xref: /openbmc/linux/drivers/usb/serial/Kconfig (revision 3d7df3f8)
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7	tristate "USB Serial Converter support"
8	depends on TTY
9	help
10	  Say Y here if you have a USB device that provides normal serial
11	  ports, or acts like a serial device, and you want to connect it to
12	  your USB bus.
13
14	  Please read <file:Documentation/usb/usb-serial.rst> for more
15	  information on the specifics of the different devices that are
16	  supported, and on how to use them.
17
18	  To compile this driver as a module, choose M here: the
19	  module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24	bool "USB Serial Console device support"
25	depends on USB_SERIAL=y
26	help
27	  If you say Y here, it will be possible to use a USB to serial
28	  converter port as the system console (the system console is the
29	  device which receives all kernel messages and warnings and which
30	  allows logins in single user mode). This could be useful if some
31	  terminal or printer is connected to that serial port.
32
33	  Even if you say Y here, the currently visible virtual console
34	  (/dev/tty0) will still be used as the system console by default, but
35	  you can alter that using a kernel command line option such as
36	  "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37	  your boot loader (lilo or loadlin) about how to pass options to the
38	  kernel at boot time.)
39
40	  If you don't have a VGA card installed and you say Y here, the
41	  kernel will automatically use the first USB to serial converter
42	  port, /dev/ttyUSB0, as system console.
43
44	  If unsure, say N.
45
46config USB_SERIAL_GENERIC
47	bool "USB Generic Serial Driver"
48	help
49	  Say Y here if you want to use the generic USB serial driver.  Please
50	  read <file:Documentation/usb/usb-serial.rst> for more information on
51	  using this driver.  It is recommended that the "USB Serial converter
52	  support" be compiled as a module for this driver to be used
53	  properly.
54
55config USB_SERIAL_SIMPLE
56	tristate "USB Serial Simple Driver"
57	help
58	  Say Y here to use the USB serial "simple" driver.  This driver
59	  handles a wide range of very simple devices, all in one
60	  driver.  Specifically, it supports:
61		- Suunto ANT+ USB device.
62		- Medtronic CareLink USB device
63		- Fundamental Software dongle.
64		- Google USB serial devices
65		- HP4x calculators
66		- Libtransistor USB console
67		- a number of Motorola phones
68		- Motorola Tetra devices
69		- Nokia mobile phones
70		- Novatel Wireless GPS receivers
71		- Siemens USB/MPI adapter.
72		- ViVOtech ViVOpay USB device.
73		- Infineon Modem Flashloader USB interface
74		- ZIO Motherboard USB serial interface
75
76	  To compile this driver as a module, choose M here: the module
77	  will be called usb-serial-simple.
78
79config USB_SERIAL_AIRCABLE
80	tristate "USB AIRcable Bluetooth Dongle Driver"
81	help
82	    Say Y here if you want to use USB AIRcable Bluetooth Dongle.
83
84	    To compile this driver as a module, choose M here: the module
85	    will be called aircable.
86
87config USB_SERIAL_ARK3116
88	tristate "USB ARK Micro 3116 USB Serial Driver"
89	help
90	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
91	  device.
92
93	  To compile this driver as a module, choose M here: the
94	  module will be called ark3116
95
96config USB_SERIAL_BELKIN
97	tristate "USB Belkin and Peracom Single Port Serial Driver"
98	help
99	  Say Y here if you want to use a Belkin USB Serial single port
100	  adaptor (F5U103 is one of the model numbers) or the Peracom single
101	  port USB to serial adapter.
102
103	  To compile this driver as a module, choose M here: the
104	  module will be called belkin_sa.
105
106config USB_SERIAL_CH341
107	tristate "USB Winchiphead CH341 Single Port Serial Driver"
108	help
109	  Say Y here if you want to use a Winchiphead CH341 single port
110	  USB to serial adapter.
111
112	  To compile this driver as a module, choose M here: the
113	  module will be called ch341.
114
115config USB_SERIAL_WHITEHEAT
116	tristate "USB ConnectTech WhiteHEAT Serial Driver"
117	select USB_EZUSB_FX2
118	help
119	  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
120	  USB to serial converter device.
121
122	  To compile this driver as a module, choose M here: the
123	  module will be called whiteheat.
124
125config USB_SERIAL_DIGI_ACCELEPORT
126	tristate "USB Digi International AccelePort USB Serial Driver"
127	help
128	  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
129	  2 port (plus parallel port) and 4 port USB serial converters.  The
130	  parallel port on the USB 2 appears as a third serial port on Linux.
