// SPDX-License-Identifier: GPL-2.0+ /* * Board init file for Dragonboard 410C * * (C) Copyright 2015 Mateusz Kulikowski */ #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* pointer to the device tree ammended by the firmware */ extern void *fw_dtb; void *board_fdt_blob_setup(void) { if (fdt_magic(fw_dtb) != FDT_MAGIC) { printf("Firmware provided invalid dtb!\n"); return NULL; } return fw_dtb; } int dram_init(void) { gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } int dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; } int board_prepare_usb(enum usb_init_type type) { static struct udevice *pmic_gpio; static struct gpio_desc hub_reset, usb_sel; int ret = 0, node; if (!pmic_gpio) { ret = uclass_get_device_by_name(UCLASS_GPIO, "pm8916_gpios@c000", &pmic_gpio); if (ret < 0) { printf("Failed to find pm8916_gpios@c000 node.\n"); return ret; } } /* Try to request gpios needed to start usb host on dragonboard */ if (!dm_gpio_is_valid(&hub_reset)) { node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio), "usb_hub_reset_pm"); if (node < 0) { printf("Failed to find usb_hub_reset_pm dt node.\n"); return node; } ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0, &hub_reset, 0); if (ret < 0) { printf("Failed to request usb_hub_reset_pm gpio.\n"); return ret; } } if (!dm_gpio_is_valid(&usb_sel)) { node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio), "usb_sw_sel_pm"); if (node < 0) { printf("Failed to find usb_sw_sel_pm dt node.\n"); return 0; } ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0, &usb_sel, 0); if (ret < 0) { printf("Failed to request usb_sw_sel_pm gpio.\n"); return ret; } } if (type == USB_INIT_HOST) { /* Start USB Hub */ dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); mdelay(100); /* Switch usb to host connectors */ dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); mdelay(100); } else { /* Device */ /* Disable hub */ dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT); /* Switch back to device connector */ dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT); } return 0; } /* Check for vol- button - if pressed - stop autoboot */ int misc_init_r(void) { struct udevice *pon; struct gpio_desc resin; int node, ret; ret = uclass_get_device_by_name(UCLASS_GPIO, "pm8916_pon@800", &pon); if (ret < 0) { printf("Failed to find PMIC pon node. Check device tree\n"); return 0; } node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pon), "key_vol_down"); if (node < 0) { printf("Failed to find key_vol_down node. Check device tree\n"); return 0; } if (gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0, &resin, 0)) { printf("Failed to request key_vol_down button.\n"); return 0; } if (dm_gpio_get_value(&resin)) { env_set("bootdelay", "-1"); printf("Power button pressed - dropping to console.\n"); } return 0; } int board_init(void) { return 0; } int ft_board_setup(void *blob, bd_t *bd) { int offset, len, i; const char *mac; struct { const char *compatible; const char *property; } fix[] = { [0] = { /* update the kernel's dtb with wlan mac */ .compatible = "qcom,wcnss-wlan", .property = "local-mac-address", }, [1] = { /* update the kernel's dtb with bt mac */ .compatible = "qcom,wcnss-bt", .property = "local-bd-address", }, }; for (i = 0; i < sizeof(fix) / sizeof(fix[0]); i++) { offset = fdt_node_offset_by_compatible(gd->fdt_blob, -1, fix[i].compatible); if (offset < 0) continue; mac = fdt_getprop(gd->fdt_blob, offset, fix[i].property, &len); if (mac) do_fixup_by_compat(blob, fix[i].compatible, fix[i].property, mac, ARP_HLEN, 1); } msm_fixup_memory(blob); return 0; } void reset_cpu(ulong addr) { psci_system_reset(); }