1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AD9523 SPI Low Jitter Clock Generator 4 * 5 * Copyright 2012 Analog Devices Inc. 6 */ 7 8 #include <linux/device.h> 9 #include <linux/kernel.h> 10 #include <linux/slab.h> 11 #include <linux/sysfs.h> 12 #include <linux/spi/spi.h> 13 #include <linux/regulator/consumer.h> 14 #include <linux/gpio/consumer.h> 15 #include <linux/err.h> 16 #include <linux/module.h> 17 #include <linux/delay.h> 18 19 #include <linux/iio/iio.h> 20 #include <linux/iio/sysfs.h> 21 #include <linux/iio/frequency/ad9523.h> 22 23 #define AD9523_READ (1 << 15) 24 #define AD9523_WRITE (0 << 15) 25 #define AD9523_CNT(x) (((x) - 1) << 13) 26 #define AD9523_ADDR(x) ((x) & 0xFFF) 27 28 #define AD9523_R1B (1 << 16) 29 #define AD9523_R2B (2 << 16) 30 #define AD9523_R3B (3 << 16) 31 #define AD9523_TRANSF_LEN(x) ((x) >> 16) 32 33 #define AD9523_SERIAL_PORT_CONFIG (AD9523_R1B | 0x0) 34 #define AD9523_VERSION_REGISTER (AD9523_R1B | 0x2) 35 #define AD9523_PART_REGISTER (AD9523_R1B | 0x3) 36 #define AD9523_READBACK_CTRL (AD9523_R1B | 0x4) 37 38 #define AD9523_EEPROM_CUSTOMER_VERSION_ID (AD9523_R2B | 0x6) 39 40 #define AD9523_PLL1_REF_A_DIVIDER (AD9523_R2B | 0x11) 41 #define AD9523_PLL1_REF_B_DIVIDER (AD9523_R2B | 0x13) 42 #define AD9523_PLL1_REF_TEST_DIVIDER (AD9523_R1B | 0x14) 43 #define AD9523_PLL1_FEEDBACK_DIVIDER (AD9523_R2B | 0x17) 44 #define AD9523_PLL1_CHARGE_PUMP_CTRL (AD9523_R2B | 0x19) 45 #define AD9523_PLL1_INPUT_RECEIVERS_CTRL (AD9523_R1B | 0x1A) 46 #define AD9523_PLL1_REF_CTRL (AD9523_R1B | 0x1B) 47 #define AD9523_PLL1_MISC_CTRL (AD9523_R1B | 0x1C) 48 #define AD9523_PLL1_LOOP_FILTER_CTRL (AD9523_R1B | 0x1D) 49 50 #define AD9523_PLL2_CHARGE_PUMP (AD9523_R1B | 0xF0) 51 #define AD9523_PLL2_FEEDBACK_DIVIDER_AB (AD9523_R1B | 0xF1) 52 #define AD9523_PLL2_CTRL (AD9523_R1B | 0xF2) 53 #define AD9523_PLL2_VCO_CTRL (AD9523_R1B | 0xF3) 54 #define AD9523_PLL2_VCO_DIVIDER (AD9523_R1B | 0xF4) 55 #define AD9523_PLL2_LOOP_FILTER_CTRL (AD9523_R2B | 0xF6) 56 #define AD9523_PLL2_R2_DIVIDER (AD9523_R1B | 0xF7) 57 58 #define AD9523_CHANNEL_CLOCK_DIST(ch) (AD9523_R3B | (0x192 + 3 * ch)) 59 60 #define AD9523_PLL1_OUTPUT_CTRL (AD9523_R1B | 0x1BA) 61 #define AD9523_PLL1_OUTPUT_CHANNEL_CTRL (AD9523_R1B | 0x1BB) 62 63 #define AD9523_READBACK_0 (AD9523_R1B | 0x22C) 64 #define AD9523_READBACK_1 (AD9523_R1B | 0x22D) 65 66 #define AD9523_STATUS_SIGNALS (AD9523_R3B | 0x232) 67 #define AD9523_POWER_DOWN_CTRL (AD9523_R1B | 0x233) 68 #define AD9523_IO_UPDATE (AD9523_R1B | 0x234) 69 70 #define AD9523_EEPROM_DATA_XFER_STATUS (AD9523_R1B | 0xB00) 71 #define AD9523_EEPROM_ERROR_READBACK (AD9523_R1B | 0xB01) 72 #define AD9523_EEPROM_CTRL1 (AD9523_R1B | 0xB02) 73 #define AD9523_EEPROM_CTRL2 (AD9523_R1B | 0xB03) 74 75 /* AD9523_SERIAL_PORT_CONFIG */ 76 77 #define AD9523_SER_CONF_SDO_ACTIVE (1 << 7) 78 #define AD9523_SER_CONF_SOFT_RESET (1 << 5) 79 80 /* AD9523_READBACK_CTRL */ 81 #define AD9523_READBACK_CTRL_READ_BUFFERED (1 << 0) 82 83 /* AD9523_PLL1_CHARGE_PUMP_CTRL */ 84 #define AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(x) (((x) / 500) & 0x7F) 85 #define AD9523_PLL1_CHARGE_PUMP_TRISTATE (1 << 7) 86 #define AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL (3 << 8) 87 #define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 8) 88 #define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_UP (1 << 8) 89 #define AD9523_PLL1_CHARGE_PUMP_MODE_TRISTATE (0 << 8) 90 #define AD9523_PLL1_BACKLASH_PW_MIN (0 << 10) 91 #define AD9523_PLL1_BACKLASH_PW_LOW (1 << 10) 92 #define AD9523_PLL1_BACKLASH_PW_HIGH (2 << 10) 93 #define AD9523_PLL1_BACKLASH_PW_MAX (3 << 10) 94 95 /* AD9523_PLL1_INPUT_RECEIVERS_CTRL */ 96 #define AD9523_PLL1_REF_TEST_RCV_EN (1 << 7) 97 #define AD9523_PLL1_REFB_DIFF_RCV_EN (1 << 6) 98 #define AD9523_PLL1_REFA_DIFF_RCV_EN (1 << 5) 99 #define AD9523_PLL1_REFB_RCV_EN (1 << 4) 100 #define AD9523_PLL1_REFA_RCV_EN (1 << 3) 101 #define AD9523_PLL1_REFA_REFB_PWR_CTRL_EN (1 << 2) 102 #define AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN (1 << 1) 103 #define AD9523_PLL1_OSC_IN_DIFF_EN (1 << 0) 104 105 /* AD9523_PLL1_REF_CTRL */ 106 #define AD9523_PLL1_BYPASS_REF_TEST_DIV_EN (1 << 7) 107 #define AD9523_PLL1_BYPASS_FEEDBACK_DIV_EN (1 << 6) 108 #define AD9523_PLL1_ZERO_DELAY_MODE_INT (1 << 5) 109 #define AD9523_PLL1_ZERO_DELAY_MODE_EXT (0 << 5) 110 #define AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN (1 << 4) 111 #define AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN (1 << 3) 112 #define AD9523_PLL1_ZD_IN_DIFF_EN (1 << 2) 113 #define AD9523_PLL1_REFB_CMOS_NEG_INP_EN (1 << 1) 114 #define AD9523_PLL1_REFA_CMOS_NEG_INP_EN (1 << 0) 115 116 /* AD9523_PLL1_MISC_CTRL */ 117 #define AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN (1 << 7) 118 #define AD9523_PLL1_OSC_CTRL_FAIL_VCC_BY2_EN (1 << 6) 119 #define AD9523_PLL1_REF_MODE(x) ((x) << 2) 120 #define AD9523_PLL1_BYPASS_REFB_DIV (1 << 1) 121 #define AD9523_PLL1_BYPASS_REFA_DIV (1 << 0) 122 123 /* AD9523_PLL1_LOOP_FILTER_CTRL */ 124 #define AD9523_PLL1_LOOP_FILTER_RZERO(x) ((x) & 0xF) 125 126 /* AD9523_PLL2_CHARGE_PUMP */ 127 #define AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(x) ((x) / 3500) 128 129 /* AD9523_PLL2_FEEDBACK_DIVIDER_AB */ 130 #define AD9523_PLL2_FB_NDIV_A_CNT(x) (((x) & 0x3) << 6) 131 #define AD9523_PLL2_FB_NDIV_B_CNT(x) (((x) & 0x3F) << 0) 132 #define AD9523_PLL2_FB_NDIV(a, b) (4 * (b) + (a)) 133 134 /* AD9523_PLL2_CTRL */ 135 #define AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL (3 << 0) 136 #define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 0) 137 #define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_UP (1 << 0) 138 #define AD9523_PLL2_CHARGE_PUMP_MODE_TRISTATE (0 << 0) 139 #define AD9523_PLL2_BACKLASH_PW_MIN (0 << 2) 140 #define AD9523_PLL2_BACKLASH_PW_LOW (1 << 2) 141 #define AD9523_PLL2_BACKLASH_PW_HIGH (2 << 2) 142 #define AD9523_PLL2_BACKLASH_PW_MAX (3 << 1) 143 #define AD9523_PLL2_BACKLASH_CTRL_EN (1 << 4) 144 #define AD9523_PLL2_FREQ_DOUBLER_EN (1 << 5) 145 #define AD9523_PLL2_LOCK_DETECT_PWR_DOWN_EN (1 << 7) 146 147 /* AD9523_PLL2_VCO_CTRL */ 148 #define AD9523_PLL2_VCO_CALIBRATE (1 << 1) 149 #define AD9523_PLL2_FORCE_VCO_MIDSCALE (1 << 2) 150 #define AD9523_PLL2_FORCE_REFERENCE_VALID (1 << 3) 151 #define AD9523_PLL2_FORCE_RELEASE_SYNC (1 << 4) 152 153 /* AD9523_PLL2_VCO_DIVIDER */ 154 #define AD9523_PLL2_VCO_DIV_M1(x) ((((x) - 3) & 0x3) << 0) 155 #define AD9523_PLL2_VCO_DIV_M2(x) ((((x) - 3) & 0x3) << 4) 156 #define AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN (1 << 2) 157 #define AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN (1 << 6) 158 159 /* AD9523_PLL2_LOOP_FILTER_CTRL */ 160 #define AD9523_PLL2_LOOP_FILTER_CPOLE1(x) (((x) & 0x7) << 0) 161 #define AD9523_PLL2_LOOP_FILTER_RZERO(x) (((x) & 0x7) << 3) 162 #define AD9523_PLL2_LOOP_FILTER_RPOLE2(x) (((x) & 0x7) << 6) 163 #define AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN (1 << 8) 164 165 /* AD9523_PLL2_R2_DIVIDER */ 166 #define AD9523_PLL2_R2_DIVIDER_VAL(x) (((x) & 0x1F) << 0) 167 168 /* AD9523_CHANNEL_CLOCK_DIST */ 169 #define AD9523_CLK_DIST_DIV_PHASE(x) (((x) & 0x3F) << 18) 170 #define AD9523_CLK_DIST_DIV_PHASE_REV(x) ((ret >> 18) & 0x3F) 171 #define AD9523_CLK_DIST_DIV(x) ((((x) - 1) & 0x3FF) << 8) 172 #define AD9523_CLK_DIST_DIV_REV(x) (((ret >> 8) & 0x3FF) + 1) 173 #define AD9523_CLK_DIST_INV_DIV_OUTPUT_EN (1 << 7) 174 #define AD9523_CLK_DIST_IGNORE_SYNC_EN (1 << 6) 175 #define AD9523_CLK_DIST_PWR_DOWN_EN (1 << 5) 176 #define AD9523_CLK_DIST_LOW_PWR_MODE_EN (1 << 4) 177 #define AD9523_CLK_DIST_DRIVER_MODE(x) (((x) & 0xF) << 0) 178 179 /* AD9523_PLL1_OUTPUT_CTRL */ 180 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH6_M2 (1 << 7) 181 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH5_M2 (1 << 6) 182 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 (1 << 5) 183 #define AD9523_PLL1_OUTP_CTRL_CMOS_DRV_WEAK (1 << 4) 184 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_1 (0 << 0) 185 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_2 (1 << 0) 186 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_4 (2 << 0) 187 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_8 (4 << 0) 188 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_16 (8 << 0) 189 190 /* AD9523_PLL1_OUTPUT_CHANNEL_CTRL */ 191 #define AD9523_PLL1_OUTP_CH_CTRL_OUTPUT_PWR_DOWN_EN (1 << 7) 192 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH9_M2 (1 << 6) 193 