/* * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #include #include /* * [ NOTE 1 ]: * Data cache (L1 D$ or SL$) entire invalidate operation or data cache disable * operation may result in unexpected behavior and data loss even if we flush * data cache right before invalidation. That may happens if we store any context * on stack (like we store BLINK register on stack before function call). * BLINK register is the register where return address is automatically saved * when we do function call with instructions like 'bl'. * * There is the real example: * We may hang in the next code as we store any BLINK register on stack in * invalidate_dcache_all() function. * * void flush_dcache_all() { * __dc_entire_op(OP_FLUSH); * // Other code // * } * * void invalidate_dcache_all() { * __dc_entire_op(OP_INV); * // Other code // * } * * void foo(void) { * flush_dcache_all(); * invalidate_dcache_all(); * } * * Now let's see what really happens during that code execution: * * foo() * |->> call flush_dcache_all * [return address is saved to BLINK register] * [push BLINK] (save to stack) ![point 1] * |->> call __dc_entire_op(OP_FLUSH) * [return address is saved to BLINK register] * [flush L1 D$] * return [jump to BLINK] * <<------ * [other flush_dcache_all code] * [pop BLINK] (get from stack) * return [jump to BLINK] * <<------ * |->> call invalidate_dcache_all * [return address is saved to BLINK register] * [push BLINK] (save to stack) ![point 2] * |->> call __dc_entire_op(OP_FLUSH) * [return address is saved to BLINK register] * [invalidate L1 D$] ![point 3] * // Oops!!! * // We lose return address from invalidate_dcache_all function: * // we save it to stack and invalidate L1 D$ after that! * return [jump to BLINK] * <<------ * [other invalidate_dcache_all code] * [pop BLINK] (get from stack) * // we don't have this data in L1 dcache as we invalidated it in [point 3] * // so we get it from next memory level (for example DDR memory) * // but in the memory we have value which we save in [point 1], which * // is return address from flush_dcache_all function (instead of * // address from current invalidate_dcache_all function which we * // saved in [point 2] !) * return [jump to BLINK] * <<------ * // As BLINK points to invalidate_dcache_all, we call it again and * // loop forever. * * Fortunately we may fix that by using flush & invalidation of D$ with a single * one instruction (instead of flush and invalidation instructions pair) and * enabling force function inline with '__attribute__((always_inline))' gcc * attribute to avoid any function call (and BLINK store) between cache flush * and disable. */ /* Bit values in IC_CTRL */ #define IC_CTRL_CACHE_DISABLE BIT(0) /* Bit values in DC_CTRL */ #define DC_CTRL_CACHE_DISABLE BIT(0) #define DC_CTRL_INV_MODE_FLUSH BIT(6) #define DC_CTRL_FLUSH_STATUS BIT(8) #define CACHE_VER_NUM_MASK 0xF #define OP_INV BIT(0) #define OP_FLUSH BIT(1) #define OP_FLUSH_N_INV (OP_FLUSH | OP_INV) /* Bit val in SLC_CONTROL */ #define SLC_CTRL_DIS 0x001 #define SLC_CTRL_IM 0x040 #define SLC_CTRL_BUSY 0x100 #define SLC_CTRL_RGN_OP_INV 0x200 /* * By default that variable will fall into .bss section. * But .bss section is not relocated and so it will be initilized before * relocation but will be used after being zeroed. */ int l1_line_sz __section(".data"); bool dcache_exists __section(".data") = false; bool icache_exists __section(".data") = false; #define CACHE_LINE_MASK (~(l1_line_sz - 1)) #ifdef CONFIG_ISA_ARCV2 int slc_line_sz __section(".data"); bool slc_exists __section(".data") = false; bool ioc_exists __section(".data") = false; bool pae_exists __section(".data") = false; /* To force enable IOC set ioc_enable to 'true' */ bool ioc_enable __section(".data") = false; void read_decode_mmu_bcr(void) { /* TODO: should we compare mmu version from BCR and from CONFIG? */ #if (CONFIG_ARC_MMU_VER >= 4) union bcr_mmu_4 mmu4; mmu4.word = read_aux_reg(ARC_AUX_MMU_BCR); pae_exists = !!mmu4.fields.pae; #endif /* (CONFIG_ARC_MMU_VER >= 4) */ } static void __slc_entire_op(const int op) { unsigned int ctrl; ctrl = read_aux_reg(ARC_AUX_SLC_CTRL); if (!