xref: /openbmc/linux/arch/m68k/Kconfig.devices (revision 1e5b5df6)
1# SPDX-License-Identifier: GPL-2.0
2if MMU
3
4config ARCH_MAY_HAVE_PC_FDC
5	bool
6	depends on BROKEN && (Q40 || SUN3X)
7	default y
8
9menu "Platform devices"
10
11config HEARTBEAT
12	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
13	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
14	help
15	  Use the power-on LED on your machine as a load meter.  The exact
16	  behavior is platform-dependent, but normally the flash frequency is
17	  a hyperbolic function of the 5-minute load average.
18
19# We have a dedicated heartbeat LED. :-)
20config PROC_HARDWARE
21	bool "/proc/hardware support"
22	depends on PROC_FS
23	help
24	  Say Y here to support the /proc/hardware file, which gives you
25	  access to information about the machine you're running on,
26	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
27	  and memory size.
28
29config NATFEAT
30	bool "ARAnyM emulator support"
31	depends on ATARI
32	help
33	  This option enables support for ARAnyM native features, such as
34	  access to a disk image as /dev/hda.
35
36config NFBLOCK
37	tristate "NatFeat block device support"
38	depends on BLOCK && NATFEAT
39	help
40	  Say Y to include support for the ARAnyM NatFeat block device
41	  which allows direct access to the hard drives without using
42	  the hardware emulation.
43
44config NFCON
45	tristate "NatFeat console driver"
46	depends on TTY && NATFEAT
47	help
48	  Say Y to include support for the ARAnyM NatFeat console driver
49	  which allows the console output to be redirected to the stderr
50	  output of ARAnyM.
51
52config NFETH
53	tristate "NatFeat Ethernet support"
54	depends on ETHERNET && NATFEAT
55	help
56	  Say Y to include support for the ARAnyM NatFeat network device
57	  which will emulate a regular ethernet device while presenting an
58	  ethertap device to the host system.
59
60config ATARI_ETHERNAT
61	bool "Atari EtherNAT Ethernet support"
62	depends on ATARI
63	help
64	  Say Y to include support for the EtherNAT network adapter for the
65	  CT/60 extension port.
66
67	  To compile the actual ethernet driver, choose Y or M for the SMC91X
68	  option in the network device section; the module will be called smc91x.
69
70config ATARI_ETHERNEC
71	bool "Atari EtherNEC Ethernet support"
72	depends on ATARI_ROM_ISA
73	help
74	  Say Y to include support for the EtherNEC network adapter for the
75	  ROM port. The driver works by polling instead of interrupts, so it
76	  is quite slow.
77
78	  This driver also supports the ethernet part of the NetUSBee ROM
79	  port combined Ethernet/USB adapter.
80
81	  To compile the actual ethernet driver, choose Y or M in for the NE2000
82	  option in the network device section; the module will be called ne.
83
84endmenu
85
86menu "Character devices"
87
88config ATARI_DSP56K
89	tristate "Atari DSP56k support"
90	depends on ATARI
91	help
92	  If you want to be able to use the DSP56001 in Falcons, say Y. This
93	  driver is still experimental, and if you don't know what it is, or
94	  if you don't have this processor, just say N.
95
96	  To compile this driver as a module, choose M here.
97
98config AMIGA_BUILTIN_SERIAL
99	tristate "Amiga builtin serial support"
100	depends on AMIGA && TTY
101	help
102	  If you want to use your Amiga's built-in serial port in Linux,
103	  answer Y.
104
105	  To compile this driver as a module, choose M here.
106
107config HPDCA
108	tristate "HP DCA serial support"
109	depends on DIO && SERIAL_8250
110	help
111	  If you want to use the internal "DCA" serial ports on an HP300
112	  machine, say Y here.
113
114config HPAPCI
115	tristate "HP APCI serial support"
116	depends on HP300 && SERIAL_8250
117	help
118	  If you want to use the internal "APCI" serial ports on an HP400
119	  machine, say Y here.
120
121config SERIAL_CONSOLE
122	bool "Support for serial port console"
123	depends on AMIGA_BUILTIN_SERIAL=y
124	help
125	  If you say Y here, it will be possible to use a serial port as the
126	  system console (the system console is the device which receives all
127	  kernel messages and warnings and which allows logins in single user
128	  mode). This could be useful if some terminal or printer is connected
129	  to that serial port.
130
131	  Even if you say Y here, the currently visible virtual console
132	  (/dev/tty0) will still be used as the system console by default, but
133	  you can alter that using a kernel command line option such as
134	  "console=ttyS1". (Try "man bootparam" or see the documentation of
135	  your boot loader about how to pass options to the kernel at boot
136	  time.)
137
138	  If you don't have a graphical console and you say Y here, the
139	  kernel will automatically use the first serial line, /dev/ttyS0, as
140	  system console.
141
142	  If unsure, say N.
143
144endmenu
145
146endif
147