1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * (C) Copyright 2000-2009
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 */
6
7 #ifndef __COMMON_H_
8 #define __COMMON_H_ 1
9
10 #ifndef __ASSEMBLY__ /* put C only stuff in this section */
11
12 typedef unsigned char uchar;
13 typedef volatile unsigned long vu_long;
14 typedef volatile unsigned short vu_short;
15 typedef volatile unsigned char vu_char;
16
17 #include <config.h>
18 #include <errno.h>
19 #include <time.h>
20 #include <asm-offsets.h>
21 #include <linux/bitops.h>
22 #include <linux/bug.h>
23 #include <linux/delay.h>
24 #include <linux/types.h>
25 #include <linux/printk.h>
26 #include <linux/string.h>
27 #include <linux/stringify.h>
28 #include <asm/ptrace.h>
29 #include <stdarg.h>
30 #include <stdio.h>
31 #include <linux/kernel.h>
32
33 #include <part.h>
34 #include <flash.h>
35 #include <image.h>
36
37 #ifdef __LP64__
38 #define CONFIG_SYS_SUPPORT_64BIT_DATA
39 #endif
40
41 #include <log.h>
42
43 typedef void (interrupt_handler_t)(void *);
44
45 #include <asm/u-boot.h> /* boot information for Linux kernel */
46 #include <asm/global_data.h> /* global data used for startup functions */
47
48 #if defined(CONFIG_ENV_IS_EMBEDDED)
49 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
51 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
52 defined(CONFIG_ENV_IS_IN_NVRAM)
53 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
54 #else
55 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
56 #endif
57
58 /* startup functions, used in:
59 * common/board_f.c
60 * common/init/board_init.c
61 * common/board_r.c
62 * common/board_info.c
63 */
64 #include <init.h>
65
66 /*
67 * Function Prototypes
68 */
69 void hang (void) __attribute__ ((noreturn));
70
71 int cpu_init(void);
72
73 #include <display_options.h>
74
75 /* common/main.c */
76 void main_loop (void);
77 int run_command(const char *cmd, int flag);
78 int run_command_repeatable(const char *cmd, int flag);
79
80 /**
81 * Run a list of commands separated by ; or even \0
82 *
83 * Note that if 'len' is not -1, then the command does not need to be nul
84 * terminated, Memory will be allocated for the command in that case.
85 *
86 * @param cmd List of commands to run, each separated bu semicolon
87 * @param len Length of commands excluding terminator if known (-1 if not)
88 * @param flag Execution flags (CMD_FLAG_...)
89 * @return 0 on success, or != 0 on error.
90 */
91 int run_command_list(const char *cmd, int len, int flag);
92
93 int checkflash(void);
94 int checkdram(void);
95 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
97 int mdm_init(void);
98
99 /**
100 * Show the DRAM size in a board-specific way
101 *
102 * This is used by boards to display DRAM information in their own way.
103 *
104 * @param size Size of DRAM (which should be displayed along with other info)
105 */
106 void board_show_dram(phys_size_t size);
107
108 /**
109 * Get the uppermost pointer that is valid to access
110 *
111 * Some systems may not map all of their address space. This function allows
112 * boards to indicate what their highest support pointer value is for DRAM
113 * access.
114 *
115 * @param total_size Size of U-Boot (unused?)
116 */
117 ulong board_get_usable_ram_top(ulong total_size);
118
119 /**
120 * arch_fixup_fdt() - Write arch-specific information to fdt
121 *
122 * Defined in arch/$(ARCH)/lib/bootm-fdt.c
123 *
124 * @blob: FDT blob to write to
125 * @return 0 if ok, or -ve FDT_ERR_... on failure
126 */
127 int arch_fixup_fdt(void *blob);
128
129 /* common/flash.c */
130 void flash_perror (int);
131
132 /* common/cmd_source.c */
133 int source (ulong addr, const char *fit_uname);
134
135 extern ulong load_addr; /* Default Load Address */
136 extern ulong save_addr; /* Default Save Address */
137 extern ulong save_size; /* Default Save Size */
138
139 /* common/cmd_net.c */
140 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
141
142 /* common/cmd_fat.c */
143 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
144
145 /* common/cmd_ext2.c */
146 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
147
148 /* common/cmd_nvedit.c */
149 int env_init (void);
150 void env_relocate (void);
151 int envmatch (uchar *, int);
152
153 /**
154 * env_get() - Look up the value of an environment variable
155 *
156 * In U-Boot proper this can be called before relocation (which is when the
157 * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that
158 * case this function calls env_get_f().
