1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Aspeed 24XX/25XX I2C Controller.
4 *
5 * Copyright (C) 2012-2017 ASPEED Technology Inc.
6 * Copyright 2017 IBM Corporation
7 * Copyright 2017 Google, Inc.
8 */
9
10 #include <linux/clk.h>
11 #include <linux/completion.h>
12 #include <linux/err.h>
13 #include <linux/errno.h>
14 #include <linux/i2c.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/io.h>
18 #include <linux/irq.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/of_address.h>
22 #include <linux/of_irq.h>
23 #include <linux/of_platform.h>
24 #include <linux/platform_device.h>
25 #include <linux/reset.h>
26 #include <linux/slab.h>
27
28 /* I2C Register */
29 #define ASPEED_I2C_FUN_CTRL_REG 0x00
30 #define ASPEED_I2C_AC_TIMING_REG1 0x04
31 #define ASPEED_I2C_AC_TIMING_REG2 0x08
32 #define ASPEED_I2C_INTR_CTRL_REG 0x0c
33 #define ASPEED_I2C_INTR_STS_REG 0x10
34 #define ASPEED_I2C_CMD_REG 0x14
35 #define ASPEED_I2C_DEV_ADDR_REG 0x18
36 #define ASPEED_I2C_BYTE_BUF_REG 0x20
37
38 /* Global Register Definition */
39 /* 0x00 : I2C Interrupt Status Register */
40 /* 0x08 : I2C Interrupt Target Assignment */
41
42 /* Device Register Definition */
43 /* 0x00 : I2CD Function Control Register */
44 #define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15)
45 #define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8)
46 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7)
47 #define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6)
48 #define ASPEED_I2CD_SLAVE_EN BIT(1)
49 #define ASPEED_I2CD_MASTER_EN BIT(0)
50
51 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */
52 #define ASPEED_I2CD_TIME_TBUF_MASK GENMASK(31, 28)
53 #define ASPEED_I2CD_TIME_THDSTA_MASK GENMASK(27, 24)
54 #define ASPEED_I2CD_TIME_TACST_MASK GENMASK(23, 20)
55 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16
56 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16)
57 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12
58 #define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12)
59 #define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0)
60 #define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0)
61 /* 0x08 : I2CD Clock and AC Timing Control Register #2 */
62 #define ASPEED_NO_TIMEOUT_CTRL 0
63
64 /* 0x0c : I2CD Interrupt Control Register &
65 * 0x10 : I2CD Interrupt Status Register
66 *
67 * These share bit definitions, so use the same values for the enable &
68 * status bits.
69 */
70 #define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff
71 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
72 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
73 #define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
74 #define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6)
75 #define ASPEED_I2CD_INTR_ABNORMAL BIT(5)
76 #define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4)
77 #define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3)
78 #define ASPEED_I2CD_INTR_RX_DONE BIT(2)
79 #define ASPEED_I2CD_INTR_TX_NAK BIT(1)
80 #define ASPEED_I2CD_INTR_TX_ACK BIT(0)
81 #define ASPEED_I2CD_INTR_MASTER_ERRORS \
82 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
83 ASPEED_I2CD_INTR_SCL_TIMEOUT | \
84 ASPEED_I2CD_INTR_ABNORMAL | \
85 ASPEED_I2CD_INTR_ARBIT_LOSS)
86 #define ASPEED_I2CD_INTR_ALL \
87 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
88 ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \
89 ASPEED_I2CD_INTR_SCL_TIMEOUT | \
90 ASPEED_I2CD_INTR_ABNORMAL | \
91 ASPEED_I2CD_INTR_NORMAL_STOP | \
92 ASPEED_I2CD_INTR_ARBIT_LOSS | \
93 ASPEED_I2CD_INTR_RX_DONE | \
94 ASPEED_I2CD_INTR_TX_NAK | \
95 ASPEED_I2CD_INTR_TX_ACK)
96
97 /* 0x14 : I2CD Command/Status Register */
98 #define ASPEED_I2CD_SCL_LINE_STS BIT(18)
99 #define ASPEED_I2CD_SDA_LINE_STS BIT(17)
100 #define ASPEED_I2CD_BUS_BUSY_STS BIT(16)
101 #define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11)
102
103 /* Command Bit */
104 #define ASPEED_I2CD_M_STOP_CMD BIT(5)
105 #define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4)
106 #define ASPEED_I2CD_M_RX_CMD BIT(3)
107 #define ASPEED_I2CD_S_TX_CMD BIT(2)
108 #define ASPEED_I2CD_M_TX_CMD BIT(1)
109 #define ASPEED_I2CD_M_START_CMD BIT(0)
110 #define ASPEED_I2CD_MASTER_CMDS_MASK \
111 (ASPEED_I2CD_M_STOP_CMD | \
112 ASPEED_I2CD_M_S_RX_CMD_LAST | \
113 ASPEED_I2CD_M_RX_CMD | \
114 ASPEED_I2CD_M_TX_CMD | \
115 ASPEED_I2CD_M_START_CMD)
