xref: /openbmc/u-boot/include/usb/fotg210.h (revision e8f80a5a)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Faraday USB 2.0 OTG Controller
4  *
5  * (C) Copyright 2010 Faraday Technology
6  * Dante Su <dantesu@faraday-tech.com>
7  */
8 
9 #ifndef _FOTG210_H
10 #define _FOTG210_H
11 
12 struct fotg210_regs {
13 	/* USB Host Controller */
14 	struct {
15 		uint32_t data[4];
16 	} hccr;			/* 0x00 - 0x0f: hccr */
17 	struct {
18 		uint32_t data[9];
19 	} hcor;			/* 0x10 - 0x33: hcor */
20 	uint32_t rsvd1[3];
21 	uint32_t miscr;	/* 0x40: Miscellaneous Register */
22 	uint32_t rsvd2[15];
23 	/* USB OTG Controller */
24 	uint32_t otgcsr;/* 0x80: OTG Control Status Register */
25 	uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
26 	uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
27 	uint32_t rsvd3[13];
28 	uint32_t isr;	/* 0xC0: Global Interrupt Status Register */
29 	uint32_t imr;	/* 0xC4: Global Interrupt Mask Register */
30 	uint32_t rsvd4[14];
31 	/* USB Device Controller */
32 	uint32_t dev_ctrl;/* 0x100: Device Control Register */
33 	uint32_t dev_addr;/* 0x104: Device Address Register */
34 	uint32_t dev_test;/* 0x108: Device Test Register */
35 	uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
36 	uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
37 	uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
38 	uint32_t rsvd5[2];
39 	uint32_t cxfifo;/* 0x120: CX FIFO Register */
40 	uint32_t idle;	/* 0x124: IDLE Counter Register */
41 	uint32_t rsvd6[2];
42 	uint32_t gimr;	/* 0x130: Group Interrupt Mask Register */
43 	uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
44 	uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
45 	uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
46 	uint32_t gisr;	/* 0x140: Group Interrupt Status Register */
47 	uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
48 	uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
49 	uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
50 	uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
51 	uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
52 	uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
53 	uint32_t rsvd7[1];
54 	uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
55 	uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
56 	uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
57 	uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
58 	uint32_t fifomap;/* 0x1a8: FIFO Map Register */
59 	uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
60 	uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
61 	uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
62 	uint32_t rsvd8[1];
63 	uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
64 	uint32_t dma_addr; /* 0x1cc: DMA Address Register */
65 	uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
66 };
67 
68 /* Miscellaneous Register */
69 #define MISCR_SUSPEND  (1 << 6) /* Put transceiver in suspend mode */
70 #define MISCR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
71 #define MISCR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
72 #define MISCR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
73 
74 /* OTG Control Status Register */
75 #define OTGCSR_SPD_HIGH     (2 << 22) /* Speed of the attached device (host) */
76 #define OTGCSR_SPD_LOW      (1 << 22)
77 #define OTGCSR_SPD_FULL     (0 << 22)
78 #define OTGCSR_SPD_MASK     (3 << 22)
79 #define OTGCSR_SPD_SHIFT    22
80 #define OTGCSR_SPD(x)       (((x) >> 22) & 0x03)
81 #define OTGCSR_DEV_A        (0 << 21) /* Acts as A-device */
82 #define OTGCSR_DEV_B        (1 << 21) /* Acts as B-device */
83 #define OTGCSR_ROLE_H       (0 << 20) /* Acts as Host */
