1 /*=======================================================/ 2 Header file for nsp_cs.c 3 By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> 4 5 Ver.1.0 : Cut unused lines. 6 Ver 0.1 : Initial version. 7 8 This software may be used and distributed according to the terms of 9 the GNU General Public License. 10 11 =========================================================*/ 12 13 #ifndef __nsp_cs__ 14 #define __nsp_cs__ 15 16 /* for debugging */ 17 //#define NSP_DEBUG 9 18 19 /* 20 #define static 21 #define inline 22 */ 23 24 /************************************ 25 * Some useful macros... 26 */ 27 28 /* SCSI initiator must be ID 7 */ 29 #define NSP_INITIATOR_ID 7 30 31 #define NSP_SELTIMEOUT 200 32 33 /*************************************************************************** 34 * register definitions 35 ***************************************************************************/ 36 /*======================================================================== 37 * base register 38 ========================================================================*/ 39 #define IRQCONTROL 0x00 /* R */ 40 # define IRQCONTROL_RESELECT_CLEAR BIT(0) 41 # define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1) 42 # define IRQCONTROL_TIMER_CLEAR BIT(2) 43 # define IRQCONTROL_FIFO_CLEAR BIT(3) 44 # define IRQCONTROL_ALLMASK 0xff 45 # define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \ 46 IRQCONTROL_PHASE_CHANGE_CLEAR | \ 47 IRQCONTROL_TIMER_CLEAR | \ 48 IRQCONTROL_FIFO_CLEAR ) 49 # define IRQCONTROL_IRQDISABLE 0xf0 50 51 #define IRQSTATUS 0x00 /* W */ 52 # define IRQSTATUS_SCSI BIT(0) 53 # define IRQSTATUS_TIMER BIT(2) 54 # define IRQSTATUS_FIFO BIT(3) 55 # define IRQSTATUS_MASK 0x0f 56 57 #define IFSELECT 0x01 /* W */ 58 # define IF_IFSEL BIT(0) 59 # define IF_REGSEL BIT(2) 60 61 #define FIFOSTATUS 0x01 /* R */ 62 # define FIFOSTATUS_CHIP_REVISION_MASK 0x0f 63 # define FIFOSTATUS_CHIP_ID_MASK 0x70 64 # define FIFOSTATUS_FULL_EMPTY BIT(7) 65 66 #define INDEXREG 0x02 /* R/W */ 67 #define DATAREG 0x03 /* R/W */ 68 #define FIFODATA 0x04 /* R/W */ 69 #define FIFODATA1 0x05 /* R/W */ 70 #define FIFODATA2 0x06 /* R/W */ 71 #define FIFODATA3 0x07 /* R/W */ 72 73 /*==================================================================== 74 * indexed register 75 ====================================================================*/ 76 #define EXTBUSCTRL 0x10 /* R/W,deleted */ 77 78 #define CLOCKDIV 0x11 /* R/W */ 79 # define CLOCK_40M 0x02 80 # define CLOCK_20M 0x01 81 # define FAST_20 BIT(2) 82 83 #define TERMPWRCTRL 0x13 /* R/W */ 84 # define POWER_ON BIT(0) 85 86 #define SCSIIRQMODE 0x15 /* R/W */ 87 # define SCSI_PHASE_CHANGE_EI BIT(0) 88 # define RESELECT_EI BIT(4) 89 # define FIFO_IRQ_EI BIT(5) 90 # define SCSI_RESET_IRQ_EI BIT(6) 91 92 #define IRQPHASESENCE 0x16 /* R */ 93 # define LATCHED_MSG BIT(0) 94 # define LATCHED_IO BIT(1) 95 # define LATCHED_CD BIT(2) 96 # define LATCHED_BUS_FREE BIT(3) 97 # define PHASE_CHANGE_IRQ BIT(4) 98 # define RESELECT_IRQ BIT(5) 99 # define FIFO_IRQ BIT(6) 100 # define SCSI_RESET_IRQ BIT(7) 101 102 #define TIMERCOUNT 0x17 /* R/W */ 103 104 #define SCSIBUSCTRL 0x18 /* R/W */ 105 # define SCSI_SEL BIT(0) 106 # define SCSI_RST BIT(1) 107 # define SCSI_DATAOUT_ENB BIT(2) 108 # define SCSI_ATN BIT(3) 109 # define SCSI_ACK BIT(4) 110 # define SCSI_BSY BIT(5) 111 # define AUTODIRECTION BIT(6) 112 # define ACKENB BIT(7) 113 114 #define SCSIBUSMON 0x19 /* R */ 115 116 #define SETARBIT 0x1A /* W */ 117 # define ARBIT_GO BIT(0) 118 # define ARBIT_FLAG_CLEAR BIT(1) 119 120 #define ARBITSTATUS 0x1A /* R */ 121 /*# define ARBIT_GO BIT(0)*/ 122 # define ARBIT_WIN BIT(1) 123 # define ARBIT_FAIL BIT(2) 124 # define RESELECT_FLAG BIT(3) 125 126 #define PARITYCTRL 0x1B /* W */ 127 #define PARITYSTATUS 0x1B /* R */ 128 129 #define COMMANDCTRL 0x1C /* W */ 130 # define CLEAR_COMMAND_POINTER BIT(0) 131 # define AUTO_COMMAND_GO BIT(1) 132 133 #define RESELECTID 0x1C /* R */ 134 #define COMMANDDATA 