116
117 /* 0x18 : I2CD Slave Device Address Register */
118 #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
119
120 enum aspeed_i2c_master_state {
121 ASPEED_I2C_MASTER_INACTIVE,
122 ASPEED_I2C_MASTER_PENDING,
123 ASPEED_I2C_MASTER_START,
124 ASPEED_I2C_MASTER_TX_FIRST,
125 ASPEED_I2C_MASTER_TX,
126 ASPEED_I2C_MASTER_RX_FIRST,
127 ASPEED_I2C_MASTER_RX,
128 ASPEED_I2C_MASTER_STOP,
129 };
130
131 enum aspeed_i2c_slave_state {
132 ASPEED_I2C_SLAVE_INACTIVE,
133 ASPEED_I2C_SLAVE_START,
134 ASPEED_I2C_SLAVE_READ_REQUESTED,
135 ASPEED_I2C_SLAVE_READ_PROCESSED,
136 ASPEED_I2C_SLAVE_WRITE_REQUESTED,
137 ASPEED_I2C_SLAVE_WRITE_RECEIVED,
138 ASPEED_I2C_SLAVE_STOP,
139 };
140
141 struct aspeed_i2c_bus {
142 struct i2c_adapter adap;
143 struct device *dev;
144 void __iomem *base;
145 struct reset_control *rst;
146 /* Synchronizes I/O mem access to base. */
147 spinlock_t lock;
148 struct completion cmd_complete;
149 u32 (*get_clk_reg_val)(struct device *dev,
150 u32 divisor);
151 unsigned long parent_clk_frequency;
152 u32 bus_frequency;
153 /* Transaction state. */
154 enum aspeed_i2c_master_state master_state;
155 struct i2c_msg *msgs;
156 size_t buf_index;
157 size_t msgs_index;
158 size_t msgs_count;
159 bool send_stop;
160 int cmd_err;
161 /* Protected only by i2c_lock_bus */
162 int master_xfer_result;
163 /* Multi-master */
164 bool multi_master;
165 #if IS_ENABLED(CONFIG_I2C_SLAVE)
166 struct i2c_client *slave;
167 enum aspeed_i2c_slave_state slave_state;
168 #endif /* CONFIG_I2C_SLAVE */
169 };
170
171 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
172
173 /* precondition: bus.lock has been acquired. */
aspeed_i2c_do_stop(struct aspeed_i2c_bus * bus)174 static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
175 {
176 bus->master_state = ASPEED_I2C_MASTER_STOP;
177 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
178 }
179
aspeed_i2c_recover_bus(struct aspeed_i2c_bus * bus)180 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
181 {
182 unsigned long time_left, flags;
183 int ret = 0;
184 u32 command;
185
186 spin_lock_irqsave(&bus->lock, flags);
187 command = readl(bus->base + ASPEED_I2C_CMD_REG);
188
189 if (command & ASPEED_I2CD_SDA_LINE_STS) {
190 /* Bus is idle: no recovery needed. */
191 if (command & ASPEED_I2CD_SCL_LINE_STS)
192 goto out;
193 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
194 command);
195
196 reinit_completion(&bus->cmd_complete);
197 aspeed_i2c_do_stop(bus);
198 spin_unlock_irqrestore(&bus->lock, flags);
199
200 time_left = wait_for_completion_timeout(
201 &bus->cmd_complete, bus->adap.timeout);
202
203 spin_lock_irqsave(&bus->lock, flags);
204 if (time_left == 0)
205 goto reset_out;
206 else if (bus->cmd_err)
207 goto reset_out;
208 /* Recovery failed. */
209 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
210 ASPEED_I2CD_SCL_LINE_STS))
211 goto reset_out;
212 /* Bus error. */
213 } else {
214 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
215 command);
216
217 reinit_completion(&bus->cmd_complete);
218 /* Writes 1 to 8 SCL clock cycles until SDA is released. */
219 writel(ASPEED_I2CD_BUS_RECOVER_CMD,
220 bus->base + ASPEED_I2C_CMD_REG);
221 spin_unlock_irqrestore(&bus->lock, flags);
222
223 time_left = wait_for_completion_timeout(
224 &bus->cmd_complete, bus->adap.timeout);
225
226 spin_lock_irqsave(&bus->lock, flags);
227 if (time_left == 0)
228 goto reset_out;
229 else if (bus->cmd_err)
230 goto reset_out;
231 /* Recovery failed. */
232 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
233 ASPEED_I2CD_SDA_LINE_STS))
234 goto reset_out;
235 }
236
237 out:
238 spin_unlock_irqrestore(&bus->lock, flags);
239
240 return ret;
241
242 reset_out:
243 spin_unlock_irqrestore(&bus->lock, flags);
244
245 return aspeed_i2c_reset(bus);
246 }
247
248 #if IS_ENABLED(CONFIG_I2C_SLAVE)
aspeed_i2c_slave_irq(struct aspeed_i2c_bus * bus,u32 irq_status)249 static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
250 {
251 u32 command, irq_handled = 0;
252 struct i2c_client *slave = bus->slave;
253 u8 value;
254 int ret;
255
256 if (!slave)
257 return 0;
258
259 /*
260 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive
261 * transfers with low enough latency between the nak/stop phase of the current
262 * command and the start/address phase of the following command that the
263 * interrupts are coalesced by the time we process them.
