xref: /openbmc/linux/drivers/remoteproc/Kconfig (revision 03bd158e)
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Remoteproc drivers"
3
4config REMOTEPROC
5	bool "Support for Remote Processor subsystem"
6	depends on HAS_DMA
7	select CRC32
8	select FW_LOADER
9	select VIRTIO
10	select WANT_DEV_COREDUMP
11	help
12	  Support for remote processors (such as DSP coprocessors). These
13	  are mainly used on embedded systems.
14
15if REMOTEPROC
16
17config REMOTEPROC_CDEV
18	bool "Remoteproc character device interface"
19	help
20	  Say y here to have a character device interface for the remoteproc
21	  framework. Userspace can boot/shutdown remote processors through
22	  this interface.
23
24	  It's safe to say N if you don't want to use this interface.
25
26config IMX_REMOTEPROC
27	tristate "i.MX remoteproc support"
28	depends on ARCH_MXC
29	depends on HAVE_ARM_SMCCC
30	select MAILBOX
31	help
32	  Say y here to support iMX's remote processors via the remote
33	  processor framework.
34
35	  It's safe to say N here.
36
37config IMX_DSP_REMOTEPROC
38	tristate "i.MX DSP remoteproc support"
39	depends on ARCH_MXC
40	depends on HAVE_ARM_SMCCC
41	select MAILBOX
42	help
43	  Say y here to support iMX's DSP remote processors via the remote
44	  processor framework.
45
46	  It's safe to say N here.
47
48config INGENIC_VPU_RPROC
49	tristate "Ingenic JZ47xx VPU remoteproc support"
50	depends on MIPS || COMPILE_TEST
51	help
52	  Say y or m here to support the VPU in the JZ47xx SoCs from Ingenic.
53
54	  This can be either built-in or a loadable module.
55	  If unsure say N.
56
57config MTK_SCP
58	tristate "Mediatek SCP support"
59	depends on ARCH_MEDIATEK || COMPILE_TEST
60	select RPMSG_MTK_SCP
61	help
62	  Say y here to support Mediatek's System Companion Processor (SCP) via
63	  the remote processor framework.
64
65	  It's safe to say N here.
66
67config OMAP_REMOTEPROC
68	tristate "OMAP remoteproc support"
69	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
70	depends on OMAP_IOMMU
71	select MAILBOX
72	select OMAP2PLUS_MBOX
73	help
74	  Say y here to support OMAP's remote processors (dual M3
75	  and DSP on OMAP4) via the remote processor framework.
76
77	  Currently only supported on OMAP4.
78
79	  Usually you want to say Y here, in order to enable multimedia
80	  use-cases to run on your platform (multimedia codecs are
81	  offloaded to remote DSP processors using this framework).
82
83	  It's safe to say N here if you're not interested in multimedia
84	  offloading or just want a bare minimum kernel.
85
86config OMAP_REMOTEPROC_WATCHDOG
87	bool "OMAP remoteproc watchdog timer"
88	depends on OMAP_REMOTEPROC
89	default n
90	help
91	  Say Y here to enable watchdog timer for remote processors.
92
93	  This option controls the watchdog functionality for the remote
94	  processors in OMAP. Dedicated OMAP DMTimers are used by the remote
95	  processors and triggers the timer interrupt upon a watchdog
96	  detection.
97
98config WKUP_M3_RPROC
99	tristate "AMx3xx Wakeup M3 remoteproc support"
100	depends on SOC_AM33XX || SOC_AM43XX
101	help
102	  Say y here to support Wakeup M3 remote processor on TI AM33xx
103	  and AM43xx family of SoCs.
104
105	  Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
106	  for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
107	  firmware onto these remote processors.
108	  If unsure say N.
109
110config DA8XX_REMOTEPROC
111	tristate "DA8xx/OMAP-L13x remoteproc support"
112	depends on ARCH_DAVINCI_DA8XX
113	depends on DMA_CMA
114	help
115	  Say y here to support DA8xx/OMAP-L13x remote processors via the
116	  remote processor framework.
117
118	  You want to say y here in order to enable AMP
119	  use-cases to run on your platform (multimedia codecs are
120	  offloaded to remote DSP processors using this framework).
121
122	  This module controls the name of the firmware file that gets
123	  loaded on the DSP.  This file must reside in the /lib/firmware
124	  directory.  It can be specified via the module parameter
125	  da8xx_fw_name=<filename>, and if not specified will default to
126	  "rproc-dsp-fw".
