1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on X86 && DMI 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on X86 && DMI 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1021 109 tristate "Analog Devices ADM1021 and compatibles" 110 depends on I2C 111 depends on SENSORS_LM90=n 112 help 113 If you say yes here you get support for Analog Devices ADM1021 114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 116 117 This driver can also be built as a module. If so, the module 118 will be called adm1021. 119 120config SENSORS_ADM1025 121 tristate "Analog Devices ADM1025 and compatibles" 122 depends on I2C 123 select HWMON_VID 124 help 125 If you say yes here you get support for Analog Devices ADM1025 126 and Philips NE1619 sensor chips. 127 128 This driver can also be built as a module. If so, the module 129 will be called adm1025. 130 131config SENSORS_ADM1026 132 tristate "Analog Devices ADM1026 and compatibles" 133 depends on I2C 134 select HWMON_VID 135 help 136 If you say yes here you get support for Analog Devices ADM1026 137 sensor chip. 138 139 This driver can also be built as a module. If so, the module 140 will be called adm1026. 141 142config SENSORS_ADM1029 143 tristate "Analog Devices ADM1029" 144 depends on I2C 145 help 146 If you say yes here you get support for Analog Devices ADM1029 147 sensor chip. 148 Very rare chip, please let us know you use it. 149 150 This driver can also be built as a module. If so, the module 151 will be called adm1029. 152 153config SENSORS_ADM1031 154 tristate "Analog Devices ADM1031 and compatibles" 155 depends on I2C 156 help 157 If you say yes here you get support for Analog Devices ADM1031 158 and ADM1030 sensor chips. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1031. 162 163config SENSORS_ADM1177 164 tristate "Analog Devices ADM1177 and compatibles" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1177 168 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm1177. 172 173config SENSORS_ADM9240 174 tristate "Analog Devices ADM9240 and compatibles" 175 depends on I2C 176 select HWMON_VID 177 help 178 If you say yes here you get support for Analog Devices ADM9240, 179 Dallas DS1780, National Semiconductor LM81 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm9240. 183 184config SENSORS_ADT7X10 185 tristate 186 select REGMAP 187 help 188 This module contains common code shared by the ADT7310/ADT7320 and 189 ADT7410/ADT7420 temperature monitoring chip drivers. 190 191 If built as a module, the module will be called adt7x10. 192 193config SENSORS_ADT7310 194 tristate "Analog Devices ADT7310/ADT7320" 195 depends on SPI_MASTER 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7310 and ADT7320 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7310. 203 204config SENSORS_ADT7410 205 tristate "Analog Devices ADT7410/ADT7420" 206 depends on I2C 207 select SENSORS_ADT7X10 208 help 209 If you say yes here you get support for the Analog Devices 210 ADT7410 and ADT7420 temperature monitoring chips. 211 212 This driver can also be built as a module. If so, the module 213 will be called adt7410. 214 215config SENSORS_ADT7411 216 tristate "Analog Devices ADT7411" 217 depends on I2C 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7411 voltage and temperature monitoring chip. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7411. 224 225config SENSORS_ADT7462 226 tristate "Analog Devices ADT7462" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7462 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7462. 234 235config SENSORS_ADT7470 236 tristate "Analog Devices ADT7470" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7470 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7470. 244 245config SENSORS_ADT7475 246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 247 depends on I2C 248 select HWMON_VID 249 help 250 If you say yes here you get support for the Analog Devices 251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 252 chips. 253 254 This driver can also be built as a module. If so, the module 255 will be called adt7475. 256 257config SENSORS_AHT10 258 tristate "Aosong AHT10, AHT20" 259 depends on I2C 260 select CRC8 261 help 262 If you say yes here, you get support for the Aosong AHT10 and AHT20 263 temperature and humidity sensors 264 265 This driver can also be built as a module. If so, the module 266 will be called aht10. 267 268config SENSORS_AQUACOMPUTER_D5NEXT 269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 270 depends on USB_HID 271 select CRC16 272 help 273 If you say yes here you get support for sensors and fans of 274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 276 Next sensor, where available. 277 278 This driver can also be built as a module. If so, the module 279 will be called aquacomputer_d5next. 280 281config SENSORS_AS370 282 tristate "Synaptics AS370 SoC hardware monitoring driver" 283 help 284 If you say yes here you get support for the PVT sensors of 285 the Synaptics AS370 SoC 286 287 This driver can also be built as a module. If so, the module 288 will be called as370-hwmon. 289 290 291config SENSORS_ASC7621 292 tristate "Andigilog aSC7621" 293 depends on I2C 294 help 295 If you say yes here you get support for the aSC7621 296 family of SMBus sensors chip found on most Intel X38, X48, X58, 297 945, 965 and 975 desktop boards. Currently supported chips: 298 aSC7621 299 aSC7621a 300 301 This driver can also be built as a module. If so, the module 302 will be called asc7621. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ASPEED_G6 416 tristate "ASPEED g6 PWM and Fan tach driver" 417 depends on ARCH_ASPEED || COMPILE_TEST 418 depends on PWM 419 help 420 This driver provides support for ASPEED G6 PWM and Fan Tach 421 controllers. 422 423 This driver can also be built as a module. If so, the module 424 will be called aspeed_pwm_tacho. 425 426config SENSORS_ATXP1 427 tristate "Attansic ATXP1 VID controller" 428 depends on I2C 429 select HWMON_VID 430 help 431 If you say yes here you get support for the Attansic ATXP1 VID 432 controller. 433 434 If your board have such a chip, you are able to control your CPU 435 core and other voltages. 436 437 This driver can also be built as a module. If so, the module 438 will be called atxp1. 439 440config SENSORS_BT1_PVT 441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 443 select POLYNOMIAL 444 help 445 If you say yes here you get support for Baikal-T1 PVT sensor 446 embedded into the SoC. 447 448 This driver can also be built as a module. If so, the module will be 449 called bt1-pvt. 450 451config SENSORS_BT1_PVT_ALARMS 452 bool "Enable Baikal-T1 PVT sensor alarms" 453 depends on SENSORS_BT1_PVT 454 help 455 Baikal-T1 PVT IP-block provides threshold registers for each 456 supported sensor. But the corresponding interrupts might be 457 generated by the thresholds comparator only in synchronization with 458 a data conversion. Additionally there is only one sensor data can 459 be converted at a time. All of these makes the interface impossible 460 to be used for the hwmon alarms implementation without periodic 461 switch between the PVT sensors. By default the data conversion is 462 performed on demand from the user-space. If this config is enabled 463 the data conversion will be periodically performed and the data will be 464 saved in the internal driver cache. 465 466config SENSORS_CORSAIR_CPRO 467 tristate "Corsair Commander Pro controller" 468 depends on HID 469 help 470 If you say yes here you get support for the Corsair Commander Pro 471 controller. 472 473 This driver can also be built as a module. If so, the module 474 will be called corsair-cpro. 475 476config SENSORS_CORSAIR_PSU 477 tristate "Corsair PSU HID controller" 478 depends on HID 479 help 480 If you say yes here you get support for Corsair PSUs with a HID 481 interface. 482 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 483 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 484 by Corsair. 485 486 This driver can also be built as a module. If so, the module 487 will be called corsair-psu. 488 489config SENSORS_DRIVETEMP 490 tristate "Hard disk drives with temperature sensors" 491 depends on SCSI && ATA 492 help 493 If you say yes you get support for the temperature sensor on 494 hard disk drives. 495 496 This driver can also be built as a module. If so, the module 497 will be called drivetemp. 498 499config SENSORS_DS620 500 tristate "Dallas Semiconductor DS620" 501 depends on I2C 502 help 503 If you say yes here you get support for Dallas Semiconductor 504 DS620 sensor chip. 505 506 This driver can also be built as a module. If so, the module 507 will be called ds620. 508 509config SENSORS_DS1621 510 tristate "Dallas Semiconductor DS1621 and compatibles" 511 depends on I2C 512 help 513 If you say yes here you get support for Dallas Semiconductor/Maxim 514 Integrated DS1621 sensor chips and compatible models including: 515 516 - Dallas Semiconductor DS1625 517 - Maxim Integrated DS1631 518 - Maxim Integrated DS1721 519 - Maxim Integrated DS1731 520 521 This driver can also be built as a module. If so, the module 522 will be called ds1621. 