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH8_M2 (1 << 5) 194 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 (1 << 4) 195 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH3 (1 << 3) 196 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH2 (1 << 2) 197 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH1 (1 << 1) 198 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 (1 << 0) 199 200 /* AD9523_READBACK_0 */ 201 #define AD9523_READBACK_0_STAT_PLL2_REF_CLK (1 << 7) 202 #define AD9523_READBACK_0_STAT_PLL2_FB_CLK (1 << 6) 203 #define AD9523_READBACK_0_STAT_VCXO (1 << 5) 204 #define AD9523_READBACK_0_STAT_REF_TEST (1 << 4) 205 #define AD9523_READBACK_0_STAT_REFB (1 << 3) 206 #define AD9523_READBACK_0_STAT_REFA (1 << 2) 207 #define AD9523_READBACK_0_STAT_PLL2_LD (1 << 1) 208 #define AD9523_READBACK_0_STAT_PLL1_LD (1 << 0) 209 210 /* AD9523_READBACK_1 */ 211 #define AD9523_READBACK_1_HOLDOVER_ACTIVE (1 << 3) 212 #define AD9523_READBACK_1_AUTOMODE_SEL_REFB (1 << 2) 213 #define AD9523_READBACK_1_VCO_CALIB_IN_PROGRESS (1 << 0) 214 215 /* AD9523_STATUS_SIGNALS */ 216 #define AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL (1 << 16) 217 #define AD9523_STATUS_MONITOR_01_PLL12_LOCKED (0x302) 218 /* AD9523_POWER_DOWN_CTRL */ 219 #define AD9523_POWER_DOWN_CTRL_PLL1_PWR_DOWN (1 << 2) 220 #define AD9523_POWER_DOWN_CTRL_PLL2_PWR_DOWN (1 << 1) 221 #define AD9523_POWER_DOWN_CTRL_DIST_PWR_DOWN (1 << 0) 222 223 /* AD9523_IO_UPDATE */ 224 #define AD9523_IO_UPDATE_EN (1 << 0) 225 226 /* AD9523_EEPROM_DATA_XFER_STATUS */ 227 #define AD9523_EEPROM_DATA_XFER_IN_PROGRESS (1 << 0) 228 229 /* AD9523_EEPROM_ERROR_READBACK */ 230 #define AD9523_EEPROM_ERROR_READBACK_FAIL (1 << 0) 231 232 /* AD9523_EEPROM_CTRL1 */ 233 #define AD9523_EEPROM_CTRL1_SOFT_EEPROM (1 << 1) 234 #define AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS (1 << 0) 235 236 /* AD9523_EEPROM_CTRL2 */ 237 #define AD9523_EEPROM_CTRL2_REG2EEPROM (1 << 0) 238 239 #define AD9523_NUM_CHAN 14 240 #define AD9523_NUM_CHAN_ALT_CLK_SRC 10 241 242 /* Helpers to avoid excess line breaks */ 243 #define AD_IFE(_pde, _a, _b) ((pdata->_pde) ? _a : _b) 244 #define AD_IF(_pde, _a) AD_IFE(_pde, _a, 0) 245 246 enum { 247 AD9523_STAT_PLL1_LD, 248 AD9523_STAT_PLL2_LD, 249 AD9523_STAT_REFA, 250 AD9523_STAT_REFB, 251 AD9523_STAT_REF_TEST, 252 AD9523_STAT_VCXO, 253 AD9523_STAT_PLL2_FB_CLK, 254 AD9523_STAT_PLL2_REF_CLK, 255 AD9523_SYNC, 256 AD9523_EEPROM, 257 }; 258 259 enum { 260 AD9523_VCO1, 261 AD9523_VCO2, 262 AD9523_VCXO, 263 AD9523_NUM_CLK_SRC, 264 }; 265 266 struct ad9523_state { 267 struct spi_device *spi; 268 struct ad9523_platform_data *pdata; 269 struct iio_chan_spec ad9523_channels[AD9523_NUM_CHAN]; 270 struct gpio_desc *pwrdown_gpio; 271 struct gpio_desc *reset_gpio; 272 struct gpio_desc *sync_gpio; 273 274 unsigned long vcxo_freq; 275 unsigned long vco_freq; 276 unsigned long vco_out_freq[AD9523_NUM_CLK_SRC]; 277 unsigned char vco_out_map[AD9523_NUM_CHAN_ALT_CLK_SRC]; 278 279 /* 280 * Lock for accessing device registers. Some operations require 281 * multiple consecutive R/W operations, during which the device 282 * shouldn't be interrupted. The buffers are also shared across 283 * all operations so need to be protected on stand alone reads and 284 * writes. 285 */ 286 struct mutex lock; 287 288 /* 289 * DMA (thus cache coherency maintenance) may require that 290 * transfer buffers live in their own cache lines. 291 */ 292 union { 293 __be32 d32; 294 u8 d8[4]; 295 } data[2] __aligned(IIO_DMA_MINALIGN); 296 }; 297 ad9523_read(struct iio_dev * indio_dev,unsigned int addr)298 static int ad9523_read(struct iio_dev *indio_dev, unsigned int addr) 299 { 300 struct ad9523_state *st = iio_priv(indio_dev); 301 int ret; 302 303 /* We encode the register size 1..3 bytes into the register address. 304 * On transfer we get the size from the register datum, and make sure 305 * the result is properly aligned. 