127
128	  It's safe to say n here if you're not interested in multimedia
129	  offloading.
130
131config KEYSTONE_REMOTEPROC
132	tristate "Keystone Remoteproc support"
133	depends on ARCH_KEYSTONE
134	help
135	  Say Y here here to support Keystone remote processors (DSP)
136	  via the remote processor framework.
137
138	  It's safe to say N here if you're not interested in the Keystone
139	  DSPs or just want to use a bare minimum kernel.
140
141config MESON_MX_AO_ARC_REMOTEPROC
142	tristate "Amlogic Meson6/8/8b/8m2 AO ARC remote processor support"
143	depends on HAS_IOMEM
144	depends on (ARM && ARCH_MESON) || COMPILE_TEST
145	select GENERIC_ALLOCATOR
146	help
147	  Say m or y here to have support for the AO ARC remote processor
148	  on Amlogic Meson6/Meson8/Meson8b/Meson8m2 SoCs. This is
149	  typically used for system suspend.
150	  If unsure say N.
151
152config PRU_REMOTEPROC
153	tristate "TI PRU remoteproc support"
154	depends on TI_PRUSS
155	default TI_PRUSS
156	help
157	  Support for TI PRU remote processors present within a PRU-ICSS
158	  subsystem via the remote processor framework.
159
160	  Say Y or M here to support the Programmable Realtime Unit (PRU)
161	  processors on various TI SoCs. It's safe to say N here if you're
162	  not interested in the PRU or if you are unsure.
163
164config QCOM_PIL_INFO
165	tristate
166
167config QCOM_RPROC_COMMON
168	tristate
169
170config QCOM_Q6V5_COMMON
171	tristate
172	depends on ARCH_QCOM
173	depends on QCOM_SMEM
174
175config QCOM_Q6V5_ADSP
176	tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
177	depends on OF && ARCH_QCOM
178	depends on QCOM_SMEM
179	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
180	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
181	depends on QCOM_SYSMON || QCOM_SYSMON=n
182	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
183	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
184	select MFD_SYSCON
185	select QCOM_PIL_INFO
186	select QCOM_MDT_LOADER
187	select QCOM_Q6V5_COMMON
188	select QCOM_RPROC_COMMON
189	help
190	  Say y here to support the Peripheral Image Loader
191	  for the non-TrustZone part of Qualcomm Technology Inc. ADSP and CDSP
192	  remote processors. The TrustZone part is handled by QCOM_Q6V5_PAS
193	  driver.
194
195config QCOM_Q6V5_MSS
196	tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
197	depends on OF && ARCH_QCOM
198	depends on QCOM_SMEM
199	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
200	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
201	depends on QCOM_SYSMON || QCOM_SYSMON=n
202	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
203	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
204	select MFD_SYSCON
205	select QCOM_MDT_LOADER
206	select QCOM_PIL_INFO
207	select QCOM_Q6V5_COMMON
208	select QCOM_RPROC_COMMON
209	select QCOM_SCM
210	help
211	  Say y here to support the Qualcomm self-authenticating modem
212	  subsystem based on Hexagon V5. The TrustZone based system is
213	  handled by QCOM_Q6V5_PAS driver.
214
215config QCOM_Q6V5_PAS
216	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
217	depends on OF && ARCH_QCOM
218	depends on QCOM_SMEM
219	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
220	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
221	depends on QCOM_SYSMON || QCOM_SYSMON=n
222	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
223	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
224	select MFD_SYSCON
225	select QCOM_PIL_INFO
226	select QCOM_MDT_LOADER
227	select QCOM_Q6V5_COMMON
228	select QCOM_RPROC_COMMON
229	select QCOM_SCM
230	help
231	  Say y here to support the TrustZone based Peripheral Image Loader
232	  for the Qualcomm Hexagon v5 based remote processors. This is commonly
233	  used to control subsystems such as ADSP (Audio DSP),
234	  CDSP (Compute DSP), MPSS (Modem Peripheral SubSystem), and
235	  SLPI (Sensor Low Power Island).
236
237config QCOM_Q6V5_WCSS
238	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
239	depends on OF && ARCH_QCOM
240	depends on QCOM_SMEM
241	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
242	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
243	depends on QCOM_SYSMON || QCOM_SYSMON=n
244	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
245	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
246	select MFD_SYSCON
247	select QCOM_MDT_LOADER
248	select QCOM_PIL_INFO
249	select QCOM_Q6V5_COMMON
250	select QCOM_RPROC_COMMON
251	select QCOM_SCM
252	help
253	  Say y here to support the Qualcomm Peripheral Image Loader for the
254	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
255	  a non-TrustZone wireless subsystem.
