1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Broadcom device configuration 4# 5 6config NET_VENDOR_BROADCOM 7 bool "Broadcom devices" 8 default y 9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ 10 SIBYTE_SB1xxx_SOC 11 help 12 If you have a network (Ethernet) chipset belonging to this class, 13 say Y. 14 15 Note that the answer to this question does not directly affect 16 the kernel: saying N will just cause the configurator to skip all 17 the questions regarding Broadcom chipsets. If you say Y, you will 18 be asked for your specific chipset/driver in the following questions. 19 20if NET_VENDOR_BROADCOM 21 22config B44 23 tristate "Broadcom 440x/47xx ethernet support" 24 depends on SSB_POSSIBLE && HAS_DMA 25 select SSB 26 select MII 27 select PHYLIB 28 help 29 If you have a network (Ethernet) controller of this type, say Y 30 or M here. 31 32 To compile this driver as a module, choose M here. The module 33 will be called b44. 34 35# Auto-select SSB PCI-HOST support, if possible 36config B44_PCI_AUTOSELECT 37 bool 38 depends on B44 && SSB_PCIHOST_POSSIBLE 39 select SSB_PCIHOST 40 default y 41 42# Auto-select SSB PCICORE driver, if possible 43config B44_PCICORE_AUTOSELECT 44 bool 45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE 46 select SSB_DRIVER_PCICORE 47 default y 48 49config B44_PCI 50 bool 51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT 52 default y 53 54config BCM4908_ENET 55 tristate "Broadcom BCM4908 internal mac support" 56 depends on ARCH_BCMBCA || COMPILE_TEST 57 default y if ARCH_BCMBCA 58 help 59 This driver supports Ethernet controller integrated into Broadcom 60 BCM4908 family SoCs. 61 62config BCM63XX_ENET 63 tristate "Broadcom 63xx internal mac support" 64 depends on BCM63XX 65 select MII 66 select PHYLIB 67 help 68 This driver supports the ethernet MACs in the Broadcom 63xx 69 MIPS chipset family (BCM63XX). 70 71config BCMGENET 72 tristate "Broadcom GENET internal MAC support" 73 depends on HAS_IOMEM 74 depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835 75 select MII 76 select PHYLIB 77 select FIXED_PHY 78 select BCM7XXX_PHY 79 select MDIO_BCM_UNIMAC 80 select DIMLIB 81 select BROADCOM_PHY if ARCH_BCM2835 82 help 83 This driver supports the built-in Ethernet MACs found in the 84 Broadcom BCM7xxx Set Top Box family chipset. 85 86config BNX2 87 tristate "QLogic bnx2 support" 88 depends on PCI 89 select CRC32 90 select FW_LOADER 91 help 92 This driver supports QLogic bnx2 gigabit Ethernet cards. 93 94 To compile this driver as a module, choose M here: the module 95 will be called bnx2. This is recommended. 96 97config CNIC 98 tristate "QLogic CNIC support" 99 depends on PCI && (IPV6 || IPV6=n) 100 depends on MMU 101 select BNX2 102 select UIO 103 help 104 This driver supports offload features of QLogic bnx2 gigabit 105 Ethernet cards. 106 107 To compile this driver as a module, choose M here: the module 108 will be called cnic. This is recommended. 109 110config SB1250_MAC 111 tristate "SB1250 Gigabit Ethernet support" 112 depends on SIBYTE_SB1xxx_SOC 113 select PHYLIB 114 help 115 This driver supports Gigabit Ethernet interfaces based on the 116 Broadcom SiByte family of System-On-a-Chip parts. They include 117 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 118 and BCM1480 chips. 119 120 To compile this driver as a module, choose M here: the module 121 will be called sb1250-mac. 122 123config TIGON3 124 tristate "Broadcom Tigon3 support" 125 depends on PCI 126 depends on PTP_1588_CLOCK_OPTIONAL 127 select PHYLIB 128 help 129 This driver supports Broadcom Tigon3 based gigabit Ethernet cards. 130 131 To compile this driver as a module, choose M here: the module 132 will be called tg3. This is recommended. 133 134config TIGON3_HWMON 135 bool "Broadcom Tigon3 HWMON support" 136 default y 137 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) 138 help 139 Say Y if you want to expose the thermal sensor on Tigon3 devices. 