84 #define OTGCSR_ROLE_D       (1 << 20) /* Acts as Device */
85 #define OTGCSR_A_VBUS_VLD   (1 << 19) /* A-device VBUS Valid */
86 #define OTGCSR_A_SESS_VLD   (1 << 18) /* A-device Session Valid */
87 #define OTGCSR_B_SESS_VLD   (1 << 17) /* B-device Session Valid */
88 #define OTGCSR_B_SESS_END   (1 << 16) /* B-device Session End */
89 #define OTGCSR_HFT_LONG     (1 << 11) /* HDISCON noise filter = 270 us*/
90 #define OTGCSR_HFT          (0 << 11) /* HDISCON noise filter = 135 us*/
91 #define OTGCSR_VFT_LONG     (1 << 10) /* VBUS noise filter = 472 us*/
92 #define OTGCSR_VFT          (0 << 10) /* VBUS noise filter = 135 us*/
93 #define OTGCSR_IDFT_LONG    (1 << 9)  /* ID noise filter = 4 ms*/
94 #define OTGCSR_IDFT         (0 << 9)  /* ID noise filter = 3 ms*/
95 #define OTGCSR_A_SRPR_VBUS  (0 << 8)  /* A-device: SRP responds to VBUS */
96 #define OTGCSR_A_SRPR_DATA  (1 << 8)  /* A-device: SRP responds to DATA-LINE */
97 #define OTGCSR_A_SRP_EN     (1 << 7)  /* A-device SRP detection enabled */
98 #define OTGCSR_A_HNP        (1 << 6)  /* Set role=A-device with HNP enabled */
99 #define OTGCSR_A_BUSDROP    (1 << 5)  /* A-device drop bus (power-down) */
100 #define OTGCSR_A_BUSREQ     (1 << 4)  /* A-device request bus */
101 #define OTGCSR_B_VBUS_DISC  (1 << 2)  /* B-device discharges VBUS */
102 #define OTGCSR_B_HNP        (1 << 1)  /* B-device enable HNP */
103 #define OTGCSR_B_BUSREQ     (1 << 0)  /* B-device request bus */
104 
105 /* OTG Interrupt Status Register */
106 #define OTGISR_APRM         (1 << 12) /* Mini-A plug removed */
107 #define OTGISR_BPRM         (1 << 11) /* Mini-B plug removed */
108 #define OTGISR_OVD          (1 << 10) /* over-current detected */
109 #define OTGISR_IDCHG        (1 << 9)  /* ID(A/B) changed */
110 #define OTGISR_RLCHG        (1 << 8)  /* Role(Host/Device) changed */
111 #define OTGISR_BSESSEND     (1 << 6)  /* B-device Session End */
112 #define OTGISR_AVBUSERR     (1 << 5)  /* A-device VBUS Error */
113 #define OTGISR_ASRP         (1 << 4)  /* A-device SRP detected */
114 #define OTGISR_BSRP         (1 << 0)  /* B-device SRP complete */
115 
116 /* OTG Interrupt Enable Register */
117 #define OTGIER_APRM         (1 << 12) /* Mini-A plug removed */
118 #define OTGIER_BPRM         (1 << 11) /* Mini-B plug removed */
119 #define OTGIER_OVD          (1 << 10) /* over-current detected */
120 #define OTGIER_IDCHG        (1 << 9)  /* ID(A/B) changed */
121 #define OTGIER_RLCHG        (1 << 8)  /* Role(Host/Device) changed */
122 #define OTGIER_BSESSEND     (1 << 6)  /* B-device Session End */
123 #define OTGIER_AVBUSERR     (1 << 5)  /* A-device VBUS Error */
124 #define OTGIER_ASRP         (1 << 4)  /* A-device SRP detected */
125 #define OTGIER_BSRP         (1 << 0)  /* B-device SRP complete */
126 
127 /* Global Interrupt Status Register (W1C) */
128 #define ISR_HOST            (1 << 2)  /* USB Host interrupt */
129 #define ISR_OTG             (1 << 1)  /* USB OTG interrupt */
130 #define ISR_DEV             (1 << 0)  /* USB Device interrupt */
131 #define ISR_MASK            0x07
132 
133 /* Global Interrupt Mask Register */
134 #define IMR_IRQLH           (1 << 3)  /* Interrupt triggered at level-high */
135 #define IMR_IRQLL           (0 << 3)  /* Interrupt triggered at level-low */
136 #define IMR_HOST            (1 << 2)  /* USB Host interrupt */
137 #define IMR_OTG             (1 << 1)  /* USB OTG interrupt */
138 #define IMR_DEV             (1 << 0)  /* USB Device interrupt */
139 #define IMR_MASK            0x0f
140 
141 /* Device Control Register */
142 #define DEVCTRL_FS_FORCED   (1 << 9)  /* Forced to be Full-Speed Mode */
