/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R <r.sricharan@ti.com> * * Configuration settings for the TI EVM5430 board. * See ti_omap5_common.h for omap5 common settings. */ #ifndef __CONFIG_OMAP5_EVM_H #define __CONFIG_OMAP5_EVM_H #include <environment/ti/dfu.h> #ifndef CONFIG_SPL_BUILD /* Define the default GPT table for eMMC */ #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" #endif #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ DFU_ALT_INFO_MMC \ DFU_ALT_INFO_EMMC \ DFU_ALT_INFO_RAM #include <configs/ti_omap5_common.h> #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* MMC ENV related defines */ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ #define CONFIG_ENV_SIZE (128 << 10) #define CONFIG_ENV_OFFSET 0x260000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT #define CONFIG_SUPPORT_EMMC_BOOT /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 /* USB UHH support options */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 /* Enabled commands */ /* USB Networking options */ #define CONSOLEDEV "ttyO2" #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) #endif /* __CONFIG_OMAP5_EVM_H */