xref: /openbmc/u-boot/include/configs/cyrus.h (revision 6c6add60)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Based on corenet_ds.h
4  */
5 
6 #ifndef __CONFIG_H
7 #define __CONFIG_H
8 
9 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
10 #error Must call Cyrus CONFIG with a specific CPU enabled.
11 #endif
12 
13 #define CONFIG_SDCARD
14 #define CONFIG_FSL_SATA_V2
15 #define CONFIG_PCIE3
16 #define CONFIG_PCIE4
17 #ifdef CONFIG_ARCH_P5020
18 #define CONFIG_SYS_FSL_RAID_ENGINE
19 #define CONFIG_SYS_DPAA_RMAN
20 #endif
21 #define CONFIG_SYS_DPAA_PME
22 
23 /*
24  * Corenet DS style board configuration file
25  */
26 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
27 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
28 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
29 #if defined(CONFIG_ARCH_P5020)
30 #define CONFIG_SYS_CLK_FREQ 133000000
31 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
32 #elif defined(CONFIG_ARCH_P5040)
33 #define CONFIG_SYS_CLK_FREQ 100000000
34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
35 #endif
36 
37 /* High Level Configuration Options */
38 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
39 
40 #define CONFIG_SYS_MMC_MAX_DEVICE     1
41 
42 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
43 #define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
44 #define CONFIG_PCIE1			/* PCIE controller 1 */
45 #define CONFIG_PCIE2			/* PCIE controller 2 */
46 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
47 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
48 
49 #define CONFIG_ENV_OVERWRITE
50 
51 #if defined(CONFIG_SDCARD)
52 #define CONFIG_FSL_FIXED_MMC_LOCATION
53 #define CONFIG_SYS_MMC_ENV_DEV          0
54 #define CONFIG_ENV_SIZE			0x2000
55 #define CONFIG_ENV_OFFSET		(512 * 1658)
56 #endif
57 
58 /*
59  * These can be toggled for performance analysis, otherwise use default.
60  */
61 #define CONFIG_SYS_CACHE_STASHING
62 #define CONFIG_BACKSIDE_L2_CACHE
63 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
64 #define CONFIG_BTB			/* toggle branch predition */
65 #define	CONFIG_DDR_ECC
66 #ifdef CONFIG_DDR_ECC
67 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
68 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
69 #endif
70 
71 #define CONFIG_ENABLE_36BIT_PHYS
72 
73 #ifdef CONFIG_PHYS_64BIT
74 #define CONFIG_ADDR_MAP
75 #define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
76 #endif
77 
78 /* test POST memory test */
79 #undef CONFIG_POST
80 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
81 #define CONFIG_SYS_MEMTEST_END		0x00400000
82 
83 /*
84  *  Config the L3 Cache as L3 SRAM
85  */
86 #define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
87 #ifdef CONFIG_PHYS_64BIT
88 #define CONFIG_SYS_INIT_L3_ADDR_PHYS	(0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
89 #else
90 #define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
91 #endif
92 #define CONFIG_SYS_L3_SIZE		(1024 << 10)
93 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
94 
95 #ifdef CONFIG_PHYS_64BIT
96 #define CONFIG_SYS_DCSRBAR		0xf0000000
97 #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
98 #endif
99 
100 /*
101  * DDR Setup
102  */
103 #define CONFIG_VERY_BIG_RAM
104 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
105 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
106 
107 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
108 #define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
109 
110 #define CONFIG_DDR_SPD
111 
112 #define CONFIG_SYS_SPD_BUS_NUM	1
113 #define SPD_EEPROM_ADDRESS1	0x51
114 #define SPD_EEPROM_ADDRESS2	0x52
115 #define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
116 
117 /*
118  * Local Bus Definitions
119  */
120 
121 #define CONFIG_SYS_LBC0_BASE		0xe0000000 /* Start of LBC Registers */
122 #ifdef CONFIG_PHYS_64BIT
123 #define CONFIG_SYS_LBC0_BASE_PHYS	0xfe0000000ull
124 #else
125 #define CONFIG_SYS_LBC0_BASE_PHYS	CONFIG_SYS_LBC0_BASE
126 #endif
127 
128 #define CONFIG_SYS_LBC1_BASE		0xe1000000 /* Start of LBC Registers */
129 #ifdef CONFIG_PHYS_64BIT