264 */
265 if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
266 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
267 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
268 }
269
270 if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
271 bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
272 irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
273 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
274 }
275
276 /* Propagate any stop conditions to the slave implementation. */
277 if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
278 i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
279 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
280 }
281
282 /*
283 * Now that we've dealt with any potentially coalesced stop conditions,
284 * address any start conditions.
285 */
286 if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
287 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
288 bus->slave_state = ASPEED_I2C_SLAVE_START;
289 }
290
291 /*
292 * If the slave has been stopped and not started then slave interrupt
293 * handling is complete.
294 */
295 if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
296 return irq_handled;
297
298 command = readl(bus->base + ASPEED_I2C_CMD_REG);
299 dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
300 irq_status, command);
301
302 /* Slave was sent something. */
303 if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
304 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
305 /* Handle address frame. */
306 if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
307 if (value & 0x1)
308 bus->slave_state =
309 ASPEED_I2C_SLAVE_READ_REQUESTED;
310 else
311 bus->slave_state =
312 ASPEED_I2C_SLAVE_WRITE_REQUESTED;
313 }
314 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
315 }
316
317 switch (bus->slave_state) {
318 case ASPEED_I2C_SLAVE_READ_REQUESTED:
319 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
320 dev_err(bus->dev, "Unexpected ACK on read request.\n");
321 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
322 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
323 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
324 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
325 break;
326 case ASPEED_I2C_SLAVE_READ_PROCESSED:
327 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
328 dev_err(bus->dev,
329 "Expected ACK after processed read.\n");
330 break;
331 }
332 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
333 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
334 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
335 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
336 break;
337 case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
338 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
339 ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
340 /*
341 * Slave ACK's on this address phase already but as the backend driver
342 * returns an errno, the bus driver should nack the next incoming byte.
343 */
344 if (ret < 0)
345 writel(ASPEED_I2CD_M_S_RX_CMD_LAST, bus->base + ASPEED_I2C_CMD_REG);
346 break;
347 case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
348 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
349 break;
350 case ASPEED_I2C_SLAVE_STOP:
351 /* Stop event handling is done early. Unreachable. */
352 break;
353 case ASPEED_I2C_SLAVE_START:
354 /* Slave was just started. Waiting for the next event. */;
355 break;
356 default:
357 dev_err(bus->dev, "unknown slave_state: %d\n",
358 bus->slave_state);
359 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
360 break;
361 }
362
363 return irq_handled;
364 }
365 #endif /* CONFIG_I2C_SLAVE */
366
367 /* precondition: bus.lock has been acquired. */
aspeed_i2c_do_start(struct aspeed_i2c_bus * bus)368 static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
369 {
370 u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
371 struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
372 u8 slave_addr = i2c_8bit_addr_from_msg(msg);
373
374 #if IS_ENABLED(CONFIG_I2C_SLAVE)
375 /*
376 * If it's requested in the middle of a slave session, set the master
377 * state to 'pending' then H/W will continue handling this master
378 * command when the bus comes back to the idle state.
