1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called LICENSE.GPL.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 #ifndef __il_csr_h__
64 #define __il_csr_h__
65 /*
66  * CSR (control and status registers)
67  *
68  * CSR registers are mapped directly into PCI bus space, and are accessible
69  * whenever platform supplies power to device, even when device is in
70  * low power states due to driver-invoked device resets
71  * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
72  *
73  * Use _il_wr() and _il_rd() family to access these registers;
74  * these provide simple PCI bus access, without waking up the MAC.
75  * Do not use il_wr() family for these registers;
76  * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
77  * The MAC (uCode processor, etc.) does not need to be powered up for accessing
78  * the CSR registers.
79  *
80  * NOTE:  Device does need to be awake in order to read this memory
81  *        via CSR_EEPROM register
82  */
83 #define CSR_BASE    (0x000)
84 
85 #define CSR_HW_IF_CONFIG_REG    (CSR_BASE+0x000)	/* hardware interface config */
86 #define CSR_INT_COALESCING      (CSR_BASE+0x004)	/* accum ints, 32-usec units */
87 #define CSR_INT                 (CSR_BASE+0x008)	/* host interrupt status/ack */
88 #define CSR_INT_MASK            (CSR_BASE+0x00c)	/* host interrupt enable */
89 #define CSR_FH_INT_STATUS       (CSR_BASE+0x010)	/* busmaster int status/ack */
90 #define CSR_GPIO_IN             (CSR_BASE+0x018)	/* read external chip pins */
91 #define CSR_RESET               (CSR_BASE+0x020)	/* busmaster enable, NMI, etc */
92 #define CSR_GP_CNTRL            (CSR_BASE+0x024)
93 
94 /* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */
95 #define CSR_INT_PERIODIC_REG	(CSR_BASE+0x005)
96 
97 /*
98  * Hardware revision info
99  * Bit fields:
100  * 31-8:  Reserved
101  *  7-4:  Type of device:  see CSR_HW_REV_TYPE_xxx definitions
102  *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
103  *  1-0:  "Dash" (-) value, as in A-1, etc.
104  *
105  * NOTE:  Revision step affects calculation of CCK txpower for 4965.
106  * NOTE:  See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
107  */
108 #define CSR_HW_REV              (CSR_BASE+0x028)
109 
110 /*
111  * EEPROM memory reads
112  *
113  * NOTE:  Device must be awake, initialized via apm_ops.init(),
114  *        in order to read.
115  */
116 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
117 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
118 
119 #define CSR_GIO_REG		(CSR_BASE+0x03C)
120 #define CSR_GP_UCODE_REG	(CSR_BASE+0x048)
121 #define CSR_GP_DRIVER_REG	(CSR_BASE+0x050)
122 
123 /*
124  * UCODE-DRIVER GP (general purpose) mailbox registers.
125  * SET/CLR registers set/clear bit(s) if "1" is written.
126  */
127 #define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
128 #define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
129 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
130 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
131 
132 #define CSR_LED_REG             (CSR_BASE+0x094)
133 #define CSR_DRAM_INT_TBL_REG	(CSR_BASE+0x0A0)
134 
135 /* GIO Chicken Bits (PCI Express bus link power management) */
136 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
137 
138 /* Analog phase-lock-loop configuration  */
139 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
140 
141 /*
142  * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
143  * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
144  * See also CSR_HW_REV register.
145  * Bit fields:
146  *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
147  *  1-0:  "Dash" (-) value, as in C-1, etc.
