xref: /openbmc/linux/include/linux/mfd/rohm-bd957x.h (revision 42fc191d)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /* Copyright (C) 2021 ROHM Semiconductors */
3 
4 #ifndef __LINUX_MFD_BD957X_H__
5 #define __LINUX_MFD_BD957X_H__
6 
7 enum {
8 	BD957X_VD50,
9 	BD957X_VD18,
10 	BD957X_VDDDR,
11 	BD957X_VD10,
12 	BD957X_VOUTL1,
13 	BD957X_VOUTS1,
14 };
15 
16 /*
17  * The BD9576 has own IRQ 'blocks' for:
18  *  - I2C/thermal,
19  *  - Over voltage protection
20  *  - Short-circuit protection
21  *  - Over current protection
22  *  - Over voltage detection
23  *  - Under voltage detection
24  *  - Under voltage protection
25  *  - 'system interrupt'.
26  *
27  * Each of the blocks have a status register giving more accurate IRQ source
28  * information - for example which of the regulators have over-voltage.
29  *
30  * On top of this, there is "main IRQ" status register where each bit indicates
31  * which of sub-blocks have active IRQs. Fine. That would fit regmap-irq main
32  * status handling. Except that:
33  *  - Only some sub-IRQs can be masked.
34  *  - The IRQ informs us about fault-condition, not when fault state changes.
35  *    The IRQ line it is kept asserted until the detected condition is acked
36  *    AND cleared in HW. This is annoying for IRQs like the one informing high
37  *    temperature because if IRQ is not disabled it keeps the CPU in IRQ
38  *    handling loop.
39  *
40  * For now we do just use the main-IRQ register as source for our IRQ
41  * information and bind the regmap-irq to this. We leave fine-grained sub-IRQ
42  * register handling to handlers in sub-devices. The regulator driver shall
43  * read which regulators are source for problem - or if the detected error is
44  * regulator temperature error. The sub-drivers do also handle masking of "sub-
45  * IRQs" if this is supported/needed.
46  *
47  * To overcome the problem with HW keeping IRQ asserted we do call
48  * disable_irq_nosync() from sub-device handler and add a delayed work to
49  * re-enable IRQ roughly 1 second later. This should keep our CPU out of
50  * busy-loop.
51  */
52 #define IRQS_SILENT_MS			1000
53 
54 enum {
55 	BD9576_INT_THERM,
56 	BD9576_INT_OVP,
57 	BD9576_INT_SCP,
58 	BD9576_INT_OCP,
59 	BD9576_INT_OVD,
60 	BD9576_INT_UVD,
61 	BD9576_INT_UVP,
62 	BD9576_INT_SYS,
63 };
64 
65 #define BD957X_REG_SMRB_ASSERT		0x15
66 #define BD957X_REG_PMIC_INTERNAL_STAT	0x20
67 #define BD957X_REG_INT_THERM_STAT	0x23
68 #define BD957X_REG_INT_THERM_MASK	0x24
69 #define BD957X_REG_INT_OVP_STAT		0x25
70 #define BD957X_REG_INT_SCP_STAT		0x26
71 #define BD957X_REG_INT_OCP_STAT		0x27
72 #define BD957X_REG_INT_OVD_STAT		0x28
73 #define BD957X_REG_INT_UVD_STAT		0x29
74 #define BD957X_REG_INT_UVP_STAT		0x2a
75 #define BD957X_REG_INT_SYS_STAT		0x2b
76 #define BD957X_REG_INT_SYS_MASK		0x2c
77 #define BD957X_REG_INT_MAIN_STAT	0x30
78 #define BD957X_REG_INT_MAIN_MASK	0x31
79 
80 #define UVD_IRQ_VALID_MASK		0x6F
81 #define OVD_IRQ_VALID_MASK		0x2F
82 
83 #define BD957X_MASK_INT_MAIN_THERM	BIT(0)
84 #define BD957X_MASK_INT_MAIN_OVP	BIT(1)
85 #define BD957X_MASK_INT_MAIN_SCP	BIT(2)
86 #define BD957X_MASK_INT_MAIN_OCP	BIT(3)
87 #define BD957X_MASK_INT_MAIN_OVD	BIT(4)
88 #define BD957X_MASK_INT_MAIN_UVD	BIT(5)
89 #define BD957X_MASK_INT_MAIN_UVP	BIT(6)
90 #define BD957X_MASK_INT_MAIN_SYS	BIT(7)
91 #define BD957X_MASK_INT_ALL		0xff
92 
93 #define BD957X_REG_WDT_CONF		0x16
94 
95 #define BD957X_REG_POW_TRIGGER1		0x41
96 #define BD957X_REG_POW_TRIGGER2		0x42
97 #define BD957X_REG_POW_TRIGGER3		0x43
98 #define BD957X_REG_POW_TRIGGER4		0x44
99 #define BD957X_REG_POW_TRIGGERL1	0x45
100 #define BD957X_REG_POW_TRIGGERS1	0x46
101 
102 #define BD957X_REGULATOR_EN_MASK	0xff
103 #define BD957X_REGULATOR_DIS_VAL	0xff
104 
105 #define BD957X_VSEL_REG_MASK		0xff
106 
107 #define BD957X_MASK_VOUT1_TUNE		0x87
108 #define BD957X_MASK_VOUT2_TUNE		0x87
109 #define BD957X_MASK_VOUT3_TUNE		0x1f
110 #define BD957X_MASK_VOUT4_TUNE		0x1f
111 #define BD957X_MASK_VOUTL1_TUNE		0x87
112 
113 #define BD957X_REG_VOUT1_TUNE		0x50
114 #define BD957X_REG_VOUT2_TUNE		0x53
115 #define BD957X_REG_VOUT3_TUNE		0x56
116 #define BD957X_REG_VOUT4_TUNE		0x59
117 #define BD957X_REG_VOUTL1_TUNE		0x5c
118 
119 #define BD9576_REG_VOUT1_OVD		0x51
120 #define BD9576_REG_VOUT1_UVD		0x52
121 #define BD9576_REG_VOUT2_OVD		0x54
122 #define BD9576_REG_VOUT2_UVD		0x55
123 #define BD9576_REG_VOUT3_OVD		0x57
124 #define BD9576_REG_VOUT3_UVD		0x58
125 #define BD9576_REG_VOUT4_OVD		0x5a
126 #define BD9576_REG_VOUT4_UVD		0x5b
127 #define BD9576_REG_VOUTL1_OVD		0x5d
128 #define BD9576_REG_VOUTL1_UVD		0x5e
129 
130 #define BD9576_MASK_XVD			0x7f
131 
132 #define BD9576_REG_VOUT1S_OCW		0x5f
133 #define BD9576_REG_VOUT1S_OCP		0x60
134 
135 #define BD9576_MASK_VOUT1S_OCW		0x3f
136 #define BD9576_MASK_VOUT1S_OCP		0x3f
137 
138 #define BD957X_MAX_REGISTER		0x61
139 
140 #endif
141