1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2010-2011 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * QorIQ RDB boards configuration file 8 */ 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #if defined(CONFIG_TARGET_P1020MBG) 13 #define CONFIG_BOARDNAME "P1020MBG-PC" 14 #define CONFIG_VSC7385_ENET 15 #define CONFIG_SLIC 16 #define __SW_BOOT_MASK 0x03 17 #define __SW_BOOT_NOR 0xe4 18 #define __SW_BOOT_SD 0x54 19 #define CONFIG_SYS_L2_SIZE (256 << 10) 20 #endif 21 22 #if defined(CONFIG_TARGET_P1020UTM) 23 #define CONFIG_BOARDNAME "P1020UTM-PC" 24 #define __SW_BOOT_MASK 0x03 25 #define __SW_BOOT_NOR 0xe0 26 #define __SW_BOOT_SD 0x50 27 #define CONFIG_SYS_L2_SIZE (256 << 10) 28 #endif 29 30 #if defined(CONFIG_TARGET_P1020RDB_PC) 31 #define CONFIG_BOARDNAME "P1020RDB-PC" 32 #define CONFIG_NAND_FSL_ELBC 33 #define CONFIG_VSC7385_ENET 34 #define CONFIG_SLIC 35 #define __SW_BOOT_MASK 0x03 36 #define __SW_BOOT_NOR 0x5c 37 #define __SW_BOOT_SPI 0x1c 38 #define __SW_BOOT_SD 0x9c 39 #define __SW_BOOT_NAND 0xec 40 #define __SW_BOOT_PCIE 0x6c 41 #define CONFIG_SYS_L2_SIZE (256 << 10) 42 #endif 43 44 /* 45 * P1020RDB-PD board has user selectable switches for evaluating different 46 * frequency and boot options for the P1020 device. The table that 47 * follow describe the available options. The front six binary number was in 48 * accordance with SW3[1:6]. 49 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 50 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 51 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 52 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 53 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 54 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 55 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 56 */ 57 #if defined(CONFIG_TARGET_P1020RDB_PD) 58 #define CONFIG_BOARDNAME "P1020RDB-PD" 59 #define CONFIG_NAND_FSL_ELBC 60 #define CONFIG_VSC7385_ENET 61 #define CONFIG_SLIC 62 #define __SW_BOOT_MASK 0x03 63 #define __SW_BOOT_NOR 0x64 64 #define __SW_BOOT_SPI 0x34 65 #define __SW_BOOT_SD 0x24 66 #define __SW_BOOT_NAND 0x44 67 #define __SW_BOOT_PCIE 0x74 68 #define CONFIG_SYS_L2_SIZE (256 << 10) 69 /* 70 * Dynamic MTD Partition support with mtdparts 71 */ 72 #endif 73 74 #if defined(CONFIG_TARGET_P1021RDB) 75 #define CONFIG_BOARDNAME "P1021RDB-PC" 76 #define CONFIG_NAND_FSL_ELBC 77 #define CONFIG_QE 78 #define CONFIG_VSC7385_ENET 79 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 80 addresses in the LBC */ 81 #define __SW_BOOT_MASK 0x03 82 #define __SW_BOOT_NOR 0x5c 83 #define __SW_BOOT_SPI 0x1c 84 #define __SW_BOOT_SD 0x9c 85 #define __SW_BOOT_NAND 0xec 86 #define __SW_BOOT_PCIE 0x6c 87 #define CONFIG_SYS_L2_SIZE (256 << 10) 88 /* 89 * Dynamic MTD Partition support with mtdparts 90 */ 91 #endif 92 93 #if defined(CONFIG_TARGET_P1024RDB) 94 #define CONFIG_BOARDNAME "P1024RDB" 95 #define CONFIG_NAND_FSL_ELBC 96 #define CONFIG_SLIC 97 #define __SW_BOOT_MASK 0xf3 98 #define __SW_BOOT_NOR 0x00 99 #define __SW_BOOT_SPI 0x08 100 #define __SW_BOOT_SD 0x04 101 #define __SW_BOOT_NAND 0x0c 102 #define CONFIG_SYS_L2_SIZE (256 << 10) 103 #endif 104 105 #if defined(CONFIG_TARGET_P1025RDB) 106 #define CONFIG_BOARDNAME "P1025RDB" 107 #define CONFIG_NAND_FSL_ELBC 108 #define CONFIG_QE 109 #define CONFIG_SLIC 110 111 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 112 addresses in the LBC */ 113 #define __SW_BOOT_MASK 0xf3 114 #define __SW_BOOT_NOR 0x00 115 #define __SW_BOOT_SPI 0x08 116 #define __SW_BOOT_SD 0x04 117 #define __SW_BOOT_NAND 0x0c 118 #define CONFIG_SYS_L2_SIZE (256 << 10) 119 #endif 120 121 #if defined(CONFIG_TARGET_P2020RDB) 122 #define CONFIG_BOARDNAME "P2020RDB-PC" 123 #define CONFIG_NAND_FSL_ELBC 124 #define CONFIG_VSC7385_ENET 125 #define __SW_BOOT_MASK 0x03 126 #define __SW_BOOT_NOR 0xc8 127 #define __SW_BOOT_SPI 0x28 128 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 129 #define __SW_BOOT_NAND 0xe8 130 #define __SW_BOOT_PCIE 0xa8 131 #define CONFIG_SYS_L2_SIZE (512 << 10) 132 /* 133 * Dynamic MTD Partition support with mtdparts 134 */ 135 #endif 136 137 #ifdef CONFIG_SDCARD 138 #define CONFIG_SPL_FLUSH_IMAGE 139 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 140 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 141 #define CONFIG_SPL_PAD_TO 0x20000 142 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 143 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 144 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 145 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 146 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 147 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 148 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 149 #define CONFIG_SPL_MMC_BOOT 150 #ifdef CONFIG_SPL_BUILD 151 #define CONFIG_SPL_COMMON_INIT_DDR 152 #endif 153 #endif 154 155 #ifdef CONFIG_SPIFLASH 156 #define CONFIG_SPL_SPI_FLASH_MINIMAL 157 #define CONFIG_SPL_FLUSH_IMAGE 158 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 159 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 160 #define CONFIG_SPL_PAD_TO 0x20000 161 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 162 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 163 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 