131	  The Digi Acceleport USB 8 is not yet supported by this driver.
132
133	  To compile this driver as a module, choose M here: the
134	  module will be called digi_acceleport.
135
136config USB_SERIAL_CP210X
137	tristate "USB CP210x family of UART Bridge Controllers"
138	help
139	  Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
140	  to RS232 converters.
141
142	  To compile this driver as a module, choose M here: the
143	  module will be called cp210x.
144
145config USB_SERIAL_CYPRESS_M8
146	tristate "USB Cypress M8 USB Serial Driver"
147	help
148	  Say Y here if you want to use a device that contains the Cypress
149	  USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
150
151		Attempted SMP support... send bug reports!
152
153	  Supported microcontrollers in the CY4601 family are:
154		CY7C63741 CY7C63742 CY7C63743 CY7C64013
155
156	  To compile this driver as a module, choose M here: the
157	  module will be called cypress_m8.
158
159config USB_SERIAL_EMPEG
160	tristate "USB Empeg empeg-car Mark I/II Driver"
161	help
162	  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
163	  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
164	  device node.  See <file:Documentation/usb/usb-serial.rst> for more
165	  tidbits of information.
166
167	  To compile this driver as a module, choose M here: the
168	  module will be called empeg.
169
170config USB_SERIAL_FTDI_SIO
171	tristate "USB FTDI Single Port Serial Driver"
172	help
173	  Say Y here if you want to use a FTDI SIO single port USB to serial
174	  converter device. The implementation I have is called the USC-1000.
175	  This driver has also been tested with the 245 and 232 devices.
176
177	  See <http://ftdi-usb-sio.sourceforge.net/> for more
178	  information on this driver and the device.
179
180	  To compile this driver as a module, choose M here: the
181	  module will be called ftdi_sio.
182
183config USB_SERIAL_VISOR
184	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
185	help
186	  Say Y here if you want to connect to your HandSpring Visor, Palm
187	  m500 or m505 through its USB docking station. See
188	  <http://usbvisor.sourceforge.net/index.php3> for more information on using this
189	  driver.
190
191	  To compile this driver as a module, choose M here: the
192	  module will be called visor.
193
194config USB_SERIAL_IPAQ
195	tristate "USB PocketPC PDA Driver"
196	help
197	  Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
198	  or any other PDA running Windows CE 3.0 or PocketPC 2002
199	  using a USB cradle/cable. For information on using the driver,
200	  read <file:Documentation/usb/usb-serial.rst>.
201
202	  To compile this driver as a module, choose M here: the
203	  module will be called ipaq.
204
205config USB_SERIAL_IR
206	tristate "USB IR Dongle Serial Driver"
207	help
208	  Say Y here if you want to enable simple serial support for USB IrDA
209	  devices.  This is useful if you do not want to use the full IrDA
210	  stack.
211
212	  To compile this driver as a module, choose M here: the
213	  module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216	tristate "USB Inside Out Edgeport Serial Driver"
217	help
218	  Say Y here if you want to use any of the following devices from
219	  Inside Out Networks (Digi):
220	  Edgeport/4
221	  Rapidport/4
222	  Edgeport/4t
223	  Edgeport/2
224	  Edgeport/4i
225	  Edgeport/2i
226	  Edgeport/421
227	  Edgeport/21
228	  Edgeport/8
229	  Edgeport/8 Dual
230	  Edgeport/2D8
231	  Edgeport/4D8
232	  Edgeport/8i
233	  Edgeport/2 DIN
234	  Edgeport/4 DIN
235	  Edgeport/16 Dual
236
237	  To compile this driver as a module, choose M here: the
238	  module will be called io_edgeport.
239
240config USB_SERIAL_EDGEPORT_TI
241	tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
242	help
243	  Say Y here if you want to use any of the devices from Inside Out
244	  Networks (Digi) that are not supported by the io_edgeport driver.
245	  This includes the Edgeport/1 device.
246
247	  To compile this driver as a module, choose M here: the
248	  module will be called io_ti.
249
250config USB_SERIAL_F81232
251	tristate "USB Fintek F81232 Single Port Serial Driver"
252	help
253	  Say Y here if you want to use the Fintek F81232 single
254	  port usb to serial adapter.
255
256	  To compile this driver as a module, choose M here: the
257	  module will be called f81232.
258
259config USB_SERIAL_F8153X
260	tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
261	help
262	  Say Y here if you want to use the Fintek F81532/534 Multi-Ports
263	  USB to serial adapter.
264
265	  To compile this driver as a module, choose M here: the
266	  module will be called f81534.