143 #define DEVCTRL_HS          (1 << 6)  /* High Speed Mode */
144 #define DEVCTRL_FS          (0 << 6)  /* Full Speed Mode */
145 #define DEVCTRL_EN          (1 << 5)  /* Chip Enable */
146 #define DEVCTRL_RESET       (1 << 4)  /* Chip Software Reset */
147 #define DEVCTRL_SUSPEND     (1 << 3)  /* Enter Suspend Mode */
148 #define DEVCTRL_GIRQ_EN     (1 << 2)  /* Global Interrupt Enabled */
149 #define DEVCTRL_HALFSPD     (1 << 1)  /* Half speed mode for FPGA test */
150 #define DEVCTRL_RWAKEUP     (1 << 0)  /* Enable remote wake-up */
151 
152 /* Device Address Register */
153 #define DEVADDR_CONF        (1 << 7)  /* SET_CONFIGURATION has been executed */
154 #define DEVADDR_ADDR(x)     ((x) & 0x7f)
155 #define DEVADDR_ADDR_MASK   0x7f
156 
157 /* Device Test Register */
158 #define DEVTEST_NOSOF       (1 << 6)  /* Do not generate SOF */
159 #define DEVTEST_TST_MODE    (1 << 5)  /* Enter Test Mode */
160 #define DEVTEST_TST_NOTS    (1 << 4)  /* Do not toggle sequence */
161 #define DEVTEST_TST_NOCRC   (1 << 3)  /* Do not append CRC */
162 #define DEVTEST_TST_CLREA   (1 << 2)  /* Clear External Side Address */
163 #define DEVTEST_TST_CXLP    (1 << 1)  /* EP0 loopback test */
164 #define DEVTEST_TST_CLRFF   (1 << 0)  /* Clear FIFO */
165 
166 /* SOF Frame Number Register */
167 #define SOFFNR_UFN(x)       (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
168 #define SOFFNR_FNR(x)       ((x) & 0x7ff) /* SOF Frame Number */
169 
170 /* SOF Mask Timer Register */
171 #define SOFMTR_TMR(x)       ((x) & 0xffff)
172 
173 /* PHY Test Mode Selector Register */
174 #define PHYTMSR_TST_PKT     (1 << 4) /* Packet send test */
175 #define PHYTMSR_TST_SE0NAK  (1 << 3) /* High-Speed quiescent state */
176 #define PHYTMSR_TST_KSTA    (1 << 2) /* High-Speed K state */
177 #define PHYTMSR_TST_JSTA    (1 << 1) /* High-Speed J state */
178 #define PHYTMSR_UNPLUG      (1 << 0) /* Enable soft-detachment */
179 
180 /* CX FIFO Register */
181 #define CXFIFO_BYTES(x)     (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
182 #define CXFIFO_FIFOE(x)     (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
183 #define CXFIFO_FIFOE_FIFO0  (1 << 8)
184 #define CXFIFO_FIFOE_FIFO1  (1 << 9)
185 #define CXFIFO_FIFOE_FIFO2  (1 << 10)
186 #define CXFIFO_FIFOE_FIFO3  (1 << 11)
187 #define CXFIFO_FIFOE_MASK   (0x0f << 8)
188 #define CXFIFO_CXFIFOE      (1 << 5) /* CX FIFO empty */
189 #define CXFIFO_CXFIFOF      (1 << 4) /* CX FIFO full */
190 #define CXFIFO_CXFIFOCLR    (1 << 3) /* CX FIFO clear */
191 #define CXFIFO_CXSTALL      (1 << 2) /* CX Stall */
192 #define CXFIFO_TSTPKTFIN    (1 << 1) /* Test packet data transfer finished */
193 #define CXFIFO_CXFIN        (1 << 0) /* CX data transfer finished */
194 
195 /* IDLE Counter Register */
196 #define IDLE_MS(x)          ((x) & 0x07) /* PHY suspend delay = x ms */
197 
198 /* Group Interrupt Mask(Disable) Register */
199 #define GIMR_GRP2           (1 << 2) /* Disable interrupt group 2 */
200 #define GIMR_GRP1           (1 << 1) /* Disable interrupt group 1 */
201 #define GIMR_GRP0           (1 << 0) /* Disable interrupt group 0 */
202 #define GIMR_MASK           0x07
203 
204 /* Group Interrupt Mask(Disable) Register 0 (CX) */
205 #define GIMR0_CXABORT       (1 << 5) /* CX command abort interrupt */
206 #define GIMR0_CXERR         (1 << 4) /* CX command error interrupt */
207 #define GIMR0_CXEND         (1 << 3) /* CX command end interrupt */
208 #define GIMR0_CXOUT         (1 << 2) /* EP0-OUT packet interrupt */
209 #define GIMR0_CXIN          (1 << 1) /* EP0-IN packet interrupt */
210 #define GIMR0_CXSETUP       (1 << 0) /* EP0-SETUP packet interrupt */
