1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
4
5 Shamelessly ripped from i2c-piix4.c:
6
7 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
8 Philip Edelbrock <phil@netroedge.com>
9
10 */
11
12 /*
13 2002-04-08: Added nForce support. (Csaba Halasz)
14 2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
15 2002-12-28: Rewritten into something that resembles a Linux driver (hch)
16 2003-11-29: Added back AMD8111 removed by the previous rewrite.
17 (Philip Pokorny)
18 */
19
20 /*
21 Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
22 Note: we assume there can only be one device, with one SMBus interface.
23 */
24
25 #include <linux/module.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/delay.h>
29 #include <linux/stddef.h>
30 #include <linux/ioport.h>
31 #include <linux/i2c.h>
32 #include <linux/acpi.h>
33 #include <linux/io.h>
34
35 /* AMD756 SMBus address offsets */
36 #define SMB_ADDR_OFFSET 0xE0
37 #define SMB_IOSIZE 16
38 #define SMB_GLOBAL_STATUS (0x0 + amd756_ioport)
39 #define SMB_GLOBAL_ENABLE (0x2 + amd756_ioport)
40 #define SMB_HOST_ADDRESS (0x4 + amd756_ioport)
41 #define SMB_HOST_DATA (0x6 + amd756_ioport)
42 #define SMB_HOST_COMMAND (0x8 + amd756_ioport)
43 #define SMB_HOST_BLOCK_DATA (0x9 + amd756_ioport)
44 #define SMB_HAS_DATA (0xA + amd756_ioport)
45 #define SMB_HAS_DEVICE_ADDRESS (0xC + amd756_ioport)
46 #define SMB_HAS_HOST_ADDRESS (0xE + amd756_ioport)
47 #define SMB_SNOOP_ADDRESS (0xF + amd756_ioport)
48
49 /* PCI Address Constants */
50
51 /* address of I/O space */
52 #define SMBBA 0x058 /* mh */
53 #define SMBBANFORCE 0x014
54
55 /* general configuration */
56 #define SMBGCFG 0x041 /* mh */
57
58 /* silicon revision code */
59 #define SMBREV 0x008
60
61 /* Other settings */
62 #define MAX_TIMEOUT 500
63
64 /* AMD756 constants */
65 #define AMD756_QUICK 0x00
66 #define AMD756_BYTE 0x01
67 #define AMD756_BYTE_DATA 0x02
68 #define AMD756_WORD_DATA 0x03
69 #define AMD756_PROCESS_CALL 0x04
70 #define AMD756_BLOCK_DATA 0x05
71
72 static struct pci_driver amd756_driver;
73 static unsigned short amd756_ioport;
74
75 /*
76 SMBUS event = I/O 28-29 bit 11
77 see E0 for the status bits and enabled in E2
78
79 */
80 #define GS_ABRT_STS (1 << 0)
81 #define GS_COL_STS (1 << 1)
82 #define GS_PRERR_STS (1 << 2)
83 #define GS_HST_STS (1 << 3)
84 #define GS_HCYC_STS (1 << 4)
85 #define GS_TO_STS (1 << 5)
86 #define GS_SMB_STS (1 << 11)
87
88 #define GS_CLEAR_STS (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
89 GS_HCYC_STS | GS_TO_STS )
90
91 #define GE_CYC_TYPE_MASK (7)
92 #define GE_HOST_STC (1 << 3)
93 #define GE_ABORT (1 << 5)
94
95
amd756_transaction(struct i2c_adapter * adap)96 static int amd756_transaction(struct i2c_adapter *adap)
97 {
98 int temp;
99 int result = 0;
100 int timeout = 0;
101
102 dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
103 "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
104 inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
105 inb_p(SMB_HOST_DATA));
106
107 /* Make sure the SMBus host is ready to start transmitting */
108 if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
109 dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
110 do {
111 msleep(1);
112 temp = inw_p(SMB_GLOBAL_STATUS);
113 } while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
114 (timeout++ < MAX_TIMEOUT));
115 /* If the SMBus is still busy, we give up */
116 if (timeout > MAX_TIMEOUT) {
117 dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
118 goto abort;
119 }
120 timeout = 0;
121 }
122
123 /* start the transaction by setting the start bit */
124 outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);
125
126 /* We will always wait for a fraction of a second! */
127 do {
128 msleep(1);
129 temp = inw_p(SMB_GLOBAL_STATUS);
130 } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
131
132 /* If the SMBus is still busy, we give up */
133 if (timeout > MAX_TIMEOUT) {