148  */
149 #define CSR_HW_REV_WA_REG		(CSR_BASE+0x22C)
150 
151 #define CSR_DBG_HPET_MEM_REG		(CSR_BASE+0x240)
152 #define CSR_DBG_LINK_PWR_MGMT_REG	(CSR_BASE+0x250)
153 
154 /* Bits for CSR_HW_IF_CONFIG_REG */
155 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
156 #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER	(0x00000C00)
157 #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI 	(0x00000100)
158 #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI	(0x00000200)
159 
160 #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB         (0x00000100)
161 #define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM         (0x00000200)
162 #define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC            (0x00000400)
163 #define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE         (0x00000800)
164 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
165 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
166 
167 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A	(0x00080000)
168 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM	(0x00200000)
169 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY	(0x00400000)	/* PCI_OWN_SEM */
170 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000)	/* ME_OWN */
171 #define CSR_HW_IF_CONFIG_REG_PREPARE		  (0x08000000)	/* WAKE_ME */
172 
173 #define CSR_INT_PERIODIC_DIS			(0x00)	/* disable periodic int */
174 #define CSR_INT_PERIODIC_ENA			(0xFF)	/* 255*32 usec ~ 8 msec */
175 
176 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
177  * acknowledged (reset) by host writing "1" to flagged bits. */
178 #define CSR_INT_BIT_FH_RX        (1 << 31)	/* Rx DMA, cmd responses, FH_INT[17:16] */
179 #define CSR_INT_BIT_HW_ERR       (1 << 29)	/* DMA hardware error FH_INT[31] */
180 #define CSR_INT_BIT_RX_PERIODIC	 (1 << 28)	/* Rx periodic */
181 #define CSR_INT_BIT_FH_TX        (1 << 27)	/* Tx DMA FH_INT[1:0] */
182 #define CSR_INT_BIT_SCD          (1 << 26)	/* TXQ pointer advanced */
183 #define CSR_INT_BIT_SW_ERR       (1 << 25)	/* uCode error */
184 #define CSR_INT_BIT_RF_KILL      (1 << 7)	/* HW RFKILL switch GP_CNTRL[27] toggled */
185 #define CSR_INT_BIT_CT_KILL      (1 << 6)	/* Critical temp (chip too hot) rfkill */
186 #define CSR_INT_BIT_SW_RX        (1 << 3)	/* Rx, command responses, 3945 */
187 #define CSR_INT_BIT_WAKEUP       (1 << 1)	/* NIC controller waking up (pwr mgmt) */
188 #define CSR_INT_BIT_ALIVE        (1 << 0)	/* uCode interrupts once it initializes */
189 
190 #define CSR_INI_SET_MASK	(CSR_INT_BIT_FH_RX   | \
191 				 CSR_INT_BIT_HW_ERR  | \
192 				 CSR_INT_BIT_FH_TX   | \
193 				 CSR_INT_BIT_SW_ERR  | \
194 				 CSR_INT_BIT_RF_KILL | \
195 				 CSR_INT_BIT_SW_RX   | \
196 				 CSR_INT_BIT_WAKEUP  | \
197 				 CSR_INT_BIT_ALIVE)
198 
199 /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
200 #define CSR_FH_INT_BIT_ERR       (1 << 31)	/* Error */
201 #define CSR_FH_INT_BIT_HI_PRIOR  (1 << 30)	/* High priority Rx, bypass coalescing */
202 #define CSR39_FH_INT_BIT_RX_CHNL2  (1 << 18)	/* Rx channel 2 (3945 only) */
203 #define CSR_FH_INT_BIT_RX_CHNL1  (1 << 17)	/* Rx channel 1 */
204 #define CSR_FH_INT_BIT_RX_CHNL0  (1 << 16)	/* Rx channel 0 */
205 #define CSR39_FH_INT_BIT_TX_CHNL6  (1 << 6)	/* Tx channel 6 (3945 only) */
206 #define CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)	/* Tx channel 1 */
207 #define CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)	/* Tx channel 0 */
208 
209 #define CSR39_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
210 				 CSR39_FH_INT_BIT_RX_CHNL2 | \
211 				 CSR_FH_INT_BIT_RX_CHNL1 | \
212 				 CSR_FH_INT_BIT_RX_CHNL0)
213 
214 #define CSR39_FH_INT_TX_MASK	(CSR39_FH_INT_BIT_TX_CHNL6 | \
215 				 CSR_FH_INT_BIT_TX_CHNL1 | \
216 				 CSR_FH_INT_BIT_TX_CHNL0)
217 
218 #define CSR49_FH_INT_RX_MASK	(CSR_FH_INT_BIT_HI_PRIOR | \
219 				 CSR_FH_INT_BIT_RX_CHNL1 | \
220 				 CSR_FH_INT_BIT_RX_CHNL0)
221 
222 #define CSR49_FH_INT_TX_MASK	(CSR_FH_INT_BIT_TX_CHNL1 | \
223 				 CSR_FH_INT_BIT_TX_CHNL0)
224 
225 /* GPIO */
226 #define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
227 #define CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
