/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2011, Marvell Semiconductor Inc. * Lei Wen * * Back ported to the 8xx platform (from the 8260 platform) by * Murray.Jensen@cmst.csiro.au, 27-Jan-01. */ #ifndef __SDHCI_HW_H #define __SDHCI_HW_H #include #include #include /* * Controller registers */ #define SDHCI_DMA_ADDRESS 0x00 #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) #define SDHCI_BLOCK_COUNT 0x06 #define SDHCI_ARGUMENT 0x08 #define SDHCI_TRANSFER_MODE 0x0C #define SDHCI_TRNS_DMA BIT(0) #define SDHCI_TRNS_BLK_CNT_EN BIT(1) #define SDHCI_TRNS_ACMD12 BIT(2) #define SDHCI_TRNS_READ BIT(4) #define SDHCI_TRNS_MULTI BIT(5) #define SDHCI_COMMAND 0x0E #define SDHCI_CMD_RESP_MASK 0x03 #define SDHCI_CMD_CRC 0x08 #define SDHCI_CMD_INDEX 0x10 #define SDHCI_CMD_DATA 0x20 #define SDHCI_CMD_ABORTCMD 0xC0 #define SDHCI_CMD_RESP_NONE 0x00 #define SDHCI_CMD_RESP_LONG 0x01 #define SDHCI_CMD_RESP_SHORT 0x02 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) #define SDHCI_RESPONSE 0x10 #define SDHCI_BUFFER 0x20 #define SDHCI_PRESENT_STATE 0x24 #define SDHCI_CMD_INHIBIT BIT(0) #define SDHCI_DATA_INHIBIT BIT(1) #define SDHCI_DOING_WRITE BIT(8) #define SDHCI_DOING_READ BIT(9) #define SDHCI_SPACE_AVAILABLE BIT(10) #define SDHCI_DATA_AVAILABLE BIT(11) #define SDHCI_CARD_PRESENT BIT(16) #define SDHCI_CARD_STATE_STABLE BIT(17) #define SDHCI_CARD_DETECT_PIN_LEVEL BIT(18) #define SDHCI_WRITE_PROTECT BIT(19) #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED BIT(0) #define SDHCI_CTRL_4BITBUS BIT(1) #define SDHCI_CTRL_HISPD BIT(2) #define SDHCI_CTRL_DMA_MASK 0x18 #define SDHCI_CTRL_SDMA 0x00 #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 #define SDHCI_CTRL_8BITBUS BIT(5) #define SDHCI_CTRL_CD_TEST_INS BIT(6) #define SDHCI_CTRL_CD_TEST BIT(7) #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 #define SDHCI_POWER_180 0x0A #define SDHCI_POWER_300 0x0C #define SDHCI_POWER_330 0x0E #define SDHCI_BLOCK_GAP_CONTROL 0x2A #define SDHCI_WAKE_UP_CONTROL 0x2B #define SDHCI_WAKE_ON_INT BIT(0) #define SDHCI_WAKE_ON_INSERT BIT(1) #define SDHCI_WAKE_ON_REMOVE BIT(2) #define SDHCI_CLOCK_CONTROL 0x2C #define SDHCI_DIVIDER_SHIFT 8 #define SDHCI_DIVIDER_HI_SHIFT 6 #define SDHCI_DIV_MASK 0xFF #define SDHCI_DIV_MASK_LEN 8 #define SDHCI_DIV_HI_MASK 0x300 #define SDHCI_PROG_CLOCK_MODE BIT(5) #define SDHCI_CLOCK_CARD_EN BIT(2) #define SDHCI_CLOCK_INT_STABLE BIT(1) #define SDHCI_CLOCK_INT_EN BIT(0) #define SDHCI_TIMEOUT_CONTROL 0x2E #define SDHCI_SOFTWARE_RESET 0x2F #define SDHCI_RESET_ALL 0x01 #define SDHCI_RESET_CMD 0x02 #define SDHCI_RESET_DATA 0x04 #define SDHCI_INT_STATUS 0x30 #define SDHCI_INT_ENABLE 0x34 #define SDHCI_SIGNAL_ENABLE 0x38 #define SDHCI_INT_RESPONSE BIT(0) #define SDHCI_INT_DATA_END BIT(1) #define SDHCI_INT_DMA_END BIT(3) #define SDHCI_INT_SPACE_AVAIL BIT(4) #define SDHCI_INT_DATA_AVAIL BIT(5) #define SDHCI_INT_CARD_INSERT BIT(6) #define SDHCI_INT_CARD_REMOVE BIT(7) #define SDHCI_INT_CARD_INT BIT(8) #define SDHCI_INT_ERROR BIT(15) #define SDHCI_INT_TIMEOUT BIT(16) #define SDHCI_INT_CRC BIT(17) #define SDHCI_INT_END_BIT BIT(18) #define SDHCI_INT_INDEX BIT(19) #define SDHCI_INT_DATA_TIMEOUT BIT(20) #define SDHCI_INT_DATA_CRC BIT(21) #define SDHCI_INT_DATA_END_BIT BIT(22) #define SDHCI_INT_BUS_POWER BIT(23) #define SDHCI_INT_ACMD12ERR BIT(24) #define SDHCI_INT_ADMA_ERROR BIT(25) #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C /* 3E-3F reserved */ #define SDHCI_CAPABILITIES 0x40 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F #define SDHCI_TIMEOUT_CLK_SHIFT 0 