379 */
380 if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) {
381 bus->master_state = ASPEED_I2C_MASTER_PENDING;
382 return;
383 }
384 #endif /* CONFIG_I2C_SLAVE */
385
386 bus->master_state = ASPEED_I2C_MASTER_START;
387 bus->buf_index = 0;
388
389 if (msg->flags & I2C_M_RD) {
390 command |= ASPEED_I2CD_M_RX_CMD;
391 /* Need to let the hardware know to NACK after RX. */
392 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
393 command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
394 }
395
396 writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
397 writel(command, bus->base + ASPEED_I2C_CMD_REG);
398 }
399
400 /* precondition: bus.lock has been acquired. */
aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus * bus)401 static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
402 {
403 if (bus->msgs_index + 1 < bus->msgs_count) {
404 bus->msgs_index++;
405 aspeed_i2c_do_start(bus);
406 } else {
407 aspeed_i2c_do_stop(bus);
408 }
409 }
410
aspeed_i2c_is_irq_error(u32 irq_status)411 static int aspeed_i2c_is_irq_error(u32 irq_status)
412 {
413 if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
414 return -EAGAIN;
415 if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
416 ASPEED_I2CD_INTR_SCL_TIMEOUT))
417 return -EBUSY;
418 if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
419 return -EPROTO;
420
421 return 0;
422 }
423
aspeed_i2c_master_irq(struct aspeed_i2c_bus * bus,u32 irq_status)424 static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
425 {
426 u32 irq_handled = 0, command = 0;
427 struct i2c_msg *msg;
428 u8 recv_byte;
429 int ret;
430
431 if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
432 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
433 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
434 goto out_complete;
435 }
436
437 /*
438 * We encountered an interrupt that reports an error: the hardware
439 * should clear the command queue effectively taking us back to the
440 * INACTIVE state.
441 */
442 ret = aspeed_i2c_is_irq_error(irq_status);
443 if (ret) {
444 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
445 irq_status);
446 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
447 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
448 bus->cmd_err = ret;
449 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
450 goto out_complete;
451 }
452 }
453
454 /* Master is not currently active, irq was for someone else. */
455 if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE ||
456 bus->master_state == ASPEED_I2C_MASTER_PENDING)
457 goto out_no_complete;
458
459 /* We are in an invalid state; reset bus to a known state. */
460 if (!bus->msgs) {
461 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n",
462 irq_status);
463 bus->cmd_err = -EIO;
464 if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
465 bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
466 aspeed_i2c_do_stop(bus);
467 goto out_no_complete;
468 }
469 msg = &bus->msgs[bus->msgs_index];
470
471 /*
472 * START is a special case because we still have to handle a subsequent
473 * TX or RX immediately after we handle it, so we handle it here and
474 * then update the state and handle the new state below.
475 */
476 if (bus->master_state == ASPEED_I2C_MASTER_START) {
477 #if IS_ENABLED(CONFIG_I2C_SLAVE)
478 /*
479 * If a peer master starts a xfer immediately after it queues a
480 * master command, clear the queued master command and change
481 * its state to 'pending'. To simplify handling of pending
482 * cases, it uses S/W solution instead of H/W command queue
483 * handling.
484 */
485 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) {
486 writel(readl(bus->base + ASPEED_I2C_CMD_REG) &
487 ~ASPEED_I2CD_MASTER_CMDS_MASK,
488 bus->base + ASPEED_I2C_CMD_REG);
489 bus->master_state = ASPEED_I2C_MASTER_PENDING;
490 dev_dbg(bus->dev,
491 "master goes pending due to a slave start\n");
492 goto out_no_complete;
493 }
494 #endif /* CONFIG_I2C_SLAVE */
495 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
496 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
497 bus->cmd_err = -ENXIO;
498 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
499 goto out_complete;
500 }
501 pr_devel("no slave present at %02x\n", msg->addr);
502 irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
503 bus->cmd_err = -ENXIO;
504 aspeed_i2c_do_stop(bus);
505 goto out_no_complete;
506 }
507 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
508 if (msg->len == 0) { /* SMBUS_QUICK */
509 aspeed_i2c_do_stop(bus);
510 goto out_no_complete;
511 }
512 if (msg->flags & I2C_M_RD)
513 bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
514 else
515 bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
516 }
517