(op & OP_FLUSH)) /* i.e. OP_INV */ ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ else ctrl |= SLC_CTRL_IM; write_aux_reg(ARC_AUX_SLC_CTRL, ctrl); if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */ write_aux_reg(ARC_AUX_SLC_INVALIDATE, 0x1); else write_aux_reg(ARC_AUX_SLC_FLUSH, 0x1); /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ read_aux_reg(ARC_AUX_SLC_CTRL); /* Important to wait for flush to complete */ while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY); } static void slc_upper_region_init(void) { /* * ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1 are always == 0 * as we don't use PAE40. */ write_aux_reg(ARC_AUX_SLC_RGN_END1, 0); write_aux_reg(ARC_AUX_SLC_RGN_START1, 0); } static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op) { unsigned int ctrl; unsigned long end; /* * The Region Flush operation is specified by CTRL.RGN_OP[11..9] * - b'000 (default) is Flush, * - b'001 is Invalidate if CTRL.IM == 0 * - b'001 is Flush-n-Invalidate if CTRL.IM == 1 */ ctrl = read_aux_reg(ARC_AUX_SLC_CTRL); /* Don't rely on default value of IM bit */ if (!(op & OP_FLUSH)) /* i.e. OP_INV */ ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ else ctrl |= SLC_CTRL_IM; if (op & OP_INV) ctrl |= SLC_CTRL_RGN_OP_INV; /* Inv or flush-n-inv */ else ctrl &= ~SLC_CTRL_RGN_OP_INV; write_aux_reg(ARC_AUX_SLC_CTRL, ctrl); /* * Lower bits are ignored, no need to clip * END needs to be setup before START (latter triggers the operation) * END can't be same as START, so add (l2_line_sz - 1) to sz */ end = paddr + sz + slc_line_sz - 1; /* * Upper addresses (ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1) * are always == 0 as we don't use PAE40, so we only setup lower ones * (ARC_AUX_SLC_RGN_END and ARC_AUX_SLC_RGN_START) */ write_aux_reg(ARC_AUX_SLC_RGN_END, end); write_aux_reg(ARC_AUX_SLC_RGN_START, paddr); /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ read_aux_reg(ARC_AUX_SLC_CTRL); while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY); } static void arc_ioc_setup(void) { /* IOC Aperture start is equal to DDR start */ unsigned int ap_base = CONFIG_SYS_SDRAM_BASE; /* IOC Aperture size is equal to DDR size */ long ap_size = CONFIG_SYS_SDRAM_SIZE; flush_n_invalidate_dcache_all(); if (!is_power_of_2(ap_size) || ap_size < 4096) panic("IOC Aperture size must be power of 2 and bigger 4Kib"); /* * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB, * so setting 0x11 implies 512M, 0x12 implies 1G... */ write_aux_reg(ARC_AUX_IO_COH_AP0_SIZE, order_base_2(ap_size / 1024) - 2); /* IOC Aperture start must be aligned to the size of the aperture */ if (ap_base % ap_size != 0) panic("IOC Aperture start must be aligned to the size of the aperture"); write_aux_reg(ARC_AUX_IO_COH_AP0_BASE, ap_base >> 12); write_aux_reg(ARC_AUX_IO_COH_PARTIAL, 1); write_aux_reg(ARC_AUX_IO_COH_ENABLE, 1); } #endif /* CONFIG_ISA_ARCV2 */ #ifdef CONFIG_ISA_ARCV2 static void read_decode_cache_bcr_arcv2(void) { union bcr_slc_cfg slc_cfg; union bcr_clust_cfg cbcr; union bcr_generic sbcr; sbcr.word = read_aux_reg(ARC_BCR_SLC); if (sbcr.fields.ver) { slc_cfg.word = read_aux_reg(ARC_AUX_SLC_CONFIG); slc_exists = true; slc_line_sz = (slc_cfg.fields.lsz == 0) ? 128 : 64; } cbcr.word = read_aux_reg(ARC_BCR_CLUSTER); if (cbcr.fields.c && ioc_enable) ioc_exists = true; } #endif void read_decode_cache_bcr(void) { int dc_line_sz = 0, ic_line_sz = 0; union bcr_di_cache ibcr, dbcr; ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD); if (ibcr.fields.ver) { icache_exists = true; l1_line_sz = ic_line_sz = 8 << ibcr.fields.line_len; if (!ic_line_sz) panic("Instruction exists but line length is 0\n"); } dbcr.word = read_aux_reg(ARC_BCR_DC_BUILD); if (dbcr.fields.ver) { dcache_exists = true; l1_line_sz = dc_line_sz = 16 << dbcr.fields.line_len; if (!dc_line_sz) panic("Data cache exists but line length is 0\n"); } if (ic_line_sz && dc_line_sz && (ic_line_sz != dc_line_sz)) panic("Instruction and data cache line lengths differ\n"); } void cache_init(void) { read_decode_cache_bcr(); #ifdef CONFIG_ISA_ARCV2 read_decode_cache_bcr_arcv2(); if (ioc_exists) arc_ioc_setup(); read_decode_mmu_bcr(); /* * ARC_AUX_SLC_RGN_START1 and ARC_AUX_SLC_RGN_END1 register exist * only if PAE exists in current HW. So we had to check pae_exist * before using them. */ if (slc_exists && pae_exists) slc_upper_region_init(); #endif /* CONFIG_ISA_ARCV2 */ } int icache_status(void) { if (!icache_exists) return 0; if (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE) return 0; else return 1; } void icache_enable(void) { if (icache_exists) write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) & ~IC_CTRL_CACHE_DISABLE); } void icache_disable(void) { if (icache_exists) write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) | IC_CTRL_CACHE_DISABLE); } /* IC supports only invalidation */ static inline void __ic_entire_invalidate(void) { if (!icache_status()) return; /* Any write to IC_IVIC register triggers invalidation of entire I$ */ write_aux_reg(ARC_AUX_IC_IVIC, 1); /* * As per ARC HS databook (see chapter 5.3.3.2) * it is required to add 3 NOPs after each write to IC_IVIC. */ __builtin_arc_nop(); __builtin_arc_nop(); __builtin_arc_nop(); read_aux_reg(ARC_AUX_IC_CTRL); /* blocks */ } void invalidate_icache_all(void) { __ic_entire_invalidate(); #ifdef CONFIG_ISA_ARCV2 if (slc_exists) __slc_entire_op(OP_INV); #endif } int dcache_status(void) { if (!dcache_exists) return 0; if (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE) return 0; else return 1; } void dcache_enable(void) { if (!dcache_exists) return; write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) & ~(DC_CTRL_INV_MODE_FLUSH | DC_CTRL_CACHE_DISABLE)); } void dcache_disable(void) { if (!dcache_exists) return; write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) | DC_CTRL_CACHE_DISABLE); } /* Common Helper for Line Operations on D-cache */ static inline void __dcache_line_loop(unsigned long paddr, unsigned long sz, const int cacheop) { unsigned int aux_cmd; int num_lines; /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ aux_cmd = cacheop & OP_INV ? ARC_AUX_DC_IVDL : ARC_AUX_DC_FLDL; sz += paddr & ~CACHE_LINE_MASK; paddr &= CACHE_LINE_MASK; num_lines = DIV_ROUND_UP(sz, l1_line_sz); while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER == 3) write_aux_reg(ARC_AUX_DC_PTAG, paddr); #endif write_aux_reg(aux_cmd, paddr); paddr += l1_line_sz; } } static void __before_dc_op(const int op) { unsigned int ctrl; ctrl = read_aux_reg(ARC_AUX_DC_CTRL); /* IM bit implies flush-n-inv, instead of vanilla inv */ if (op == OP_INV) ctrl &= ~DC_CTRL_INV_MODE_FLUSH; else ctrl |= DC_CTRL_INV_MODE_FLUSH; write_aux_reg(ARC_AUX_DC_CTRL, ctrl); } static void __after_dc_op(const int op) { if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS); } static inline void __dc_entire_op(const int cacheop) { int aux; if (!dcache_status()) return; __before_dc_op(cacheop); if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ aux = ARC_AUX_DC_IVDC; else aux = ARC_AUX_DC_FLSH; write_aux_reg(aux, 0x1); __after_dc_op(cacheop); } static inline void __dc_line_op(unsigned long paddr, unsigned long sz, const int cacheop) { if (!dcache_status()) return; __before_dc_op(cacheop); __dcache_line_loop(paddr, sz, cacheop); __after_dc_op(cacheop); } void invalidate_dcache_range(unsigned long start, unsigned long end) { if (start >= end) return; #ifdef CONFIG_ISA_ARCV2 if (!ioc_exists) #endif __dc_line_op(start, end - start, OP_INV); #ifdef CONFIG_ISA_ARCV2 if (slc_exists && !ioc_exists) __slc_rgn_op(start, end - start, OP_INV); #endif } void flush_dcache_range(unsigned long start, unsigned long end) { if (start >= end) return; #ifdef CONFIG_ISA_ARCV2 if (!ioc_exists) #endif __dc_line_op(start, end - start, OP_FLUSH); #ifdef CONFIG_ISA_ARCV2 if (slc_exists && !ioc_exists) __slc_rgn_op(start, end - start, OP_FLUSH); #endif } void flush_cache(unsigned long start, unsigned long size) { flush_dcache_range(start, start + size); } /* * As invalidate_dcache_all() is not used in generic U-Boot code and as we * don't need it in arch/arc code alone (invalidate without flush) we implement * flush_n_invalidate_dcache_all (flush and invalidate in 1 operation) because * it's much safer. See [ NOTE 1 ] for more details. */ void flush_n_invalidate_dcache_all(void) { __dc_entire_op(OP_FLUSH_N_INV); #ifdef CONFIG_ISA_ARCV2 if (slc_exists) __slc_entire_op(OP_FLUSH_N_INV); #endif } void flush_dcache_all(void) { __dc_entire_op(OP_FLUSH); #ifdef CONFIG_ISA_ARCV2 if (slc_exists) __slc_entire_op(OP_FLUSH); #endif }