134 dev_dbg(&adap->dev, "Completion timeout!\n");
135 goto abort;
136 }
137
138 if (temp & GS_PRERR_STS) {
139 result = -ENXIO;
140 dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
141 }
142
143 if (temp & GS_COL_STS) {
144 result = -EIO;
145 dev_warn(&adap->dev, "SMBus collision!\n");
146 }
147
148 if (temp & GS_TO_STS) {
149 result = -ETIMEDOUT;
150 dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
151 }
152
153 if (temp & GS_HCYC_STS)
154 dev_dbg(&adap->dev, "SMBus protocol success!\n");
155
156 outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
157
158 #ifdef DEBUG
159 if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
160 dev_dbg(&adap->dev,
161 "Failed reset at end of transaction (%04x)\n", temp);
162 }
163 #endif
164
165 dev_dbg(&adap->dev,
166 "Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
167 inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
168 inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
169
170 return result;
171
172 abort:
173 dev_warn(&adap->dev, "Sending abort\n");
174 outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
175 msleep(100);
176 outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
177 return -EIO;
178 }
179
180 /* Return negative errno on error. */
amd756_access(struct i2c_adapter * adap,u16 addr,unsigned short flags,char read_write,u8 command,int size,union i2c_smbus_data * data)181 static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
182 unsigned short flags, char read_write,
183 u8 command, int size, union i2c_smbus_data * data)
184 {
185 int i, len;
186 int status;
187
188 switch (size) {
189 case I2C_SMBUS_QUICK:
190 outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
191 SMB_HOST_ADDRESS);
192 size = AMD756_QUICK;
193 break;
194 case I2C_SMBUS_BYTE:
195 outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
196 SMB_HOST_ADDRESS);
197 if (read_write == I2C_SMBUS_WRITE)
198 outb_p(command, SMB_HOST_DATA);
199 size = AMD756_BYTE;
200 break;
201 case I2C_SMBUS_BYTE_DATA:
202 outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
203 SMB_HOST_ADDRESS);
204 outb_p(command, SMB_HOST_COMMAND);
205 if (read_write == I2C_SMBUS_WRITE)
206 outw_p(data->byte, SMB_HOST_DATA);
207 size = AMD756_BYTE_DATA;
208 break;
209 case I2C_SMBUS_WORD_DATA:
210 outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
211 SMB_HOST_ADDRESS);
212 outb_p(command, SMB_HOST_COMMAND);
213 if (read_write == I2C_SMBUS_WRITE)
214 outw_p(data->word, SMB_HOST_DATA); /* TODO: endian???? */
215 size = AMD756_WORD_DATA;
216 break;
217 case I2C_SMBUS_BLOCK_DATA:
218 outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
219 SMB_HOST_ADDRESS);
220 outb_p(command, SMB_HOST_COMMAND);
221 if (read_write == I2C_SMBUS_WRITE) {
222 len = data->block[0];
223 if (len < 0)
224 len = 0;
225 if (len > 32)
226 len = 32;
227 outw_p(len, SMB_HOST_DATA);
228 /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
229 for (i = 1; i <= len; i++)
230 outb_p(data->block[i],
231 SMB_HOST_BLOCK_DATA);
232 }
233 size = AMD756_BLOCK_DATA;
234 break;
235 default:
236 dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
237 return -EOPNOTSUPP;
238 }
239
240 /* How about enabling interrupts... */
241 outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
242
243 status = amd756_transaction(adap);
244 if (status)
245 return status;
246
247 if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
248 return 0;
249
250
251 switch (size) {
252 case AMD756_BYTE:
253 data->byte = inw_p(SMB_HOST_DATA);
254 break;
255 case AMD756_BYTE_DATA:
256 data->byte = inw_p(SMB_HOST_DATA);
257 break;
258 case AMD756_WORD_DATA:
259 data->word = inw_p(SMB_HOST_DATA); /* TODO: endian???? */
260 break;
261 case AMD756_BLOCK_DATA:
262 data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
263 if(data->block[0] > 32)
264 data->block[0] = 32;
265 /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
266 for (i = 1; i <= data->block[0]; i++)