518 switch (bus->master_state) {
519 case ASPEED_I2C_MASTER_TX:
520 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
521 dev_dbg(bus->dev, "slave NACKed TX\n");
522 irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
523 goto error_and_stop;
524 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
525 dev_err(bus->dev, "slave failed to ACK TX\n");
526 goto error_and_stop;
527 }
528 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
529 fallthrough;
530 case ASPEED_I2C_MASTER_TX_FIRST:
531 if (bus->buf_index < msg->len) {
532 bus->master_state = ASPEED_I2C_MASTER_TX;
533 writel(msg->buf[bus->buf_index++],
534 bus->base + ASPEED_I2C_BYTE_BUF_REG);
535 writel(ASPEED_I2CD_M_TX_CMD,
536 bus->base + ASPEED_I2C_CMD_REG);
537 } else {
538 aspeed_i2c_next_msg_or_stop(bus);
539 }
540 goto out_no_complete;
541 case ASPEED_I2C_MASTER_RX_FIRST:
542 /* RX may not have completed yet (only address cycle) */
543 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
544 goto out_no_complete;
545 fallthrough;
546 case ASPEED_I2C_MASTER_RX:
547 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
548 dev_err(bus->dev, "master failed to RX\n");
549 goto error_and_stop;
550 }
551 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
552
553 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
554 msg->buf[bus->buf_index++] = recv_byte;
555
556 if (msg->flags & I2C_M_RECV_LEN) {
557 if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
558 bus->cmd_err = -EPROTO;
559 aspeed_i2c_do_stop(bus);
560 goto out_no_complete;
561 }
562 msg->len = recv_byte +
563 ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
564 msg->flags &= ~I2C_M_RECV_LEN;
565 }
566
567 if (bus->buf_index < msg->len) {
568 bus->master_state = ASPEED_I2C_MASTER_RX;
569 command = ASPEED_I2CD_M_RX_CMD;
570 if (bus->buf_index + 1 == msg->len)
571 command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
572 writel(command, bus->base + ASPEED_I2C_CMD_REG);
573 } else {
574 aspeed_i2c_next_msg_or_stop(bus);
575 }
576 goto out_no_complete;
577 case ASPEED_I2C_MASTER_STOP:
578 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
579 dev_err(bus->dev,
580 "master failed to STOP. irq_status:0x%x\n",
581 irq_status);
582 bus->cmd_err = -EIO;
583 /* Do not STOP as we have already tried. */
584 } else {
585 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
586 }
587
588 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
589 goto out_complete;
590 case ASPEED_I2C_MASTER_INACTIVE:
591 dev_err(bus->dev,
592 "master received interrupt 0x%08x, but is inactive\n",
593 irq_status);
594 bus->cmd_err = -EIO;
595 /* Do not STOP as we should be inactive. */
596 goto out_complete;
597 default:
598 WARN(1, "unknown master state\n");
599 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
600 bus->cmd_err = -EINVAL;
601 goto out_complete;
602 }
603 error_and_stop:
604 bus->cmd_err = -EIO;
605 aspeed_i2c_do_stop(bus);
606 goto out_no_complete;
607 out_complete:
608 bus->msgs = NULL;
609 if (bus->cmd_err)
610 bus->master_xfer_result = bus->cmd_err;
611 else
612 bus->master_xfer_result = bus->msgs_index + 1;
613 complete(&bus->cmd_complete);
614 out_no_complete:
615 return irq_handled;
616 }
617
aspeed_i2c_bus_irq(int irq,void * dev_id)618 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
619 {
620 struct aspeed_i2c_bus *bus = dev_id;
621 u32 irq_received, irq_remaining, irq_handled;
622
623 spin_lock(&bus->lock);
624 irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
625 /* Ack all interrupts except for Rx done */
626 writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
627 bus->base + ASPEED_I2C_INTR_STS_REG);
628 readl(bus->base + ASPEED_I2C_INTR_STS_REG);
629 irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
630 irq_remaining = irq_received;
631
632 #if IS_ENABLED(CONFIG_I2C_SLAVE)
633 /*
634 * In most cases, interrupt bits will be set one by one, although
635 * multiple interrupt bits could be set at the same time. It's also
636 * possible that master interrupt bits could be set along with slave
637 * interrupt bits. Each case needs to be handled using corresponding
638 * handlers depending on the current state.
639 */
640 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE &&
641 bus->master_state != ASPEED_I2C_MASTER_PENDING) {
642 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
643 irq_remaining &= ~irq_handled;
644 if (irq_remaining)
645 irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining);
646 } else {
647 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining);
648 irq_remaining &= ~irq_handled;
649 if (irq_remaining)
650 irq_handled |= aspeed_i2c_master_irq(bus,
651 irq_remaining);
652 }
653
654 /*
655 * Start a pending master command at here if a slave operation is
656 * completed.