0x1D /* R/W */ 135 136 #define POINTERCLR 0x1E /* W */ 137 # define POINTER_CLEAR BIT(0) 138 # define ACK_COUNTER_CLEAR BIT(1) 139 # define REQ_COUNTER_CLEAR BIT(2) 140 # define HOST_COUNTER_CLEAR BIT(3) 141 # define READ_SOURCE (BIT(4) | BIT(5)) 142 # define ACK_COUNTER (0) 143 # define REQ_COUNTER (BIT(4)) 144 # define HOST_COUNTER (BIT(5)) 145 146 #define TRANSFERCOUNT 0x1E /* R */ 147 148 #define TRANSFERMODE 0x20 /* R/W */ 149 # define MODE_MEM8 BIT(0) 150 # define MODE_MEM32 BIT(1) 151 # define MODE_ADR24 BIT(2) 152 # define MODE_ADR32 BIT(3) 153 # define MODE_IO8 BIT(4) 154 # define MODE_IO32 BIT(5) 155 # define TRANSFER_GO BIT(6) 156 # define BRAIND BIT(7) 157 158 #define SYNCREG 0x21 /* R/W */ 159 # define SYNCREG_OFFSET_MASK 0x0f 160 # define SYNCREG_PERIOD_MASK 0xf0 161 # define SYNCREG_PERIOD_SHIFT 4 162 163 #define SCSIDATALATCH 0x22 /* W */ 164 #define SCSIDATAIN 0x22 /* R */ 165 #define SCSIDATAWITHACK 0x23 /* R/W */ 166 #define SCAMCONTROL 0x24 /* W */ 167 #define SCAMSTATUS 0x24 /* R */ 168 #define SCAMDATA 0x25 /* R/W */ 169 170 #define OTHERCONTROL 0x26 /* R/W */ 171 # define TPL_ROM_WRITE_EN BIT(0) 172 # define TPWR_OUT BIT(1) 173 # define TPWR_SENSE BIT(2) 174 # define RA8_CONTROL BIT(3) 175 176 #define ACKWIDTH 0x27 /* R/W */ 177 #define CLRTESTPNT 0x28 /* W */ 178 #define ACKCNTLD 0x29 /* W */ 179 #define REQCNTLD 0x2A /* W */ 180 #define HSTCNTLD 0x2B /* W */ 181 #define CHECKSUM 0x2C /* R/W */ 182 183 /************************************************************************ 184 * Input status bit definitions. 185 ************************************************************************/ 186 #define S_MESSAGE BIT(0) /* Message line from SCSI bus */ 187 #define S_IO BIT(1) /* Input/Output line from SCSI bus */ 188 #define S_CD BIT(2) /* Command/Data line from SCSI bus */ 189 #define S_BUSY BIT(3) /* Busy line from SCSI bus */ 190 #define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ 191 #define S_REQUEST BIT(5) /* Request line from SCSI bus */ 192 #define S_SELECT BIT(6) /* */ 193 #define S_ATN BIT(7) /* */ 194 195 /*********************************************************************** 196 * Useful Bus Monitor status combinations. 197 ***********************************************************************/ 198 #define BUSMON_SEL S_SELECT 199 #define BUSMON_BSY S_BUSY 200 #define BUSMON_REQ S_REQUEST 201 #define BUSMON_IO S_IO 202 #define BUSMON_ACK S_ACK 203 #define BUSMON_BUS_FREE 0 204 #define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST ) 205 #define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST ) 206 #define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST ) 207 #define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST ) 208 #define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST ) 209 #define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST ) 210 #define BUSMON_SELECT ( S_IO | S_SELECT ) 211 #define BUSMON_RESELECT ( S_IO | S_SELECT ) 212 #define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT ) 213 214 #define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK ) 215 #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) 216 #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) 217 #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) 218 #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) 219 #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) 220 #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) 221 222 /*====================================================================*/ 223 224 typedef struct scsi_info_t { 225 struct pcmcia_device *p_dev; 226 struct Scsi_Host *host; 227 int stop; 228 } scsi_info_t; 229 230 231 /* synchronous transfer negotiation data */ 232 typedef struct _sync_data { 233 unsigned int SyncNegotiation; 234 #define SYNC_NOT_YET 0 235 #define SYNC_OK 1 236 #define SYNC_NG 2 237 238 unsigned int SyncPeriod; 239 unsigned int SyncOffset; 240 unsigned char SyncRegister; 241 unsigned