523 524config SENSORS_DELL_SMM 525 tristate "Dell laptop SMM BIOS hwmon driver" 526 depends on X86 527 imply THERMAL 528 help 529 This hwmon driver adds support for reporting temperature of different 530 sensors and controls the fans on Dell laptops via System Management 531 Mode provided by Dell BIOS. 532 533 When option I8K is also enabled this driver provides legacy /proc/i8k 534 userspace interface for i8kutils package. 535 536config I8K 537 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 538 depends on SENSORS_DELL_SMM 539 depends on PROC_FS 540 help 541 This option enables the legacy /proc/i8k userspace interface of the 542 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 543 version, temperatures and allows control of fan speeds of some Dell 544 laptops. Sometimes it also reports power and hotkey status. 545 546 This interface is required to run programs from the i8kutils package. 547 548 Say Y if you intend to run userspace programs that use this interface. 549 Say N otherwise. 550 551config SENSORS_DA9052_ADC 552 tristate "Dialog DA9052/DA9053 ADC" 553 depends on PMIC_DA9052 554 help 555 Say y here to support the ADC found on Dialog Semiconductor 556 DA9052-BC and DA9053-AA/Bx PMICs. 557 558 This driver can also be built as module. If so, the module 559 will be called da9052-hwmon. 560 561config SENSORS_DA9055 562 tristate "Dialog Semiconductor DA9055 ADC" 563 depends on MFD_DA9055 564 help 565 If you say yes here you get support for ADC on the Dialog 566 Semiconductor DA9055 PMIC. 567 568 This driver can also be built as a module. If so, the module 569 will be called da9055-hwmon. 570 571config SENSORS_I5K_AMB 572 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 573 depends on PCI 574 help 575 If you say yes here you get support for FB-DIMM AMB temperature 576 monitoring chips on systems with the Intel 5000 series chipset. 577 578 This driver can also be built as a module. If so, the module 579 will be called i5k_amb. 580 581config SENSORS_SPARX5 582 tristate "Sparx5 SoC temperature sensor" 583 depends on ARCH_SPARX5 || COMPILE_TEST 584 help 585 If you say yes here you get support for temperature monitoring 586 with the Microchip Sparx5 SoC. 587 588 This driver can also be built as a module. If so, the module 589 will be called sparx5-temp. 590 591config SENSORS_F71805F 592 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 593 depends on !PPC 594 help 595 If you say yes here you get support for hardware monitoring 596 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 597 Super-I/O chips. 598 599 This driver can also be built as a module. If so, the module 600 will be called f71805f. 601 602config SENSORS_F71882FG 603 tristate "Fintek F71882FG and compatibles" 604 depends on !PPC 605 help 606 If you say yes here you get support for hardware monitoring 607 features of many Fintek Super-I/O (LPC) chips. The currently 608 supported chips are: 609 F71808E/A 610 F71858FG 611 F71862FG 612 F71863FG 613 F71869F/E/A 614 F71882FG 615 F71883FG 616 F71889FG/ED/A 617 F8000 618 F81801U 619 F81865F 620 621 This driver can also be built as a module. If so, the module 622 will be called f71882fg. 623 624config SENSORS_F75375S 625 tristate "Fintek F75375S/SP, F75373 and F75387" 626 depends on I2C 627 help 628 If you say yes here you get support for hardware monitoring 629 features of the Fintek F75375S/SP, F75373 and F75387 630 631 This driver can also be built as a module. If so, the module 632 will be called f75375s. 633 634config SENSORS_GSC 635 tristate "Gateworks System Controller ADC" 636 depends on MFD_GATEWORKS_GSC 637 help 638 Support for the Gateworks System Controller A/D converters. 639 640 To compile this driver as a module, choose M here: 641 the module will be called gsc-hwmon. 642 643config SENSORS_MC13783_ADC 644 tristate "Freescale MC13783/MC13892 ADC" 645 depends on MFD_MC13XXX 646 help 647 Support for the A/D converter on MC13783 and MC13892 PMIC. 648 649config SENSORS_FSCHMD 650 tristate "Fujitsu Siemens Computers sensor chips" 651 depends on (X86 || COMPILE_TEST) && I2C 652 help 653 If you say yes here you get support for the following Fujitsu 654 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 655 Heimdall, Heracles, Hades and Syleus including support for the 656 integrated watchdog. 657 658 This is a merged driver for FSC sensor chips replacing the fscpos, 659 fscscy and fscher drivers and adding support for several other FSC 660 sensor chips. 661 662 This driver can also be built as a module. If so, the module 663 will be called fschmd. 664 665config SENSORS_FTSTEUTATES 666 tristate "Fujitsu Technology Solutions sensor chip Teutates" 667 depends on I2C && WATCHDOG 668 select WATCHDOG_CORE 669 help 670 If you say yes here you get support for the Fujitsu Technology 671 Solutions (FTS) sensor chip "Teutates" including support for 672 the integrated watchdog. 673 674 This driver can also be built as a module. If so, the module 675 will be called ftsteutates. 676 677config SENSORS_GL518SM 678 tristate "Genesys Logic GL518SM" 679 depends on I2C 680 help 681 If you say yes here you get support for Genesys Logic GL518SM 682 sensor chips. 683 684 This driver can also be built as a module. If so, the module 685 will be called gl518sm. 686 687config SENSORS_GL520SM 688 tristate "Genesys Logic GL520SM" 689 depends on I2C 690 select HWMON_VID 691 help 692 If you say yes here you get support for Genesys Logic GL520SM 693 sensor chips. 694 695 This driver can also be built as a module. If so, the module 696 will be called gl520sm. 697 698config SENSORS_G760A 699 tristate "GMT G760A" 700 depends on I2C 701 help 702 If you say yes here you get support for Global Mixed-mode 703 Technology Inc G760A fan speed PWM controller chips. 704 705 This driver can also be built as a module. If so, the module 706 will be called g760a. 707 708config SENSORS_G762 709 tristate "GMT G762 and G763" 710 depends on I2C 711 help 712 If you say yes here you get support for Global Mixed-mode 713 Technology Inc G762 and G763 fan speed PWM controller chips. 714 715 This driver can also be built as a module. If so, the module 716 will be called g762. 717 718config SENSORS_GPIO_FAN 719 tristate "GPIO fan" 720 depends on OF_GPIO 721 depends on GPIOLIB || COMPILE_TEST 722 depends on THERMAL || THERMAL=n 723 help 724 If you say yes here you get support for fans connected to GPIO lines. 725 726 This driver can also be built as a module. If so, the module 727 will be called gpio-fan. 728 729config SENSORS_GXP_FAN_CTRL 730 tristate "HPE GXP fan controller" 731 depends on ARCH_HPE_GXP || COMPILE_TEST 732 help 733 If you say yes here you get support for GXP fan control functionality. 734 735 The GXP controls fan function via the CPLD through the use of PWM 736 registers. This driver reports status and pwm setting of the fans. 737 738config SENSORS_HIH6130 739 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 740 depends on I2C 741 help 742 If you say yes here you get support for Honeywell Humidicon 743 HIH-6130 and HIH-6131 Humidicon humidity sensors. 744 745 This driver can also be built as a module. If so, the module 746 will be called hih6130. 747 748config SENSORS_HS3001 749 tristate "Renesas HS3001 humidity and temperature sensors" 750 depends on I2C 751 help 752 If you say yes here you get support for the Renesas HS3001, 753 to HS3004 humidity and temperature sensors. 754 755 This driver can also be built as a module. If so, the module 756 will be called hs3001. 757 758config SENSORS_IBMAEM 759 tristate "IBM Active Energy Manager temperature/power sensors and control" 760 select IPMI_SI 761 depends on IPMI_HANDLER 762 help 763 If you say yes here you get support for the temperature and 764 power sensors and capping hardware in various IBM System X 765 servers that support Active Energy Manager. This includes 766 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 767 and certain HC10/HS2x/LS2x/QS2x blades. 768 769 This driver can also be built as a module. If so, the module 770 will be called ibmaem. 771 772config SENSORS_IBMPEX 773 tristate "IBM PowerExecutive temperature/power sensors" 774 select IPMI_SI 775 depends on IPMI_HANDLER 776 help 777 If you say yes here you get support for the temperature and 778 power sensors in various IBM System X servers that support 779 PowerExecutive. So far this includes the x3350, x3550, x3650, 780 x3655, and x3755; the x3800, x3850, and x3950 models that have 781 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 782 783 This driver can also be built as a module. If so, the module 784 will be called ibmpex. 785 786config SENSORS_IBMPOWERNV 787 tristate "IBM POWERNV platform sensors" 788 depends on PPC_POWERNV 789 default y 790 help 791 If you say yes here you get support for the temperature/fan/power 792 sensors on your PowerNV platform. 793 794 This driver can also be built as a module. If so, the module 795 will be called ibmpowernv. 