306 */ 307 308 struct spi_transfer t[] = { 309 { 310 .tx_buf = &st->data[0].d8[2], 311 .len = 2, 312 }, { 313 .rx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], 314 .len = AD9523_TRANSF_LEN(addr), 315 }, 316 }; 317 318 st->data[0].d32 = cpu_to_be32(AD9523_READ | 319 AD9523_CNT(AD9523_TRANSF_LEN(addr)) | 320 AD9523_ADDR(addr)); 321 322 ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); 323 if (ret < 0) 324 dev_err(&indio_dev->dev, "read failed (%d)", ret); 325 else 326 ret = be32_to_cpu(st->data[1].d32) & (0xFFFFFF >> 327 (8 * (3 - AD9523_TRANSF_LEN(addr)))); 328 329 return ret; 330 }; 331 ad9523_write(struct iio_dev * indio_dev,unsigned int addr,unsigned int val)332 static int ad9523_write(struct iio_dev *indio_dev, 333 unsigned int addr, unsigned int val) 334 { 335 struct ad9523_state *st = iio_priv(indio_dev); 336 int ret; 337 struct spi_transfer t[] = { 338 { 339 .tx_buf = &st->data[0].d8[2], 340 .len = 2, 341 }, { 342 .tx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], 343 .len = AD9523_TRANSF_LEN(addr), 344 }, 345 }; 346 347 st->data[0].d32 = cpu_to_be32(AD9523_WRITE | 348 AD9523_CNT(AD9523_TRANSF_LEN(addr)) | 349 AD9523_ADDR(addr)); 350 st->data[1].d32 = cpu_to_be32(val); 351 352 ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); 353 354 if (ret < 0) 355 dev_err(&indio_dev->dev, "write failed (%d)", ret); 356 357 return ret; 358 } 359 ad9523_io_update(struct iio_dev * indio_dev)360 static int ad9523_io_update(struct iio_dev *indio_dev) 361 { 362 return ad9523_write(indio_dev, AD9523_IO_UPDATE, AD9523_IO_UPDATE_EN); 363 } 364 ad9523_vco_out_map(struct iio_dev * indio_dev,unsigned int ch,unsigned int out)365 static int ad9523_vco_out_map(struct iio_dev *indio_dev, 366 unsigned int ch, unsigned int out) 367 { 368 struct ad9523_state *st = iio_priv(indio_dev); 369 int ret; 370 unsigned int mask; 371 372 switch (ch) { 373 case 0 ... 3: 374 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); 375 if (ret < 0) 376 break; 377 mask = AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 << ch; 378 if (out) { 379 ret |= mask; 380 out = 2; 381 } else { 382 ret &= ~mask; 383 } 384 ret = ad9523_write(indio_dev, 385 AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); 386 break; 387 case 4 ... 6: 388 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CTRL); 389 if (ret < 0) 390 break; 391 mask = AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 << (ch - 4); 392 if (out) 393 ret |= mask; 394 else 395 ret &= ~mask; 396 ret = ad9523_write(indio_dev, AD9523_PLL1_OUTPUT_CTRL, ret); 397 break; 398 case 7 ... 9: 399 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); 400 if (ret < 0) 401 break; 402 mask = AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 << (ch - 7); 403 if (out) 404 ret |= mask; 405 else 406 ret &= ~mask; 407 ret = ad9523_write(indio_dev, 408 AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); 409 break; 410 default: 411 return 0; 412 } 413 414 st->vco_out_map[ch] = out; 415 416 return ret; 417 } 418 ad9523_set_clock_provider(struct iio_dev * indio_dev,unsigned int ch,unsigned long freq)419 static int ad9523_set_clock_provider(struct iio_dev *indio_dev, 420 unsigned int ch, unsigned long freq) 421 { 422 struct ad9523_state *st = iio_priv(indio_dev); 423 long tmp1, tmp2; 424 bool use_alt_clk_src; 425 426 switch (ch) { 427 case 0 ... 3: 428 use_alt_clk_src = (freq == st->vco_out_freq[AD9523_VCXO]); 429 break; 430 case 4 ... 9: 431 tmp1 = st->vco_out_freq[AD9523_VCO1] / freq; 432 tmp2 = st->vco_out_freq[AD9523_VCO2] / freq; 433 tmp1 *= freq; 434 tmp2 *= freq; 435 use_alt_clk_src = (abs(tmp1 - freq) > abs(tmp2 - freq)); 436 break; 437 default: 438 /* Ch 10..14: No action required, return success */ 439 return 0; 440 } 441 442 return ad9523_vco_out_map(indio_dev, ch, use_alt_clk_src); 443 } 444 ad9523_store_eeprom(struct iio_dev * indio_dev)445 static int ad9523_store_eeprom(struct iio_dev *indio_dev) 446 { 447 int ret, tmp; 448 449 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 450 AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS); 451 if (ret < 0) 452 return ret; 453 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL2, 454 AD9523_EEPROM_CTRL2_REG2EEPROM); 455 if (ret < 0) 456 return ret; 457 458 tmp = 4; 459 do { 460 msleep(20); 461 ret = ad9523_read(indio_dev, 462 AD9523_EEPROM_DATA_XFER_STATUS); 463 if (ret < 0) 464 return ret; 465 } while ((ret & AD9523_EEPROM_DATA_XFER_IN_PROGRESS) && tmp--); 466 467 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 