555_device_setup(di, pdata);
725 if (ret < 0)
726 return dev_err_probe(&client->dev, ret, "Failed to setup device!\n");
727
728 /* Register regulator */
729 config.dev = di->dev;
730 config.init_data = di->regulator;
731 config.regmap = regmap;
732 config.driver_data = di;
733 config.of_node = np;
734
735 ret = fan53555_regulator_register(di, &config);
736 if (ret < 0)
737 dev_err_probe(&client->dev, ret, "Failed to register regulator!\n");
738
739 return ret;
740 }
741
742 static const struct i2c_device_id fan53555_id[] = {
743 {
744 .name = "fan53526",
745 .driver_data = FAN53526_VENDOR_FAIRCHILD
746 }, {
747 .name = "fan53555",
748 .driver_data = FAN53555_VENDOR_FAIRCHILD
749 }, {
750 .name = "rk8600",
751 .driver_data = FAN53555_VENDOR_ROCKCHIP
752 }, {
753 .name = "rk8602",
754 .driver_data = RK8602_VENDOR_ROCKCHIP
755 }, {
756 .name = "syr827",
757 .driver_data = FAN53555_VENDOR_SILERGY
758 }, {
759 .name = "syr828",
760 .driver_data = FAN53555_VENDOR_SILERGY
761 }, {
762 .name = "tcs4525",
763 .driver_data = FAN53526_VENDOR_TCS
764 }, {
765 .name = "tcs4526",
766 .driver_data = FAN53526_VENDOR_TCS
767 },
768 { },
769 };
770 MODULE_DEVICE_TABLE(i2c, fan53555_id);
771
772 static struct i2c_driver fan53555_regulator_driver = {
773 .driver = {
774 .name = "fan53555-regulator",
775 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
776 .of_match_table = of_match_ptr(fan53555_dt_ids),
777 },
778 .probe = fan53555_regulator_probe,
779 .id_table = fan53555_id,
780 };
781
782 module_i2c_driver(fan53555_regulator_driver);
783
784 MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
785 MODULE_DESCRIPTION("FAN53555 regulator driver");
786 MODULE_LICENSE("GPL v2");
787