211 #define GIMR0_MASK          0x3f
212 
213 /* Group Interrupt Mask(Disable) Register 1 (FIFO) */
214 #define GIMR1_FIFO_IN(x)    (1 << (((x) & 3) + 16))    /* FIFOx IN */
215 #define GIMR1_FIFO_TX(x)    GIMR1_FIFO_IN(x)
216 #define GIMR1_FIFO_OUT(x)   (1 << (((x) & 3) * 2))     /* FIFOx OUT */
217 #define GIMR1_FIFO_SPK(x)   (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
218 #define GIMR1_FIFO_RX(x)    (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
219 #define GIMR1_MASK          0xf00ff
220 
221 /* Group Interrupt Mask(Disable) Register 2 (Device) */
222 #define GIMR2_WAKEUP        (1 << 10) /* Device waked up */
223 #define GIMR2_IDLE          (1 << 9)  /* Device idle */
224 #define GIMR2_DMAERR        (1 << 8)  /* DMA error */
225 #define GIMR2_DMAFIN        (1 << 7)  /* DMA finished */
226 #define GIMR2_ZLPRX         (1 << 6)  /* Zero-Length-Packet Rx Interrupt */
227 #define GIMR2_ZLPTX         (1 << 5)  /* Zero-Length-Packet Tx Interrupt */
228 #define GIMR2_ISOCABT       (1 << 4)  /* ISOC Abort Interrupt */
229 #define GIMR2_ISOCERR       (1 << 3)  /* ISOC Error Interrupt */
230 #define GIMR2_RESUME        (1 << 2)  /* Resume state change Interrupt */
231 #define GIMR2_SUSPEND       (1 << 1)  /* Suspend state change Interrupt */
232 #define GIMR2_RESET         (1 << 0)  /* Reset Interrupt */
233 #define GIMR2_MASK          0x7ff
234 
235 /* Group Interrupt Status Register */
236 #define GISR_GRP2           (1 << 2) /* Interrupt group 2 */
237 #define GISR_GRP1           (1 << 1) /* Interrupt group 1 */
238 #define GISR_GRP0           (1 << 0) /* Interrupt group 0 */
239 
240 /* Group Interrupt Status Register 0 (CX) */
241 #define GISR0_CXABORT       (1 << 5) /* CX command abort interrupt */
242 #define GISR0_CXERR         (1 << 4) /* CX command error interrupt */
243 #define GISR0_CXEND         (1 << 3) /* CX command end interrupt */
244 #define GISR0_CXOUT         (1 << 2) /* EP0-OUT packet interrupt */
245 #define GISR0_CXIN          (1 << 1) /* EP0-IN packet interrupt */
246 #define GISR0_CXSETUP       (1 << 0) /* EP0-SETUP packet interrupt */
247 
248 /* Group Interrupt Status Register 1 (FIFO) */
249 #define GISR1_IN_FIFO(x)    (1 << (((x) & 0x03) + 16))    /* FIFOx IN */
250 #define GISR1_OUT_FIFO(x)   (1 << (((x) & 0x03) * 2))     /* FIFOx OUT */
251 #define GISR1_SPK_FIFO(x)   (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
252 #define GISR1_RX_FIFO(x)    (3 << (((x) & 0x03) * 2))     /* FIFOx OUT/SPK */
253 
254 /* Group Interrupt Status Register 2 (Device) */
255 #define GISR2_WAKEUP        (1 << 10) /* Device waked up */
256 #define GISR2_IDLE          (1 << 9)  /* Device idle */
257 #define GISR2_DMAERR        (1 << 8)  /* DMA error */
258 #define GISR2_DMAFIN        (1 << 7)  /* DMA finished */
259 #define GISR2_ZLPRX         (1 << 6)  /* Zero-Length-Packet Rx Interrupt */
260 #define GISR2_ZLPTX         (1 << 5)  /* Zero-Length-Packet Tx Interrupt */
261 #define GISR2_ISOCABT       (1 << 4)  /* ISOC Abort Interrupt */
262 #define GISR2_ISOCERR       (1 << 3)  /* ISOC Error Interrupt */
263 #define GISR2_RESUME        (1 << 2)  /* Resume state change Interrupt */
264 #define GISR2_SUSPEND       (1 << 1)  /* Suspend state change Interrupt */
265 #define GISR2_RESET         (1 << 0)  /* Reset Interrupt */
266 
267 /* Receive Zero-Length-Packet Register */
268 #define RXZLP_EP(x)         (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
269 
270 /* Transfer Zero-Length-Packet Register */
271 #define TXZLP_EP(x)         (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
272 
273 /* ISOC Error/Abort Status Register */
274 #define ISOEASR_EP(x)       (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