164 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 165 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 166 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 167 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 168 #define CONFIG_SPL_SPI_BOOT 169 #ifdef CONFIG_SPL_BUILD 170 #define CONFIG_SPL_COMMON_INIT_DDR 171 #endif 172 #endif 173 174 #ifdef CONFIG_NAND 175 #ifdef CONFIG_TPL_BUILD 176 #define CONFIG_SPL_NAND_BOOT 177 #define CONFIG_SPL_FLUSH_IMAGE 178 #define CONFIG_SPL_NAND_INIT 179 #define CONFIG_SPL_COMMON_INIT_DDR 180 #define CONFIG_SPL_MAX_SIZE (128 << 10) 181 #define CONFIG_TPL_TEXT_BASE 0xf8f81000 182 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 183 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 184 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 185 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 186 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 187 #elif defined(CONFIG_SPL_BUILD) 188 #define CONFIG_SPL_INIT_MINIMAL 189 #define CONFIG_SPL_FLUSH_IMAGE 190 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 191 #define CONFIG_SPL_TEXT_BASE 0xff800000 192 #define CONFIG_SPL_MAX_SIZE 4096 193 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 194 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 195 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 196 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 197 #endif /* not CONFIG_TPL_BUILD */ 198 199 #define CONFIG_SPL_PAD_TO 0x20000 200 #define CONFIG_TPL_PAD_TO 0x20000 201 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 202 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 203 #endif 204 205 #ifndef CONFIG_RESET_VECTOR_ADDRESS 206 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 207 #endif 208 209 #ifndef CONFIG_SYS_MONITOR_BASE 210 #ifdef CONFIG_TPL_BUILD 211 #define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE 212 #elif defined(CONFIG_SPL_BUILD) 213 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 214 #else 215 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 216 #endif 217 #endif 218 219 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 220 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 221 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 222 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 223 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 224 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 225 226 #define CONFIG_ENV_OVERWRITE 227 228 #define CONFIG_SYS_SATA_MAX_DEVICE 2 229 #define CONFIG_LBA48 230 231 #if defined(CONFIG_TARGET_P2020RDB) 232 #define CONFIG_SYS_CLK_FREQ 100000000 233 #else 234 #define CONFIG_SYS_CLK_FREQ 66666666 235 #endif 236 #define CONFIG_DDR_CLK_FREQ 66666666 237 238 #define CONFIG_HWCONFIG 239 /* 240 * These can be toggled for performance analysis, otherwise use default. 241 */ 242 #define CONFIG_L2_CACHE 243 #define CONFIG_BTB 244 245 #define CONFIG_ENABLE_36BIT_PHYS 246 247 #ifdef CONFIG_PHYS_64BIT 248 #define CONFIG_ADDR_MAP 1 249 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 250 #endif 251 252 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 253 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 254 255 #define CONFIG_SYS_CCSRBAR 0xffe00000 256 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 257 258 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 259 SPL code*/ 260 #ifdef CONFIG_SPL_BUILD 261 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 262 #endif 263 264 /* DDR Setup */ 265 #define CONFIG_SYS_DDR_RAW_TIMING 266 #define CONFIG_DDR_SPD 267 #define CONFIG_SYS_SPD_BUS_NUM 1 268 #define SPD_EEPROM_ADDRESS 0x52 269 270 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 271 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 272 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 273 #else 274 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 275 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 276 #endif 277 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 278 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 279 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 280 281 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 282 283 /* Default settings for DDR3 */ 284 #ifndef CONFIG_TARGET_P2020RDB 285 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 286 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 287 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 288 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 289 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 290 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 291 292 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 293 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 294 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 295 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 296 297 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 298 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 299 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 300 #define CONFIG_SYS_DDR_RCW_1 0x00000000 301 #define CONFIG_SYS_DDR_RCW_2 0x00000000 302 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 303 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 304 