657 */
658 if (bus->master_state == ASPEED_I2C_MASTER_PENDING &&
659 bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
660 aspeed_i2c_do_start(bus);
661 #else
662 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
663 #endif /* CONFIG_I2C_SLAVE */
664
665 irq_remaining &= ~irq_handled;
666 if (irq_remaining)
667 dev_err(bus->dev,
668 "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
669 irq_received, irq_handled);
670
671 /* Ack Rx done */
672 if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
673 writel(ASPEED_I2CD_INTR_RX_DONE,
674 bus->base + ASPEED_I2C_INTR_STS_REG);
675 readl(bus->base + ASPEED_I2C_INTR_STS_REG);
676 }
677 spin_unlock(&bus->lock);
678 return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
679 }
680
aspeed_i2c_master_xfer(struct i2c_adapter * adap,struct i2c_msg * msgs,int num)681 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
682 struct i2c_msg *msgs, int num)
683 {
684 struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
685 unsigned long time_left, flags;
686
687 spin_lock_irqsave(&bus->lock, flags);
688 bus->cmd_err = 0;
689
690 /* If bus is busy in a single master environment, attempt recovery. */
691 if (!bus->multi_master &&
692 (readl(bus->base + ASPEED_I2C_CMD_REG) &
693 ASPEED_I2CD_BUS_BUSY_STS)) {
694 int ret;
695
696 spin_unlock_irqrestore(&bus->lock, flags);
697 ret = aspeed_i2c_recover_bus(bus);
698 if (ret)
699 return ret;
700 spin_lock_irqsave(&bus->lock, flags);
701 }
702
703 bus->cmd_err = 0;
704 bus->msgs = msgs;
705 bus->msgs_index = 0;
706 bus->msgs_count = num;
707
708 reinit_completion(&bus->cmd_complete);
709 aspeed_i2c_do_start(bus);
710 spin_unlock_irqrestore(&bus->lock, flags);
711
712 time_left = wait_for_completion_timeout(&bus->cmd_complete,
713 bus->adap.timeout);
714
715 if (time_left == 0) {
716 /*
717 * In a multi-master setup, if a timeout occurs, attempt
718 * recovery. But if the bus is idle, we still need to reset the
719 * i2c controller to clear the remaining interrupts.
720 */
721 if (bus->multi_master &&
722 (readl(bus->base + ASPEED_I2C_CMD_REG) &
723 ASPEED_I2CD_BUS_BUSY_STS))
724 aspeed_i2c_recover_bus(bus);
725 else
726 aspeed_i2c_reset(bus);
727
728 /*
729 * If timed out and the state is still pending, drop the pending
730 * master command.
731 */
732 spin_lock_irqsave(&bus->lock, flags);
733 if (bus->master_state == ASPEED_I2C_MASTER_PENDING)
734 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
735 spin_unlock_irqrestore(&bus->lock, flags);
736
737 return -ETIMEDOUT;
738 }
739
740 return bus->master_xfer_result;
741 }
742
aspeed_i2c_functionality(struct i2c_adapter * adap)743 static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
744 {
745 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
746 }
747
748 #if IS_ENABLED(CONFIG_I2C_SLAVE)
749 /* precondition: bus.lock has been acquired. */
__aspeed_i2c_reg_slave(struct aspeed_i2c_bus * bus,u16 slave_addr)750 static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
751 {
752 u32 addr_reg_val, func_ctrl_reg_val;
753
754 /*
755 * Set slave addr. Reserved bits can all safely be written with zeros
756 * on all of ast2[456]00, so zero everything else to ensure we only
757 * enable a single slave address (ast2500 has two, ast2600 has three,
758 * the enable bits for which are also in this register) so that we don't
759 * end up with additional phantom devices responding on the bus.
760 */
761 addr_reg_val = slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
762 writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
763
764 /* Turn on slave mode. */
765 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
766 func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
767 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
768
769 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
770 }
771
aspeed_i2c_reg_slave(struct i2c_client * client)772 static int aspeed_i2c_reg_slave(struct i2c_client *client)
773 {
774 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
775 unsigned long flags;
776
777 spin_lock_irqsave(&bus->lock, flags);
778 if (bus->slave) {
779 spin_unlock_irqrestore(&bus->lock, flags);
780 return -EINVAL;
781 }
782
783 __aspeed_i2c_reg_slave(bus, client->addr);
784
785 bus->slave = client;
786 spin_unlock_irqrestore(&bus->lock, flags);
787
788 return 0;
789 }
790
aspeed_i2c_unreg_slave(struct i2c_client * client)791 static int aspeed_i2c_unreg_slave(struct i2c_client *client)
792 {
793 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
794 u32 func_ctrl_reg_val;
795 unsigned long flags;
796
797 spin_lock_irqsave(&bus->lock, flags);
798 if (!bus->slave) {
799 spin_unlock_irqrestore(&bus->lock, flags);
800 return -EINVAL;
801 }
802
803 /* Turn off slave mode. */
804 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
805 func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
806 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
807
808 bus->slave = NULL;
809 spin_unlock_irqrestore(&bus->lock, flags);
810
811 return 0;
812 }
813 #endif /* CONFIG_I2C_SLAVE */
814
815 static const struct i2c_algorithm aspeed_i2c_algo = {
816 .master_xfer = aspeed_i2c_master_xfer,
817 .functionality = aspeed_i2c_functionality,
818 #if IS_ENABLED(CONFIG_I2C_SLAVE)
819 .reg_slave = aspeed_i2c_reg_slave,
820 .unreg_slave = aspeed_i2c_unreg_slave,
821 #endif /* CONFIG_I2C_SLAVE */
822 };
823
aspeed_i2c_get_clk_reg_val(struct device * dev,u32 clk_high_low_mask,u32 divisor)824 static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
825 u32 clk_high_low_mask,
826 u32 divisor)
827 {
828 u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
829
830 /*
831 * SCL_high and SCL_low represent a value 1 greater than what is stored
832 * since a zero divider is meaningless. Thus, the max value each can
833 * store is every bit set + 1. Since SCL_high and SCL_low are added
834 * together (see below), the max value of both is the max value of one
835 * them times two.