796 797config SENSORS_IIO_HWMON 798 tristate "Hwmon driver that uses channels specified via iio maps" 799 depends on IIO 800 help 801 This is a platform driver that in combination with a suitable 802 map allows IIO devices to provide basic hwmon functionality 803 for those channels specified in the map. This map can be provided 804 either via platform data or the device tree bindings. 805 806config SENSORS_I5500 807 tristate "Intel 5500/5520/X58 temperature sensor" 808 depends on X86 && PCI 809 help 810 If you say yes here you get support for the temperature 811 sensor inside the Intel 5500, 5520 and X58 chipsets. 812 813 This driver can also be built as a module. If so, the module 814 will be called i5500_temp. 815 816config SENSORS_CORETEMP 817 tristate "Intel Core/Core2/Atom temperature sensor" 818 depends on X86 819 help 820 If you say yes here you get support for the temperature 821 sensor inside your CPU. Most of the family 6 CPUs 822 are supported. Check Documentation/hwmon/coretemp.rst for details. 823 824config SENSORS_IT87 825 tristate "ITE IT87xx and compatibles" 826 depends on !PPC 827 select HWMON_VID 828 help 829 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 830 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 831 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 832 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 833 clone. 834 835 This driver can also be built as a module. If so, the module 836 will be called it87. 837 838config SENSORS_JC42 839 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 840 depends on I2C 841 select REGMAP_I2C 842 help 843 If you say yes here, you get support for JEDEC JC42.4 compliant 844 temperature sensors, which are used on many DDR3 memory modules for 845 mobile devices and servers. Support will include, but not be limited 846 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 847 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 848 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 849 850 This driver can also be built as a module. If so, the module 851 will be called jc42. 852 853config SENSORS_POWR1220 854 tristate "Lattice POWR1220 Power Monitoring" 855 depends on I2C 856 help 857 If you say yes here you get access to the hardware monitoring 858 functions of the Lattice POWR1220 isp Power Supply Monitoring, 859 Sequencing and Margining Controller. 860 861 This driver can also be built as a module. If so, the module 862 will be called powr1220. 863 864config SENSORS_LAN966X 865 tristate "Microchip LAN966x Hardware Monitoring" 866 depends on SOC_LAN966 || COMPILE_TEST 867 select REGMAP 868 select POLYNOMIAL 869 help 870 If you say yes here you get support for temperature monitoring 871 on the Microchip LAN966x SoC. 872 873 This driver can also be built as a module. If so, the module 874 will be called lan966x-hwmon. 875 876config SENSORS_LINEAGE 877 tristate "Lineage Compact Power Line Power Entry Module" 878 depends on I2C 879 help 880 If you say yes here you get support for the Lineage Compact Power Line 881 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 882 CP2000DC, CP2725, and others. 883 884 This driver can also be built as a module. If so, the module 885 will be called lineage-pem. 886 887config SENSORS_LOCHNAGAR 888 tristate "Lochnagar Hardware Monitor" 889 depends on MFD_LOCHNAGAR 890 help 891 If you say yes here you get support for Lochnagar 2 temperature, 892 voltage and current sensors abilities. 893 894 This driver can also be built as a module. If so, the module 895 will be called lochnagar-hwmon. 896 897config SENSORS_LTC2945 898 tristate "Linear Technology LTC2945" 899 depends on I2C 900 select REGMAP_I2C 901 help 902 If you say yes here you get support for Linear Technology LTC2945 903 I2C System Monitor. 904 905 This driver can also be built as a module. If so, the module will 906 be called ltc2945. 907 908config SENSORS_LTC2947 909 tristate 910 911config SENSORS_LTC2947_I2C 912 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 913 depends on I2C 914 select REGMAP_I2C 915 select SENSORS_LTC2947 916 help 917 If you say yes here you get support for Linear Technology LTC2947 918 I2C High Precision Power and Energy Monitor 919 920 This driver can also be built as a module. If so, the module will 921 be called ltc2947-i2c. 922 923config SENSORS_LTC2947_SPI 924 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 925 depends on SPI_MASTER 926 select REGMAP_SPI 927 select SENSORS_LTC2947 928 help 929 If you say yes here you get support for Linear Technology LTC2947 930 SPI High Precision Power and Energy Monitor 931 932 This driver can also be built as a module. If so, the module will 933 be called ltc2947-spi. 934 935config SENSORS_LTC2990 936 tristate "Linear Technology LTC2990" 937 depends on I2C 938 help 939 If you say yes here you get support for Linear Technology LTC2990 940 I2C System Monitor. The LTC2990 supports a combination of voltage, 941 current and temperature monitoring. 942 943 This driver can also be built as a module. If so, the module will 944 be called ltc2990. 945 946config SENSORS_LTC2992 947 tristate "Linear Technology LTC2992" 948 depends on I2C 949 depends on GPIOLIB 950 help 951 If you say yes here you get support for Linear Technology LTC2992 952 I2C System Monitor. The LTC2992 measures current, voltage, and 953 power of two supplies. 954 955 This driver can also be built as a module. If so, the module will 956 be called ltc2992. 957 958config SENSORS_LTC4151 959 tristate "Linear Technology LTC4151" 960 depends on I2C 961 help 962 If you say yes here you get support for Linear Technology LTC4151 963 High Voltage I2C Current and Voltage Monitor interface. 964 965 This driver can also be built as a module. If so, the module will 966 be called ltc4151. 967 968config SENSORS_LTC4215 969 tristate "Linear Technology LTC4215" 970 depends on I2C 971 help 972 If you say yes here you get support for Linear Technology LTC4215 973 Hot Swap Controller I2C interface. 974 975 This driver can also be built as a module. If so, the module will 976 be called ltc4215. 977 978config SENSORS_LTC4222 979 tristate "Linear Technology LTC4222" 980 depends on I2C 981 select REGMAP_I2C 982 help 983 If you say yes here you get support for Linear Technology LTC4222 984 Dual Hot Swap Controller I2C interface. 985 986 This driver can also be built as a module. If so, the module will 987 be called ltc4222. 988 989config SENSORS_LTC4245 990 tristate "Linear Technology LTC4245" 991 depends on I2C 992 help 993 If you say yes here you get support for Linear Technology LTC4245 994 Multiple Supply Hot Swap Controller I2C interface. 995 996 This driver can also be built as a module. If so, the module will 997 be called ltc4245. 998 999config SENSORS_LTC4260 1000 tristate "Linear Technology LTC4260" 1001 depends on I2C 1002 select REGMAP_I2C 1003 help 1004 If you say yes here you get support for Linear Technology LTC4260 1005 Positive Voltage Hot Swap Controller I2C interface. 1006 1007 This driver can also be built as a module. If so, the module will 1008 be called ltc4260. 1009 1010config SENSORS_LTC4261 1011 tristate "Linear Technology LTC4261" 1012 depends on I2C 1013 help 1014 If you say yes here you get support for Linear Technology LTC4261 1015 Negative Voltage Hot Swap Controller I2C interface. 1016 1017 This driver can also be built as a module. If so, the module will 1018 be called ltc4261. 1019 1020config SENSORS_LTQ_CPUTEMP 1021 bool "Lantiq cpu temperature sensor driver" 1022 depends on SOC_XWAY 1023 help 1024 If you say yes here you get support for the temperature 1025 sensor inside your CPU. 1026 1027config SENSORS_MAX1111 1028 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1029 depends on SPI_MASTER 1030 help 1031 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1032 ADC chips. 1033 1034 This driver can also be built as a module. If so, the module 1035 will be called max1111. 1036 1037config SENSORS_MAX127 1038 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1039 depends on I2C 1040 help 1041 Say y here to support Maxim's MAX127 DAS chips. 1042 1043 This driver can also be built as a module. If so, the module 1044 will be called max127. 1045 1046config SENSORS_MAX16065 1047 tristate "Maxim MAX16065 System Manager and compatibles" 1048 depends on I2C 1049 help 1050 If you say yes here you get support for hardware monitoring 1051 capabilities of the following Maxim System Manager chips. 1052 MAX16065 1053 MAX16066 1054 MAX16067 1055 MAX16068 1056 MAX16070 1057 MAX16071 1058 1059 This driver can also be built as a module. If so, the module 1060 will be called max16065. 1061 1062config SENSORS_MAX1619 1063 tristate "Maxim MAX1619 sensor chip" 1064 depends on I2C 1065 help 1066 If you say yes here you get support for MAX1619 sensor chip. 1067 1068 This driver can also be built as a module. If so, the module 1069 will be called max1619. 1070 1071config SENSORS_MAX1668 1072 tristate "Maxim MAX1668 and compatibles" 1073 depends on I2C 1074 help 1075 If you say yes here you get support for MAX1668, MAX1989 and 1076 MAX1805 chips. 1077 1078 This driver can also be built as a module. If so, the module 1079 will be called max1668. 