/* SPDX-License-Identifier: GPL-2.0+ */ /* * Configuration header file for K3 AM654 EVM * * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ * Lokesh Vutla */ #ifndef __CONFIG_AM654_EVM_H #define __CONFIG_AM654_EVM_H #include #include #include #define CONFIG_ENV_SIZE (128 << 10) /* DDR Configuration */ #define CONFIG_SYS_SDRAM_BASE1 0x880000000 /* SPL Loader Configuration */ #ifdef CONFIG_TARGET_AM654_A53_EVM #define CONFIG_SPL_TEXT_BASE 0x80080000 #else #define CONFIG_SPL_TEXT_BASE 0x41c00000 #endif #ifdef CONFIG_SYS_K3_SPL_ATF #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" #endif #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4) /* U-Boot general configuration */ #define EXTRA_ENV_AM65X_BOARD_SETTINGS \ "findfdt=" \ "if test $board_name = am65x; then " \ "setenv name_fdt k3-am654-base-board.dtb; " \ "else if test $name_fdt = undefined; then " \ "echo WARNING: Could not determine device tree to use;"\ "fi; fi; " \ "setenv fdtfile ${name_fdt}\0" \ "loadaddr=0x80080000\0" \ "fdtaddr=0x82000000\0" \ "name_kern=Image\0" \ "console=ttyS2,115200n8\0" \ "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \ "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" /* U-Boot MMC-specific configuration */ #define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \ "boot=mmc\0" \ "mmcdev=1\0" \ "bootpart=1:2\0" \ "bootdir=/boot\0" \ "rd_spec=-\0" \ "init_mmc=run args_all args_mmc\0" \ "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ "${bootdir}/${name_kern}\0" /* Incorporate settings into the U-Boot environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_AM65X_BOARD_SETTINGS \ EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC /* Now for the remaining common defines */ #include #endif /* __CONFIG_AM654_EVM_H */