1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Intel network device configuration 4# 5 6config NET_VENDOR_INTEL 7 bool "Intel devices" 8 default y 9 help 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Intel cards. If you say Y, you will be asked for 15 your specific card in the following questions. 16 17if NET_VENDOR_INTEL 18 19config E100 20 tristate "Intel(R) PRO/100+ support" 21 depends on PCI 22 select MII 23 help 24 This driver supports Intel(R) PRO/100 family of adapters. 25 To verify that your adapter is supported, find the board ID number 26 on the adapter. Look for a label that has a barcode and a number 27 in the format 123456-001 (six digits hyphen three digits). 28 29 Use the above information and the Adapter & Driver ID Guide that 30 can be located at: 31 32 <http://support.intel.com> 33 34 to identify the adapter. 35 36 More specific information on configuring the driver is in 37 <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>. 38 39 To compile this driver as a module, choose M here. The module 40 will be called e100. 41 42config E1000 43 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 44 depends on PCI 45 help 46 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 47 adapters. For more information on how to identify your adapter, go 48 to the Adapter & Driver ID Guide that can be located at: 49 50 <http://support.intel.com> 51 52 More specific information on configuring the driver is in 53 <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>. 54 55 To compile this driver as a module, choose M here. The module 56 will be called e1000. 57 58config E1000E 59 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 60 depends on PCI && (!SPARC32 || BROKEN) 61 depends on PTP_1588_CLOCK_OPTIONAL 62 select CRC32 63 help 64 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 65 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 66 use the regular e1000 driver For more information on how to 67 identify your adapter, go to the Adapter & Driver ID Guide that 68 can be located at: 69 70 <http://support.intel.com> 71 72 More specific information on configuring the driver is in 73 <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>. 74 75 To compile this driver as a module, choose M here. The module 76 will be called e1000e. 77 78config E1000E_HWTS 79 bool "Support HW cross-timestamp on PCH devices" 80 default y 81 depends on E1000E && X86 82 help 83 Say Y to enable hardware supported cross-timestamping on PCH 84 devices. The cross-timestamp is available through the PTP clock 85 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 86 87config IGB 88 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 89 depends on PCI 90 depends on PTP_1588_CLOCK_OPTIONAL 91 select I2C 92 select I2C_ALGOBIT 93 help 94 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 95 adapters. For more information on how to identify your adapter, go 96 to the Adapter & Driver ID Guide that can be located at: 97 98 <http://support.intel.com> 99 100 More specific information on configuring the driver is in 101 <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>. 102 103 To compile this driver as a module, choose M here. The module 104 will be called igb. 105 106config IGB_HWMON 107 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 108 default y 109 depends on IGB && HWMON && !(IGB=y && HWMON=m) 110 help 111 Say Y if you want to expose thermal sensor data on Intel devices. 112 113 Some of our devices contain thermal sensors, both external and internal. 114 This data is available via the hwmon sysfs interface and exposes 115 the onboard sensors. 116 117config IGB_DCA 118 bool "Direct Cache Access (DCA) Support" 119 default y 120 depends on IGB && DCA && !(IGB=y && DCA=m) 121 help 122 Say Y here if you want to use Direct Cache Access (DCA) in the 123 driver. DCA is a method for warming the CPU cache before data 124 is used, with the intent of lessening the impact of cache misses. 125 126config IGBVF 127 tristate "Intel(R) 82576 Virtual Function Ethernet support" 128 depends on PCI 129 help 130 This driver supports Intel(R) 82576 virtual functions. For more 131 information on how to identify your adapter, go to the Adapter & 132 Driver ID Guide that can be located at: 133 134 <http://support.intel.com> 135 136 More specific information on configuring the driver is in 137 <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>. 138 139 To compile this driver as a module, choose M here. The module 140 will be called igbvf. 141 142config IXGBE 143 tristate "Intel(R) 10GbE PCI Express adapters support" 144 depends on PCI 145 depends on PTP_1588_CLOCK_OPTIONAL 146 select MDIO 147 select PHYLIB 148 help 149 This driver supports Intel(R) 10GbE PCI Express family of 150 adapters. For more information on how to identify your adapter, go 151 to the Adapter & Driver ID Guide that can be located at: 152 153 <http://support.intel.com> 154 155 More specific information on configuring the driver is in 156 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>. 157 158 To compile this driver as a module, choose M here. The module 159 will be called ixgbe. 160 161config IXGBE_HWMON 162 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 163 default y 164 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 165 help 166 Say Y if you want to expose the thermal sensor data on some of 167 our cards, via a hwmon sysfs interface. 168 169config IXGBE_DCA 170 bool "Direct Cache Access (DCA) Support" 171 default y 172 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 173 help 174 Say Y here if you want to use Direct Cache Access (DCA) in the 175 driver. DCA is a method for warming the CPU cache before data 176 is used, with the intent of lessening the impact of cache misses. 