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 #define SDHCI_CAN_DO_8BIT BIT(18) #define SDHCI_CAN_DO_ADMA2 BIT(19) #define SDHCI_CAN_DO_ADMA1 BIT(20) #define SDHCI_CAN_DO_HISPD BIT(21) #define SDHCI_CAN_DO_SDMA BIT(22) #define SDHCI_CAN_VDD_330 BIT(24) #define SDHCI_CAN_VDD_300 BIT(25) #define SDHCI_CAN_VDD_180 BIT(26) #define SDHCI_CAN_64BIT BIT(28) #define SDHCI_CAPABILITIES_1 0x44 #define SDHCI_SUPPORT_SDR50 0x00000001 #define SDHCI_SUPPORT_SDR104 0x00000002 #define SDHCI_SUPPORT_DDR50 0x00000004 #define SDHCI_USE_SDR50_TUNING 0x00002000 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 #define SDHCI_CLOCK_MUL_SHIFT 16 #define SDHCI_MAX_CURRENT 0x48 /* 4C-4F reserved for more max current */ #define SDHCI_SET_ACMD12_ERROR 0x50 #define SDHCI_SET_INT_ERROR 0x52 #define SDHCI_ADMA_ERROR 0x54 /* 55-57 reserved */ #define SDHCI_ADMA_ADDRESS 0x58 /* 60-FB reserved */ #define SDHCI_SLOT_INT_STATUS 0xFC #define SDHCI_HOST_VERSION 0xFE #define SDHCI_VENDOR_VER_MASK 0xFF00 #define SDHCI_VENDOR_VER_SHIFT 8 #define SDHCI_SPEC_VER_MASK 0x00FF #define SDHCI_SPEC_VER_SHIFT 0 #define SDHCI_SPEC_100 0 #define SDHCI_SPEC_200 1 #define SDHCI_SPEC_300 2 #define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK) /* * End of controller registers. */ #define SDHCI_MAX_DIV_SPEC_200 256 #define SDHCI_MAX_DIV_SPEC_300 2046 /* * quirks */ #define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0) #define SDHCI_QUIRK_REG32_RW (1 << 1) #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) /* * SDHCI_QUIRK_BROKEN_HISPD_MODE * the hardware cannot operate correctly in high-speed mode, * this quirk forces the sdhci host-controller to non high-speed mode */ #define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5) #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) #define SDHCI_QUIRK_NO_1_8_V (1 << 9) /* to make gcc happy */ struct sdhci_host; /* * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. */ #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) #define SDHCI_DEFAULT_BOUNDARY_ARG (7) struct sdhci_ops { #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS u32 (*read_l)(struct sdhci_host *host, int reg); u16 (*read_w)(struct sdhci_host *host, int reg); u8 (*read_b)(struct sdhci_host *host, int reg); void (*write_l)(struct sdhci_host *host, u32 val, int reg); void (*write_w)(struct sdhci_host *host, u16 val, int reg); void (*write_b)(struct sdhci_host *host, u8 val, int reg); #endif int (*get_cd)(struct sdhci_host *host); void (*set_control_reg)(struct sdhci_host *host); void (*set_ios_post)(struct sdhci_host *host); void (*set_clock)(struct sdhci_host *host, u32 div); int (*platform_execute_tuning)(struct mmc *host, u8 opcode); void (*set_delay)(struct sdhci_host *host); }; struct sdhci_host { const char *name; void *ioaddr; unsigned int quirks; unsigned int host_caps; unsigned int version; unsigned int max_clk; /* Maximum Base Clock frequency */ unsigned int clk_mul; /* Clock Multiplier value */ unsigned int clock; struct mmc *mmc; const struct sdhci_ops *ops; int index; int bus_width; struct gpio_desc pwr_gpio; /* Power GPIO */ struct gpio_desc pwr_sw_gpio; /* Power switch GPIO */ struct gpio_desc cd_gpio; /* Card Detect GPIO */ uint voltages; struct mmc_config cfg; }; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) { if (unlikely(host->ops->write_l)) host->ops->write_l(host, val, reg); else writel(val, host->ioaddr + reg); } static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) { if (unlikely(host->ops->write_w)) host->ops->write_w(host, val, reg); else writew(val, host->ioaddr + reg); } static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) { if (unlikely(host->ops->write_b)) host->ops->write_b(host, val, reg); else writeb(val, host->ioaddr + reg); } static inline u32 sdhci_readl(struct sdhci_host *host, int reg) { if (unlikely(host->ops->read_l)) return host->ops->read_l(host, reg); else return readl(host->ioaddr + reg); } static inline u16 sdhci_readw(struct sdhci_host *host, int reg) { if (unlikely(host->ops->read_w)) return host->ops->read_w(host, reg); else return readw(host->ioaddr + reg); } static inline u8 sdhci_readb(struct sdhci_host *host, int reg) { if (unlikely(host->ops->read_b)) return host->ops->read_b(host, reg); else return readb(host->ioaddr + reg); } #else static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) { writel(val, host->ioaddr + reg); } static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) { writew(val, host->ioaddr + reg); } static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) { writeb(val, host->ioaddr + reg); } static inline u32 sdhci_readl(struct sdhci_host *host, int reg) { return readl(host->ioaddr + reg); } static inline u16 sdhci_readw(struct sdhci_host *host, int reg) { return readw(host->ioaddr + reg); } static inline u8 sdhci_readb(struct sdhci_host *host, int reg) { return readb(host->ioaddr + reg); } #endif #ifdef CONFIG_BLK /** * sdhci_setup_cfg() - Set up the configuration for DWMMC * * This is used to set up an SDHCI device when you are using CONFIG_BLK. * * This should be called from your MMC driver's probe() method once you have * the information required. * * Generally your driver will have a platform data structure which holds both * the configuration (struct mmc_config) and the MMC device info (struct mmc). * For example: * * struct msm_sdhc_plat { * struct mmc_config cfg; * struct mmc mmc; * }; * * ... * * Inside U_BOOT_DRIVER(): * .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat), * * To access platform data: * struct msm_sdhc_plat *plat = dev_get_platdata(dev); * * See msm_sdhci.c for an example. * * @cfg: Configuration structure to fill in (generally &plat->mmc) * @host: SDHCI host structure * @f_max: Maximum supported clock frequency in HZ (0 for default) * @f_min: Minimum supported clock frequency in HZ (0 for default) */ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, u32 f_max, u32 f_min); /** * sdhci_bind() - Set up a new MMC block device * * This is used to set up an SDHCI block device when you are using CONFIG_BLK. * It should be called from your driver's bind() method. * * See msm_sdhci.c for an example. * * @dev: Device to set up * @mmc: Pointer to mmc structure (normally &plat->mmc) * @cfg: Empty configuration structure (generally &plat->cfg). This is * normally all zeroes at this point. The only purpose of passing * this in is to set mmc->cfg to it. * @return 0 if OK, -ve if the block device could not be created */ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); #else /** * add_sdhci() - Add a new SDHCI interface * * This is used when you are not using CONFIG_BLK. Convert your driver over! * * @host: SDHCI host structure * @f_max: Maximum supported clock frequency in HZ (0 for default) * @f_min: Minimum supported clock frequency in HZ (0 for default) * @return 0 if OK, -ve on error */ int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min); #endif /* !CONFIG_BLK */ #ifdef CONFIG_DM_MMC /* Export the operations to drivers */ int sdhci_probe(struct udevice *dev); extern const struct dm_mmc_ops sdhci_ops; #else #endif #endif /* __SDHCI_HW_H */