267
268
269config USB_SERIAL_GARMIN
270	tristate "USB Garmin GPS driver"
271	help
272	  Say Y here if you want to connect to your Garmin GPS.
273	  Should work with most Garmin GPS devices which have a native USB port.
274
275	  See <http://sourceforge.net/projects/garmin-gps> for the latest
276	  version of the driver.
277
278	  To compile this driver as a module, choose M here: the
279	  module will be called garmin_gps.
280
281config USB_SERIAL_IPW
282	tristate "USB IPWireless (3G UMTS TDD) Driver"
283	select USB_SERIAL_WWAN
284	help
285	  Say Y here if you want to use a IPWireless USB modem such as
286	  the ones supplied by Axity3G/Sentech South Africa.
287
288	  To compile this driver as a module, choose M here: the
289	  module will be called ipw.
290
291config USB_SERIAL_IUU
292	tristate "USB Infinity USB Unlimited Phoenix Driver"
293	help
294	  Say Y here if you want to use a IUU in phoenix mode and get
295	  an extra ttyUSBx device. More information available on
296	  http://eczema.ecze.com/iuu_phoenix.html
297
298	  To compile this driver as a module, choose M here: the
299	  module will be called iuu_phoenix.o
300
301config USB_SERIAL_KEYSPAN_PDA
302	tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
303	select USB_EZUSB_FX2
304	help
305	  Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
306	  port USB to serial converter device. This driver makes use of
307	  firmware developed from scratch by Brian Warner.
308
309	  To compile this driver as a module, choose M here: the
310	  module will be called keyspan_pda.
311
312config USB_SERIAL_KEYSPAN
313	tristate "USB Keyspan USA-xxx Serial Driver"
314	select USB_EZUSB_FX2
315	help
316	  Say Y here if you want to use Keyspan USB to serial converter
317	  devices.  This driver makes use of Keyspan's official firmware
318	  and was developed with their support.  You must also include
319	  firmware to support your particular device(s).
320
321	  See <http://blemings.org/hugh/keyspan.html> for more information.
322
323	  To compile this driver as a module, choose M here: the
324	  module will be called keyspan.
325
326config USB_SERIAL_KLSI
327	tristate "USB KL5KUSB105 (Palmconnect) Driver"
328	help
329	  Say Y here if you want to use a KL5KUSB105 - based single port
330	  serial adapter. The most widely known -- and currently the only
331	  tested -- device in this category is the PalmConnect USB Serial
332	  adapter sold by Palm Inc. for use with their Palm III and Palm V
333	  series PDAs.
334
335	  Please read <file:Documentation/usb/usb-serial.rst> for more
336	  information.
337
338	  To compile this driver as a module, choose M here: the
339	  module will be called kl5kusb105.
340
341config USB_SERIAL_KOBIL_SCT
342	tristate "USB KOBIL chipcard reader"
343	help
344	  Say Y here if you want to use one of the following KOBIL USB chipcard
345	  readers:
346
347	    - USB TWIN
348	    - KAAN Standard Plus
349	    - KAAN SIM
350	    - SecOVID Reader Plus
351	    - B1 Professional
352	    - KAAN Professional
353
354	  Note that you need a current CT-API.
355	  To compile this driver as a module, choose M here: the
356	  module will be called kobil_sct.
357
358config USB_SERIAL_MCT_U232
359	tristate "USB MCT Single Port Serial Driver"
360	help
361	  Say Y here if you want to use a USB Serial single port adapter from
362	  Magic Control Technology Corp. (U232 is one of the model numbers).
363
364	  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
365	  BAY, Belkin F5U109, and Belkin F5U409 devices.
366
367	  To compile this driver as a module, choose M here: the
368	  module will be called mct_u232.
369
370config USB_SERIAL_METRO
371	tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
372	help
373	  Say Y here if you want to use a USB POS Metrologic barcode scanner.
374
375	  To compile this driver as a module, choose M here: the
376	  module will be called metro-usb.
377
378config USB_SERIAL_MOS7720
379	tristate "USB Moschip 7720 Serial Driver"
380	help
381	  Say Y here if you want to use USB Serial single and double
382	  port adapters from Moschip Semiconductor Tech.
383
384	  To compile this driver as a module, choose M here: the
385	  module will be called mos7720.
386
387config USB_SERIAL_MOS7715_PARPORT
388	bool "Support for parallel port on the Moschip 7715"
389	depends on USB_SERIAL_MOS7720
390	depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
391	select PARPORT_NOT_PC
392	help
393	Say Y if you have a Moschip 7715 device and would like to use
394	the parallel port it provides.  The port will register with
395	the parport subsystem as a low-level driver.
