if ARCH_ASPEED

config SYS_ARCH
	default "arm"

config SYS_SOC
	default "aspeed"

config SYS_TEXT_BASE
	default 0x00000000

choice
	prompt "Aspeed SoC select"
	depends on ARCH_ASPEED
	default ASPEED_AST2500

config ASPEED_AST2400
        bool "Support Aspeed AST2400 SoC"
        select CPU_ARM926EJS
        help
          The Aspeed AST2400 is a ARM-based SoC with arm926ejs CPU.
          It is used as Board Management Controller on many server boards,
          which is enabled by support of LPC and eSPI peripherals.

config ASPEED_AST2500
	bool "Support Aspeed AST2500 SoC"
	select CPU_ARM1176
	select SUPPORT_SPL
	help
	  The Aspeed AST2500 is a ARM-based SoC with arm1176 CPU.
	  It is used as Board Management Controller on many server boards,
	  which is enabled by support of LPC and eSPI peripherals.

config ASPEED_AST2600
	bool "Support Aspeed AST2600 SoC"
	select CPU_V7A
	select CPU_V7_HAS_NONSEC
	select ARCH_SUPPORT_PSCI
	select SYS_ARCH_TIMER
	select SUPPORT_SPL
	select ENABLE_ARM_SOC_BOOT0_HOOK
	help
	  The Aspeed AST2600 is a ARM-based SoC with Cortex-A7 CPU.
	  It is used as Board Management Controller on many server boards,
	  which is enabled by support of LPC and eSPI peripherals.
endchoice

config ASPEED_PALLADIUM
	bool "Aspeed palladium for simulation"
	default n
	help
	  Say Y here to enable palladium build for simulation.

	  This is mainly for internal verification and investigation
	  on HW design. If not sure, say N.

config ASPEED_SSP_RERV_MEM
	hex "Reserve memory for SSP"
	default 0x0
	help
	  The size in bytes of reserve memory for ASPEED SoC SSP run.

config ASPEED_SECURE_BOOT
	bool "Support Aspeed secure boot feature"
	depends on SPL && ASPEED_AST2600
	select ENABLE_ARM_SOC_BOOT0_HOOK
	select CMD_BOOTS
	help
	  This option enables the support for secure boot.

config ASPEED_SECURE_BOOT_DEBUG
	bool "Enable debug support with secure boot"
	default y
	depends on ASPEED_SECURE_BOOT
	help
	  This option allows the bootm command use

config ASPEED_LOADERS
	bool "Aspeed custom loaders"
	depends on SPL
	default y
	help
	  Enable the custom payload loading methods used by ASPEED. This is requited to
	  use ASPEED's proprietary secure boot feature.

if ASPEED_LOADERS

config ASPEED_UBOOT_MMC_PART
	int "U-Boot eMMC partition"
	default 0
	help
	  The partition number of the U-Boot
	  image in the eMMC device. This is not
	  the user data partition number.

config ASPEED_UBOOT_SPI_BASE
	hex "U-Boot SPI base address"
	default 0x0
	help
	  The base address of the U-Boot image in
	  the memory mapped SPI space

config ASPEED_UBOOT_SPI_SIZE
	hex "U-Boot SPI size in bytes"
	default 0x0
	help
	  The size in bytes of the U-Boot image in
	  the memory mapped SPI space

config ASPEED_UBOOT_MMC_BASE
	hex "U-Boot eMMC base block"
	default 0x0
	help
	  The base block number of the U-Boot
	  image in the eMMC device

config ASPEED_UBOOT_MMC_SIZE
	hex "U-Boot eMMC size in blocks"
	default 0x0
	help
	  The size in block count of the U-Boot
	  image in the eMMC device

config ASPEED_UBOOT_UART_SIZE
	hex "U-Boot UART size in bytes"
	default 0x0
	help
	  The size of U-Boot image to be recevied
	  from UART device

config ASPEED_UBOOT_DRAM_BASE
	hex "U-Boot DRAM base address"
	default 0x0
	help
	  The DRAM address where the U-Boot image
	  will be loaded if XIP is not supported

config ASPEED_KERNEL_FIT_SPI_BASE
	hex "Kernel FIT SPI base address"
	default 0x0
	help
	  The base address of the kernel FIT image in
	  the memory mapped SPI space

config ASPEED_KERNEL_FIT_SPI_SIZE
	hex "Kernel FIT SPI size in bytes"
	default 0x0
	help
	  The size in bytes of the kernel FIT image in
	  the memory mapped SPI space

config ASPEED_KERNEL_FIT_MMC_BASE
	hex "Kernel FIT eMMC base block #"
	default 0x0
	help
	  The base block number of the kernel FIT
	  image in the eMMC device

config ASPEED_KERNEL_FIT_MMC_SIZE
	hex "Kernel FIT eMMC size in blocks"
	default 0x0
	help
	  The size in block count of the kernel FIT
	  image in the eMMC device

config ASPEED_KERNEL_FIT_DRAM_BASE
	hex "Kernel FIT DRAM base address"
	default 0x0
	help
	  The DRAM address where the Kernel FIT image
	  will be loaded if XIP is not supported

endif

source "arch/arm/mach-aspeed/ast2400/Kconfig"
source "arch/arm/mach-aspeed/ast2500/Kconfig"
source "arch/arm/mach-aspeed/ast2600/Kconfig"

endif