1080 1081config SENSORS_MAX197 1082 tristate "Maxim MAX197 and compatibles" 1083 help 1084 Support for the Maxim MAX197 A/D converter. 1085 Support will include, but not be limited to, MAX197, and MAX199. 1086 1087 This driver can also be built as a module. If so, the module 1088 will be called max197. 1089 1090config SENSORS_MAX31722 1091 tristate "MAX31722 temperature sensor" 1092 depends on SPI 1093 help 1094 Support for the Maxim Integrated MAX31722/MAX31723 digital 1095 thermometers/thermostats operating over an SPI interface. 1096 1097 This driver can also be built as a module. If so, the module 1098 will be called max31722. 1099 1100config SENSORS_MAX31730 1101 tristate "MAX31730 temperature sensor" 1102 depends on I2C 1103 help 1104 Support for the Maxim Integrated MAX31730 3-Channel Remote 1105 Temperature Sensor. 1106 1107 This driver can also be built as a module. If so, the module 1108 will be called max31730. 1109 1110config SENSORS_MAX31760 1111 tristate "MAX31760 fan speed controller" 1112 depends on I2C 1113 select REGMAP_I2C 1114 help 1115 Support for the Analog Devices MAX31760 Precision Fan-Speed 1116 Controller. MAX31760 integrates temperature sensing along with 1117 precision PWM fan control. 1118 1119 This driver can also be built as a module. If so, the module 1120 will be called max31760. 1121 1122config MAX31827 1123 tristate "MAX31827 low-power temperature switch and similar devices" 1124 depends on I2C 1125 select REGMAP_I2C 1126 help 1127 If you say yes here you get support for MAX31827, MAX31828 and 1128 MAX31829 low-power temperature switches and sensors connected with I2C. 1129 1130 This driver can also be built as a module. If so, the module 1131 will be called max31827. 1132 1133config SENSORS_MAX6620 1134 tristate "Maxim MAX6620 fan controller" 1135 depends on I2C 1136 help 1137 If you say yes here you get support for the MAX6620 1138 fan controller. 1139 1140 This driver can also be built as a module. If so, the module 1141 will be called max6620. 1142 1143config SENSORS_MAX6621 1144 tristate "Maxim MAX6621 sensor chip" 1145 depends on I2C 1146 select REGMAP_I2C 1147 help 1148 If you say yes here you get support for MAX6621 sensor chip. 1149 MAX6621 is a PECI-to-I2C translator provides an efficient, 1150 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1151 It allows reading the temperature from the PECI-compliant 1152 host directly from up to four PECI-enabled CPUs. 1153 1154 This driver can also be built as a module. If so, the module 1155 will be called max6621. 1156 1157config SENSORS_MAX6639 1158 tristate "Maxim MAX6639 sensor chip" 1159 depends on I2C 1160 help 1161 If you say yes here you get support for the MAX6639 1162 sensor chips. 1163 1164 This driver can also be built as a module. If so, the module 1165 will be called max6639. 1166 1167config SENSORS_MAX6642 1168 tristate "Maxim MAX6642 sensor chip" 1169 depends on I2C 1170 depends on SENSORS_LM90=n 1171 help 1172 If you say yes here you get support for MAX6642 sensor chip. 1173 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor 1174 with Overtemperature Alarm from Maxim. 1175 1176 This driver can also be built as a module. If so, the module 1177 will be called max6642. 1178 1179config SENSORS_MAX6650 1180 tristate "Maxim MAX6650 sensor chip" 1181 depends on I2C 1182 depends on THERMAL || THERMAL=n 1183 help 1184 If you say yes here you get support for the MAX6650 / MAX6651 1185 sensor chips. 1186 1187 This driver can also be built as a module. If so, the module 1188 will be called max6650. 1189 1190config SENSORS_MAX6697 1191 tristate "Maxim MAX6697 and compatibles" 1192 depends on I2C 1193 help 1194 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1195 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1196 temperature sensor chips. 1197 1198 This driver can also be built as a module. If so, the module 1199 will be called max6697. 1200 1201config SENSORS_MAX31790 1202 tristate "Maxim MAX31790 sensor chip" 1203 depends on I2C 1204 help 1205 If you say yes here you get support for 6-Channel PWM-Output 1206 Fan RPM Controller. 1207 1208 This driver can also be built as a module. If so, the module 1209 will be called max31790. 1210 1211config SENSORS_MC34VR500 1212 tristate "NXP MC34VR500 hardware monitoring driver" 1213 depends on I2C 1214 help 1215 If you say yes here you get support for the temperature and input 1216 voltage sensors of the NXP MC34VR500. 1217 1218config SENSORS_MCP3021 1219 tristate "Microchip MCP3021 and compatibles" 1220 depends on I2C 1221 help 1222 If you say yes here you get support for MCP3021 and MCP3221. 1223 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1224 with 12-bit resolution. 1225 1226 This driver can also be built as a module. If so, the module 1227 will be called mcp3021. 1228 1229config SENSORS_MLXREG_FAN 1230 tristate "Mellanox FAN driver" 1231 depends on MELLANOX_PLATFORM 1232 imply THERMAL 1233 select REGMAP 1234 help 1235 This option enables support for the FAN control on the Mellanox 1236 Ethernet and InfiniBand switches. The driver can be activated by the 1237 platform device add call. Say Y to enable these. To compile this 1238 driver as a module, choose 'M' here: the module will be called 1239 mlxreg-fan. 1240 1241config SENSORS_TC654 1242 tristate "Microchip TC654/TC655 and compatibles" 1243 depends on I2C 1244 help 1245 If you say yes here you get support for TC654 and TC655. 1246 The TC654 and TC655 are PWM mode fan speed controllers with 1247 FanSense technology for use with brushless DC fans. 1248 1249 This driver can also be built as a module. If so, the module 1250 will be called tc654. 1251 1252config SENSORS_TPS23861 1253 tristate "Texas Instruments TPS23861 PoE PSE" 1254 depends on I2C 1255 select REGMAP_I2C 1256 help 1257 If you say yes here you get support for Texas Instruments 1258 TPS23861 802.3at PoE PSE chips. 1259 1260 This driver can also be built as a module. If so, the module 1261 will be called tps23861. 1262 1263config SENSORS_MENF21BMC_HWMON 1264 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1265 depends on MFD_MENF21BMC 1266 help 1267 Say Y here to include support for the MEN 14F021P00 BMC 1268 hardware monitoring. 1269 1270 This driver can also be built as a module. If so the module 1271 will be called menf21bmc_hwmon. 1272 1273config SENSORS_MR75203 1274 tristate "Moortec Semiconductor MR75203 PVT Controller" 1275 select REGMAP_MMIO 1276 help 1277 If you say yes here you get support for Moortec MR75203 1278 PVT controller. 1279 1280 This driver can also be built as a module. If so, the module 1281 will be called mr75203. 1282 1283config SENSORS_ADCXX 1284 tristate "National Semiconductor ADCxxxSxxx" 1285 depends on SPI_MASTER 1286 help 1287 If you say yes here you get support for the National Semiconductor 1288 ADC<bb><c>S<sss> chip family, where 1289 * bb is the resolution in number of bits (8, 10, 12) 1290 * c is the number of channels (1, 2, 4, 8) 1291 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1292 kSPS and 101 for 1 MSPS) 1293 1294 Examples : ADC081S101, ADC124S501, ... 1295 1296 This driver can also be built as a module. If so, the module 1297 will be called adcxx. 1298 1299config SENSORS_LM63 1300 tristate "National Semiconductor LM63 and compatibles" 1301 depends on I2C 1302 help 1303 If you say yes here you get support for the National 1304 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1305 sensors with integrated fan control. Such chips are found 1306 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1307 others. 1308 1309 This driver can also be built as a module. If so, the module 1310 will be called lm63. 1311 1312config SENSORS_LM70 1313 tristate "National Semiconductor LM70 and compatibles" 1314 depends on SPI_MASTER 1315 help 1316 If you say yes here you get support for the National Semiconductor 1317 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1318 TMP125 digital temperature sensor chips. 1319 1320 This driver can also be built as a module. If so, the module 1321 will be called lm70. 1322 1323config SENSORS_LM73 1324 tristate "National Semiconductor LM73" 1325 depends on I2C 1326 help 1327 If you say yes here you get support for National Semiconductor LM73 1328 sensor chips. 1329 This driver can also be built as a module. If so, the module 1330 will be called lm73. 1331 1332config SENSORS_LM75 1333 tristate "National Semiconductor LM75 and compatibles" 1334 depends on I2C 1335 select REGMAP_I2C 1336 help 1337 If you say yes here you get support for one common type of 1338 temperature sensor chip, with models including: 1339 1340 - Analog Devices ADT75 1341 - Atmel (now Microchip) AT30TS74 1342 - Dallas Semiconductor DS75, DS1775 and DS7505 1343 - Global Mixed-mode Technology (GMT) G751 1344 - Maxim MAX6625 and MAX6626 1345 - Microchip MCP980x 1346 - National Semiconductor LM75, LM75A 1347 - NXP's LM75A 1348 - ST Microelectronics STDS75 1349 - ST Microelectronics STLM75 1350 - TelCom (now Microchip) TCN75 1351 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1352 TMP175, TMP275 1353 1354 This driver supports driver model based binding through board 1355 specific I2C device tables. 