836 */
837 clk_high_low_max = (clk_high_low_mask + 1) * 2;
838
839 /*
840 * The actual clock frequency of SCL is:
841 * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
842 * = APB_freq / divisor
843 * where base_freq is a programmable clock divider; its value is
844 * base_freq = 1 << base_clk_divisor
845 * SCL_high is the number of base_freq clock cycles that SCL stays high
846 * and SCL_low is the number of base_freq clock cycles that SCL stays
847 * low for a period of SCL.
848 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
849 * thus, they start counting at zero. So
850 * SCL_high = clk_high + 1
851 * SCL_low = clk_low + 1
852 * Thus,
853 * SCL_freq = APB_freq /
854 * ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
855 * The documentation recommends clk_high >= clk_high_max / 2 and
856 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
857 * gives us the following solution:
858 */
859 base_clk_divisor = divisor > clk_high_low_max ?
860 ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
861
862 if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
863 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
864 clk_low = clk_high_low_mask;
865 clk_high = clk_high_low_mask;
866 dev_err(dev,
867 "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
868 divisor, (1 << base_clk_divisor) * clk_high_low_max);
869 } else {
870 tmp = (divisor + (1 << base_clk_divisor) - 1)
871 >> base_clk_divisor;
872 clk_low = tmp / 2;
873 clk_high = tmp - clk_low;
874
875 if (clk_high)
876 clk_high--;
877
878 if (clk_low)
879 clk_low--;
880 }
881
882
883 return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
884 & ASPEED_I2CD_TIME_SCL_HIGH_MASK)
885 | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
886 & ASPEED_I2CD_TIME_SCL_LOW_MASK)
887 | (base_clk_divisor
888 & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
889 }
890
aspeed_i2c_24xx_get_clk_reg_val(struct device * dev,u32 divisor)891 static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
892 {
893 /*
894 * clk_high and clk_low are each 3 bits wide, so each can hold a max
895 * value of 8 giving a clk_high_low_max of 16.
896 */
897 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
898 }
899
aspeed_i2c_25xx_get_clk_reg_val(struct device * dev,u32 divisor)900 static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
901 {
902 /*
903 * clk_high and clk_low are each 4 bits wide, so each can hold a max
904 * value of 16 giving a clk_high_low_max of 32.
905 */
906 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
907 }
908
909 /* precondition: bus.lock has been acquired. */
aspeed_i2c_init_clk(struct aspeed_i2c_bus * bus)910 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
911 {
912 u32 divisor, clk_reg_val;
913
914 divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
915 clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
916 clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
917 ASPEED_I2CD_TIME_THDSTA_MASK |
918 ASPEED_I2CD_TIME_TACST_MASK);
919 clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
920 writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
921 writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
922
923 return 0;
924 }
925
926 /* precondition: bus.lock has been acquired. */
aspeed_i2c_init(struct aspeed_i2c_bus * bus,struct platform_device * pdev)927 static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
928 struct platform_device *pdev)
929 {
930 u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
931 int ret;
932
933 /* Disable everything. */
934 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
935
936 ret = aspeed_i2c_init_clk(bus);
937 if (ret < 0)
938 return ret;
939
940 if (of_property_read_bool(pdev->dev.of_node, "multi-master"))
941 bus->multi_master = true;
942 else
943 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
944
945 /* Enable Master Mode */
946 writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
947 bus->base + ASPEED_I2C_FUN_CTRL_REG);
948
949 #if IS_ENABLED(CONFIG_I2C_SLAVE)
950 /* If slave has already been registered, re-enable it. */
951 if (bus->slave)
952 __aspeed_i2c_reg_slave(bus, bus->slave->addr);
953 #endif /* CONFIG_I2C_SLAVE */
954
955 /* Set interrupt generation of I2C controller */
956 writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
957
958 return 0;
959 }
960
aspeed_i2c_reset(struct aspeed_i2c_bus * bus)961 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
962 {
963 struct platform_device *pdev = to_platform_device(bus->dev);
964 unsigned long flags;
965 int ret;
966