275 
276 /* IN Endpoint Register */
277 #define IEP_SENDZLP         (1 << 15)     /* Send Zero-Length-Packet */
278 #define IEP_TNRHB(x)        (((x) & 0x03) << 13) \
279 	/* Transaction Number for High-Bandwidth EP(ISOC) */
280 #define IEP_RESET           (1 << 12)     /* Reset Toggle Sequence */
281 #define IEP_STALL           (1 << 11)     /* Stall */
282 #define IEP_MAXPS(x)        ((x) & 0x7ff) /* Max. packet size */
283 
284 /* OUT Endpoint Register */
285 #define OEP_RESET           (1 << 12)     /* Reset Toggle Sequence */
286 #define OEP_STALL           (1 << 11)     /* Stall */
287 #define OEP_MAXPS(x)        ((x) & 0x7ff) /* Max. packet size */
288 
289 /* Endpoint Map Register (EP1 ~ EP4) */
290 #define EPMAP14_SET_IN(ep, fifo) \
291 	((fifo) & 3) << (((ep) - 1) << 3 + 0)
292 #define EPMAP14_SET_OUT(ep, fifo) \
293 	((fifo) & 3) << (((ep) - 1) << 3 + 4)
294 #define EPMAP14_SET(ep, in, out) \
295 	do { \
296 		EPMAP14_SET_IN(ep, in); \
297 		EPMAP14_SET_OUT(ep, out); \
298 	} while (0)
299 
300 #define EPMAP14_DEFAULT     0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
301 
302 /* Endpoint Map Register (EP5 ~ EP8) */
303 #define EPMAP58_SET_IN(ep, fifo) \
304 	((fifo) & 3) << (((ep) - 5) << 3 + 0)
305 #define EPMAP58_SET_OUT(ep, fifo) \
306 	((fifo) & 3) << (((ep) - 5) << 3 + 4)
307 #define EPMAP58_SET(ep, in, out) \
308 	do { \
309 		EPMAP58_SET_IN(ep, in); \
310 		EPMAP58_SET_OUT(ep, out); \
311 	} while (0)
312 
313 #define EPMAP58_DEFAULT     0x00000000 /* All EPx->FIFO0 */
314 
315 /* FIFO Map Register */
316 #define FIFOMAP_BIDIR       (2 << 4)
317 #define FIFOMAP_IN          (1 << 4)
318 #define FIFOMAP_OUT         (0 << 4)
319 #define FIFOMAP_DIR_MASK    0x30
320 #define FIFOMAP_EP(x)       ((x) & 0x0f)
321 #define FIFOMAP_EP_MASK     0x0f
322 #define FIFOMAP_CFG_MASK    0x3f
323 #define FIFOMAP_DEFAULT     0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
324 #define FIFOMAP(fifo, cfg)  (((cfg) & 0x3f) << (((fifo) & 3) << 3))
325 
326 /* FIFO Configuration Register */
327 #define FIFOCFG_EN          (1 << 5)
328 #define FIFOCFG_BLKSZ_1024  (1 << 4)
329 #define FIFOCFG_BLKSZ_512   (0 << 4)
330 #define FIFOCFG_3BLK        (2 << 2)
331 #define FIFOCFG_2BLK        (1 << 2)
332 #define FIFOCFG_1BLK        (0 << 2)
333 #define FIFOCFG_NBLK_MASK   3
334 #define FIFOCFG_NBLK_SHIFT  2
335 #define FIFOCFG_INTR        (3 << 0)
336 #define FIFOCFG_BULK        (2 << 0)
337 #define FIFOCFG_ISOC        (1 << 0)
338 #define FIFOCFG_RSVD        (0 << 0)  /* Reserved */
339 #define FIFOCFG_TYPE_MASK   3
340 #define FIFOCFG_TYPE_SHIFT  0
341 #define FIFOCFG_CFG_MASK    0x3f
342 #define FIFOCFG(fifo, cfg)  (((cfg) & 0x3f) << (((fifo) & 3) << 3))
343 
344 /* FIFO Control Status Register */
345 #define FIFOCSR_RESET       (1 << 12) /* FIFO Reset */
346 #define FIFOCSR_BYTES(x)    ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
347 
348 /* DMA Target FIFO Register */
349 #define DMAFIFO_CX          (1 << 4) /* DMA FIFO = CX FIFO */
350 #define DMAFIFO_FIFO(x)     (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
351 
352 /* DMA Control Register */
353 #define DMACTRL_LEN(x)      (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
354 #define DMACTRL_LEN_SHIFT   8
355 #define DMACTRL_CLRFF       (1 << 4) /* Clear FIFO upon DMA abort */
356 #define DMACTRL_ABORT       (1 << 3) /* DMA abort */
357 #define DMACTRL_IO2IO       (1 << 2) /* IO to IO */
358 #define DMACTRL_FIFO2MEM    (0 << 1) /* FIFO to Memory */
359 #define DMACTRL_MEM2FIFO    (1 << 1) /* Memory to FIFO */
360 #define DMACTRL_START       (1 << 0) /* DMA start */
361 
362 #endif
363