1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* atmdev.h - ATM device driver declarations and various related items */ 3 4 /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ 5 6 7 #ifndef _UAPILINUX_ATMDEV_H 8 #define _UAPILINUX_ATMDEV_H 9 10 11 #include <linux/atmapi.h> 12 #include <linux/atm.h> 13 #include <linux/atmioc.h> 14 15 16 #define ESI_LEN 6 17 18 #define ATM_OC3_PCR (155520000/270*260/8/53) 19 /* OC3 link rate: 155520000 bps 20 SONET overhead: /270*260 (9 section, 1 path) 21 bits per cell: /8/53 22 max cell rate: 353207.547 cells/sec */ 23 #define ATM_25_PCR ((25600000/8-8000)/54) 24 /* 25 Mbps ATM cell rate (59111) */ 25 #define ATM_OC12_PCR (622080000/1080*1040/8/53) 26 /* OC12 link rate: 622080000 bps 27 SONET overhead: /1080*1040 28 bits per cell: /8/53 29 max cell rate: 1412830.188 cells/sec */ 30 #define ATM_DS3_PCR (8000*12) 31 /* DS3: 12 cells in a 125 usec time slot */ 32 33 34 #define __AAL_STAT_ITEMS \ 35 __HANDLE_ITEM(tx); /* TX okay */ \ 36 __HANDLE_ITEM(tx_err); /* TX errors */ \ 37 __HANDLE_ITEM(rx); /* RX okay */ \ 38 __HANDLE_ITEM(rx_err); /* RX errors */ \ 39 __HANDLE_ITEM(rx_drop); /* RX out of memory */ 40 41 struct atm_aal_stats { 42 #define __HANDLE_ITEM(i) int i 43 __AAL_STAT_ITEMS 44 #undef __HANDLE_ITEM 45 }; 46 47 48 struct atm_dev_stats { 49 struct atm_aal_stats aal0; 50 struct atm_aal_stats aal34; 51 struct atm_aal_stats aal5; 52 } __ATM_API_ALIGN; 53 54 55 #define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) 56 /* get link rate */ 57 #define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) 58 /* get interface names (numbers) */ 59 #define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) 60 /* get interface type name */ 61 #define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) 62 /* get interface ESI */ 63 #define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) 64 /* get itf's local ATM addr. list */ 65 #define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) 66 /* reset itf's ATM address list */ 67 #define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) 68 /* add a local ATM address */ 69 #define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) 70 /* remove a local ATM address */ 71 #define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) 72 /* get connection identifier range */ 73 #define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) 74 /* set connection identifier range */ 75 #define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) 76 /* set interface ESI */ 77 #define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) 78 /* force interface ESI */ 79 #define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) 80 /* register a LECS address */ 81 #define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) 82 /* unregister a LECS address */ 83 #define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) 84 /* retrieve LECS address(es) */ 85 86 #define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) 87 /* get AAL layer statistics */ 88 #define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) 89 /* get AAL layer statistics and zero */ 90 #define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) 91 /* get loopback mode */ 92 #define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) 93 /* set loopback mode */ 94 #define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) 95 /* query supported loopback modes */ 96 #define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) 97 /* enable or disable single-copy */ 98 #define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) 99 /* set backend handler */ 100 #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) 101 /* use backend to make new if */ 102 #define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) 103 /* add party to p2mp call */ 104 #define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) 105 /* drop party from p2mp call */ 106 107 /* 108 * These are backend handkers that can be set via the ATM_SETBACKEND call 109 * above. In the future we may support dynamic loading of these - for now, 110 * they're just being used to share the ATMIOC_BACKEND ioctls 111 */ 112 #define ATM_BACKEND_RAW 0 113 #define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ 114 #define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ 115 116 /* for ATM_GETTYPE */ 117 #define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ 118 119 /* 120 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP 121 */ 122 123 /* Point of loopback CPU-->SAR-->PHY-->line--> ... */ 124 #define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ 125 #define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ 126 #define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ 127 /* RESERVED 4 loop back on PHY side ---' */ 128 #define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ 129 #define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ 130 131 /* Direction of loopback */ 132 #define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ 133 #define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ 134 135 #define __ATM_LM_XTLOC(n) ((n) & 0xff) 136 #define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) 137 138 #define ATM_LM_NONE 0 /* no loopback */ 139 140 #define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) 141 #define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) 142 #define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) 143 #define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) 144 145 #define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) 146 #define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) 147 #define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) 148 #define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) 149 150 /* 151 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that 152 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) 153 */ 154 155 156 struct atm_iobuf { 157 int length; 158 void __user *buffer; 159 }; 160 161 /* for ATM_GETCIRANGE / ATM_SETCIRANGE */ 162 163 #define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ 164 165 struct atm_cirange { 166 signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ 167 signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ 168 }; 169 170 /* for ATM_SETSC; actually taken from the ATM_VF number space */ 171 172 #define ATM_SC_RX 1024 /* enable RX single-copy */ 173 #define ATM_SC_TX 2048 /* enable TX single-copy */ 174 175 #define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out 176 anyway */ 177 178 /* MF: change_qos (Modify) flags */ 179 180 #define ATM_MF_IMMED 1 /* Block until change is effective */ 181 #define ATM_MF_INC_RSV 2 /* Change reservation on increase */ 182 #define ATM_MF_INC_SHP 4 /* Change shaping on increase */ 183 #define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ 184 #define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ 185 #define ATM_MF_BWD 32 /* Set the backward direction parameters */ 186 187 #define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ 188 ATM_MF_DEC_SHP | ATM_MF_BWD) 189 190 /* 191 * ATM_VS_* are used to express VC state in a human-friendly way. 192 */ 193 194 #define ATM_VS_IDLE 0 /* VC is not used */ 195 #define ATM_VS_CONNECTED 1 /* VC is connected */ 196 #define ATM_VS_CLOSING 2 /* VC is closing */ 197 #define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ 198 #define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ 199 #define ATM_VS_BOUND 5 /* VC is bound */ 200 201 #define ATM_VS2TXT_MAP \ 202 "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" 203 204 #define ATM_VF2TXT_MAP \ 205 "ADDR", "READY", "PARTIAL", "REGIS", \ 206 "RELEASED", "HASQOS", "LISTEN", "META", \ 207 "256", "512", "1024", "2048", \ 208 "SESSION", "HASSAP", "BOUND", "CLOSE" 209 210 211 212 #endif /* _UAPILINUX_ATMDEV_H */ 213