228 #define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC               (0x00000200)
229 
230 /* RESET */
231 #define CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
232 #define CSR_RESET_REG_FLAG_FORCE_NMI                 (0x00000002)
233 #define CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
234 #define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
235 #define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
236 #define CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)
237 
238 /*
239  * GP (general purpose) CONTROL REGISTER
240  * Bit fields:
241  *    27:  HW_RF_KILL_SW
242  *         Indicates state of (platform's) hardware RF-Kill switch
243  * 26-24:  POWER_SAVE_TYPE
244  *         Indicates current power-saving mode:
245  *         000 -- No power saving
246  *         001 -- MAC power-down
247  *         010 -- PHY (radio) power-down
248  *         011 -- Error
249  *   9-6:  SYS_CONFIG
250  *         Indicates current system configuration, reflecting pins on chip
251  *         as forced high/low by device circuit board.
252  *     4:  GOING_TO_SLEEP
253  *         Indicates MAC is entering a power-saving sleep power-down.
254  *         Not a good time to access device-internal resources.
255  *     3:  MAC_ACCESS_REQ
256  *         Host sets this to request and maintain MAC wakeup, to allow host
257  *         access to device-internal resources.  Host must wait for
258  *         MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
259  *         device registers.
260  *     2:  INIT_DONE
261  *         Host sets this to put device into fully operational D0 power mode.
262  *         Host resets this after SW_RESET to put device into low power mode.
263  *     0:  MAC_CLOCK_READY
264  *         Indicates MAC (ucode processor, etc.) is powered up and can run.
265  *         Internal resources are accessible.
266  *         NOTE:  This does not indicate that the processor is actually running.
267  *         NOTE:  This does not indicate that 4965 or 3945 has completed
268  *                init or post-power-down restore of internal SRAM memory.
269  *                Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
270  *                SRAM is restored and uCode is in normal operation mode.
271  *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
272  *                do not need to save/restore it.
273  *         NOTE:  After device reset, this bit remains "0" until host sets
274  *                INIT_DONE
275  */
276 #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
277 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
278 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
279 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
280 
281 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)
282 
283 #define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE         (0x07000000)
284 #define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE         (0x04000000)
285 #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)
286 
287 /* EEPROM REG */
288 #define CSR_EEPROM_REG_READ_VALID_MSK	(0x00000001)
289 #define CSR_EEPROM_REG_BIT_CMD		(0x00000002)
290 #define CSR_EEPROM_REG_MSK_ADDR		(0x0000FFFC)
291 #define CSR_EEPROM_REG_MSK_DATA		(0xFFFF0000)
292 
293 /* EEPROM GP */
294 #define CSR_EEPROM_GP_VALID_MSK		(0x00000007)	/* signature */
295 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
296 #define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K		(0x00000002)
297 #define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K		(0x00000004)
298 
299 /* GP REG */
300 #define CSR_GP_REG_POWER_SAVE_STATUS_MSK            (0x03000000)	/* bit 24/25 */
301 #define CSR_GP_REG_NO_POWER_SAVE            (0x00000000)
302 #define CSR_GP_REG_MAC_POWER_SAVE           (0x01000000)
303 #define CSR_GP_REG_PHY_POWER_SAVE           (0x02000000)
304 #define CSR_GP_REG_POWER_SAVE_ERROR         (0x03000000)
305 
306 /* CSR GIO */
307 #define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
308 
309 /*
310  * UCODE-DRIVER GP (general purpose) mailbox register 1
311  * Host driver and uCode write and/or read this register to communicate with
312  * each other.