130 #define CONFIG_SYS_LBC1_BASE_PHYS	0xfe1000000ull
131 #else
132 #define CONFIG_SYS_LBC1_BASE_PHYS	CONFIG_SYS_LBC1_BASE
133 #endif
134 
135 /* Set the local bus clock 1/16 of platform clock */
136 #define CONFIG_SYS_LBC_LCRR		(LCRR_CLKDIV_16 | LCRR_EADC_1)
137 
138 #define CONFIG_SYS_BR0_PRELIM \
139 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
140 #define CONFIG_SYS_BR1_PRELIM \
141 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
142 
143 #define CONFIG_SYS_OR0_PRELIM	0xfff00010
144 #define CONFIG_SYS_OR1_PRELIM	0xfff00010
145 
146 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* start of monitor */
147 
148 #if defined(CONFIG_RAMBOOT_PBL)
149 #define CONFIG_SYS_RAMBOOT
150 #endif
151 
152 #define CONFIG_HWCONFIG
153 
154 /* define to use L1 as initial stack */
155 #define CONFIG_L1_INIT_RAM
156 #define CONFIG_SYS_INIT_RAM_LOCK
157 #define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
158 #ifdef CONFIG_PHYS_64BIT
159 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
160 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
161 /* The assembler doesn't like typecast */
162 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
163 	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
164 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
165 #else
166 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
167 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
168 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
169 #endif
170 #define CONFIG_SYS_INIT_RAM_SIZE		0x00004000	/* Size of used area in RAM */
171 
172 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
173 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
174 
175 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
176 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
177 
178 /* Serial Port - controlled on board with jumper J8
179  * open - index 2
180  * shorted - index 1
181  */
182 #define CONFIG_SYS_NS16550_SERIAL
183 #define CONFIG_SYS_NS16550_REG_SIZE	1
184 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
185 
186 #define CONFIG_SYS_BAUDRATE_TABLE	\
187 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
188 
189 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
190 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
191 #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
192 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
193 
194 /* I2C */
195 #define CONFIG_SYS_I2C
196 #define CONFIG_SYS_I2C_FSL
197 #define CONFIG_I2C_MULTI_BUS
198 #define CONFIG_I2C_CMD_TREE
199 #define CONFIG_SYS_FSL_I2C_SPEED		400000	/* I2C speed and slave address */
200 #define CONFIG_SYS_FSL_I2C_SLAVE		0x7F
201 #define CONFIG_SYS_FSL_I2C_OFFSET		0x118000
202 #define CONFIG_SYS_FSL_I2C2_SPEED		400000	/* I2C speed and slave address */
203 #define CONFIG_SYS_FSL_I2C2_SLAVE		0x7F
204 #define CONFIG_SYS_FSL_I2C2_OFFSET		0x118100
205 #define CONFIG_SYS_FSL_I2C3_SPEED		400000	/* I2C speed and slave address */
206 #define CONFIG_SYS_FSL_I2C3_SLAVE		0x7F
207 #define CONFIG_SYS_FSL_I2C3_OFFSET		0x119000
208 #define CONFIG_SYS_FSL_I2C4_SPEED		400000	/* I2C speed and slave address */
209 #define CONFIG_SYS_FSL_I2C4_SLAVE		0x7F
210 #define CONFIG_SYS_FSL_I2C4_OFFSET		0x119100
211 
212 #define CONFIG_ID_EEPROM
213 #define CONFIG_SYS_I2C_EEPROM_NXID
214 #define CONFIG_SYS_EEPROM_BUS_NUM	0
215 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
216 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
217 
218 #define CONFIG_SYS_I2C_GENERIC_MAC
219 #define CONFIG_SYS_I2C_MAC1_BUS 3
220 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
221 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
222 #define CONFIG_SYS_I2C_MAC2_BUS 0
223 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
224 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
225 
226 #define CONFIG_RTC_MCP79411		1
227 #define CONFIG_SYS_RTC_BUS_NUM		3
228 #define CONFIG_SYS_I2C_RTC_ADDR		0x6f
229 
230 /*
231  * eSPI - Enhanced SPI
232  */
233 
234 /*
235  * General PCI
236  * Memory space is mapped 1-1, but I/O space must start from 0.
