1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 36 #endif 37 38 /* Serial & console */ 39 #define CONFIG_SYS_NS16550_SERIAL 40 /* ns16550 reg in the low bits of cpu reg */ 41 #define CONFIG_SYS_NS16550_CLK 24000000 42 #ifndef CONFIG_DM_SERIAL 43 # define CONFIG_SYS_NS16550_REG_SIZE -4 44 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 45 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 46 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 47 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 48 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 49 #endif 50 51 /* CPU */ 52 #define COUNTER_FREQUENCY 24000000 53 54 /* 55 * The DRAM Base differs between some models. We cannot use macros for the 56 * CONFIG_FOO defines which contain the DRAM base address since they end 57 * up unexpanded in include/autoconf.mk . 58 * 59 * So we have to have this #ifdef #else #endif block for these. 60 */ 61 #ifdef CONFIG_MACH_SUN9I 62 #define SDRAM_OFFSET(x) 0x2##x 63 #define CONFIG_SYS_SDRAM_BASE 0x20000000 64 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 65 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 66 * since it needs to fit in with the other values. By also #defining it 67 * we get warnings if the Kconfig value mismatches. */ 68 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 69 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 70 #else 71 #define SDRAM_OFFSET(x) 0x4##x 72 #define CONFIG_SYS_SDRAM_BASE 0x40000000 73 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 74 /* V3s do not have enough memory to place code at 0x4a000000 */ 75 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 76 * since it needs to fit in with the other values. By also #defining it 77 * we get warnings if the Kconfig value mismatches. */ 78 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 79 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 80 #endif 81 82 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 83 84 /* 85 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 86 * slightly bigger. Note that it is possible to map the first 32 KiB of the 87 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 88 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 89 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 90 * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register 91 * is known yet. 92 * H6 has SRAM A1 at 0x00020000. 93 */ 94 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS 95 /* FIXME: this may be larger on some SoCs */ 96 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 97 98 #define CONFIG_SYS_INIT_SP_OFFSET \ 99 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 100 #define CONFIG_SYS_INIT_SP_ADDR \ 101 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 102 103 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 104 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 105 106 #ifdef CONFIG_AHCI 107 #define CONFIG_SCSI_AHCI_PLAT 108 #define CONFIG_SUNXI_AHCI 109 #define CONFIG_SYS_64BIT_LBA 110 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 111 #define CONFIG_SYS_SCSI_MAX_LUN 1 112 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 113 CONFIG_SYS_SCSI_MAX_LUN) 114 #endif 115 116 #define CONFIG_SETUP_MEMORY_TAGS 117 #define CONFIG_CMDLINE_TAG 118 #define CONFIG_INITRD_TAG 119 #define CONFIG_SERIAL_TAG 120 121 #ifdef CONFIG_NAND_SUNXI 122 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 123 #define CONFIG_SYS_NAND_ONFI_DETECTION 124 #define CONFIG_SYS_MAX_NAND_DEVICE 8 125 #endif 126 127 #ifdef CONFIG_SPL_SPI_SUNXI 128 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 129 #endif 130 131 /* mmc config */ 132 #ifdef CONFIG_MMC 133 #define CONFIG_MMC_SUNXI_SLOT 0 134 #endif 135 136 #if defined(CONFIG_ENV_IS_IN_MMC) 137 138 #ifdef CONFIG_ARM64 139 /* 140 * This is actually (CONFIG_ENV_OFFSET - 141 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 142 * directly in a makefile, without the preprocessor expansion. 143 */ 144 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 145 #endif 146 147 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 148 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 149 #define CONFIG_SYS_MMC_ENV_DEV 1 150 #else 151 /* Otherwise, use the only device we have */ 152 #define CONFIG_SYS_MMC_ENV_DEV 0 153 #endif 154 #define CONFIG_SYS_MMC_MAX_DEVICE 4 155 #endif 156 157 #ifndef CONFIG_MACH_SUN8I_V3S 158 /* 64MB of malloc() pool */ 159 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 160 #else 161 /* 2MB of malloc() pool */ 162 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 163 #endif 164 165 /* 166 * Miscellaneous configurable options 167 */ 168 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 169 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 170 171 /* standalone support */ 172 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 173 174 /* FLASH and environment organization */ 175 176 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 177 178 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 179 #define CONFIG_SPL_BOARD_LOAD_IMAGE 180 #endif 181 182 /* 183 * We cannot use expressions here, because expressions won't be evaluated in 184 * autoconf.mk. 185 */ 186 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 187 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ 188 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 189 #ifdef CONFIG_ARM64 190 