1356 1357 It also supports the "legacy" style of driver binding. To use 1358 that with some chips which don't replicate LM75 quirks exactly, 1359 you may need the "force" module parameter. 1360 1361 This driver can also be built as a module. If so, the module 1362 will be called lm75. 1363 1364config SENSORS_LM77 1365 tristate "National Semiconductor LM77" 1366 depends on I2C 1367 help 1368 If you say yes here you get support for National Semiconductor LM77 1369 sensor chips. 1370 1371 This driver can also be built as a module. If so, the module 1372 will be called lm77. 1373 1374config SENSORS_LM78 1375 tristate "National Semiconductor LM78 and compatibles" 1376 depends on I2C 1377 select HWMON_VID 1378 help 1379 If you say yes here you get support for National Semiconductor LM78, 1380 LM78-J and LM79. 1381 1382 This driver can also be built as a module. If so, the module 1383 will be called lm78. 1384 1385config SENSORS_LM80 1386 tristate "National Semiconductor LM80 and LM96080" 1387 depends on I2C 1388 help 1389 If you say yes here you get support for National Semiconductor 1390 LM80 and LM96080 sensor chips. 1391 1392 This driver can also be built as a module. If so, the module 1393 will be called lm80. 1394 1395config SENSORS_LM83 1396 tristate "National Semiconductor LM83 and compatibles" 1397 depends on I2C 1398 select REGMAP 1399 help 1400 If you say yes here you get support for National Semiconductor 1401 LM82 and LM83 sensor chips. 1402 1403 This driver can also be built as a module. If so, the module 1404 will be called lm83. 1405 1406config SENSORS_LM85 1407 tristate "National Semiconductor LM85 and compatibles" 1408 depends on I2C 1409 select HWMON_VID 1410 help 1411 If you say yes here you get support for National Semiconductor LM85 1412 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1413 EMC6D101, EMC6D102, and EMC6D103. 1414 1415 This driver can also be built as a module. If so, the module 1416 will be called lm85. 1417 1418config SENSORS_LM87 1419 tristate "National Semiconductor LM87 and compatibles" 1420 depends on I2C 1421 select HWMON_VID 1422 help 1423 If you say yes here you get support for National Semiconductor LM87 1424 and Analog Devices ADM1024 sensor chips. 1425 1426 This driver can also be built as a module. If so, the module 1427 will be called lm87. 1428 1429config SENSORS_LM90 1430 tristate "National Semiconductor LM90 and compatibles" 1431 depends on I2C 1432 help 1433 If you say yes here you get support for National Semiconductor LM84, 1434 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1435 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1436 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1437 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1438 MAX6696, 1439 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1440 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1441 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1442 sensor chips. 1443 1444 This driver can also be built as a module. If so, the module 1445 will be called lm90. 1446 1447config SENSORS_LM92 1448 tristate "National Semiconductor LM92 and compatibles" 1449 depends on I2C 1450 help 1451 If you say yes here you get support for National Semiconductor LM92 1452 and Maxim MAX6635 sensor chips. 1453 1454 This driver can also be built as a module. If so, the module 1455 will be called lm92. 1456 1457config SENSORS_LM93 1458 tristate "National Semiconductor LM93 and compatibles" 1459 depends on I2C 1460 select HWMON_VID 1461 help 1462 If you say yes here you get support for National Semiconductor LM93, 1463 LM94, and compatible sensor chips. 1464 1465 This driver can also be built as a module. If so, the module 1466 will be called lm93. 1467 1468config SENSORS_LM95234 1469 tristate "National Semiconductor LM95234 and compatibles" 1470 depends on I2C 1471 help 1472 If you say yes here you get support for the LM95233 and LM95234 1473 temperature sensor chips. 1474 1475 This driver can also be built as a module. If so, the module 1476 will be called lm95234. 1477 1478config SENSORS_LM95241 1479 tristate "National Semiconductor LM95241 and compatibles" 1480 depends on I2C 1481 help 1482 If you say yes here you get support for LM95231 and LM95241 sensor 1483 chips. 1484 1485 This driver can also be built as a module. If so, the module 1486 will be called lm95241. 1487 1488config SENSORS_LM95245 1489 tristate "National Semiconductor LM95245 and compatibles" 1490 depends on I2C 1491 select REGMAP_I2C 1492 help 1493 If you say yes here you get support for LM95235 and LM95245 1494 temperature sensor chips. 1495 1496 This driver can also be built as a module. If so, the module 1497 will be called lm95245. 1498 1499config SENSORS_PC87360 1500 tristate "National Semiconductor PC87360 family" 1501 depends on !PPC 1502 select HWMON_VID 1503 help 1504 If you say yes here you get access to the hardware monitoring 1505 functions of the National Semiconductor PC8736x Super-I/O chips. 1506 The PC87360, PC87363 and PC87364 only have fan monitoring and 1507 control. The PC87365 and PC87366 additionally have voltage and 1508 temperature monitoring. 1509 1510 This driver can also be built as a module. If so, the module 1511 will be called pc87360. 1512 1513config SENSORS_PC87427 1514 tristate "National Semiconductor PC87427" 1515 depends on !PPC 1516 help 1517 If you say yes here you get access to the hardware monitoring 1518 functions of the National Semiconductor PC87427 Super-I/O chip. 1519 The chip has two distinct logical devices, one for fan speed 1520 monitoring and control, and one for voltage and temperature 1521 monitoring. Fan speed monitoring and control are supported, as 1522 well as temperature monitoring. Voltages aren't supported yet. 1523 1524 This driver can also be built as a module. If so, the module 1525 will be called pc87427. 1526 1527config SENSORS_NTC_THERMISTOR 1528 tristate "NTC thermistor support" 1529 depends on IIO 1530 depends on THERMAL || !THERMAL_OF 1531 help 1532 This driver supports NTC thermistors sensor reading and its 1533 interpretation. The driver can also monitor the temperature and 1534 send notifications about the temperature. 1535 1536 Currently, this driver supports 1537 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1538 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1539 B57891S0103 from EPCOS. 1540 1541 This driver can also be built as a module. If so, the module 1542 will be called ntc-thermistor. 1543 1544config SENSORS_NCT6683 1545 tristate "Nuvoton NCT6683D" 1546 depends on !PPC 1547 help 1548 If you say yes here you get support for the hardware monitoring 1549 functionality of the Nuvoton NCT6683D eSIO chip. 1550 1551 This driver can also be built as a module. If so, the module 1552 will be called nct6683. 1553 1554config SENSORS_NCT6775_CORE 1555 tristate 1556 select REGMAP 1557 help 1558 This module contains common code shared by the platform and 1559 i2c versions of the nct6775 driver; it is not useful on its 1560 own. 1561 1562 If built as a module, the module will be called 1563 nct6775-core. 1564 1565config SENSORS_NCT6775 1566 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1567 depends on !PPC 1568 depends on ACPI || ACPI=n 1569 select HWMON_VID 1570 select SENSORS_NCT6775_CORE 1571 help 1572 If you say yes here you get support for the hardware monitoring 1573 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1574 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1575 Super-I/O chips. This driver replaces the w83627ehf driver for 1576 NCT6775F and NCT6776F. 1577 1578 This driver can also be built as a module. If so, the module 1579 will be called nct6775. 1580 1581config SENSORS_NCT6775_I2C 1582 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1583 depends on I2C 1584 select REGMAP_I2C 1585 select SENSORS_NCT6775_CORE 1586 help 1587 If you say yes here you get support for the hardware monitoring 1588 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1589 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1590 Super-I/O chips via their I2C interface. 1591 1592 If you're not building a kernel for a BMC, this is probably 1593 not the driver you want (see CONFIG_SENSORS_NCT6775). 1594 1595 This driver can also be built as a module. If so, the module 1596 will be called nct6775-i2c. 1597 1598config SENSORS_NCT7802 1599 tristate "Nuvoton NCT7802Y" 1600 depends on I2C 1601 select REGMAP_I2C 1602 help 1603 If you say yes here you get support for the Nuvoton NCT7802Y 1604 hardware monitoring chip. 1605 1606 This driver can also be built as a module. If so, the module 1607 will be called nct7802. 1608 1609config SENSORS_NCT7904 1610 tristate "Nuvoton NCT7904" 1611 depends on I2C && WATCHDOG 1612 select WATCHDOG_CORE 1613 help 1614 If you say yes here you get support for the Nuvoton NCT7904 1615 hardware monitoring chip, including manual fan speed control 1616 and support for the integrated watchdog. 1617 1618 This driver can also be built as a module. If so, the module 1619 will be called nct7904. 