159 *
160 * @varname: Variable to look up
161 * @return value of variable, or NULL if not found
162 */
163 char *env_get(const char *varname);
164
165 /**
166 * env_get_f() - Look up the value of an environment variable (early)
167 *
168 * This function is called from env_get() if the environment has not been
169 * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will
170 * support reading the value (slowly) and some will not.
171 *
172 * @varname: Variable to look up
173 * @return value of variable, or NULL if not found
174 */
175 int env_get_f(const char *name, char *buf, unsigned len);
176
177 /**
178 * env_get_ulong() - Return an environment variable as an integer value
179 *
180 * Most U-Boot environment variables store hex values. For those which store
181 * (e.g.) base-10 integers, this function can be used to read the value.
182 *
183 * @name: Variable to look up
184 * @base: Base to use (e.g. 10 for base 10, 2 for binary)
185 * @default_val: Default value to return if no value is found
186 * @return the value found, or @default_val if none
187 */
188 ulong env_get_ulong(const char *name, int base, ulong default_val);
189
190 /**
191 * env_get_hex() - Return an environment variable as a hex value
192 *
193 * Decode an environment as a hex number (it may or may not have a 0x
194 * prefix). If the environment variable cannot be found, or does not start
195 * with hex digits, the default value is returned.
196 *
197 * @varname: Variable to decode
198 * @default_val: Value to return on error
199 */
200 ulong env_get_hex(const char *varname, ulong default_val);
201
202 /*
203 * Read an environment variable as a boolean
204 * Return -1 if variable does not exist (default to true)
205 */
206 int env_get_yesno(const char *var);
207
208 /**
209 * env_set() - set an environment variable
210 *
211 * This sets or deletes the value of an environment variable. For setting the
212 * value the variable is created if it does not already exist.
213 *
214 * @varname: Variable to adjust
215 * @value: Value to set for the variable, or NULL or "" to delete the variable
216 * @return 0 if OK, 1 on error
217 */
218 int env_set(const char *varname, const char *value);
219
220 /**
221 * env_set_ulong() - set an environment variable to an integer
222 *
223 * @varname: Variable to adjust
224 * @value: Value to set for the variable (will be converted to a string)
225 * @return 0 if OK, 1 on error
226 */
227 int env_set_ulong(const char *varname, ulong value);
228
229 /**
230 * env_set_hex() - set an environment variable to a hex value
231 *
232 * @varname: Variable to adjust
233 * @value: Value to set for the variable (will be converted to a hex string)
234 * @return 0 if OK, 1 on error
235 */
236 int env_set_hex(const char *varname, ulong value);
237
238 /**
239 * env_set_addr - Set an environment variable to an address in hex
240 *
241 * @varname: Environment variable to set
242 * @addr: Value to set it to
243 * @return 0 if ok, 1 on error
244 */
env_set_addr(const char * varname,const void * addr)245 static inline int env_set_addr(const char *varname, const void *addr)
246 {
247 return env_set_hex(varname, (ulong)addr);
248 }
249
250 #ifdef CONFIG_AUTO_COMPLETE
251 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf,
252 bool dollar_comp);
253 #endif
254 int get_env_id (void);
255
256 void pci_init_board(void);
257
258 /* common/exports.c */
259 void jumptable_init(void);
260
261 /* common/kallsysm.c */
262 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
263
264 /* common/memsize.c */
265 long get_ram_size (long *, long);
266 phys_size_t get_effective_memsize(void);
267
268 /* $(BOARD)/$(BOARD).c */
269 void reset_phy (void);
270 void fdc_hw_init (void);
271
272 /* $(BOARD)/eeprom.c */
273 #ifdef CONFIG_CMD_EEPROM
274 void eeprom_init (int bus);
275 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
276 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
277 #else
278 /*
279 * Some EEPROM code is depecated because it used the legacy I2C interface. Add
280 * some macros here so we don't have to touch every one of those uses
281 */
282 #define eeprom_init(bus)
283 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
284 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
