xref: /openbmc/u-boot/drivers/video/bridge/Kconfig (revision 2d5e6b4a)
1config VIDEO_BRIDGE
2	bool "Support video bridges"
3	depends on DM
4	help
5	  Some platforms use video bridges to convert from one output to
6	  another. For example, where the SoC only supports eDP and the LCD
7	  requires LVDS, an eDP->LVDS bridge chip can be used to provide the
8	  necessary conversion. This option enables support for these devices.
9
10config VIDEO_BRIDGE_PARADE_PS862X
11	bool "Support Parade PS862X DP->LVDS bridge"
12	depends on VIDEO_BRIDGE
13	help
14	  The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage
15	  differential signalling) converters. They enable an LVDS LCD panel
16	  to be connected to an eDP output device such as an SoC that lacks
17	  LVDS capability, or where LVDS requires too many signals to route
18	  on the PCB. Setup parameters are provided in the device tree.
19
20config VIDEO_BRIDGE_NXP_PTN3460
21	bool "Support NXP PTN3460 DP->LVDS bridge"
22	depends on VIDEO_BRIDGE
23	help
24	  The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential
25	  signalling) converter. It enables an LVDS LCD panel to be connected
26	  to an eDP output device such as an SoC that lacks LVDS capability,
27	  or where LVDS requires too many signals to route on the PCB.
28
29config VIDEO_BRIDGE_ANALOGIX_ANX6345
30	bool "Support Analogix ANX6345 RGB->DP bridge"
31	depends on VIDEO_BRIDGE
32	select DM_I2C
33	help
34	 The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD
35	 panel to be connected to an parallel LCD interface.
36