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 191 #define LOW_LEVEL_SRAM_STACK 0x00054000 192 #else 193 #define LOW_LEVEL_SRAM_STACK 0x00018000 194 #endif /* !CONFIG_ARM64 */ 195 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 196 #define CONFIG_SPL_TEXT_BASE 0x20060 /* sram start+header */ 197 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 198 /* end of SRAM A2 on H6 for now */ 199 #define LOW_LEVEL_SRAM_STACK 0x00118000 200 #else 201 #define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */ 202 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 203 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 204 #endif 205 206 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 207 208 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 209 210 211 /* I2C */ 212 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 213 defined CONFIG_SY8106A_POWER 214 #endif 215 216 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 217 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 218 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 219 #define CONFIG_SYS_I2C_MVTWSI 220 #ifndef CONFIG_DM_I2C 221 #define CONFIG_SYS_I2C 222 #define CONFIG_SYS_I2C_SPEED 400000 223 #define CONFIG_SYS_I2C_SLAVE 0x7f 224 #endif 225 #endif 226 227 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 228 #define CONFIG_SYS_I2C_SOFT 229 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 230 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 231 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 232 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 233 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 234 #ifndef __ASSEMBLY__ 235 extern int soft_i2c_gpio_sda; 236 extern int soft_i2c_gpio_scl; 237 #endif 238 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 239 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 240 #else 241 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 242 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 243 #endif 244 245 /* PMU */ 246 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 247 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 248 defined CONFIG_SY8106A_POWER 249 #endif 250 251 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 252 #if CONFIG_CONS_INDEX == 1 253 #ifdef CONFIG_MACH_SUN9I 254 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 255 #else 256 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 257 #endif 258 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 259 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 260 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 261 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 262 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 263 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 264 #else 265 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 266 #endif 267 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 268 269 /* GPIO */ 270 #define CONFIG_SUNXI_GPIO 271 272 #ifdef CONFIG_VIDEO_SUNXI 273 /* 274 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 275 * to use as framebuffer. This must be a multiple of 4096. 276 */ 277 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 278 279 #define CONFIG_VIDEO_LOGO 280 #define CONFIG_VIDEO_STD_TIMINGS 281 #define CONFIG_I2C_EDID 282 #define VIDEO_LINE_LEN (pGD->plnSizeX) 283 284 /* allow both serial and cfb console. */ 285 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 286 287 #endif /* CONFIG_VIDEO_SUNXI */ 288 289 /* Ethernet support */ 290 291 #ifdef CONFIG_SUN7I_GMAC 292 #define CONFIG_PHY_REALTEK 293 #endif 294 295 #ifdef CONFIG_USB_EHCI_HCD 296 #define CONFIG_USB_OHCI_NEW 297 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 298 #endif 299 300 #ifdef CONFIG_USB_KEYBOARD 301 #define CONFIG_PREBOOT 302 #endif 303 304 #ifndef CONFIG_SPL_BUILD 305 306 #ifdef CONFIG_ARM64 307 /* 308 * Boards seem to come with at least 512MB of DRAM. 309 * The kernel should go at 512K, which is the default text offset (that will 310 * be adjusted at runtime if needed). 311 * There is no compression for arm64 kernels (yet), so leave some space 312 * for really big kernels, say 256MB for now. 313 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 314 * Align the initrd to a 2MB page. 315 */ 316 #define BOOTM_SIZE __stringify(0xa000000) 317 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 318 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 319 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 320 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 321 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 322 323 #else 324 /* 325 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 326 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 327 * 1M script, 1M pxe and the ramdisk at the end. 328 */ 329 #ifndef CONFIG_MACH_SUN8I_V3S 330 #define BOOTM_SIZE __stringify(0xa000000) 331 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 332 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 333 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 334 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 335 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 336 #else 337 /* 338 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 339 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 340 * 1M script, 1M pxe and the ramdisk at the end. 341 */ 342 #define BOOTM_SIZE __stringify(0x2e00000) 343 