256
257config QCOM_SYSMON
258	tristate "Qualcomm sysmon driver"
259	depends on RPMSG
260	depends on ARCH_QCOM
261	depends on NET
262	select QCOM_QMI_HELPERS
263	help
264	  The sysmon driver implements a sysmon QMI client and a handler for
265	  the sys_mon SMD and GLINK channel, which are used for graceful
266	  shutdown, retrieving failure information and propagating information
267	  about other subsystems being shut down.
268
269	  Say y here if your system runs firmware on any other subsystems, e.g.
270	  modem or DSP.
271
272config QCOM_WCNSS_PIL
273	tristate "Qualcomm WCNSS Peripheral Image Loader"
274	depends on OF && ARCH_QCOM
275	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
276	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
277	depends on QCOM_SMEM
278	depends on QCOM_SYSMON || QCOM_SYSMON=n
279	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
280	select QCOM_MDT_LOADER
281	select QCOM_PIL_INFO
282	select QCOM_RPROC_COMMON
283	select QCOM_SCM
284	help
285	  Say y here to support the Peripheral Image Loader for loading WCNSS
286	  firmware and boot the core on e.g. MSM8974, MSM8916. The firmware is
287	  verified and booted with the help of the Peripheral Authentication
288	  System (PAS) in TrustZone.
289
290config RCAR_REMOTEPROC
291	tristate "Renesas R-Car Gen3 remoteproc support"
292	depends on ARCH_RENESAS || COMPILE_TEST
293	help
294	  Say y here to support R-Car realtime processor via the
295	  remote processor framework. An ELF firmware can be loaded
296	  thanks to sysfs remoteproc entries. The remote processor
297	  can be started and stopped.
298	  This can be either built-in or a loadable module.
299	  If compiled as module (M), the module name is rcar_rproc.
300
301config ST_REMOTEPROC
302	tristate "ST remoteproc support"
303	depends on ARCH_STI
304	select MAILBOX
305	select STI_MBOX
306	help
307	  Say y here to support ST's adjunct processors via the remote
308	  processor framework.
309	  This can be either built-in or a loadable module.
310
311config ST_SLIM_REMOTEPROC
312	tristate
313
314config STM32_RPROC
315	tristate "STM32 remoteproc support"
316	depends on ARCH_STM32 || COMPILE_TEST
317	depends on REMOTEPROC
318	select MAILBOX
319	help
320	  Say y here to support STM32 MCU processors via the
321	  remote processor framework.
322
323	  You want to say y here in order to enable AMP
324	  use-cases to run on your platform (dedicated firmware could be
325	  offloaded to remote MCU processors using this framework).
326
327	  This can be either built-in or a loadable module.
328
329config TI_K3_DSP_REMOTEPROC
330	tristate "TI K3 DSP remoteproc support"
331	depends on ARCH_K3
332	select MAILBOX
333	select OMAP2PLUS_MBOX
334	help
335	  Say m here to support TI's C66x and C71x DSP remote processor
336	  subsystems on various TI K3 family of SoCs through the remote
337	  processor framework.
338
339	  It's safe to say N here if you're not interested in utilizing
340	  the DSP slave processors.
341
342config TI_K3_R5_REMOTEPROC
343	tristate "TI K3 R5 remoteproc support"
344	depends on ARCH_K3
345	select MAILBOX
346	select OMAP2PLUS_MBOX
347	help
348	  Say m here to support TI's R5F remote processor subsystems
349	  on various TI K3 family of SoCs through the remote processor
350	  framework.
351
352	  It's safe to say N here if you're not interested in utilizing
353	  a slave processor.
354
355config XLNX_R5_REMOTEPROC
356	tristate "Xilinx R5 remoteproc support"
357	depends on PM && ARCH_ZYNQMP
358	select ZYNQMP_FIRMWARE
359	select RPMSG_VIRTIO
360	select MAILBOX
361	select ZYNQMP_IPI_MBOX
362	help
363	  Say y or m here to support Xilinx R5 remote processors via the remote
364	  processor framework.
365
366	  It's safe to say N if not interested in using RPU r5f cores.
367
368endif # REMOTEPROC
369
370endmenu
371