177 178config IXGBE_DCB 179 bool "Data Center Bridging (DCB) Support" 180 default n 181 depends on IXGBE && DCB 182 help 183 Say Y here if you want to use Data Center Bridging (DCB) in the 184 driver. 185 186 If unsure, say N. 187 188config IXGBE_IPSEC 189 bool "IPSec XFRM cryptography-offload acceleration" 190 depends on IXGBE 191 depends on XFRM_OFFLOAD 192 default y 193 select XFRM_ALGO 194 help 195 Enable support for IPSec offload in ixgbe.ko 196 197config IXGBEVF 198 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 199 depends on PCI_MSI 200 help 201 This driver supports Intel(R) PCI Express virtual functions for the 202 Intel(R) ixgbe driver. For more information on how to identify your 203 adapter, go to the Adapter & Driver ID Guide that can be located at: 204 205 <http://support.intel.com> 206 207 More specific information on configuring the driver is in 208 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>. 209 210 To compile this driver as a module, choose M here. The module 211 will be called ixgbevf. MSI-X interrupt support is required 212 for this driver to work correctly. 213 214config IXGBEVF_IPSEC 215 bool "IPSec XFRM cryptography-offload acceleration" 216 depends on IXGBEVF 217 depends on XFRM_OFFLOAD 218 default y 219 select XFRM_ALGO 220 help 221 Enable support for IPSec offload in ixgbevf.ko 222 223config I40E 224 tristate "Intel(R) Ethernet Controller XL710 Family support" 225 depends on PTP_1588_CLOCK_OPTIONAL 226 depends on PCI 227 select AUXILIARY_BUS 228 help 229 This driver supports Intel(R) Ethernet Controller XL710 Family of 230 devices. For more information on how to identify your adapter, go 231 to the Adapter & Driver ID Guide that can be located at: 232 233 <http://support.intel.com> 234 235 More specific information on configuring the driver is in 236 <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>. 237 238 To compile this driver as a module, choose M here. The module 239 will be called i40e. 240 241config I40E_DCB 242 bool "Data Center Bridging (DCB) Support" 243 default n 244 depends on I40E && DCB 245 help 246 Say Y here if you want to use Data Center Bridging (DCB) in the 247 driver. 248 249 If unsure, say N. 250 251# this is here to allow seamless migration from I40EVF --> IAVF name 252# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF 253config IAVF 254 tristate 255config I40EVF 256 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 257 select IAVF 258 depends on PCI_MSI 259 help 260 This driver supports virtual functions for Intel XL710, 261 X710, X722, XXV710, and all devices advertising support for 262 Intel Ethernet Adaptive Virtual Function devices. For more 263 information on how to identify your adapter, go to the Adapter 264 & Driver ID Guide that can be located at: 265 266 <https://support.intel.com> 267 268 This driver was formerly named i40evf. 269 270 More specific information on configuring the driver is in 271 <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>. 272 273 To compile this driver as a module, choose M here. The module 274 will be called iavf. MSI-X interrupt support is required 275 for this driver to work correctly. 276 277config ICE 278 tristate "Intel(R) Ethernet Connection E800 Series Support" 279 default n 280 depends on PCI_MSI 281 depends on PTP_1588_CLOCK_OPTIONAL 282 depends on GNSS || GNSS = n 283 select AUXILIARY_BUS 284 select DIMLIB 285 select NET_DEVLINK 286 select PLDMFW 287 help 288 This driver supports Intel(R) Ethernet Connection E800 Series of 289 devices. For more information on how to identify your adapter, go 290 to the Adapter & Driver ID Guide that can be located at: 291 292 <http://support.intel.com> 293 294 More specific information on configuring the driver is in 295 <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>. 296 297 To compile this driver as a module, choose M here. The module 298 will be called ice. 299 300config ICE_SWITCHDEV 301 bool "Switchdev Support" 302 default y 303 depends on ICE && NET_SWITCHDEV 304 help 305 Switchdev support provides internal SRIOV packet steering and switching. 306 307 To enable it on running kernel use devlink tool: 308 #devlink dev eswitch set pci/0000:XX:XX.X mode switchdev 309 310 Say Y here if you want to use Switchdev in the driver. 311 312 If unsure, say N. 313 314config ICE_HWTS 315 bool "Support HW cross-timestamp on platforms with PTM support" 316 default y 317 depends on ICE && X86 318 help 319 Say Y to enable hardware supported cross-timestamping on platforms 320 with PCIe PTM support. The cross-timestamp is available through 321 the PTP clock driver precise cross-timestamp ioctl 322 (PTP_SYS_OFFSET_PRECISE). 323 324config FM10K 325 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 326 default n 327 depends on PCI_MSI 328 depends on PTP_1588_CLOCK_OPTIONAL 329 help 330 This driver supports Intel(R) FM10000 Ethernet Switch Host 331 Interface. For more information on how to identify your adapter, 332 go to the Adapter & Driver ID Guide that can be located at: 333 334 <http://support.intel.com> 335 336 More specific information on configuring the driver is in 337 <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>. 338 339 To compile this driver as a module, choose M here. The module 340 will be called fm10k. MSI-X interrupt support is required 341 342config IGC 343 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" 344 default n 345 depends on PCI 346 depends on PTP_1588_CLOCK_OPTIONAL 347 help 348 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V 349 family of adapters. 350 351 For more information on how to identify your adapter, go 352 to the Adapter & Driver ID Guide that can be located at: 353 354 <http://support.intel.com> 355 356 To compile this driver as a module, choose M here. The module 357 will be called igc. 358 359endif # NET_VENDOR_INTEL 360