0); 468 if (ret < 0) 469 return ret; 470 471 ret = ad9523_read(indio_dev, AD9523_EEPROM_ERROR_READBACK); 472 if (ret < 0) 473 return ret; 474 475 if (ret & AD9523_EEPROM_ERROR_READBACK_FAIL) { 476 dev_err(&indio_dev->dev, "Verify EEPROM failed"); 477 ret = -EIO; 478 } 479 480 return ret; 481 } 482 ad9523_sync(struct iio_dev * indio_dev)483 static int ad9523_sync(struct iio_dev *indio_dev) 484 { 485 int ret, tmp; 486 487 ret = ad9523_read(indio_dev, AD9523_STATUS_SIGNALS); 488 if (ret < 0) 489 return ret; 490 491 tmp = ret; 492 tmp |= AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; 493 494 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); 495 if (ret < 0) 496 return ret; 497 498 ad9523_io_update(indio_dev); 499 tmp &= ~AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; 500 501 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); 502 if (ret < 0) 503 return ret; 504 505 return ad9523_io_update(indio_dev); 506 } 507 ad9523_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t len)508 static ssize_t ad9523_store(struct device *dev, 509 struct device_attribute *attr, 510 const char *buf, size_t len) 511 { 512 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 513 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); 514 struct ad9523_state *st = iio_priv(indio_dev); 515 bool state; 516 int ret; 517 518 ret = kstrtobool(buf, &state); 519 if (ret < 0) 520 return ret; 521 522 if (!state) 523 return len; 524 525 mutex_lock(&st->lock); 526 switch ((u32)this_attr->address) { 527 case AD9523_SYNC: 528 ret = ad9523_sync(indio_dev); 529 break; 530 case AD9523_EEPROM: 531 ret = ad9523_store_eeprom(indio_dev); 532 break; 533 default: 534 ret = -ENODEV; 535 } 536 mutex_unlock(&st->lock); 537 538 return ret ? ret : len; 539 } 540 ad9523_show(struct device * dev,struct device_attribute * attr,char * buf)541 static ssize_t ad9523_show(struct device *dev, 542 struct device_attribute *attr, 543 char *buf) 544 { 545 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 546 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); 547 struct ad9523_state *st = iio_priv(indio_dev); 548 int ret; 549 550 mutex_lock(&st->lock); 551 ret = ad9523_read(indio_dev, AD9523_READBACK_0); 552 if (ret >= 0) { 553 ret = sysfs_emit(buf, "%d\n", !!(ret & (1 << 554 (u32)this_attr->address))); 555 } 556 mutex_unlock(&st->lock); 557 558 return ret; 559 } 560 561 static IIO_DEVICE_ATTR(pll1_locked, S_IRUGO, 562 ad9523_show, 563 NULL, 564 AD9523_STAT_PLL1_LD); 565 566 static IIO_DEVICE_ATTR(pll2_locked, S_IRUGO, 567 ad9523_show, 568 NULL, 569 AD9523_STAT_PLL2_LD); 570 571 static IIO_DEVICE_ATTR(pll1_reference_clk_a_present, S_IRUGO, 572 ad9523_show, 573 NULL, 574 AD9523_STAT_REFA); 575 576 static IIO_DEVICE_ATTR(pll1_reference_clk_b_present, S_IRUGO, 577 ad9523_show, 578 NULL, 579 AD9523_STAT_REFB); 580 581 static IIO_DEVICE_ATTR(pll1_reference_clk_test_present, S_IRUGO, 582 ad9523_show, 583 NULL, 584 AD9523_STAT_REF_TEST); 585 586 static IIO_DEVICE_ATTR(vcxo_clk_present, S_IRUGO, 587 ad9523_show, 588 NULL, 589 AD9523_STAT_VCXO); 590 591 static IIO_DEVICE_ATTR(pll2_feedback_clk_present, S_IRUGO, 592 ad9523_show, 593 NULL, 594 AD9523_STAT_PLL2_FB_CLK); 595 596 static IIO_DEVICE_ATTR(pll2_reference_clk_present, S_IRUGO, 597 ad9523_show, 598 NULL, 599 AD9523_STAT_PLL2_REF_CLK); 600 601 static IIO_DEVICE_ATTR(sync_dividers, S_IWUSR, 602 NULL, 603 ad9523_store, 604 AD9523_SYNC); 605 606 static IIO_DEVICE_ATTR(store_eeprom, S_IWUSR, 607 NULL, 608 ad9523_store, 609 AD9523_EEPROM); 610 611 static struct attribute *ad9523_attributes[] = { 612 &iio_dev_attr_sync_dividers.dev_attr.attr, 613 &iio_dev_attr_store_eeprom.dev_attr.attr, 614 &iio_dev_attr_pll2_feedback_clk_present.dev_attr.attr, 615 &iio_dev_attr_pll2_reference_clk_present.dev_attr.attr, 616 &iio_dev_attr_pll1_reference_clk_a_present.dev_attr.attr, 617 &iio_dev_attr_pll1_reference_clk_b_present.dev_attr.attr, 618 &iio_dev_attr_pll1_reference_clk_test_present.dev_attr.attr, 619 &iio_dev_attr_vcxo_clk_present.dev_attr.attr, 620 &iio_dev_attr_pll1_locked.dev_attr.attr, 621 &iio_dev_attr_pll2_locked.dev_attr.attr, 622 NULL, 623 }; 624 625 static const struct attribute_group ad9523_attribute_group = { 626 .attrs = ad9523_attributes, 627 }; 628 ad9523_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long m)629 static int ad9523_read_raw(struct iio_dev *indio_dev, 630 struct iio_chan_spec const *chan, 631 int *val, 632 int *val2, 633 long m) 634 { 635 struct ad9523_state *st = iio_priv(indio_dev); 636 unsigned int code; 637 int ret; 638 639 mutex_lock(&st->lock); 640 ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); 641 mutex_unlock(&st->lock); 642 643 if (ret < 0) 644 return ret; 645 646 switch (m) { 647 case IIO_CHAN_INFO_RAW: 648 *val = !