140 141config BNX2X 142 tristate "Broadcom NetXtremeII 10Gb support" 143 depends on PCI 144 depends on PTP_1588_CLOCK_OPTIONAL 145 select FW_LOADER 146 select ZLIB_INFLATE 147 select LIBCRC32C 148 select MDIO 149 help 150 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. 151 To compile this driver as a module, choose M here: the module 152 will be called bnx2x. This is recommended. 153 154config BNX2X_SRIOV 155 bool "Broadcom 578xx and 57712 SR-IOV support" 156 depends on BNX2X && PCI_IOV 157 default y 158 help 159 This configuration parameter enables Single Root Input Output 160 Virtualization support in the 578xx and 57712 products. This 161 allows for virtual function acceleration in virtual environments. 162 163config BGMAC 164 tristate 165 help 166 This enables the integrated ethernet controller support for many 167 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver 168 needs to be enabled to select this. 169 170config BGMAC_BCMA 171 tristate "Broadcom iProc GBit BCMA support" 172 depends on BCMA && BCMA_HOST_SOC 173 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST 174 select BGMAC 175 select PHYLIB 176 select FIXED_PHY 177 help 178 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. 179 They can be found on BCM47xx SoCs and provide gigabit ethernet. 180 In case of using this driver on BCM4706 it's also requires to enable 181 BCMA_DRIVER_GMAC_CMN to make it work. 182 183config BGMAC_PLATFORM 184 tristate "Broadcom iProc GBit platform support" 185 depends on ARCH_BCM_IPROC || COMPILE_TEST 186 select BGMAC 187 select PHYLIB 188 select FIXED_PHY 189 default ARCH_BCM_IPROC 190 help 191 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet 192 controller through the generic platform interface 193 194config SYSTEMPORT 195 tristate "Broadcom SYSTEMPORT internal MAC support" 196 depends on HAS_IOMEM 197 depends on NET_DSA || !NET_DSA 198 select MII 199 select PHYLIB 200 select FIXED_PHY 201 select DIMLIB 202 help 203 This driver supports the built-in Ethernet MACs found in the 204 Broadcom BCM7xxx Set Top Box family chipset using an internal 205 Ethernet switch. 206 207config BNXT 208 tristate "Broadcom NetXtreme-C/E support" 209 depends on PCI 210 depends on PTP_1588_CLOCK_OPTIONAL 211 select FW_LOADER 212 select LIBCRC32C 213 select NET_DEVLINK 214 select PAGE_POOL 215 select DIMLIB 216 select AUXILIARY_BUS 217 help 218 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit 219 Ethernet cards. To compile this driver as a module, choose M here: 220 the module will be called bnxt_en. This is recommended. 221 222config BNXT_SRIOV 223 bool "Broadcom NetXtreme-C/E SR-IOV support" 224 depends on BNXT && PCI_IOV 225 default y 226 help 227 This configuration parameter enables Single Root Input Output 228 Virtualization support in the NetXtreme-C/E products. This 229 allows for virtual function acceleration in virtual environments. 230 231config BNXT_FLOWER_OFFLOAD 232 bool "TC Flower offload support for NetXtreme-C/E" 233 depends on BNXT 234 default y 235 help 236 This configuration parameter enables TC Flower packet classifier 237 offload for eswitch. This option enables SR-IOV switchdev eswitch 238 offload. 239 240config BNXT_DCB 241 bool "Data Center Bridging (DCB) Support" 242 default n 243 depends on BNXT && DCB 244 help 245 Say Y here if you want to use Data Center Bridging (DCB) in the 246 driver. 247 248 If unsure, say N. 249 250config BNXT_HWMON 251 bool "Broadcom NetXtreme-C/E HWMON support" 252 default y 253 depends on BNXT && HWMON && !(BNXT=y && HWMON=m) 254 help 255 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E 256 devices, via the hwmon sysfs interface. 257 258config BCMASP 259 tristate "Broadcom ASP 2.0 Ethernet support" 260 depends on ARCH_BRCMSTB || COMPILE_TEST 261 default ARCH_BRCMSTB 262 depends on OF 263 select MII 264 select PHYLIB 265 select MDIO_BCM_UNIMAC 266 help 267 This configuration enables the Broadcom ASP 2.0 Ethernet controller 268 driver which is present in Broadcom STB SoCs such as 72165. 269 270endif # NET_VENDOR_BROADCOM 271