1 /*
2  * Copyright (c) 201 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #ifndef _LINUX_BRCMFMAC_PLATFORM_H
18 #define _LINUX_BRCMFMAC_PLATFORM_H
19 
20 
21 #define BRCMFMAC_PDATA_NAME		"brcmfmac"
22 
23 #define BRCMFMAC_COUNTRY_BUF_SZ		4
24 
25 
26 /*
27  * Platform specific driver functions and data. Through the platform specific
28  * device data functions and data can be provided to help the brcmfmac driver to
29  * operate with the device in combination with the used platform.
30  */
31 
32 
33 /**
34  * Note: the brcmfmac can be loaded as module or be statically built-in into
35  * the kernel. If built-in then do note that it uses module_init (and
36  * module_exit) routines which equal device_initcall. So if you intend to
37  * create a module with the platform specific data for the brcmfmac and have
38  * it built-in to the kernel then use a higher initcall then device_initcall
39  * (see init.h). If this is not done then brcmfmac will load without problems
40  * but will not pickup the platform data.
41  *
42  * When the driver does not "detect" platform driver data then it will continue
43  * without reporting anything and just assume there is no data needed. Which is
44  * probably true for most platforms.
45  */
46 
47 /**
48  * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are
49  *			 supported.
50  */
51 enum brcmf_bus_type {
52 	BRCMF_BUSTYPE_SDIO,
53 	BRCMF_BUSTYPE_USB,
54 	BRCMF_BUSTYPE_PCIE
55 };
56 
57 
58 /**
59  * struct brcmfmac_sdio_pd - SDIO Device specific platform data.
60  *
61  * @txglomsz:		SDIO txglom size. Use 0 if default of driver is to be
62  *			used.
63  * @drive_strength:	is the preferred drive_strength to be used for the SDIO
64  *			pins. If 0 then a default value will be used. This is
65  *			the target drive strength, the exact drive strength
66  *			which will be used depends on the capabilities of the
67  *			device.
68  * @oob_irq_supported:	does the board have support for OOB interrupts. SDIO
69  *			in-band interrupts are relatively slow and for having
70  *			less overhead on interrupt processing an out of band
71  *			interrupt can be used. If the HW supports this then
72  *			enable this by setting this field to true and configure
73  *			the oob related fields.
74  * @oob_irq_nr,
75  * @oob_irq_flags:	the OOB interrupt information. The values are used for
76  *			registering the irq using request_irq function.
77  * @broken_sg_support:	flag for broken sg list support of SDIO host controller.
78  *			Set this to true if the SDIO host controller has higher
79  *			align requirement than 32 bytes for each scatterlist
80  *			item.
81  * @sd_head_align:	alignment requirement for start of data buffer.
82  * @sd_sgentry_align:	length alignment requirement for each sg entry.
83  * @reset:		This function can get called if the device communication
84  *			broke down. This functionality is particularly useful in
85  *			case of SDIO type devices. It is possible to reset a
86  *			dongle via sdio data interface, but it requires that
87  *			this is fully functional. This function is chip/module
88  *			specific and this function should return only after the
89  *			complete reset has completed.
90  */
91 struct brcmfmac_sdio_pd {
92 	int		txglomsz;
93 	unsigned int	drive_strength;
94 	bool		oob_irq_supported;
95 	unsigned int	oob_irq_nr;
96 	unsigned long	oob_irq_flags;
97 	bool		broken_sg_support;
98 	unsigned short	sd_head_align;
99 	unsigned short	sd_sgentry_align;
100 	void		(*reset)(void);
101 };
102 
103 /**
104  * struct brcmfmac_pd_cc_entry - Struct for translating user space country code
105  *				 (iso3166) to firmware country code and
106  *				 revision.
107  *
108  * @iso3166:	iso3166 alpha 2 country code string.
109  * @cc:		firmware country code string.
110  * @rev:	firmware country code revision.
111  */
112 struct brcmfmac_pd_cc_entry {
113 	char	iso3166[BRCMFMAC_COUNTRY_BUF_SZ];
114 	char	cc[BRCMFMAC_COUNTRY_BUF_SZ];
115 	s32	rev;
116 };
117 
118 /**
119  * struct brcmfmac_pd_cc - Struct for translating country codes as set by user
120  *			   space to a country code and rev which can be used by
121  *			   firmware.
122  *
123  * @table_size:	number of entries in table (> 0)
124  * @table:	array of 1 or more elements with translation information.
125  */
126 struct brcmfmac_pd_cc {
127 	int				table_size;
128 	struct brcmfmac_pd_cc_entry	table[];
129 };
130 
131 /**
132  * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type)
133  *			       is the unique identifier of the device.
134  *
135  * @id:			ID of the device for which this data is. In case of SDIO
136  *			or PCIE this is the chipid as identified by chip.c In
137  *			case of USB this is the chipid as identified by the
138  *			device query.
139  * @rev:		chip revision, see id.
140  * @bus_type:		The type of bus. Some chipid/rev exist for different bus
141  *			types. Each bus type has its own set of settings.
142  * @feature_disable:	Bitmask of features to disable (override), See feature.c
143  *			in brcmfmac for details.
144  * @country_codes:	If available, pointer to struct for translating country
145  *			codes.
146  * @bus:		Bus specific (union) device settings. Currently only
147  *			SDIO.
148  */
149 struct brcmfmac_pd_device {
150 	unsigned int		id;
151 	unsigned int		rev;
152 	enum brcmf_bus_type	bus_type;
153 	unsigned int		feature_disable;
154 	struct brcmfmac_pd_cc	*country_codes;
155 	union {
156 		struct brcmfmac_sdio_pd sdio;
157 	} bus;
158 };
159 
160 /**
161  * struct brcmfmac_platform_data - BRCMFMAC specific platform data.
162  *
163  * @power_on:	This function is called by the brcmfmac driver when the module
164  *		gets loaded. This can be particularly useful for low power
165  *		devices. The platform spcific routine may for example decide to
166  *		power up the complete device. If there is no use-case for this
167  *		function then provide NULL.
168  * @power_off:	This function is called by the brcmfmac when the module gets
169  *		unloaded. At this point the devices can be powered down or
170  *		otherwise be reset. So if an actual power_off is not supported
171  *		but reset is supported by the devices then reset the devices
172  *		when this function gets called. This can be particularly useful
173  *		for low power devices. If there is no use-case for this
174  *		function then provide NULL.
175  */
176 struct brcmfmac_platform_data {
177 	void	(*power_on)(void);
178 	void	(*power_off)(void);
179 	char	*fw_alternative_path;
180 	int	device_count;
181 	struct brcmfmac_pd_device devices[];
182 };
183 
184 
185 #endif /* _LINUX_BRCMFMAC_PLATFORM_H */
186