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 305 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 306 307 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 308 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 309 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 310 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 311 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 312 #define CONFIG_SYS_DDR_MODE_1 0x40461520 313 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 314 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 315 #endif 316 317 #undef CONFIG_CLOCKS_IN_MHZ 318 319 /* 320 * Memory map 321 * 322 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 323 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 324 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 325 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 326 * (early boot only) 327 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 328 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 329 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 330 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 331 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 332 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 333 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 334 */ 335 336 /* 337 * Local Bus Definitions 338 */ 339 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 340 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 341 #define CONFIG_SYS_FLASH_BASE 0xec000000 342 #elif defined(CONFIG_TARGET_P1020UTM) 343 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 344 #define CONFIG_SYS_FLASH_BASE 0xee000000 345 #else 346 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 347 #define CONFIG_SYS_FLASH_BASE 0xef000000 348 #endif 349 350 #ifdef CONFIG_PHYS_64BIT 351 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 352 #else 353 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 354 #endif 355 356 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 357 | BR_PS_16 | BR_V) 358 359 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 360 361 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 362 #define CONFIG_SYS_FLASH_QUIET_TEST 363 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 364 365 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 366 367 #undef CONFIG_SYS_FLASH_CHECKSUM 368 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 369 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 370 371 #define CONFIG_SYS_FLASH_EMPTY_INFO 372 373 /* Nand Flash */ 374 #ifdef CONFIG_NAND_FSL_ELBC 375 #define CONFIG_SYS_NAND_BASE 0xff800000 376 #ifdef CONFIG_PHYS_64BIT 377 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 378 #else 379 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 380 #endif 381 382 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 383 #define CONFIG_SYS_MAX_NAND_DEVICE 1 384 #if defined(CONFIG_TARGET_P1020RDB_PD) 385 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 386 #else 387 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 388 #endif 389 390 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 391 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 392 | BR_PS_8 /* Port Size = 8 bit */ \ 393 | BR_MS_FCM /* MSEL = FCM */ \ 394 | BR_V) /* valid */ 395 #if defined(CONFIG_TARGET_P1020RDB_PD) 396 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 397 | OR_FCM_PGS /* Large Page*/ \ 398 | OR_FCM_CSCT \ 399 | OR_FCM_CST \ 400 | OR_FCM_CHT \ 401 | OR_FCM_SCY_1 \ 402 | OR_FCM_TRLX \ 403 | OR_FCM_EHTR) 404 #else 405 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 406 | OR_FCM_CSCT \ 407 | OR_FCM_CST \ 408 | OR_FCM_CHT \ 409 | OR_FCM_SCY_1 \ 410 | OR_FCM_TRLX \ 411 | OR_FCM_EHTR) 412 #endif 413 #endif /* CONFIG_NAND_FSL_ELBC */ 414 415 #define CONFIG_SYS_INIT_RAM_LOCK 416 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 417 #ifdef CONFIG_PHYS_64BIT 418 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 420 /* The assembler doesn't like typecast */ 421 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 422 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 423 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 424 #else 425 /* Initial L1 address */ 426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 427 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 428 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 429 #endif 430 /* Size of used area in RAM */ 431 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 432 433 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 434 GENERATED_GBL_DATA_SIZE) 435 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 436 437 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 438 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 439 440 #define CONFIG_SYS_CPLD_BASE 0xffa00000 441 #ifdef CONFIG_PHYS_64BIT 442 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 443 #else 444 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 445 #endif 446 /* CPLD config size: 1Mb */ 447 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 448 BR_PS_8 | BR_V) 449 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 450 451 #define CONFIG_SYS_PMC_BASE 0xff980000 452 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 453 