285 #endif
286
287 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
288 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
289 #endif
290
291 /* $(BOARD)/$(BOARD).c */
292 int board_early_init_f (void);
293 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
294 int board_late_init (void);
295 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
296 int board_early_init_r (void);
297
298 #if defined(CONFIG_SYS_DRAM_TEST)
299 int testdram(void);
300 #endif /* CONFIG_SYS_DRAM_TEST */
301
302 /* $(CPU)/start.S */
303 int icache_status (void);
304 void icache_enable (void);
305 void icache_disable(void);
306 int dcache_status (void);
307 void dcache_enable (void);
308 void dcache_disable(void);
309 void mmu_disable(void);
310 #if defined(CONFIG_ARM)
311 void relocate_code(ulong);
312 #else
313 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
314 #endif
315 ulong get_endaddr (void);
316 void trap_init (ulong);
317
318 /* $(CPU)/cpu.c */
cpumask_next(int cpu,unsigned int mask)319 static inline int cpumask_next(int cpu, unsigned int mask)
320 {
321 for (cpu++; !((1 << cpu) & mask); cpu++)
322 ;
323
324 return cpu;
325 }
326
327 #define for_each_cpu(iter, cpu, num_cpus, mask) \
328 for (iter = 0, cpu = cpumask_next(-1, mask); \
329 iter < num_cpus; \
330 iter++, cpu = cpumask_next(cpu, mask)) \
331
332 int cpu_numcores (void);
333 int cpu_num_dspcores(void);
334 u32 cpu_mask (void);
335 u32 cpu_dsp_mask(void);
336 int is_core_valid (unsigned int);
337
338 void s_init(void);
339
340 int checkcpu (void);
341 int checkicache (void);
342 int checkdcache (void);
343 void upmconfig (unsigned int, unsigned int *, unsigned int);
344 ulong get_tbclk (void);
345 void reset_misc (void);
346 void reset_cpu (ulong addr);
347 void ft_cpu_setup(void *blob, bd_t *bd);
348 void ft_pci_setup(void *blob, bd_t *bd);
349
350 void smp_set_core_boot_addr(unsigned long addr, int corenr);
351 void smp_kick_all_cpus(void);
352
353 /* $(CPU)/serial.c */
354 int serial_init (void);
355 void serial_setbrg (void);
356 void serial_putc (const char);
357 void serial_putc_raw(const char);
358 void serial_puts (const char *);
359 int serial_getc (void);
360 int serial_tstc (void);
361
362 /* $(CPU)/speed.c */
363 int get_clocks (void);
364 ulong get_bus_freq (ulong);
365 int get_serial_clock(void);
366
367 /* $(CPU)/interrupts.c */
368 int interrupt_init (void);
369 void timer_interrupt (struct pt_regs *);
370 void external_interrupt (struct pt_regs *);
371 void irq_install_handler(int, interrupt_handler_t *, void *);
372 void irq_free_handler (int);
373 void reset_timer (void);
374
375 /* Return value of monotonic microsecond timer */
376 unsigned long timer_get_us(void);
377
378 void enable_interrupts (void);
379 int disable_interrupts (void);
380
381 /* $(CPU)/.../commproc.c */
382 int dpram_init (void);
383 uint dpram_base(void);
384 uint dpram_base_align(uint align);
385 uint dpram_alloc(uint size);
386 uint dpram_alloc_align(uint size,uint align);
387 void bootcount_store (ulong);
388 ulong bootcount_load (void);
389
390 /* $(CPU)/.../<eth> */
391 void mii_init (void);
392
393 /* $(CPU)/.../lcd.c */
394 ulong lcd_setmem (ulong);
395
396 /* $(CPU)/.../video.c */
397 ulong video_setmem (ulong);
398
399 /* arch/$(ARCH)/lib/cache.c */
400 void enable_caches(void);
401 void flush_cache (unsigned long, unsigned long);
402 void flush_dcache_all(void);
403 void flush_dcache_range(unsigned long start, unsigned long stop);
404 void invalidate_dcache_range(unsigned long start, unsigned long stop);
405 void invalidate_dcache_all(void);
406 void invalidate_icache_all(void);
407
408 enum {
409 /* Disable caches (else flush caches but leave them active) */
410 CBL_DISABLE_CACHES = 1 << 0,
411 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
412
413 CBL_ALL = 3,
414 };
415
416 /**
417 * Clean up ready for linux
418 *
419 * @param flags Flags to control what is done
420 */
421 int cleanup_before_linux_select(int flags);
422
423 /* arch/$(ARCH)/lib/ticks.S */
424 uint64_t get_ticks(void);
425 void wait_ticks (unsigned long);
426
427 /* arch/$(ARCH)/lib/time.c */
428 ulong usec2ticks (unsigned long usec);
429 ulong ticks2usec (unsigned long ticks);
430
431 /* lib/gunzip.c */
