CONFIG_ARM=y CONFIG_SYS_CONFIG_NAME="evb_ast2600a0_spl" CONFIG_SYS_DCACHE_OFF=y CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/mach-aspeed/ast2600/u-boot-spl.lds" CONFIG_ARCH_ASPEED=y CONFIG_SYS_TEXT_BASE=0x10000 CONFIG_ASPEED_AST2600=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0x1e784000 CONFIG_DEBUG_UART_CLOCK=1846154 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_DEBUG_UART=y CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_SPL_FIT=y CONFIG_SPL_FIT_PRINT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_PRE_CON_BUF_ADDR=0x10000000 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_TINY=y CONFIG_SPL_SEPARATE_BSS=y # CONFIG_SPL_CRC32_SUPPORT is not set CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ast# " CONFIG_CMD_CLK=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DEFAULT_DEVICE_TREE="ast2600a0-evb" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 CONFIG_USE_ENV_SPI_CS=y CONFIG_ENV_SPI_CS=0 CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=100000000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_DM_GPIO=y CONFIG_ASPEED_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_ASPEED=y CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_TRACE=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ASPEED=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_BROADCOM=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y CONFIG_FTGMAC100=y CONFIG_MDIO=y CONFIG_PHY=y CONFIG_PINCTRL=y CONFIG_RAM=y # CONFIG_SPECIFY_CONSOLE_INDEX is not set CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_SYSRESET=y CONFIG_TEE=y CONFIG_WDT=y