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 454 BR_PS_8 | BR_V) 455 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 456 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 457 OR_GPCM_EAD) 458 459 #ifdef CONFIG_NAND 460 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 461 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 462 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 463 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 464 #else 465 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 466 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 467 #ifdef CONFIG_NAND_FSL_ELBC 468 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 469 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 470 #endif 471 #endif 472 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 473 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 474 475 /* Vsc7385 switch */ 476 #ifdef CONFIG_VSC7385_ENET 477 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 478 479 #ifdef CONFIG_PHYS_64BIT 480 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 481 #else 482 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 483 #endif 484 485 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 486 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 487 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 488 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 489 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 490 491 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 492 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 493 494 /* The size of the VSC7385 firmware image */ 495 #define CONFIG_VSC7385_IMAGE_SIZE 8192 496 #endif 497 498 /* 499 * Config the L2 Cache as L2 SRAM 500 */ 501 #if defined(CONFIG_SPL_BUILD) 502 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 503 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 504 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 505 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 506 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 507 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 508 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 509 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 510 #if defined(CONFIG_TARGET_P2020RDB) 511 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 512 #else 513 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 514 #endif 515 #elif defined(CONFIG_NAND) 516 #ifdef CONFIG_TPL_BUILD 517 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 518 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 519 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 520 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 521 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 522 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 523 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 524 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 525 #else 526 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 527 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 528 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 529 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 530 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 531 #endif /* CONFIG_TPL_BUILD */ 532 #endif 533 #endif 534 535 /* Serial Port - controlled on board with jumper J8 536 * open - index 2 537 * shorted - index 1 538 */ 539 #undef CONFIG_SERIAL_SOFTWARE_FIFO 540 #define CONFIG_SYS_NS16550_SERIAL 541 #define CONFIG_SYS_NS16550_REG_SIZE 1 542 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 543 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 544 #define CONFIG_NS16550_MIN_FUNCTIONS 545 #endif 546 547 #define CONFIG_SYS_BAUDRATE_TABLE \ 548 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 549 550 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 551 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 552 553 /* I2C */ 554 #define CONFIG_SYS_I2C 555 #define CONFIG_SYS_I2C_FSL 556 #define CONFIG_SYS_FSL_I2C_SPEED 400000 557 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 558 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 559 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 560 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 561 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 562 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 563 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 564 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 565 566 /* 567 * I2C2 EEPROM 568 */ 569 #undef CONFIG_ID_EEPROM 570 571 #define CONFIG_RTC_PT7C4338 572 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 573 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 574 575 /* enable read and write access to EEPROM */ 576 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 577 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 578 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 579 580 #if defined(CONFIG_PCI) 581 /* 582 * General PCI 583 * Memory space is mapped 1-1, but I/O space must start from 0. 