1620 1621config SENSORS_NPCM7XX 1622 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1623 imply THERMAL 1624 help 1625 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1626 and Fan controllers. 1627 1628 This driver can also be built as a module. If so, the module 1629 will be called npcm750-pwm-fan. 1630 1631config SENSORS_NSA320 1632 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1633 depends on GPIOLIB && OF 1634 depends on MACH_KIRKWOOD || COMPILE_TEST 1635 help 1636 If you say yes here you get support for hardware monitoring 1637 for the ZyXEL NSA320 Media Server and other compatible devices 1638 (probably the NSA325 and some NSA310 variants). 1639 1640 The sensor data is taken from a Holtek HT46R065 microcontroller 1641 connected to GPIO lines. 1642 1643 This driver can also be built as a module. If so, the module 1644 will be called nsa320-hwmon. 1645 1646config SENSORS_NZXT_KRAKEN2 1647 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1648 depends on USB_HID 1649 help 1650 If you say yes here you get support for hardware monitoring for the 1651 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1652 1653 This driver can also be built as a module. If so, the module 1654 will be called nzxt-kraken2. 1655 1656config SENSORS_NZXT_SMART2 1657 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1658 depends on USB_HID 1659 help 1660 If you say yes here you get support for hardware monitoring for the 1661 NZXT RGB & Fan Controller/Smart Device v2. 1662 1663 This driver can also be built as a module. If so, the module 1664 will be called nzxt-smart2. 1665 1666source "drivers/hwmon/occ/Kconfig" 1667 1668config SENSORS_OXP 1669 tristate "OneXPlayer EC fan control" 1670 depends on ACPI 1671 depends on X86 1672 help 1673 If you say yes here you get support for fan readings and control over 1674 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1675 boards are supported. 1676 1677 Can also be built as a module. In that case it will be called oxp-sensors. 1678 1679config SENSORS_PCF8591 1680 tristate "Philips PCF8591 ADC/DAC" 1681 depends on I2C 1682 help 1683 If you say yes here you get support for Philips PCF8591 4-channel 1684 ADC, 1-channel DAC chips. 1685 1686 This driver can also be built as a module. If so, the module 1687 will be called pcf8591. 1688 1689 These devices are hard to detect and rarely found on mainstream 1690 hardware. If unsure, say N. 1691 1692source "drivers/hwmon/peci/Kconfig" 1693 1694source "drivers/hwmon/pmbus/Kconfig" 1695 1696config SENSORS_PWM_FAN 1697 tristate "PWM fan" 1698 depends on (PWM && OF) || COMPILE_TEST 1699 depends on THERMAL || THERMAL=n 1700 help 1701 If you say yes here you get support for fans connected to PWM lines. 1702 The driver uses the generic PWM interface, thus it will work on a 1703 variety of SoCs. 1704 1705 This driver can also be built as a module. If so, the module 1706 will be called pwm-fan. 1707 1708config SENSORS_RASPBERRYPI_HWMON 1709 tristate "Raspberry Pi voltage monitor" 1710 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1711 help 1712 If you say yes here you get support for voltage sensor on the 1713 Raspberry Pi. 1714 1715 This driver can also be built as a module. If so, the module 1716 will be called raspberrypi-hwmon. 1717 1718config SENSORS_SL28CPLD 1719 tristate "Kontron sl28cpld hardware monitoring driver" 1720 depends on MFD_SL28CPLD || COMPILE_TEST 1721 help 1722 If you say yes here you get support for the fan supervisor of the 1723 sl28cpld board management controller. 1724 1725 This driver can also be built as a module. If so, the module 1726 will be called sl28cpld-hwmon. 1727 1728config SENSORS_SBTSI 1729 tristate "Emulated SB-TSI temperature sensor" 1730 depends on I2C 1731 help 1732 If you say yes here you get support for emulated temperature 1733 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1734 1735 This driver can also be built as a module. If so, the module will 1736 be called sbtsi_temp. 1737 1738config SENSORS_SBRMI 1739 tristate "Emulated SB-RMI sensor" 1740 depends on I2C 1741 help 1742 If you say yes here you get support for emulated RMI 1743 sensors on AMD SoCs with APML interface connected to a BMC device. 1744 1745 This driver can also be built as a module. If so, the module will 1746 be called sbrmi. 1747 1748config SENSORS_SHT15 1749 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1750 depends on GPIOLIB || COMPILE_TEST 1751 select BITREVERSE 1752 help 1753 If you say yes here you get support for the Sensiron SHT10, SHT11, 1754 SHT15, SHT71, SHT75 humidity and temperature sensors. 1755 1756 This driver can also be built as a module. If so, the module 1757 will be called sht15. 1758 1759config SENSORS_SHT21 1760 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1761 depends on I2C 1762 help 1763 If you say yes here you get support for the Sensiron SHT21, SHT25 1764 humidity and temperature sensors. 1765 1766 This driver can also be built as a module. If so, the module 1767 will be called sht21. 1768 1769config SENSORS_SHT3x 1770 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1771 depends on I2C 1772 select CRC8 1773 help 1774 If you say yes here you get support for the Sensiron SHT30 and SHT31 1775 humidity and temperature sensors. 1776 1777 This driver can also be built as a module. If so, the module 1778 will be called sht3x. 1779 1780config SENSORS_SHT4x 1781 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1782 depends on I2C 1783 select CRC8 1784 help 1785 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1786 SHT45 humidity and temperature sensors. 1787 1788 This driver can also be built as a module. If so, the module 1789 will be called sht4x. 1790 1791config SENSORS_SHTC1 1792 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1793 depends on I2C 1794 help 1795 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1796 and SHTC3 humidity and temperature sensors. 1797 1798 This driver can also be built as a module. If so, the module 1799 will be called shtc1. 1800 1801config SENSORS_SIS5595 1802 tristate "Silicon Integrated Systems Corp. SiS5595" 1803 depends on PCI 1804 help 1805 If you say yes here you get support for the integrated sensors in 1806 SiS5595 South Bridges. 1807 1808 This driver can also be built as a module. If so, the module 1809 will be called sis5595. 1810 1811config SENSORS_SY7636A 1812 tristate "Silergy SY7636A" 1813 depends on MFD_SY7636A 1814 help 1815 If you say yes here you get support for the thermistor readout of 1816 the Silergy SY7636A PMIC. 1817 1818 This driver can also be built as a module. If so, the module 1819 will be called sy7636a-hwmon. 1820 1821config SENSORS_DME1737 1822 tristate "SMSC DME1737, SCH311x and compatibles" 1823 depends on I2C && !PPC 1824 select HWMON_VID 1825 help 1826 If you say yes here you get support for the hardware monitoring 1827 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1828 Asus A8000 Super-I/O chips. 1829 1830 This driver can also be built as a module. If so, the module 1831 will be called dme1737. 1832 1833config SENSORS_EMC1403 1834 tristate "SMSC EMC1403/23 thermal sensor" 1835 depends on I2C 1836 select REGMAP_I2C 1837 help 1838 If you say yes here you get support for the SMSC EMC1403/23 1839 temperature monitoring chip. 1840 1841 Threshold values can be configured using sysfs. 1842 Data from the different diodes are accessible via sysfs. 1843 1844config SENSORS_EMC2103 1845 tristate "SMSC EMC2103" 1846 depends on I2C 1847 help 1848 If you say yes here you get support for the temperature 1849 and fan sensors of the SMSC EMC2103 chips. 1850 1851 This driver can also be built as a module. If so, the module 1852 will be called emc2103. 1853 1854config SENSORS_EMC2305 1855 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1856 depends on I2C 1857 imply THERMAL 1858 help 1859 If you say yes here you get support for the Microchip EMC2305 1860 fan controller chips. 1861 The Microchip EMC2305 is a fan controller for up to 5 fans. 1862 Fan rotation speeds are reported in RPM. 1863 1864 This driver can also be built as a module. If so, the module 1865 will be called emc2305. 1866 1867config SENSORS_EMC6W201 1868 tristate "SMSC EMC6W201" 1869 depends on I2C 1870 help 1871 If you say yes here you get support for the SMSC EMC6W201 1872 hardware monitoring chip. 1873 1874 This driver can also be built as a module. If so, the module 1875 will be called emc6w201. 1876 1877config SENSORS_SMSC47M1 1878 tristate "SMSC LPC47M10x and compatibles" 1879 depends on !PPC 1880 help 1881 If you say yes here you get support for the integrated fan 1882 monitoring and control capabilities of the SMSC LPC47B27x, 1883 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1884 LPC47M192, LPC47M292 and LPC47M997 chips. 1885 1886 The temperature and voltage sensor features of the LPC47M15x, 1887 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1888 driver, select also "SMSC LPC47M192 and compatibles" below for 1889 those. 1890 1891 This driver can also be built as a module. If so, the module 1892 will be called smsc47m1. 