(ret & AD9523_CLK_DIST_PWR_DOWN_EN); 649 return IIO_VAL_INT; 650 case IIO_CHAN_INFO_FREQUENCY: 651 *val = st->vco_out_freq[st->vco_out_map[chan->channel]] / 652 AD9523_CLK_DIST_DIV_REV(ret); 653 return IIO_VAL_INT; 654 case IIO_CHAN_INFO_PHASE: 655 code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) / 656 AD9523_CLK_DIST_DIV_REV(ret); 657 *val = code / 1000000; 658 *val2 = code % 1000000; 659 return IIO_VAL_INT_PLUS_MICRO; 660 default: 661 return -EINVAL; 662 } 663 }; 664 ad9523_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)665 static int ad9523_write_raw(struct iio_dev *indio_dev, 666 struct iio_chan_spec const *chan, 667 int val, 668 int val2, 669 long mask) 670 { 671 struct ad9523_state *st = iio_priv(indio_dev); 672 unsigned int reg; 673 int ret, tmp, code; 674 675 mutex_lock(&st->lock); 676 ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); 677 if (ret < 0) 678 goto out; 679 680 reg = ret; 681 682 switch (mask) { 683 case IIO_CHAN_INFO_RAW: 684 if (val) 685 reg &= ~AD9523_CLK_DIST_PWR_DOWN_EN; 686 else 687 reg |= AD9523_CLK_DIST_PWR_DOWN_EN; 688 break; 689 case IIO_CHAN_INFO_FREQUENCY: 690 if (val <= 0) { 691 ret = -EINVAL; 692 goto out; 693 } 694 ret = ad9523_set_clock_provider(indio_dev, chan->channel, val); 695 if (ret < 0) 696 goto out; 697 tmp = st->vco_out_freq[st->vco_out_map[chan->channel]] / val; 698 tmp = clamp(tmp, 1, 1024); 699 reg &= ~(0x3FF << 8); 700 reg |= AD9523_CLK_DIST_DIV(tmp); 701 break; 702 case IIO_CHAN_INFO_PHASE: 703 code = val * 1000000 + val2 % 1000000; 704 tmp = (code * AD9523_CLK_DIST_DIV_REV(ret)) / 3141592; 705 tmp = clamp(tmp, 0, 63); 706 reg &= ~AD9523_CLK_DIST_DIV_PHASE(~0); 707 reg |= AD9523_CLK_DIST_DIV_PHASE(tmp); 708 break; 709 default: 710 ret = -EINVAL; 711 goto out; 712 } 713 714 ret = ad9523_write(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel), 715 reg); 716 if (ret < 0) 717 goto out; 718 719 ad9523_io_update(indio_dev); 720 out: 721 mutex_unlock(&st->lock); 722 return ret; 723 } 724 ad9523_reg_access(struct iio_dev * indio_dev,unsigned int reg,unsigned int writeval,unsigned int * readval)725 static int ad9523_reg_access(struct iio_dev *indio_dev, 726 unsigned int reg, unsigned int writeval, 727 unsigned int *readval) 728 { 729 struct ad9523_state *st = iio_priv(indio_dev); 730 int ret; 731 732 mutex_lock(&st->lock); 733 if (readval == NULL) { 734 ret = ad9523_write(indio_dev, reg | AD9523_R1B, writeval); 735 ad9523_io_update(indio_dev); 736 } else { 737 ret = ad9523_read(indio_dev, reg | AD9523_R1B); 738 if (ret < 0) 739 goto out_unlock; 740 *readval = ret; 741 ret = 0; 742 } 743 744 out_unlock: 745 mutex_unlock(&st->lock); 746 747 return ret; 748 } 749 750 static const struct iio_info ad9523_info = { 751 .read_raw = &ad9523_read_raw, 752 .write_raw = &ad9523_write_raw, 753 .debugfs_reg_access = &ad9523_reg_access, 754 .attrs = &ad9523_attribute_group, 755 }; 756 ad9523_setup(struct iio_dev * indio_dev)757 static int ad9523_setup(struct iio_dev *indio_dev) 758 { 759 struct ad9523_state *st = iio_priv(indio_dev); 760 struct ad9523_platform_data *pdata = st->pdata; 761 struct ad9523_channel_spec *chan; 762 unsigned long active_mask = 0; 763 int ret, i; 764 765 ret = ad9523_write(indio_dev, AD9523_SERIAL_PORT_CONFIG, 766 AD9523_SER_CONF_SOFT_RESET | 767 (st->spi->mode & SPI_3WIRE ? 