313  * Bit fields:
314  *     4:  UCODE_DISABLE
315  *         Host sets this to request permanent halt of uCode, same as
316  *         sending CARD_STATE command with "halt" bit set.
317  *     3:  CT_KILL_EXIT
318  *         Host sets this to request exit from CT_KILL state, i.e. host thinks
319  *         device temperature is low enough to continue normal operation.
320  *     2:  CMD_BLOCKED
321  *         Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
322  *         to release uCode to clear all Tx and command queues, enter
323  *         unassociated mode, and power down.
324  *         NOTE:  Some devices also use HBUS_TARG_MBX_C register for this bit.
325  *     1:  SW_BIT_RFKILL
326  *         Host sets this when issuing CARD_STATE command to request
327  *         device sleep.
328  *     0:  MAC_SLEEP
329  *         uCode sets this when preparing a power-saving power-down.
330  *         uCode resets this when power-up is complete and SRAM is sane.
331  *         NOTE:  3945/4965 saves internal SRAM data to host when powering down,
332  *                and must restore this data after powering back up.
333  *                MAC_SLEEP is the best indication that restore is complete.
334  *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
335  *                do not need to save/restore it.
336  */
337 #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
338 #define CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)
339 #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
340 #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT      (0x00000008)
341 
342 /* GIO Chicken Bits (PCI Express bus link power management) */
343 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
344 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)
345 
346 /* LED */
347 #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
348 #define CSR_LED_REG_TRUN_ON (0x78)
349 #define CSR_LED_REG_TRUN_OFF (0x38)
350 
351 /* ANA_PLL */
352 #define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
353 
354 /* HPET MEM debug */
355 #define CSR_DBG_HPET_MEM_REG_VAL	(0xFFFF0000)
356 
357 /* DRAM INT TBL */
358 #define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
359 #define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
360 
361 /*
362  * HBUS (Host-side Bus)
363  *
364  * HBUS registers are mapped directly into PCI bus space, but are used
365  * to indirectly access device's internal memory or registers that
366  * may be powered-down.
367  *
368  * Use il_wr()/il_rd() family
369  * for these registers;
370  * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
371  * to make sure the MAC (uCode processor, etc.) is powered up for accessing
372  * internal resources.
373  *
374  * Do not use _il_wr()/_il_rd() family to access these registers;
375  * these provide only simple PCI bus access, without waking up the MAC.
376  */
377 #define HBUS_BASE	(0x400)
378 
379 /*
380  * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
381  * structures, error log, event log, verifying uCode load).
382  * First write to address register, then read from or write to data register
383  * to complete the job.  Once the address register is set up, accesses to
384  * data registers auto-increment the address by one dword.
385  * Bit usage for address registers (read or write):
386  *  0-31:  memory address within device
387  */
388 #define HBUS_TARG_MEM_RADDR     (HBUS_BASE+0x00c)
389 #define HBUS_TARG_MEM_WADDR     (HBUS_BASE+0x010)
390 #define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
391 #define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)
392 
393 /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
394 #define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
395 #define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)
396 
397 /*
398  * Registers for accessing device's internal peripheral registers
399  * (e.g. SCD, BSM, etc.).  First write to address register,
400  * then read from or write to data register to complete the job.
401  * Bit usage for address registers (read or write):
402  *  0-15:  register address (offset) within device
403  * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
404  */
405 #define HBUS_TARG_PRPH_WADDR    (HBUS_BASE+0x044)
406 #define HBUS_TARG_PRPH_RADDR    (HBUS_BASE+0x048)
407 #define HBUS_TARG_PRPH_WDAT     (HBUS_BASE+0x04c)
408 #define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
409 
410 /*
411  * Per-Tx-queue write pointer (idx, really!)
412  * Indicates idx to next TFD that driver will fill (1 past latest filled).
413  * Bit usage:
414  *  0-7:  queue write idx
415  * 11-8:  queue selector
416  */
417 #define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
418 
419 #endif /* !__il_csr_h__ */
420