1# SPDX-License-Identifier: GPL-2.0-only
2config HOSTAP
3	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
4	select WIRELESS_EXT
5	select WEXT_SPY
6	select WEXT_PRIV
7	select CRYPTO
8	select CRYPTO_MICHAEL_MIC
9	select CRC32
10	select LIB80211
11	select LIB80211_CRYPT_WEP
12	select LIB80211_CRYPT_TKIP
13	select LIB80211_CRYPT_CCMP
14	help
15	Shared driver code for IEEE 802.11b wireless cards based on
16	Intersil Prism2/2.5/3 chipset. This driver supports so called
17	Host AP mode that allows the card to act as an IEEE 802.11
18	access point.
19
20	See <http://hostap.epitest.fi/> for more information about the
21	Host AP driver configuration and tools. This site includes
22	information and tools (hostapd and wpa_supplicant) for WPA/WPA2
23	support.
24
25	This option includes the base Host AP driver code that is shared by
26	different hardware models. You will also need to enable support for
27	PLX/PCI/CS version of the driver to actually use the driver.
28
29	The driver can be compiled as a module and it will be called
30	hostap.
31
32config HOSTAP_FIRMWARE
33	bool "Support downloading firmware images with Host AP driver"
34	depends on HOSTAP
35	help
36	Configure Host AP driver to include support for firmware image
37	download. This option by itself only enables downloading to the
38	volatile memory, i.e. the card RAM. This option is required to
39	support cards that don't have firmware in flash, such as D-Link
40	DWL-520 rev E and D-Link DWL-650 rev P.
41
42	Firmware image downloading needs a user space tool, prism2_srec.
43	It is available from http://hostap.epitest.fi/.
44
45config HOSTAP_FIRMWARE_NVRAM
46	bool "Support for non-volatile firmware download"
47	depends on HOSTAP_FIRMWARE
48	help
49	Allow Host AP driver to write firmware images to the non-volatile
50	card memory, i.e. flash memory that survives power cycling.
51	Enable this option if you want to be able to change card firmware
52	permanently.
53
54	Firmware image downloading needs a user space tool, prism2_srec.
55	It is available from http://hostap.epitest.fi/.
56
57config HOSTAP_PLX
58	tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
59	depends on PCI && HOSTAP && HAS_IOPORT
60	help
61	Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
62	PCI adaptors.
63
64	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
65	driver and its help text includes more information about the Host AP
66	driver.
67
68	The driver can be compiled as a module and will be named
69	hostap_plx.
70
71config HOSTAP_PCI
72	tristate "Host AP driver for Prism2.5 PCI adaptors"
73	depends on PCI && HOSTAP
74	help
75	Host AP driver's version for Prism2.5 PCI adaptors.
76
77	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
78	driver and its help text includes more information about the Host AP
79	driver.
80
81	The driver can be compiled as a module and will be named
82	hostap_pci.
83
84config HOSTAP_CS
85	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
86	depends on PCMCIA && HOSTAP
87	help
88	Host AP driver's version for Prism2/2.5/3 PC Cards.
89
90	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
91	driver and its help text includes more information about the Host AP
92	driver.
93
94	The driver can be compiled as a module and will be named
95	hostap_cs.
96