396
397config USB_SERIAL_MOS7840
398	tristate "USB Moschip 7840/7820 USB Serial Driver"
399	help
400	  Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
401	  Dual-Serial port device from MosChip Semiconductor.
402
403	  The MCS7840 and MCS7820 have been developed to connect a wide range
404	  of standard serial devices to a USB host.  The MCS7840 has a USB
405	  device controller connected to four (4) individual UARTs while the
406	  MCS7820 controller connects to two (2) individual UARTs.
407
408	  To compile this driver as a module, choose M here: the
409	  module will be called mos7840.  If unsure, choose N.
410
411config USB_SERIAL_MXUPORT
412	tristate "USB Moxa UPORT Serial Driver"
413	help
414	  Say Y here if you want to use a MOXA UPort Serial hub.
415
416	  This driver supports:
417
418	  [2 Port]
419	  - UPort 1250 :  2 Port RS-232/422/485 USB to Serial Hub
420	  - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
421			  Isolation
422
423	  [4 Port]
424	  - UPort 1410 :  4 Port RS-232 USB to Serial Hub
425	  - UPort 1450 :  4 Port RS-232/422/485 USB to Serial Hub
426	  - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
427			  Isolation
428
429	  [8 Port]
430	  - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
431	  - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
432
433	  [16 Port]
434	  - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
435	  - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
436
437	  To compile this driver as a module, choose M here: the
438	  module will be called mxuport.
439
440config USB_SERIAL_NAVMAN
441	tristate "USB Navman GPS device"
442	help
443	  To compile this driver as a module, choose M here: the
444	  module will be called navman.
445
446config USB_SERIAL_PL2303
447	tristate "USB Prolific 2303 Single Port Serial Driver"
448	help
449	  Say Y here if you want to use the PL2303 USB Serial single port
450	  adapter from Prolific.
451
452	  To compile this driver as a module, choose M here: the
453	  module will be called pl2303.
454
455config USB_SERIAL_OTI6858
456	tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
457	help
458	  Say Y here if you want to use the OTi-6858 single port USB to serial
459	  converter device.
460
461	  To compile this driver as a module, choose M here: the
462	  module will be called oti6858.
463
464config USB_SERIAL_QCAUX
465	tristate "USB Qualcomm Auxiliary Serial Port Driver"
466	help
467	  Say Y here if you want to use the auxiliary serial ports provided
468	  by many modems based on Qualcomm chipsets.  These ports often use
469	  a proprietary protocol called DM and cannot be used for AT- or
470	  PPP-based communication.
471
472	  To compile this driver as a module, choose M here: the
473	  module will be called qcaux.  If unsure, choose N.
474
475config USB_SERIAL_QUALCOMM
476	tristate "USB Qualcomm Serial modem"
477	select USB_SERIAL_WWAN
478	help
479	  Say Y here if you have a Qualcomm USB modem device.  These are
480	  usually wireless cellular modems.
481
482	  To compile this driver as a module, choose M here: the
483	  module will be called qcserial.
484
485config USB_SERIAL_SPCP8X5
486	tristate "USB SPCP8x5 USB To Serial Driver"
487	help
488	  Say Y here if you want to use the spcp8x5 converter chip.  This is
489	  commonly found in some Z-Wave USB devices.
490
491	  To compile this driver as a module, choose M here: the
492	  module will be called spcp8x5.
493
494config USB_SERIAL_SAFE
495	tristate "USB Safe Serial (Encapsulated) Driver"
496
497config USB_SERIAL_SAFE_PADDED
498	bool "USB Secure Encapsulated Driver - Padded"
499	depends on USB_SERIAL_SAFE
500
501config USB_SERIAL_SIERRAWIRELESS
502	tristate "USB Sierra Wireless Driver"
503	help
504	  Say M here if you want to use Sierra Wireless devices.
505
506	  Many devices have a feature known as TRU-Install. For those devices
507	  to work properly, the USB Storage Sierra feature must be enabled.
508
509	  To compile this driver as a module, choose M here: the
510	  module will be called sierra.
511
512config USB_SERIAL_SYMBOL
513	tristate "USB Symbol Barcode driver (serial mode)"
514	help
515	  Say Y here if you want to use a Symbol USB Barcode device
516	  in serial emulation mode.
517
518	  To compile this driver as a module, choose M here: the
519	  module will be called symbolserial.