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 344 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 345 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 346 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 347 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 348 #endif 349 #endif 350 351 #define MEM_LAYOUT_ENV_SETTINGS \ 352 "bootm_size=" BOOTM_SIZE "\0" \ 353 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 354 "fdt_addr_r=" FDT_ADDR_R "\0" \ 355 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 356 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 357 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 358 359 #define DFU_ALT_INFO_RAM \ 360 "dfu_alt_info_ram=" \ 361 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 362 "fdt ram " FDT_ADDR_R " 0x100000;" \ 363 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 364 365 #ifdef CONFIG_MMC 366 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 367 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 368 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 369 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 370 "bootcmd_mmc_auto=" \ 371 "if test ${mmc_bootdev} -eq 1; then " \ 372 "run bootcmd_mmc1; " \ 373 "run bootcmd_mmc0; " \ 374 "elif test ${mmc_bootdev} -eq 0; then " \ 375 "run bootcmd_mmc0; " \ 376 "run bootcmd_mmc1; " \ 377 "fi\0" 378 379 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 380 "mmc_auto " 381 382 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 383 #else 384 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 385 #endif 386 #else 387 #define BOOT_TARGET_DEVICES_MMC(func) 388 #endif 389 390 #ifdef CONFIG_AHCI 391 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 392 #else 393 #define BOOT_TARGET_DEVICES_SCSI(func) 394 #endif 395 396 #ifdef CONFIG_USB_STORAGE 397 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 398 #else 399 #define BOOT_TARGET_DEVICES_USB(func) 400 #endif 401 402 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 403 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 404 "bootcmd_fel=" \ 405 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 406 "echo '(FEL boot)'; " \ 407 "source ${fel_scriptaddr}; " \ 408 "fi\0" 409 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 410 "fel " 411 412 #define BOOT_TARGET_DEVICES(func) \ 413 func(FEL, fel, na) \ 414 BOOT_TARGET_DEVICES_MMC(func) \ 415 BOOT_TARGET_DEVICES_SCSI(func) \ 416 BOOT_TARGET_DEVICES_USB(func) \ 417 func(PXE, pxe, na) \ 418 func(DHCP, dhcp, na) 419 420 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 421 #define BOOTCMD_SUNXI_COMPAT \ 422 "bootcmd_sunxi_compat=" \ 423 "setenv root /dev/mmcblk0p3 rootwait; " \ 424 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 425 "echo Loaded environment from uEnv.txt; " \ 426 "env import -t 0x44000000 ${filesize}; " \ 427 "fi; " \ 428 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 429 "ext2load mmc 0 0x43000000 script.bin && " \ 430 "ext2load mmc 0 0x48000000 uImage && " \ 431 "bootm 0x48000000\0" 432 #else 433 #define BOOTCMD_SUNXI_COMPAT 434 #endif 435 436 #include <config_distro_bootcmd.h> 437 438 #ifdef CONFIG_USB_KEYBOARD 439 #define CONSOLE_STDIN_SETTINGS \ 440 "preboot=usb start\0" \ 441 "stdin=serial,usbkbd\0" 442 #else 443 #define CONSOLE_STDIN_SETTINGS \ 444 "stdin=serial\0" 445 #endif 446 447 #ifdef CONFIG_VIDEO 448 #define CONSOLE_STDOUT_SETTINGS \ 449 "stdout=serial,vga\0" \ 450 "stderr=serial,vga\0" 451 #elif CONFIG_DM_VIDEO 452 #define CONFIG_SYS_WHITE_ON_BLACK 453 #define CONSOLE_STDOUT_SETTINGS \ 454 "stdout=serial,vidconsole\0" \ 455 "stderr=serial,vidconsole\0" 456 #else 457 #define CONSOLE_STDOUT_SETTINGS \ 458 "stdout=serial\0" \ 459 "stderr=serial\0" 460 #endif 461 462 #ifdef CONFIG_MTDIDS_DEFAULT 463 #define SUNXI_MTDIDS_DEFAULT \ 464 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 465 #else 466 #define SUNXI_MTDIDS_DEFAULT 467 #endif 468 469 #ifdef CONFIG_MTDPARTS_DEFAULT 470 #define SUNXI_MTDPARTS_DEFAULT \ 471 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 472 #else 473 #define SUNXI_MTDPARTS_DEFAULT 474 #endif 475 476 #define PARTS_DEFAULT \ 477 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 478 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 479 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 480 "name=system,size=-,uuid=${uuid_gpt_system};" 481 482 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 483 484 #ifdef CONFIG_ARM64 485 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 486 #else 487 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 488 #endif 489 490 #define CONSOLE_ENV_SETTINGS \ 491 CONSOLE_STDIN_SETTINGS \ 492 CONSOLE_STDOUT_SETTINGS 493 494 #ifdef CONFIG_ARM64 495 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 496 #else 497 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 498 #endif 499 500 #define CONFIG_EXTRA_ENV_SETTINGS \ 501 CONSOLE_ENV_SETTINGS \ 502 MEM_LAYOUT_ENV_SETTINGS \ 503 DFU_ALT_INFO_RAM \ 504 "fdtfile=" FDTFILE "\0" \ 505 "console=ttyS0,115200\0" \ 506 SUNXI_MTDIDS_DEFAULT \ 507 SUNXI_MTDPARTS_DEFAULT \ 508 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 509 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 510 "partitions=" PARTS_DEFAULT "\0" \ 511 BOOTCMD_SUNXI_COMPAT \ 512 BOOTENV 513 514 #else /* ifndef CONFIG_SPL_BUILD */ 515 #define CONFIG_EXTRA_ENV_SETTINGS 516 #endif 517 518 #endif /* _SUNXI_COMMON_CONFIG_H */ 519