1893 1894config SENSORS_SMSC47M192 1895 tristate "SMSC LPC47M192 and compatibles" 1896 depends on I2C 1897 select HWMON_VID 1898 help 1899 If you say yes here you get support for the temperature and 1900 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1901 and LPC47M997 chips. 1902 1903 The fan monitoring and control capabilities of these chips 1904 are supported by another driver, select 1905 "SMSC LPC47M10x and compatibles" above. You need both drivers 1906 if you want fan control and voltage/temperature sensor support. 1907 1908 This driver can also be built as a module. If so, the module 1909 will be called smsc47m192. 1910 1911config SENSORS_SMSC47B397 1912 tristate "SMSC LPC47B397-NC" 1913 depends on !PPC 1914 help 1915 If you say yes here you get support for the SMSC LPC47B397-NC 1916 sensor chip. 1917 1918 This driver can also be built as a module. If so, the module 1919 will be called smsc47b397. 1920 1921config SENSORS_SCH56XX_COMMON 1922 tristate 1923 1924config SENSORS_SCH5627 1925 tristate "SMSC SCH5627" 1926 depends on !PPC && WATCHDOG 1927 select SENSORS_SCH56XX_COMMON 1928 select WATCHDOG_CORE 1929 help 1930 If you say yes here you get support for the hardware monitoring 1931 features of the SMSC SCH5627 Super-I/O chip including support for 1932 the integrated watchdog. 1933 1934 This driver can also be built as a module. If so, the module 1935 will be called sch5627. 1936 1937config SENSORS_SCH5636 1938 tristate "SMSC SCH5636" 1939 depends on !PPC && WATCHDOG 1940 select SENSORS_SCH56XX_COMMON 1941 select WATCHDOG_CORE 1942 help 1943 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 1944 hardware monitoring solutions, allowing motherboard manufacturers to 1945 create their own custom hwmon solution based upon the SCH5636. 1946 1947 Currently this driver only supports the Fujitsu Theseus SCH5636 based 1948 hwmon solution. Say yes here if you want support for the Fujitsu 1949 Theseus' hardware monitoring features including support for the 1950 integrated watchdog. 1951 1952 This driver can also be built as a module. If so, the module 1953 will be called sch5636. 1954 1955config SENSORS_STTS751 1956 tristate "ST Microelectronics STTS751" 1957 depends on I2C 1958 help 1959 If you say yes here you get support for STTS751 1960 temperature sensor chips. 1961 1962 This driver can also be built as a module. If so, the module 1963 will be called stts751. 1964 1965config SENSORS_SFCTEMP 1966 tristate "Starfive JH71x0 temperature sensor" 1967 depends on ARCH_STARFIVE || COMPILE_TEST 1968 help 1969 If you say yes here you get support for temperature sensor 1970 on the Starfive JH71x0 SoCs. 1971 1972 This driver can also be built as a module. If so, the module 1973 will be called sfctemp. 1974 1975config SENSORS_ADC128D818 1976 tristate "Texas Instruments ADC128D818" 1977 depends on I2C 1978 help 1979 If you say yes here you get support for the Texas Instruments 1980 ADC128D818 System Monitor with Temperature Sensor chip. 1981 1982 This driver can also be built as a module. If so, the module 1983 will be called adc128d818. 1984 1985config SENSORS_ADS7828 1986 tristate "Texas Instruments ADS7828 and compatibles" 1987 depends on I2C 1988 select REGMAP_I2C 1989 help 1990 If you say yes here you get support for Texas Instruments ADS7828 and 1991 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 1992 it is 8-bit on ADS7830. 1993 1994 This driver can also be built as a module. If so, the module 1995 will be called ads7828. 1996 1997config SENSORS_ADS7871 1998 tristate "Texas Instruments ADS7871 A/D converter" 1999 depends on SPI 2000 help 2001 If you say yes here you get support for TI ADS7871 & ADS7870 2002 2003 This driver can also be built as a module. If so, the module 2004 will be called ads7871. 2005 2006config SENSORS_AMC6821 2007 tristate "Texas Instruments AMC6821" 2008 depends on I2C 2009 help 2010 If you say yes here you get support for the Texas Instruments 2011 AMC6821 hardware monitoring chips. 2012 2013 This driver can also be built as a module. If so, the module 2014 will be called amc6821. 2015 2016config SENSORS_INA209 2017 tristate "TI / Burr Brown INA209" 2018 depends on I2C 2019 help 2020 If you say yes here you get support for the TI / Burr Brown INA209 2021 voltage / current / power monitor I2C interface. 2022 2023 This driver can also be built as a module. If so, the module will 2024 be called ina209. 2025 2026config SENSORS_INA2XX 2027 tristate "Texas Instruments INA219 and compatibles" 2028 depends on I2C 2029 select REGMAP_I2C 2030 help 2031 If you say yes here you get support for INA219, INA220, INA226, 2032 INA230, and INA231 power monitor chips. 2033 2034 The INA2xx driver is configured for the default configuration of 2035 the part as described in the datasheet. 2036 Default value for Rshunt is 10 mOhms. 2037 This driver can also be built as a module. If so, the module 2038 will be called ina2xx. 2039 2040config SENSORS_INA238 2041 tristate "Texas Instruments INA238" 2042 depends on I2C 2043 select REGMAP_I2C 2044 help 2045 If you say yes here you get support for the INA238 power monitor 2046 chip. This driver supports voltage, current, power and temperature 2047 measurements as well as alarm configuration. 2048 2049 This driver can also be built as a module. If so, the module 2050 will be called ina238. 2051 2052config SENSORS_INA3221 2053 tristate "Texas Instruments INA3221 Triple Power Monitor" 2054 depends on I2C 2055 select REGMAP_I2C 2056 help 2057 If you say yes here you get support for the TI INA3221 Triple Power 2058 Monitor. 2059 2060 This driver can also be built as a module. If so, the module 2061 will be called ina3221. 2062 2063config SENSORS_TC74 2064 tristate "Microchip TC74" 2065 depends on I2C 2066 help 2067 If you say yes here you get support for Microchip TC74 single 2068 input temperature sensor chips. 2069 2070 This driver can also be built as a module. If so, the module 2071 will be called tc74. 2072 2073config SENSORS_THMC50 2074 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2075 depends on I2C 2076 help 2077 If you say yes here you get support for Texas Instruments THMC50 2078 sensor chips and clones: the Analog Devices ADM1022. 2079 2080 This driver can also be built as a module. If so, the module 2081 will be called thmc50. 2082 2083config SENSORS_TMP102 2084 tristate "Texas Instruments TMP102" 2085 depends on I2C 2086 select REGMAP_I2C 2087 help 2088 If you say yes here you get support for Texas Instruments TMP102 2089 sensor chips. 2090 2091 This driver can also be built as a module. If so, the module 2092 will be called tmp102. 2093 2094config SENSORS_TMP103 2095 tristate "Texas Instruments TMP103" 2096 depends on I2C 2097 select REGMAP_I2C 2098 help 2099 If you say yes here you get support for Texas Instruments TMP103 2100 sensor chips. 2101 2102 This driver can also be built as a module. If so, the module 2103 will be called tmp103. 2104 2105config SENSORS_TMP108 2106 tristate "Texas Instruments TMP108" 2107 depends on I2C 2108 select REGMAP_I2C 2109 help 2110 If you say yes here you get support for Texas Instruments TMP108 2111 sensor chips. 2112 2113 This driver can also be built as a module. If so, the module 2114 will be called tmp108. 2115 2116config SENSORS_TMP401 2117 tristate "Texas Instruments TMP401 and compatibles" 2118 depends on I2C 2119 select REGMAP 2120 help 2121 If you say yes here you get support for Texas Instruments TMP401, 2122 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2123 2124 This driver can also be built as a module. If so, the module 2125 will be called tmp401. 2126 2127config SENSORS_TMP421 2128 tristate "Texas Instruments TMP421 and compatible" 2129 depends on I2C 2130 help 2131 If you say yes here you get support for Texas Instruments TMP421, 2132 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2133 2134 This driver can also be built as a module. If so, the module 2135 will be called tmp421. 2136 2137config SENSORS_TMP464 2138 tristate "Texas Instruments TMP464 and compatible" 2139 depends on I2C 2140 select REGMAP_I2C 2141 help 2142 If you say yes here you get support for Texas Instruments TMP464 2143 and TMP468 temperature sensor chips. 2144 2145 This driver can also be built as a module. If so, the module 2146 will be called tmp464. 2147 2148config SENSORS_TMP513 2149 tristate "Texas Instruments TMP513 and compatibles" 2150 depends on I2C 2151 help 2152 If you say yes here you get support for Texas Instruments TMP512, 2153 and TMP513 temperature and power supply sensor chips. 2154 2155 This driver can also be built as a module. If so, the module 2156 will be called tmp513. 2157 2158config SENSORS_VEXPRESS 2159 tristate "Versatile Express" 2160 depends on VEXPRESS_CONFIG 2161 help 2162 This driver provides support for hardware sensors available on 2163 the ARM Ltd's Versatile Express platform. It can provide wide 2164 range of information like temperature, power, energy. 