menu "Library routines" config BCH bool "Enable Software based BCH ECC" help Enables software based BCH ECC algorithm present in lib/bch.c This is used by SoC platforms which do not have built-in ELM hardware engine required for BCH ECC correction. config CC_OPTIMIZE_LIBS_FOR_SPEED bool "Optimize libraries for speed" help Enabling this option will pass "-O2" to gcc when compiling under "lib" directory. If unsure, say N. config HAVE_PRIVATE_LIBGCC bool config USE_PRIVATE_LIBGCC bool "Use private libgcc" depends on HAVE_PRIVATE_LIBGCC default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS) help This option allows you to use the built-in libgcc implementation of U-Boot instead of the one provided by the compiler. If unsure, say N. config SYS_HZ int default 1000 help The frequency of the timer returned by get_timer(). get_timer() must operate in milliseconds and this option must be set to 1000. config USE_TINY_PRINTF bool "Enable tiny printf() version" help This option enables a tiny, stripped down printf version. This should only be used in space limited environments, like SPL versions with hard memory limits. This version reduces the code size by about 2.5KiB on armv7. The supported format specifiers are %c, %s, %u/%d and %x. config REGEX bool "Enable regular expression support" default y if NET help If this variable is defined, U-Boot is linked against the SLRE (Super Light Regular Expression) library, which adds regex support to some commands, for example "env grep" and "setexpr". config LIB_RAND bool "Pseudo-random library support " help This library provides pseudo-random number generator functions. config SPL_TINY_MEMSET bool "Use a very small memset() in SPL" help The faster memset() is the arch-specific one (if available) enabled by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get better performance by writing a word at a time. But in very size-constrained envrionments even this may be too big. Enable this option to reduce code size slightly at the cost of some speed. config TPL_TINY_MEMSET bool "Use a very small memset() in TPL" help The faster memset() is the arch-specific one (if available) enabled by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get better performance by writing a word at a time. But in very size-constrained envrionments even this may be too big. Enable this option to reduce code size slightly at the cost of some speed. config RBTREE bool source lib/dhry/Kconfig menu "Security support" config AES bool "Support the AES algorithm" help This provides a means to encrypt and decrypt data using the AES (Advanced Encryption Standard). This algorithm uses a symetric key and is widely used as a streaming cipher. Different key lengths are supported by the algorithm but only a 128-bit key is supported at present. source lib/rsa/Kconfig config TPM bool "Trusted Platform Module (TPM) Support" depends on DM help This enables support for TPMs which can be used to provide security features for your board. The TPM can be connected via LPC or I2C and a sandbox TPM is provided for testing purposes. Use the 'tpm' command to interactive the TPM. Driver model support is provided for the low-level TPM interface, but only one TPM is supported at a time by the TPM library. endmenu menu "Hashing Support" config SHA1 bool "Enable SHA1 support" help This option enables support of hashing using SHA1 algorithm. The hash is calculated in software. The SHA1 algorithm produces a 160-bit (20-byte) hash value (digest). config SHA256 bool "Enable SHA256 support" help This option enables support of hashing using SHA256 algorithm. The hash is calculated in software. The SHA256 algorithm produces a 256-bit (32-byte) hash value (digest). config SHA_HW_ACCEL bool "Enable hashing using hardware" help This option enables hardware acceleration for SHA1/SHA256 hashing. This affects the 'hash' command and also the hash_lookup_algo() function. config SHA_PROG_HW_ACCEL bool "Enable Progressive hashing support using hardware" depends on SHA_HW_ACCEL help This option enables hardware-acceleration for SHA1/SHA256 progressive hashing. Data can be streamed in a block at a time and the hashing is performed in hardware. config MD5 bool endmenu menu "Compression Support" config LZ4 bool "Enable LZ4 decompression support" help If this option is set, support for LZ4 compressed images is included. The LZ4 algorithm can run in-place as long as the compressed image is loaded to the end of the output buffer, and trades lower compression ratios for much faster decompression. NOTE: This implements the release version of the LZ4 frame format as generated by default by the 'lz4' command line tool. This is not the same as the outdated, less efficient legacy frame format currently (2015) implemented in the Linux kernel (generated by 'lz4 -l'). The two formats are incompatible. config LZMA bool "Enable LZMA decompression support" help This enables support for LZMA (Lempel-Ziv-Markov chain algorithm), a dictionary compression algorithm that provides a high compression ratio and fairly fast decompression speed. See also CONFIG_CMD_LZMADEC which provides a decode command. config LZO bool "Enable LZO decompression support" help This enables support for LZO compression algorithm.r config SPL_GZIP bool "Enable gzip decompression support for SPL build" select SPL_ZLIB help This enables support for GZIP compression altorithm for SPL boot. config SPL_ZLIB bool help This enables compression lib for SPL boot. endmenu config ERRNO_STR bool "Enable function for getting errno-related string message" help The function errno_str(int errno), returns a pointer to the errno corresponding text message: - if errno is null or positive number - a pointer to "Success" message - if errno is negative - a pointer to errno related message config OF_LIBFDT bool "Enable the FDT library" default y if OF_CONTROL help This enables the FDT library (libfdt). It provides functions for accessing binary device tree images in memory, such as adding and removing nodes and properties, scanning through the tree and finding particular compatible nodes. The library operates on a flattened version of the device tree. config OF_LIBFDT_OVERLAY bool "Enable the FDT library overlay support" help This enables the FDT library (libfdt) overlay support. config SPL_OF_LIBFDT bool "Enable the FDT library for SPL" default y if SPL_OF_CONTROL help This enables the FDT library (libfdt). It provides functions for accessing binary device tree images in memory, such as adding and removing nodes and properties, scanning through the tree and finding particular compatible nodes. The library operates on a flattened version of the device tree. config FDT_FIXUP_PARTITIONS bool "overwrite MTD partitions in DTS through defined in 'mtdparts'" depends on OF_LIBFDT default n help Allow overwriting defined partitions in the device tree blob using partition info defined in the 'mtdparts' environment variable. menu "System tables" depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER) config GENERATE_SMBIOS_TABLE bool "Generate an SMBIOS (System Management BIOS) table" default y depends on X86 || EFI_LOADER help The System Management BIOS (SMBIOS) specification addresses how motherboard and system vendors present management information about their products in a standard format by extending the BIOS interface on Intel architecture systems. Check http://www.dmtf.org/standards/smbios for details. config SMBIOS_MANUFACTURER string "SMBIOS Manufacturer" depends on GENERATE_SMBIOS_TABLE default SYS_VENDOR help The board manufacturer to store in SMBIOS structures. Change this to override the default one (CONFIG_SYS_VENDOR). config SMBIOS_PRODUCT_NAME string "SMBIOS Product Name" depends on GENERATE_SMBIOS_TABLE default SYS_BOARD help The product name to store in SMBIOS structures. Change this to override the default one (CONFIG_SYS_BOARD). endmenu source lib/efi/Kconfig source lib/efi_loader/Kconfig endmenu