967 spin_lock_irqsave(&bus->lock, flags);
968
969 /* Disable and ack all interrupts. */
970 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
971 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
972
973 ret = aspeed_i2c_init(bus, pdev);
974
975 spin_unlock_irqrestore(&bus->lock, flags);
976
977 return ret;
978 }
979
980 static const struct of_device_id aspeed_i2c_bus_of_table[] = {
981 {
982 .compatible = "aspeed,ast2400-i2c-bus",
983 .data = aspeed_i2c_24xx_get_clk_reg_val,
984 },
985 {
986 .compatible = "aspeed,ast2500-i2c-bus",
987 .data = aspeed_i2c_25xx_get_clk_reg_val,
988 },
989 {
990 .compatible = "aspeed,ast2600-i2c-bus",
991 .data = aspeed_i2c_25xx_get_clk_reg_val,
992 },
993 { },
994 };
995 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
996
aspeed_i2c_probe_bus(struct platform_device * pdev)997 static int aspeed_i2c_probe_bus(struct platform_device *pdev)
998 {
999 const struct of_device_id *match;
1000 struct aspeed_i2c_bus *bus;
1001 struct clk *parent_clk;
1002 int irq, ret;
1003
1004 bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
1005 if (!bus)
1006 return -ENOMEM;
1007
1008 bus->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
1009 if (IS_ERR(bus->base))
1010 return PTR_ERR(bus->base);
1011
1012 parent_clk = devm_clk_get(&pdev->dev, NULL);
1013 if (IS_ERR(parent_clk))
1014 return PTR_ERR(parent_clk);
1015 bus->parent_clk_frequency = clk_get_rate(parent_clk);
1016 /* We just need the clock rate, we don't actually use the clk object. */
1017 devm_clk_put(&pdev->dev, parent_clk);
1018
1019 bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
1020 if (IS_ERR(bus->rst)) {
1021 dev_err(&pdev->dev,
1022 "missing or invalid reset controller device tree entry\n");
1023 return PTR_ERR(bus->rst);
1024 }
1025 reset_control_deassert(bus->rst);
1026
1027 ret = of_property_read_u32(pdev->dev.of_node,
1028 "bus-frequency", &bus->bus_frequency);
1029 if (ret < 0) {
1030 dev_err(&pdev->dev,
1031 "Could not read bus-frequency property\n");
1032 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
1033 }
1034
1035 match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
1036 if (!match)
1037 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
1038 else
1039 bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
1040 match->data;
1041
1042 /* Initialize the I2C adapter */
1043 spin_lock_init(&bus->lock);
1044 init_completion(&bus->cmd_complete);
1045 bus->adap.owner = THIS_MODULE;
1046 bus->adap.retries = 0;
1047 bus->adap.algo = &aspeed_i2c_algo;
1048 bus->adap.dev.parent = &pdev->dev;
1049 bus->adap.dev.of_node = pdev->dev.of_node;
1050 strscpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
1051 i2c_set_adapdata(&bus->adap, bus);
1052
1053 bus->dev = &pdev->dev;
1054
1055 /* Clean up any left over interrupt state. */
1056 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1057 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
1058 /*
1059 * bus.lock does not need to be held because the interrupt handler has
1060 * not been enabled yet.
1061 */
1062 ret = aspeed_i2c_init(bus, pdev);
1063 if (ret < 0)
1064 return ret;
1065
1066 irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
1067 ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
1068 0, dev_name(&pdev->dev), bus);
1069 if (ret < 0)
1070 return ret;
1071
1072 ret = i2c_add_adapter(&bus->adap);
1073 if (ret < 0)
1074 return ret;
1075
1076 platform_set_drvdata(pdev, bus);
1077
1078 dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
1079 bus->adap.nr, irq);
1080
1081 return 0;
1082 }
1083
aspeed_i2c_remove_bus(struct platform_device * pdev)1084 static void aspeed_i2c_remove_bus(struct platform_device *pdev)
1085 {
1086 struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
1087 unsigned long flags;
1088
1089 spin_lock_irqsave(&bus->lock, flags);
1090
1091 /* Disable everything. */
1092 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
1093 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1094
1095 spin_unlock_irqrestore(&bus->lock, flags);
1096
1097 reset_control_assert(bus->rst);
1098
1099 i2c_del_adapter(&bus->adap);
1100 }
1101
1102 static struct platform_driver aspeed_i2c_bus_driver = {
1103 .probe = aspeed_i2c_probe_bus,
1104 .remove_new = aspeed_i2c_remove_bus,
1105 .driver = {
1106 .name = "aspeed-i2c-bus",
1107 .of_match_table = aspeed_i2c_bus_of_table,
1108 },
1109 };
1110 module_platform_driver(aspeed_i2c_bus_driver);
1111
1112 MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
1113 MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
1114 MODULE_LICENSE("GPL v2");
1115