0 : 768 AD9523_SER_CONF_SDO_ACTIVE)); 769 if (ret < 0) 770 return ret; 771 772 ret = ad9523_write(indio_dev, AD9523_READBACK_CTRL, 773 AD9523_READBACK_CTRL_READ_BUFFERED); 774 if (ret < 0) 775 return ret; 776 777 ret = ad9523_io_update(indio_dev); 778 if (ret < 0) 779 return ret; 780 781 /* 782 * PLL1 Setup 783 */ 784 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_A_DIVIDER, 785 pdata->refa_r_div); 786 if (ret < 0) 787 return ret; 788 789 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_B_DIVIDER, 790 pdata->refb_r_div); 791 if (ret < 0) 792 return ret; 793 794 ret = ad9523_write(indio_dev, AD9523_PLL1_FEEDBACK_DIVIDER, 795 pdata->pll1_feedback_div); 796 if (ret < 0) 797 return ret; 798 799 ret = ad9523_write(indio_dev, AD9523_PLL1_CHARGE_PUMP_CTRL, 800 AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(pdata-> 801 pll1_charge_pump_current_nA) | 802 AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL | 803 AD9523_PLL1_BACKLASH_PW_MIN); 804 if (ret < 0) 805 return ret; 806 807 ret = ad9523_write(indio_dev, AD9523_PLL1_INPUT_RECEIVERS_CTRL, 808 AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_RCV_EN) | 809 AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_RCV_EN) | 810 AD_IF(osc_in_diff_en, AD9523_PLL1_OSC_IN_DIFF_EN) | 811 AD_IF(osc_in_cmos_neg_inp_en, 812 AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN) | 813 AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_DIFF_RCV_EN) | 814 AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_DIFF_RCV_EN)); 815 if (ret < 0) 816 return ret; 817 818 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_CTRL, 819 AD_IF(zd_in_diff_en, AD9523_PLL1_ZD_IN_DIFF_EN) | 820 AD_IF(zd_in_cmos_neg_inp_en, 821 AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN) | 822 AD_IF(zero_delay_mode_internal_en, 823 AD9523_PLL1_ZERO_DELAY_MODE_INT) | 824 AD_IF(osc_in_feedback_en, AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN) | 825 AD_IF(refa_cmos_neg_inp_en, AD9523_PLL1_REFA_CMOS_NEG_INP_EN) | 826 AD_IF(refb_cmos_neg_inp_en, AD9523_PLL1_REFB_CMOS_NEG_INP_EN)); 827 if (ret < 0) 828 return ret; 829 830 ret = ad9523_write(indio_dev, AD9523_PLL1_MISC_CTRL, 831 AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN | 832 AD9523_PLL1_REF_MODE(pdata->ref_mode)); 833 if (ret < 0) 834 return ret; 835 836 ret = ad9523_write(indio_dev, AD9523_PLL1_LOOP_FILTER_CTRL, 837 AD9523_PLL1_LOOP_FILTER_RZERO(pdata->pll1_loop_filter_rzero)); 838 if (ret < 0) 839 return ret; 840 /* 841 * PLL2 Setup 842 */ 843 844 ret = ad9523_write(indio_dev, AD9523_PLL2_CHARGE_PUMP, 845 AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(pdata-> 846 pll2_charge_pump_current_nA)); 847 if (ret < 0) 848 return ret; 849 850 ret = ad9523_write(indio_dev, AD9523_PLL2_FEEDBACK_DIVIDER_AB, 851 AD9523_PLL2_FB_NDIV_A_CNT(pdata->pll2_ndiv_a_cnt) | 852 AD9523_PLL2_FB_NDIV_B_CNT(pdata->pll2_ndiv_b_cnt)); 853 if (ret < 0) 854 return ret; 855 856 ret = ad9523_write(indio_dev, AD9523_PLL2_CTRL, 857 AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL | 858 AD9523_PLL2_BACKLASH_CTRL_EN | 859 AD_IF(pll2_freq_doubler_en, AD9523_PLL2_FREQ_DOUBLER_EN)); 860 if (ret < 0) 861 return ret; 862 863 st->vco_freq = div_u64((unsigned long long)pdata->vcxo_freq * 864 (pdata->pll2_freq_doubler_en ? 2 : 1) * 865 AD9523_PLL2_FB_NDIV(pdata->pll2_ndiv_a_cnt, 866 pdata->pll2_ndiv_b_cnt), 867 pdata->pll2_r2_div); 868 869 ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL, 870 AD9523_PLL2_VCO_CALIBRATE); 871 if (ret < 0) 872 return ret; 873 874 ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER, 875 AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_div_m1) | 876 AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_div_m2) | 877 AD_IFE(pll2_vco_div_m1, 0, 878 AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) | 879 AD_IFE(pll2_vco_div_m2, 0, 880 AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN)); 881 if (ret < 0) 882 return ret; 883 884 if (pdata->pll2_vco_div_m1) 885 st->vco_out_freq[AD9523_VCO1] = 886 st->vco_freq / pdata->pll2_vco_div_m1; 887 888 if (pdata->pll2_vco_div_m2) 889 st->vco_out_freq[AD9523_VCO2] = 890 st->vco_freq / pdata->pll2_vco_div_m2; 891 892 st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq; 893 894 ret = ad9523_write(indio_dev, AD9523_PLL2_R2_DIVIDER, 895 AD9523_PLL2_R2_DIVIDER_VAL(pdata->pll2_r2_div)); 896 if (ret < 0) 897 return ret; 898 899 ret = ad9523_write(indio_dev, AD9523_PLL2_LOOP_FILTER_CTRL, 900 AD9523_PLL2_LOOP_FILTER_CPOLE1(pdata->cpole1) | 901 AD9523_PLL2_LOOP_FILTER_RZERO(pdata->rzero) | 902 AD9523_PLL2_LOOP_FILTER_RPOLE2(pdata->rpole2) | 903 AD_IF(rzero_bypass_en, 904 AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN)); 905 if (ret < 0) 906 return ret; 907 908 for (i = 0; i < pdata->num_channels; i++) { 909 chan = &pdata->channels[i]; 910 if (chan->channel_num < AD9523_NUM_CHAN) { 911 __set_bit(chan->channel_num, &active_mask); 912 ret = ad9523_write(indio_dev, 913 AD9523_CHANNEL_CLOCK_DIST(chan->channel_num), 914 AD9523_CLK_DIST_DRIVER_MODE(chan->driver_mode) | 915 AD9523_CLK_DIST_DIV(chan->channel_divider) | 916 AD9523_CLK_DIST_DIV_PHASE(chan->divider_phase) | 917 (chan->sync_ignore_en ? 