xref: /openbmc/linux/drivers/net/ethernet/amd/Kconfig (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 # SPDX-License-Identifier: GPL-2.0-only
2 #
3 # AMD network device configuration
4 #
5 
6 config NET_VENDOR_AMD
7 	bool "AMD devices"
8 	default y
9 	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10 		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11 		   ISA || EISA || PCMCIA || ARM64
12 	help
13 	  If you have a network (Ethernet) chipset belonging to this class,
14 	  say Y.
15 
16 	  Note that the answer to this question does not directly affect
17 	  the kernel: saying N will just cause the configurator to skip all
18 	  the questions regarding AMD chipsets. If you say Y, you will be asked
19 	  for your specific chipset/driver in the following questions.
20 
21 if NET_VENDOR_AMD
22 
23 config A2065
24 	tristate "A2065 support"
25 	depends on ZORRO
26 	select CRC32
27 	help
28 	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29 	  say N.
30 
31 	  To compile this driver as a module, choose M here: the module
32 	  will be called a2065.
33 
34 config AMD8111_ETH
35 	tristate "AMD 8111 (new PCI LANCE) support"
36 	depends on PCI
37 	select CRC32
38 	select MII
39 	help
40 	  If you have an AMD 8111-based PCI LANCE ethernet card,
41 	  answer Y here.
42 
43 	  To compile this driver as a module, choose M here. The module
44 	  will be called amd8111e.
45 
46 config LANCE
47 	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48 	depends on ISA && ISA_DMA_API && !ARM && !PPC32
49 	select NETDEV_LEGACY_INIT
50 	help
51 	  If you have a network (Ethernet) card of this type, say Y here.
52 	  Some LinkSys cards are of this type.
53 
54 	  To compile this driver as a module, choose M here: the module
55 	  will be called lance.  This is recommended.
56 
57 config PCNET32
58 	tristate "AMD PCnet32 PCI support"
59 	depends on PCI
60 	select CRC32
61 	select MII
62 	help
63 	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
64 	  answer Y here.
65 
66 	  To compile this driver as a module, choose M here. The module
67 	  will be called pcnet32.
68 
69 config ARIADNE
70 	tristate "Ariadne support"
71 	depends on ZORRO
72 	help
73 	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
74 	  Otherwise, say N.
75 
76 	  To compile this driver as a module, choose M here: the module
77 	  will be called ariadne.
78 
79 config ATARILANCE
80 	tristate "Atari LANCE support"
81 	depends on ATARI
82 	help
83 	  Say Y to include support for several Atari Ethernet adapters based
84 	  on the AMD LANCE chipset: RieblCard (with or without battery), or
85 	  PAMCard VME (also the version by Rhotron, with different addresses).
86 
87 config DECLANCE
88 	tristate "DEC LANCE ethernet controller support"
89 	depends on MACH_DECSTATION
90 	select CRC32
91 	help
92 	  This driver is for the series of Ethernet controllers produced by
93 	  DEC (now Compaq) based on the AMD LANCE chipset, including the
94 	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
95 
96 config HPLANCE
97 	tristate "HP on-board LANCE support"
98 	depends on DIO
99 	select CRC32
100 	help
101 	  If you want to use the builtin "LANCE" Ethernet controller on an
102 	  HP300 machine, say Y here.
103 
104 config MIPS_AU1X00_ENET
105 	tristate "MIPS AU1000 Ethernet support"
106 	depends on MIPS_ALCHEMY
107 	select PHYLIB
108 	select CRC32
109 	help
110 	  If you have an Alchemy Semi AU1X00 based system
111 	  say Y.  Otherwise, say N.
112 
113 config MVME147_NET
114 	tristate "MVME147 (LANCE) Ethernet support"
115 	depends on MVME147
116 	select CRC32
117 	help
118 	  Support for the on-board Ethernet interface on the Motorola MVME147
119 	  single-board computer.  Say Y here to include the
120 	  driver for this chip in your kernel.
121 	  To compile this driver as a module, choose M here.
122 
123 config PCMCIA_NMCLAN
124 	tristate "New Media PCMCIA support"
125 	depends on PCMCIA
126 	help
127 	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
128 	  PCMCIA (PC-card) Ethernet card to your computer.
129 
130 	  To compile this driver as a module, choose M here: the module will be
131 	  called nmclan_cs.  If unsure, say N.
132 
133 config SUN3LANCE
134 	tristate "Sun3/Sun3x on-board LANCE support"
135 	depends on (SUN3 || SUN3X)
136 	help
137 	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
138 	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
139 	  here to compile in the Linux driver for this and enable Ethernet.
140 	  General Linux information on the Sun 3 and 3x series (now
141 	  discontinued) is at
142 	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
143 
144 	  If you're not building a kernel for a Sun 3, say N.
145 
146 config SUNLANCE
147 	tristate "Sun LANCE support"
148 	depends on SBUS
149 	select CRC32
150 	help
151 	  This driver supports the "le" interface present on all 32-bit Sparc
152 	  systems, on some older Ultra systems and as an Sbus option.  These
153 	  cards are based on the AMD LANCE chipset, which is better known
154 	  via the NE2100 cards.
155 
156 	  To compile this driver as a module, choose M here: the module
157 	  will be called sunlance.
158 
159 config AMD_XGBE
160 	tristate "AMD 10GbE Ethernet driver"
161 	depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
162 	depends on X86 || ARM64 || COMPILE_TEST
163 	depends on PTP_1588_CLOCK_OPTIONAL
164 	select BITREVERSE
165 	select CRC32
166 	select PHYLIB
167 	select AMD_XGBE_HAVE_ECC if X86
168 	help
169 	  This driver supports the AMD 10GbE Ethernet device found on an
170 	  AMD SoC.
171 
172 	  To compile this driver as a module, choose M here: the module
173 	  will be called amd-xgbe.
174 
175 config AMD_XGBE_DCB
176 	bool "Data Center Bridging (DCB) support"
177 	default n
178 	depends on AMD_XGBE && DCB
179 	help
180 	  Say Y here to enable Data Center Bridging (DCB) support in the
181 	  driver.
182 
183 	  If unsure, say N.
184 
185 config AMD_XGBE_HAVE_ECC
186 	bool
187 	default n
188 
189 config PDS_CORE
190 	tristate "AMD/Pensando Data Systems Core Device Support"
191 	depends on 64BIT && PCI
192 	select AUXILIARY_BUS
193 	select NET_DEVLINK
194 	help
195 	  This enables the support for the AMD/Pensando Core device family of
196 	  adapters.  More specific information on this driver can be
197 	  found in
198 	  <file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.
199 
200 	  To compile this driver as a module, choose M here. The module
201 	  will be called pds_core.
202 
203 endif # NET_VENDOR_AMD
204