584 */ 585 586 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 587 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 588 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 589 #ifdef CONFIG_PHYS_64BIT 590 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 591 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 592 #else 593 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 594 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 595 #endif 596 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 597 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 598 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 599 #ifdef CONFIG_PHYS_64BIT 600 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 601 #else 602 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 603 #endif 604 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 605 606 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 607 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 608 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 609 #ifdef CONFIG_PHYS_64BIT 610 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 611 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 612 #else 613 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 614 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 615 #endif 616 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 617 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 618 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 619 #ifdef CONFIG_PHYS_64BIT 620 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 621 #else 622 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 623 #endif 624 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 625 626 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 627 #endif /* CONFIG_PCI */ 628 629 #if defined(CONFIG_TSEC_ENET) 630 #define CONFIG_TSEC1 631 #define CONFIG_TSEC1_NAME "eTSEC1" 632 #define CONFIG_TSEC2 633 #define CONFIG_TSEC2_NAME "eTSEC2" 634 #define CONFIG_TSEC3 635 #define CONFIG_TSEC3_NAME "eTSEC3" 636 637 #define TSEC1_PHY_ADDR 2 638 #define TSEC2_PHY_ADDR 0 639 #define TSEC3_PHY_ADDR 1 640 641 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 642 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 643 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 644 645 #define TSEC1_PHYIDX 0 646 #define TSEC2_PHYIDX 0 647 #define TSEC3_PHYIDX 0 648 649 #define CONFIG_ETHPRIME "eTSEC1" 650 651 #define CONFIG_HAS_ETH0 652 #define CONFIG_HAS_ETH1 653 #define CONFIG_HAS_ETH2 654 #endif /* CONFIG_TSEC_ENET */ 655 656 #ifdef CONFIG_QE 657 /* QE microcode/firmware address */ 658 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 659 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 660 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 661 #endif /* CONFIG_QE */ 662 663 #ifdef CONFIG_TARGET_P1025RDB 664 /* 665 * QE UEC ethernet configuration 666 */ 667 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 668 669 #undef CONFIG_UEC_ETH 670 #define CONFIG_PHY_MODE_NEED_CHANGE 671 672 #define CONFIG_UEC_ETH1 /* ETH1 */ 673 #define CONFIG_HAS_ETH0 674 675 #ifdef CONFIG_UEC_ETH1 676 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 677 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 678 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 679 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 680 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 681 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 682 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 683 #endif /* CONFIG_UEC_ETH1 */ 684 685 #define CONFIG_UEC_ETH5 /* ETH5 */ 686 #define CONFIG_HAS_ETH1 687 688 #ifdef CONFIG_UEC_ETH5 689 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 690 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 691 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 692 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 693 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 694 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 695 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 696 #endif /* CONFIG_UEC_ETH5 */ 697 #endif /* CONFIG_TARGET_P1025RDB */ 698 699 /* 700 * Environment 701 */ 702 #ifdef CONFIG_SPIFLASH 703 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 704 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 705 #define CONFIG_ENV_SECT_SIZE 0x10000 706 #elif defined(CONFIG_SDCARD) 707 #define CONFIG_FSL_FIXED_MMC_LOCATION 708 #define CONFIG_ENV_SIZE 0x2000 709 #define CONFIG_SYS_MMC_ENV_DEV 0 710 #elif defined(CONFIG_NAND) 711 #ifdef CONFIG_TPL_BUILD 712 #define CONFIG_ENV_SIZE 0x2000 713 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 714 #else 715 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 716 #endif 717 #define CONFIG_ENV_OFFSET (1024 * 1024) 718 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 719 #elif defined(CONFIG_SYS_RAMBOOT) 720 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 721 #define CONFIG_ENV_SIZE 0x2000 722 #else 723 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 724 #define CONFIG_ENV_SIZE 0x2000 725 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 726 #endif 727 728 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 729 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 730 731 /* 732 * USB 733 */ 734 #define CONFIG_HAS_FSL_DR_USB 735 736 #if defined(CONFIG_HAS_FSL_DR_USB) 737 #ifdef CONFIG_USB_EHCI_HCD 738 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 739 #define CONFIG_USB_EHCI_FSL 740 #endif 741 #endif 742 743 #if defined(CONFIG_TARGET_P1020RDB_PD) 744 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 745 #endif 746 747 #ifdef CONFIG_MMC 748 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 749 #endif 750 751 #undef CONFIG_WATCHDOG /* watchdog disabled */ 752 753 /* 754 * Miscellaneous configurable options 755 */ 756 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 757 758 /* 759 * For booting Linux, the board info and command line data 760 * have to be in the first 64 MB of memory, since this is 761 * the maximum mapped by the Linux kernel during initialization. 