267 data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
268 break;
269 }
270
271 return 0;
272 }
273
amd756_func(struct i2c_adapter * adapter)274 static u32 amd756_func(struct i2c_adapter *adapter)
275 {
276 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
277 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
278 I2C_FUNC_SMBUS_BLOCK_DATA;
279 }
280
281 static const struct i2c_algorithm smbus_algorithm = {
282 .smbus_xfer = amd756_access,
283 .functionality = amd756_func,
284 };
285
286 struct i2c_adapter amd756_smbus = {
287 .owner = THIS_MODULE,
288 .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
289 .algo = &smbus_algorithm,
290 };
291
292 enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
293 static const char* chipname[] = {
294 "AMD756", "AMD766", "AMD768",
295 "nVidia nForce", "AMD8111",
296 };
297
298 static const struct pci_device_id amd756_ids[] = {
299 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
300 .driver_data = AMD756 },
301 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
302 .driver_data = AMD766 },
303 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443),
304 .driver_data = AMD768 },
305 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS),
306 .driver_data = AMD8111 },
307 { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS),
308 .driver_data = NFORCE },
309 { 0, }
310 };
311
312 MODULE_DEVICE_TABLE (pci, amd756_ids);
313
amd756_probe(struct pci_dev * pdev,const struct pci_device_id * id)314 static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
315 {
316 int nforce = (id->driver_data == NFORCE);
317 int error;
318 u8 temp;
319
320 if (amd756_ioport) {
321 dev_err(&pdev->dev, "Only one device supported "
322 "(you have a strange motherboard, btw)\n");
323 return -ENODEV;
324 }
325
326 if (nforce) {
327 if (PCI_FUNC(pdev->devfn) != 1)
328 return -ENODEV;
329
330 pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
331 amd756_ioport &= 0xfffc;
332 } else { /* amd */
333 if (PCI_FUNC(pdev->devfn) != 3)
334 return -ENODEV;
335
336 pci_read_config_byte(pdev, SMBGCFG, &temp);
337 if ((temp & 128) == 0) {
338 dev_err(&pdev->dev,
339 "Error: SMBus controller I/O not enabled!\n");
340 return -ENODEV;
341 }
342
343 /* Determine the address of the SMBus areas */
344 /* Technically it is a dword but... */
345 pci_read_config_word(pdev, SMBBA, &amd756_ioport);
346 amd756_ioport &= 0xff00;
347 amd756_ioport += SMB_ADDR_OFFSET;
348 }
349
350 error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
351 amd756_driver.name);
352 if (error)
353 return -ENODEV;
354
355 if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
356 dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
357 amd756_ioport);
358 return -ENODEV;
359 }
360
361 pci_read_config_byte(pdev, SMBREV, &temp);
362 dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
363 dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport);
364
365 /* set up the sysfs linkage to our parent device */
366 amd756_smbus.dev.parent = &pdev->dev;
367
368 snprintf(amd756_smbus.name, sizeof(amd756_smbus.name),
369 "SMBus %s adapter at %04x", chipname[id->driver_data],
370 amd756_ioport);
371
372 error = i2c_add_adapter(&amd756_smbus);
373 if (error)
374 goto out_err;
375
376 return 0;
377
378 out_err:
379 release_region(amd756_ioport, SMB_IOSIZE);
380 return error;
381 }
382
amd756_remove(struct pci_dev * dev)383 static void amd756_remove(struct pci_dev *dev)
384 {
385 i2c_del_adapter(&amd756_smbus);
386 release_region(amd756_ioport, SMB_IOSIZE);
387 }
388
389 static struct pci_driver amd756_driver = {
390 .name = "amd756_smbus",
391 .id_table = amd756_ids,
392 .probe = amd756_probe,
393 .remove = amd756_remove,
394 };
395
396 module_pci_driver(amd756_driver);
397
398 MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
399 MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
400 MODULE_LICENSE("GPL");
401
402 EXPORT_SYMBOL(amd756_smbus);
403