237  */
238 
239 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
240 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
241 #ifdef CONFIG_PHYS_64BIT
242 #define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
243 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
244 #else
245 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
246 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
247 #endif
248 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
249 #define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
250 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
251 #ifdef CONFIG_PHYS_64BIT
252 #define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
253 #else
254 #define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
255 #endif
256 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
257 
258 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
259 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
260 #ifdef CONFIG_PHYS_64BIT
261 #define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
262 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
263 #else
264 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
265 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
266 #endif
267 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
268 #define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
269 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
270 #ifdef CONFIG_PHYS_64BIT
271 #define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
272 #else
273 #define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
274 #endif
275 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
276 
277 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
278 #define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
279 #ifdef CONFIG_PHYS_64BIT
280 #define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
281 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
282 #else
283 #define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
284 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc0000000
285 #endif
286 #define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
287 #define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
288 #define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
289 #ifdef CONFIG_PHYS_64BIT
290 #define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
291 #else
292 #define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
293 #endif
294 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
295 
296 /* controller 4, Base address 203000 */
297 #define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
298 #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
299 #define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
300 #define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
301 #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
302 #define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
303 
304 /* Qman/Bman */
305 #define CONFIG_SYS_BMAN_NUM_PORTALS	10
306 #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
307 #ifdef CONFIG_PHYS_64BIT
308 #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
309 #else
310 #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
311 #endif
312 #define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
313 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
314 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
315 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
316 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
317 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
318 					 CONFIG_SYS_BMAN_CENA_SIZE)
319 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
320 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
321 #define CONFIG_SYS_QMAN_NUM_PORTALS	10
322 #define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
323 #ifdef CONFIG_PHYS_64BIT
324 #define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
325 #else
326 #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
327 #endif
328 #define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
329 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
330 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
331 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
332 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
333 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
334 					  CONFIG_SYS_QMAN_CENA_SIZE)
335 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
336 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
337 
338 #define CONFIG_SYS_DPAA_FMAN
339 /* Default address of microcode for the Linux Fman driver */
340 /*
341  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
342  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
343  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
344  */
345 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
346 #define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)
347 
348 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
349 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
350 
351 #ifdef CONFIG_SYS_DPAA_FMAN
352 #define CONFIG_FMAN_ENET
353 #endif
354 
355 #ifdef CONFIG_PCI
356 #define CONFIG_PCI_INDIRECT_BRIDGE
357 
358 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
359 #endif	/* CONFIG_PCI */
360 
361 /* SATA */
362 #ifdef CONFIG_FSL_SATA_V2
363 #define CONFIG_SYS_SATA_MAX_DEVICE	2
364 #define CONFIG_SATA1
365 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
366 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
367 #define CONFIG_SATA2
368 #define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
369 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
370 
371 #define CONFIG_LBA48
372 #endif
373 
374 #ifdef CONFIG_FMAN_ENET
375 #define CONFIG_SYS_TBIPA_VALUE	8
376 #define CONFIG_ETHPRIME		"FM1@DTSEC4"
377 #endif
378 
379 /*
380  * Environment
381  */
382 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
383 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
384 
385 /*
386  * USB
387  */
388 #define CONFIG_HAS_FSL_DR_USB
389 #define CONFIG_HAS_FSL_MPH_USB
390 
391 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
392 #define CONFIG_USB_EHCI_FSL
393 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
394 #define CONFIG_EHCI_IS_TDI
395  /* _VIA_CONTROL_EP  */
396 #endif
397 
398 #ifdef CONFIG_MMC
399 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
400 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
401 #endif
402 
403 /*
404  * Miscellaneous configurable options
405  */
406 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
407 
408 /*
409  * For booting Linux, the board info and command line data
410  * have to be in the first 64 MB of memory, since this is
411  * the maximum mapped by the Linux kernel during initialization.
412  */
413 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
414 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
415 
416 #ifdef CONFIG_CMD_KGDB
417 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
418 #endif
419 
420 /*
421  * Environment Configuration
422  */
423 #define CONFIG_ROOTPATH		"/opt/nfsroot"
424 #define CONFIG_BOOTFILE		"uImage"
425 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
426 
427 /* default location for tftp and bootm */
428 #define CONFIG_LOADADDR		1000000
429 
430 #define __USB_PHY_TYPE	utmi
431 
432 #define	CONFIG_EXTRA_ENV_SETTINGS \
433 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
434 "bank_intlv=cs0_cs1;"					\
435 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
436 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
437 "netdev=eth0\0"						\
438 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
439 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"			\
440 "consoledev=ttyS0\0"					\
441 "ramdiskaddr=2000000\0"					\
442 "fdtaddr=1e00000\0"					\
443 "bdev=sda3\0"
444 
445 #define CONFIG_HDBOOT					\
446 "setenv bootargs root=/dev/$bdev rw "		\
447 "console=$consoledev,$baudrate $othbootargs;"	\
448 "tftp $loadaddr $bootfile;"			\
449 "tftp $fdtaddr $fdtfile;"			\
450 "bootm $loadaddr - $fdtaddr"
451 
452 #define CONFIG_NFSBOOTCOMMAND			\
453 "setenv bootargs root=/dev/nfs rw "	\
454 "nfsroot=$serverip:$rootpath "		\
455 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
456 "console=$consoledev,$baudrate $othbootargs;"	\
457 "tftp $loadaddr $bootfile;"		\
458 "tftp $fdtaddr $fdtfile;"		\
459 "bootm $loadaddr - $fdtaddr"
460 
461 #define CONFIG_RAMBOOTCOMMAND				\
462 "setenv bootargs root=/dev/ram rw "		\
463 "console=$consoledev,$baudrate $othbootargs;"	\
464 "tftp $ramdiskaddr $ramdiskfile;"		\
465 "tftp $loadaddr $bootfile;"			\
466 "tftp $fdtaddr $fdtfile;"			\
467 "bootm $loadaddr $ramdiskaddr $fdtaddr"
468 
469 #define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT
470 
471 #include <asm/fsl_secure_boot.h>
472 
473 #endif	/* __CONFIG_H */
474