762 */ 763 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 764 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 765 766 #if defined(CONFIG_CMD_KGDB) 767 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 768 #endif 769 770 /* 771 * Environment Configuration 772 */ 773 #define CONFIG_HOSTNAME "unknown" 774 #define CONFIG_ROOTPATH "/opt/nfsroot" 775 #define CONFIG_BOOTFILE "uImage" 776 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 777 778 /* default location for tftp and bootm */ 779 #define CONFIG_LOADADDR 1000000 780 781 #ifdef __SW_BOOT_NOR 782 #define __NOR_RST_CMD \ 783 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 784 i2c mw 18 3 __SW_BOOT_MASK 1; reset 785 #endif 786 #ifdef __SW_BOOT_SPI 787 #define __SPI_RST_CMD \ 788 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 789 i2c mw 18 3 __SW_BOOT_MASK 1; reset 790 #endif 791 #ifdef __SW_BOOT_SD 792 #define __SD_RST_CMD \ 793 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 794 i2c mw 18 3 __SW_BOOT_MASK 1; reset 795 #endif 796 #ifdef __SW_BOOT_NAND 797 #define __NAND_RST_CMD \ 798 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 799 i2c mw 18 3 __SW_BOOT_MASK 1; reset 800 #endif 801 #ifdef __SW_BOOT_PCIE 802 #define __PCIE_RST_CMD \ 803 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 804 i2c mw 18 3 __SW_BOOT_MASK 1; reset 805 #endif 806 807 #define CONFIG_EXTRA_ENV_SETTINGS \ 808 "netdev=eth0\0" \ 809 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 810 "loadaddr=1000000\0" \ 811 "bootfile=uImage\0" \ 812 "tftpflash=tftpboot $loadaddr $uboot; " \ 813 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 814 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 815 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 816 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 817 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 818 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 819 "consoledev=ttyS0\0" \ 820 "ramdiskaddr=2000000\0" \ 821 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 822 "fdtaddr=1e00000\0" \ 823 "bdev=sda1\0" \ 824 "jffs2nor=mtdblock3\0" \ 825 "norbootaddr=ef080000\0" \ 826 "norfdtaddr=ef040000\0" \ 827 "jffs2nand=mtdblock9\0" \ 828 "nandbootaddr=100000\0" \ 829 "nandfdtaddr=80000\0" \ 830 "ramdisk_size=120000\0" \ 831 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 832 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 833 __stringify(__NOR_RST_CMD)"\0" \ 834 __stringify(__SPI_RST_CMD)"\0" \ 835 __stringify(__SD_RST_CMD)"\0" \ 836 __stringify(__NAND_RST_CMD)"\0" \ 837 __stringify(__PCIE_RST_CMD)"\0" 838 839 #define CONFIG_NFSBOOTCOMMAND \ 840 "setenv bootargs root=/dev/nfs rw " \ 841 "nfsroot=$serverip:$rootpath " \ 842 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 843 "console=$consoledev,$baudrate $othbootargs;" \ 844 "tftp $loadaddr $bootfile;" \ 845 "tftp $fdtaddr $fdtfile;" \ 846 "bootm $loadaddr - $fdtaddr" 847 848 #define CONFIG_HDBOOT \ 849 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 850 "console=$consoledev,$baudrate $othbootargs;" \ 851 "usb start;" \ 852 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 853 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 854 "bootm $loadaddr - $fdtaddr" 855 856 #define CONFIG_USB_FAT_BOOT \ 857 "setenv bootargs root=/dev/ram rw " \ 858 "console=$consoledev,$baudrate $othbootargs " \ 859 "ramdisk_size=$ramdisk_size;" \ 860 "usb start;" \ 861 "fatload usb 0:2 $loadaddr $bootfile;" \ 862 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 863 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 864 "bootm $loadaddr $ramdiskaddr $fdtaddr" 865 866 #define CONFIG_USB_EXT2_BOOT \ 867 "setenv bootargs root=/dev/ram rw " \ 868 "console=$consoledev,$baudrate $othbootargs " \ 869 "ramdisk_size=$ramdisk_size;" \ 870 "usb start;" \ 871 "ext2load usb 0:4 $loadaddr $bootfile;" \ 872 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 873 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 874 "bootm $loadaddr $ramdiskaddr $fdtaddr" 875 876 #define CONFIG_NORBOOT \ 877 "setenv bootargs root=/dev/$jffs2nor rw " \ 878 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 879 "bootm $norbootaddr - $norfdtaddr" 880 881 #define CONFIG_RAMBOOTCOMMAND \ 882 "setenv bootargs root=/dev/ram rw " \ 883 "console=$consoledev,$baudrate $othbootargs " \ 884 "ramdisk_size=$ramdisk_size;" \ 885 "tftp $ramdiskaddr $ramdiskfile;" \ 886 "tftp $loadaddr $bootfile;" \ 887 "tftp $fdtaddr $fdtfile;" \ 888 "bootm $loadaddr $ramdiskaddr $fdtaddr" 889 890 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 891 892 #endif /* __CONFIG_H */ 893