432 int gzip_parse_header(const unsigned char *src, unsigned long len);
433 int gunzip(void *, int, unsigned char *, unsigned long *);
434 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
435 int stoponerr, int offset);
436
437 /**
438 * gzwrite progress indicators: defined weak to allow board-specific
439 * overrides:
440 *
441 * gzwrite_progress_init called on startup
442 * gzwrite_progress called during decompress/write loop
443 * gzwrite_progress_finish called at end of loop to
444 * indicate success (retcode=0) or failure
445 */
446 void gzwrite_progress_init(u64 expected_size);
447
448 void gzwrite_progress(int iteration,
449 u64 bytes_written,
450 u64 total_bytes);
451
452 void gzwrite_progress_finish(int retcode,
453 u64 totalwritten,
454 u64 totalsize,
455 u32 expected_crc,
456 u32 calculated_crc);
457
458 /**
459 * decompress and write gzipped image from memory to block device
460 *
461 * @param src compressed image address
462 * @param len compressed image length in bytes
463 * @param dev block device descriptor
464 * @param szwritebuf bytes per write (pad to erase size)
465 * @param startoffs offset in bytes of first write
466 * @param szexpected expected uncompressed length
467 * may be zero to use gzip trailer
468 * for files under 4GiB
469 */
470 int gzwrite(unsigned char *src, int len,
471 struct blk_desc *dev,
472 unsigned long szwritebuf,
473 u64 startoffs,
474 u64 szexpected);
475
476 /* lib/lz4_wrapper.c */
477 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
478
479 /* lib/qsort.c */
480 void qsort(void *base, size_t nmemb, size_t size,
481 int(*compar)(const void *, const void *));
482 int strcmp_compar(const void *, const void *);
483
484 /* lib/uuid.c */
485 #include <uuid.h>
486
487 /* lib/vsprintf.c */
488 #include <vsprintf.h>
489
490 /* lib/strmhz.c */
491 char * strmhz(char *buf, unsigned long hz);
492
493 /* lib/crc32.c */
494 #include <u-boot/crc.h>
495
496 /* lib/rand.c */
497 #define RAND_MAX -1U
498 void srand(unsigned int seed);
499 unsigned int rand(void);
500 unsigned int rand_r(unsigned int *seedp);
501
502 /*
503 * STDIO based functions (can always be used)
504 */
505 /* serial stuff */
506 int serial_printf (const char *fmt, ...)
507 __attribute__ ((format (__printf__, 1, 2)));
508
509 /* lib/gzip.c */
510 int gzip(void *dst, unsigned long *lenp,
511 unsigned char *src, unsigned long srclen);
512 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
513 unsigned long srclen, int stoponerr,
514 int (*func)(unsigned long, unsigned long));
515
516 /* lib/net_utils.c */
517 #include <net.h>
env_get_ip(char * var)518 static inline struct in_addr env_get_ip(char *var)
519 {
520 return string_to_ip(env_get(var));
521 }
522
523 int pcmcia_init (void);
524
525 #ifdef CONFIG_LED_STATUS
526 # include <status_led.h>
527 #endif
528
529 #include <bootstage.h>
530
531 #ifdef CONFIG_SHOW_ACTIVITY
532 void show_activity(int arg);
533 #endif
534
535 /* Multicore arch functions */
536 #ifdef CONFIG_MP
537 int cpu_status(u32 nr);
538 int cpu_reset(u32 nr);
539 int cpu_disable(u32 nr);
540 int cpu_release(u32 nr, int argc, char * const argv[]);
541 #endif
542
543 #else /* __ASSEMBLY__ */
544
545 #endif /* __ASSEMBLY__ */
546
547 /* Put only stuff here that the assembler can digest */
548
549 #ifdef CONFIG_POST
550 #define CONFIG_HAS_POST
551 #ifndef CONFIG_POST_ALT_LIST
552 #define CONFIG_POST_STD_LIST
553 #endif
554 #endif
555
556 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
557
558 /*
559 * check_member() - Check the offset of a structure member
560 *
561 * @structure: Name of structure (e.g. global_data)
562 * @member: Name of member (e.g. baudrate)
563 * @offset: Expected offset in bytes
564 */
565 #define check_member(structure, member, offset) _Static_assert( \
566 offsetof(struct structure, member) == offset, \
567 "`struct " #structure "` offset for `" #member "` is not " #offset)
568
569 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
570 #ifdef CONFIG_EFI_STUB
571 #define ll_boot_init() false
572 #else
573 #define ll_boot_init() true
574 #endif
575
576 /* Pull in stuff for the build system */
577 #ifdef DO_DEPS_ONLY
578 # include <environment.h>
579 #endif
580
581 #endif /* __COMMON_H_ */
582