520
521config USB_SERIAL_TI
522	tristate "USB TI 3410/5052 Serial Driver"
523	help
524	  Say Y here if you want to use the TI USB 3410 or 5052
525	  serial devices.
526
527	  To compile this driver as a module, choose M here: the
528	  module will be called ti_usb_3410_5052.
529
530config USB_SERIAL_CYBERJACK
531	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
532	help
533	  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
534	  reader. This is an interface to ISO 7816 compatible contact-based
535	  chipcards, e.g. GSM SIMs.
536
537	  To compile this driver as a module, choose M here: the
538	  module will be called cyberjack.
539
540	  If unsure, say N.
541
542config USB_SERIAL_WWAN
543	tristate
544
545config USB_SERIAL_OPTION
546	tristate "USB driver for GSM and CDMA modems"
547	select USB_SERIAL_WWAN
548	help
549	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
550
551	  This driver also supports several PCMCIA cards which have a
552	  built-in OHCI-USB adapter and an internally-connected GSM modem.
553	  The USB bus on these cards is not accessible externally.
554
555	  Supported devices include (some of?) those made by:
556	  Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
557
558	  To compile this driver as a module, choose M here: the
559	  module will be called option.
560
561	  If this driver doesn't recognize your device,
562	  it might be accessible via the FTDI_SIO driver.
563
564config USB_SERIAL_OMNINET
565	tristate "USB ZyXEL omni.net LCD Plus Driver"
566	help
567	  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
568
569	  To compile this driver as a module, choose M here: the
570	  module will be called omninet.
571
572config USB_SERIAL_OPTICON
573	tristate "USB Opticon Barcode driver (serial mode)"
574	help
575	  Say Y here if you want to use a Opticon USB Barcode device
576	  in serial emulation mode.
577
578	  To compile this driver as a module, choose M here: the
579	  module will be called opticon.
580
581config USB_SERIAL_XSENS_MT
582	tristate "Xsens motion tracker serial interface driver"
583	help
584	  Say Y here if you want to use Xsens motion trackers.
585
586	  This driver supports the new generation of motion trackers
587	  by Xsens. Older devices can be accessed using the FTDI_SIO
588	  driver.
589
590	  To compile this driver as a module, choose M here: the
591	  module will be called xsens_mt.
592
593config USB_SERIAL_WISHBONE
594	tristate "USB-Wishbone adapter interface driver"
595	help
596	  Say Y here if you want to use a USB attached Wishbone bus.
597
598	  Wishbone is an open hardware SoC bus commonly used in FPGA
599	  designs. Bus access can be serialized using the Etherbone
600	  protocol <http://www.ohwr.org/projects/etherbone-core>.
601
602	  This driver is intended to be used with devices which attach
603	  their internal Wishbone bus to a USB serial interface using
604	  the Etherbone protocol. A userspace library is required to
605	  speak the protocol made available by this driver as ttyUSBx.
606
607	  To compile this driver as a module, choose M here: the
608	  module will be called wishbone-serial.
609
610config USB_SERIAL_SSU100
611	tristate "USB Quatech SSU-100 Single Port Serial Driver"
612	help
613	  Say Y here if you want to use the Quatech SSU-100 single
614	  port usb to serial adapter.
615
616	  To compile this driver as a module, choose M here: the
617	  module will be called ssu100.
618
619config USB_SERIAL_QT2
620	tristate "USB Quatech Serial Driver for USB 2 devices"
621	help
622	  Say Y here if you want to use the Quatech USB 2
623	  serial adapters.
624
625	  To compile this driver as a module, choose M here: the
626	  module will be called quatech-serial.
627
628config USB_SERIAL_UPD78F0730
629	tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
630	help
631	  Say Y here if you want to use the Renesas uPD78F0730
632	  serial driver.
633
634	  To compile this driver as a module, choose M here: the
635	  module will be called upd78f0730.
636
637config USB_SERIAL_XR
638	tristate "USB MaxLinear/Exar USB to Serial driver"
639	help
640	  Say Y here if you want to use MaxLinear/Exar USB to Serial converter
641	  devices.
642
643	  To compile this driver as a module, choose M here: the
644	  module will be called xr_serial.
645
646config USB_SERIAL_DEBUG
647	tristate "USB Debugging Device"
648	help
649	  Say Y here if you have a USB debugging device used to receive
650	  debugging data from another machine.  The most common of these
651	  devices is the NetChip TurboCONNECT device.
652
653	  To compile this driver as a module, choose M here: the
654	  module will be called usb-debug.
655
656endif # USB_SERIAL
657