char AckWidth; 242 } sync_data; 243 244 typedef struct _nsp_hw_data { 245 unsigned int BaseAddress; 246 unsigned int NumAddress; 247 unsigned int IrqNumber; 248 249 unsigned long MmioAddress; 250 #define NSP_MMIO_OFFSET 0x0800 251 unsigned long MmioLength; 252 253 unsigned char ScsiClockDiv; 254 255 unsigned char TransferMode; 256 257 int TimerCount; 258 int SelectionTimeOut; 259 struct scsi_cmnd *CurrentSC; 260 //int CurrnetTarget; 261 262 int FifoCount; 263 264 #define MSGBUF_SIZE 20 265 unsigned char MsgBuffer[MSGBUF_SIZE]; 266 int MsgLen; 267 268 #define N_TARGET 8 269 sync_data Sync[N_TARGET]; 270 271 char nspinfo[110]; /* description */ 272 spinlock_t Lock; 273 274 scsi_info_t *ScsiInfo; /* attach <-> detect glue */ 275 276 277 #ifdef NSP_DEBUG 278 int CmdId; /* Accepted command serial number. 279 Used for debugging. */ 280 #endif 281 } nsp_hw_data; 282 283 /**************************************************************************** 284 * 285 */ 286 287 /* Card service functions */ 288 static void nsp_cs_detach (struct pcmcia_device *p_dev); 289 static void nsp_cs_release(struct pcmcia_device *link); 290 static int nsp_cs_config (struct pcmcia_device *link); 291 292 /* Linux SCSI subsystem specific functions */ 293 static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht); 294 static const char *nsp_info (struct Scsi_Host *shpnt); 295 static int nsp_show_info (struct seq_file *m, 296 struct Scsi_Host *host); 297 static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); 298 299 /* Error handler */ 300 /*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/ 301 /*static int nsp_eh_device_reset(struct scsi_cmnd *SCpnt);*/ 302 static int nsp_eh_bus_reset (struct scsi_cmnd *SCpnt); 303 static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt); 304 static int nsp_bus_reset (nsp_hw_data *data); 305 306 /* */ 307 static void nsphw_init (nsp_hw_data *data); 308 static bool nsphw_start_selection(struct scsi_cmnd *SCpnt); 309 static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time); 310 static int nsp_fifo_count (struct scsi_cmnd *SCpnt); 311 static void nsp_pio_read (struct scsi_cmnd *SCpnt); 312 static void nsp_pio_write (struct scsi_cmnd *SCpnt); 313 static int nsp_nexus (struct scsi_cmnd *SCpnt); 314 static void nsp_scsi_done (struct scsi_cmnd *SCpnt); 315 static int nsp_analyze_sdtr (struct scsi_cmnd *SCpnt); 316 static int nsp_negate_signal (struct scsi_cmnd *SCpnt, 317 unsigned char mask, char *str); 318 static int nsp_expect_signal (struct scsi_cmnd *SCpnt, 319 unsigned char current_phase, 320 unsigned char mask); 321 static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase); 322 static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt); 323 static void nsp_reselected (struct scsi_cmnd *SCpnt); 324 static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht); 325 326 /* Interrupt handler */ 327 //static irqreturn_t nspintr(int irq, void *dev_id); 328 329 /* Debug */ 330 #ifdef NSP_DEBUG 331 static void show_command (struct scsi_cmnd *SCpnt); 332 static void show_phase (struct scsi_cmnd *SCpnt); 333 static void show_busphase(unsigned char stat); 334 static void show_message (nsp_hw_data *data); 335 #else 336 # define show_command(ptr) /* */ 337 # define show_phase(SCpnt) /* */ 338 # define show_busphase(stat) /* */ 339 # define show_message(data) /* */ 340 #endif 341 342 /* 343 * SCSI phase 344 */ 345 enum _scsi_phase { 346 PH_UNDETERMINED , 347 PH_ARBSTART , 348 PH_SELSTART , 349 PH_SELECTED , 350 PH_COMMAND , 351 PH_DATA , 352 PH_STATUS , 353 PH_MSG_IN , 354 PH_MSG_OUT , 355 PH_DISCONNECT , 356 PH_RESELECT , 357 PH_ABORT , 358 PH_RESET 359 }; 360 361 enum _data_in_out { 362 IO_UNKNOWN, 363 IO_IN, 364 IO_OUT 365 }; 366 367 enum _burst_mode { 368 BURST_IO8 = 0, 369 BURST_IO32 = 1, 370 BURST_MEM32 = 2, 371 }; 372 373 /* scatter-gather table */ 374 #define BUFFER_ADDR(SCpnt) ((char *)(sg_virt(nsp_priv(SCpnt)->buffer))) 375 376 #endif /*__nsp_cs__*/ 377 /* end */ 378