918 AD9523_CLK_DIST_IGNORE_SYNC_EN : 0) | 919 (chan->divider_output_invert_en ? 920 AD9523_CLK_DIST_INV_DIV_OUTPUT_EN : 0) | 921 (chan->low_power_mode_en ? 922 AD9523_CLK_DIST_LOW_PWR_MODE_EN : 0) | 923 (chan->output_dis ? 924 AD9523_CLK_DIST_PWR_DOWN_EN : 0)); 925 if (ret < 0) 926 return ret; 927 928 ret = ad9523_vco_out_map(indio_dev, chan->channel_num, 929 chan->use_alt_clock_src); 930 if (ret < 0) 931 return ret; 932 933 st->ad9523_channels[i].type = IIO_ALTVOLTAGE; 934 st->ad9523_channels[i].output = 1; 935 st->ad9523_channels[i].indexed = 1; 936 st->ad9523_channels[i].channel = chan->channel_num; 937 st->ad9523_channels[i].extend_name = 938 chan->extended_name; 939 st->ad9523_channels[i].info_mask_separate = 940 BIT(IIO_CHAN_INFO_RAW) | 941 BIT(IIO_CHAN_INFO_PHASE) | 942 BIT(IIO_CHAN_INFO_FREQUENCY); 943 } 944 } 945 946 for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) { 947 ret = ad9523_write(indio_dev, 948 AD9523_CHANNEL_CLOCK_DIST(i), 949 AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) | 950 AD9523_CLK_DIST_PWR_DOWN_EN); 951 if (ret < 0) 952 return ret; 953 } 954 955 ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0); 956 if (ret < 0) 957 return ret; 958 959 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, 960 AD9523_STATUS_MONITOR_01_PLL12_LOCKED); 961 if (ret < 0) 962 return ret; 963 964 ret = ad9523_io_update(indio_dev); 965 if (ret < 0) 966 return ret; 967 968 return 0; 969 } 970 ad9523_probe(struct spi_device * spi)971 static int ad9523_probe(struct spi_device *spi) 972 { 973 struct ad9523_platform_data *pdata = spi->dev.platform_data; 974 struct iio_dev *indio_dev; 975 struct ad9523_state *st; 976 int ret; 977 978 if (!pdata) { 979 dev_err(&spi->dev, "no platform data?\n"); 980 return -EINVAL; 981 } 982 983 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 984 if (indio_dev == NULL) 985 return -ENOMEM; 986 987 st = iio_priv(indio_dev); 988 989 mutex_init(&st->lock); 990 991 ret = devm_regulator_get_enable(&spi->dev, "vcc"); 992 if (ret) 993 return ret; 994 995 st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", 996 GPIOD_OUT_HIGH); 997 if (IS_ERR(st->pwrdown_gpio)) 998 return PTR_ERR(st->pwrdown_gpio); 999 1000 st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", 1001 GPIOD_OUT_LOW); 1002 if (IS_ERR(st->reset_gpio)) 1003 return PTR_ERR(st->reset_gpio); 1004 1005 if (st->reset_gpio) { 1006 udelay(1); 1007 gpiod_direction_output(st->reset_gpio, 1); 1008 } 1009 1010 st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync", 1011 GPIOD_OUT_HIGH); 1012 if (IS_ERR(st->sync_gpio)) 1013 return PTR_ERR(st->sync_gpio); 1014 1015 spi_set_drvdata(spi, indio_dev); 1016 st->spi = spi; 1017 st->pdata = pdata; 1018 1019 indio_dev->name = (pdata->name[0] != 0) ? pdata->name : 1020 spi_get_device_id(spi)->name; 1021 indio_dev->info = &ad9523_info; 1022 indio_dev->modes = INDIO_DIRECT_MODE; 1023 indio_dev->channels = st->ad9523_channels; 1024 indio_dev->num_channels = pdata->num_channels; 1025 1026 ret = ad9523_setup(indio_dev); 1027 if (ret < 0) 1028 return ret; 1029 1030 return devm_iio_device_register(&spi->dev, indio_dev); 1031 } 1032 1033 static const struct spi_device_id ad9523_id[] = { 1034 {"ad9523-1", 9523}, 1035 {} 1036 }; 1037 MODULE_DEVICE_TABLE(spi, ad9523_id); 1038 1039 static struct spi_driver ad9523_driver = { 1040 .driver = { 1041 .name = "ad9523", 1042 }, 1043 .probe = ad9523_probe, 1044 .id_table = ad9523_id, 1045 }; 1046 module_spi_driver(ad9523_driver); 1047 1048 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 1049 MODULE_DESCRIPTION("Analog Devices AD9523 CLOCKDIST/PLL"); 1050 MODULE_LICENSE("GPL v2"); 1051