2165 2166config SENSORS_VIA_CPUTEMP 2167 tristate "VIA CPU temperature sensor" 2168 depends on X86 2169 select HWMON_VID 2170 help 2171 If you say yes here you get support for the temperature 2172 sensor inside your CPU. Supported are all known variants of 2173 the VIA C7 and Nano. 2174 2175config SENSORS_VIA686A 2176 tristate "VIA686A" 2177 depends on PCI 2178 help 2179 If you say yes here you get support for the integrated sensors in 2180 Via 686A/B South Bridges. 2181 2182 This driver can also be built as a module. If so, the module 2183 will be called via686a. 2184 2185config SENSORS_VT1211 2186 tristate "VIA VT1211" 2187 depends on !PPC 2188 select HWMON_VID 2189 help 2190 If you say yes here then you get support for hardware monitoring 2191 features of the VIA VT1211 Super-I/O chip. 2192 2193 This driver can also be built as a module. If so, the module 2194 will be called vt1211. 2195 2196config SENSORS_VT8231 2197 tristate "VIA VT8231" 2198 depends on PCI 2199 select HWMON_VID 2200 help 2201 If you say yes here then you get support for the integrated sensors 2202 in the VIA VT8231 device. 2203 2204 This driver can also be built as a module. If so, the module 2205 will be called vt8231. 2206 2207config SENSORS_W83773G 2208 tristate "Nuvoton W83773G" 2209 depends on I2C 2210 select REGMAP_I2C 2211 help 2212 If you say yes here you get support for the Nuvoton W83773G hardware 2213 monitoring chip. 2214 2215 This driver can also be built as a module. If so, the module 2216 will be called w83773g. 2217 2218config SENSORS_W83781D 2219 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2220 depends on I2C 2221 select HWMON_VID 2222 help 2223 If you say yes here you get support for the Winbond W8378x series 2224 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2225 Asus AS99127F. 2226 2227 This driver can also be built as a module. If so, the module 2228 will be called w83781d. 2229 2230config SENSORS_W83791D 2231 tristate "Winbond W83791D" 2232 depends on I2C 2233 select HWMON_VID 2234 help 2235 If you say yes here you get support for the Winbond W83791D chip. 2236 2237 This driver can also be built as a module. If so, the module 2238 will be called w83791d. 2239 2240config SENSORS_W83792D 2241 tristate "Winbond W83792D" 2242 depends on I2C 2243 help 2244 If you say yes here you get support for the Winbond W83792D chip. 2245 2246 This driver can also be built as a module. If so, the module 2247 will be called w83792d. 2248 2249config SENSORS_W83793 2250 tristate "Winbond W83793" 2251 depends on I2C 2252 select HWMON_VID 2253 help 2254 If you say yes here you get support for the Winbond W83793 2255 hardware monitoring chip, including support for the integrated 2256 watchdog. 2257 2258 This driver can also be built as a module. If so, the module 2259 will be called w83793. 2260 2261config SENSORS_W83795 2262 tristate "Winbond/Nuvoton W83795G/ADG" 2263 depends on I2C 2264 help 2265 If you say yes here you get support for the Winbond W83795G and 2266 W83795ADG hardware monitoring chip, including manual fan speed 2267 control. 2268 2269 This driver can also be built as a module. If so, the module 2270 will be called w83795. 2271 2272config SENSORS_W83795_FANCTRL 2273 bool "Include automatic fan control support" 2274 depends on SENSORS_W83795 2275 help 2276 If you say yes here, support for automatic fan speed control 2277 will be included in the driver. 2278 2279 Please also note that this option will create sysfs attribute 2280 files which may change in the future, so you shouldn't rely 2281 on them being stable. 2282 2283config SENSORS_W83L785TS 2284 tristate "Winbond W83L785TS-S" 2285 depends on I2C 2286 help 2287 If you say yes here you get support for the Winbond W83L785TS-S 2288 sensor chip, which is used on the Asus A7N8X, among other 2289 motherboards. 2290 2291 This driver can also be built as a module. If so, the module 2292 will be called w83l785ts. 2293 2294config SENSORS_W83L786NG 2295 tristate "Winbond W83L786NG, W83L786NR" 2296 depends on I2C 2297 help 2298 If you say yes here you get support for the Winbond W83L786NG 2299 and W83L786NR sensor chips. 2300 2301 This driver can also be built as a module. If so, the module 2302 will be called w83l786ng. 2303 2304config SENSORS_W83627HF 2305 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2306 depends on !PPC 2307 select HWMON_VID 2308 help 2309 If you say yes here you get support for the Winbond W836X7 series 2310 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2311 W83697HF. 2312 2313 This driver can also be built as a module. If so, the module 2314 will be called w83627hf. 2315 2316config SENSORS_W83627EHF 2317 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2318 depends on !PPC 2319 select HWMON_VID 2320 help 2321 If you say yes here you get support for the hardware 2322 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2323 2324 This driver also supports the W83627EHG, which is the lead-free 2325 version of the W83627EHF, and the W83627DHG, which is a similar 2326 chip suited for specific Intel processors that use PECI such as 2327 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2328 version of the W83627DHG (as far as hardware monitoring goes.) 2329 2330 This driver also supports Nuvoton W83667HG and W83667HG-B. 2331 2332 This driver can also be built as a module. If so, the module 2333 will be called w83627ehf. 2334 2335config SENSORS_WM831X 2336 tristate "WM831x PMICs" 2337 depends on MFD_WM831X 2338 help 2339 If you say yes here you get support for the hardware 2340 monitoring functionality of the Wolfson Microelectronics 2341 WM831x series of PMICs. 2342 2343 This driver can also be built as a module. If so, the module 2344 will be called wm831x-hwmon. 2345 2346config SENSORS_WM8350 2347 tristate "Wolfson Microelectronics WM835x" 2348 depends on MFD_WM8350 2349 help 2350 If you say yes here you get support for the hardware 2351 monitoring features of the WM835x series of PMICs. 2352 2353 This driver can also be built as a module. If so, the module 2354 will be called wm8350-hwmon. 2355 2356config SENSORS_ULTRA45 2357 tristate "Sun Ultra45 PIC16F747" 2358 depends on SPARC64 2359 help 2360 This driver provides support for the Ultra45 workstation environmental 2361 sensors. 2362 2363config SENSORS_XGENE 2364 tristate "APM X-Gene SoC hardware monitoring driver" 2365 depends on XGENE_SLIMPRO_MBOX || PCC 2366 help 2367 If you say yes here you get support for the temperature 2368 and power sensors for APM X-Gene SoC. 2369 2370config SENSORS_INTEL_M10_BMC_HWMON 2371 tristate "Intel MAX10 BMC Hardware Monitoring" 2372 depends on MFD_INTEL_M10_BMC_CORE 2373 help 2374 This driver provides support for the hardware monitoring functionality 2375 on Intel MAX10 BMC chip. 2376 2377 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2378 sensors monitor various telemetry data of different components on the 2379 card, e.g. board temperature, FPGA core temperature/voltage/current. 2380 2381if ACPI 2382 2383comment "ACPI drivers" 2384 2385config SENSORS_ACPI_POWER 2386 tristate "ACPI 4.0 power meter" 2387 help 2388 This driver exposes ACPI 4.0 power meters as hardware monitoring 2389 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2390 and a power meter. 2391 2392 To compile this driver as a module, choose M here: 2393 the module will be called acpi_power_meter. 2394 2395config SENSORS_ATK0110 2396 tristate "ASUS ATK0110" 2397 depends on X86 2398 help 2399 If you say yes here you get support for the ACPI hardware 2400 monitoring interface found in many ASUS motherboards. This 2401 driver will provide readings of fans, voltages and temperatures 2402 through the system firmware. 2403 2404 This driver can also be built as a module. If so, the module 2405 will be called asus_atk0110. 2406 2407config SENSORS_ASUS_WMI 2408 tristate "ASUS WMI X370/X470/B450/X399" 2409 depends on ACPI_WMI 2410 help 2411 If you say yes here you get support for the ACPI hardware monitoring 2412 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2413 will provide readings of fans, voltages and temperatures through the system 2414 firmware. 2415 2416 This driver can also be built as a module. If so, the module 2417 will be called asus_wmi_sensors. 2418 2419config SENSORS_ASUS_EC 2420 tristate "ASUS EC Sensors" 2421 depends on X86 2422 help 2423 If you say yes here you get support for the ACPI embedded controller 2424 hardware monitoring interface found in ASUS motherboards. The driver 2425 currently supports B550/X570 boards, although other ASUS boards might 2426 provide this monitoring interface as well. 2427 2428 This driver can also be built as a module. If so, the module 2429 will be called asus_ec_sensors. 2430 2431config SENSORS_HP_WMI 2432 tristate "HP WMI Sensors" 2433 depends on ACPI_WMI 2434 help 2435 If you say yes here you get support for the ACPI hardware monitoring 2436 interface found in HP (and some HP Compaq) business-class computers. 2437 Available sensors vary between systems. Temperature and fan speed 2438 sensors are the most common. 2439 2440 This driver can also be built as a module. If so, the module 2441 will be called hp_wmi_sensors. 2442 2443endif # ACPI 2444 2445endif # HWMON 2446