QA output created by 051 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base === Unknown option === Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt= QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: Block format 'qcow2' used by device 'ide0-hd0' doesn't support the option 'unknown_opt' === Unknown protocol option === Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt= QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt' === Invalid format === Testing: -drive file=TEST_DIR/t.qcow2,format=foo QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo' Testing: -drive file=TEST_DIR/t.qcow2,driver=foo QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo' Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format' Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format' === Device without drive === Testing: -device virtio-scsi-pci -device scsi-hd QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device scsi-hd: drive property not set === Overriding backing file === Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig -nodefaults QEMU X.Y.Z monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2) Cache mode: writeback Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1) (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files === Enable and disable lazy refcounting on the command line, plus some invalid values === Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts= QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off' Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off' === With version 2 images enabling lazy refcounts must fail === Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit === No medium === Testing: -drive if=floppy QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive if=ide,media=cdrom QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive if=scsi,media=cdrom QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive if=ide QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: Device needs media, but drive is empty QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed. Testing: -drive if=virtio QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty Testing: -drive if=scsi QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: Initialization of device lsi53c895a failed: Device needs media, but drive is empty Testing: -drive if=none,id=disk -device ide-cd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive if=none,id=disk -device ide-drive,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. Testing: -drive if=none,id=disk -device ide-hd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed. Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty === Read-only === Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: Can't use a read-only drive QEMU_PROG: Initialization of device ide-hd failed: Device initialization failed. Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed. Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit === Cache modes === Testing: -drive driver=null-co,cache=none QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive driver=null-co,cache=directsync QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive driver=null-co,cache=writeback QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive driver=null-co,cache=writethrough QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive driver=null-co,cache=unsafe QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive driver=null-co,cache=invalid_value QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file -nodefaults QEMU X.Y.Z monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2) Cache mode: writeback Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file file: TEST_DIR/t.qcow2 (file) Cache mode: writeback (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing backing: TEST_DIR/t.qcow2.base (qcow2, read-only) Cache mode: writeback, ignore flushes (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file backing-file: TEST_DIR/t.qcow2.base (file, read-only) Cache mode: writeback, ignore flushes (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file -nodefaults QEMU X.Y.Z monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2) Cache mode: writethrough Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file file: TEST_DIR/t.qcow2 (file) Cache mode: writeback (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing backing: TEST_DIR/t.qcow2.base (qcow2, read-only) Cache mode: writeback, ignore flushes (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file backing-file: TEST_DIR/t.qcow2.base (file, read-only) Cache mode: writeback, ignore flushes (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file -nodefaults QEMU X.Y.Z monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2) Cache mode: writeback, ignore flushes Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block finfo block fiinfo block filinfo block file file: TEST_DIR/t.qcow2 (file) Cache mode: writeback, ignore flushes (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backing backing: TEST_DIR/t.qcow2.base (qcow2, read-only) Cache mode: writeback, ignore flushes (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo blockinfo block info block binfo block bainfo block bacinfo block backinfo block backiinfo block backininfo block backinginfo block backing-info block backing-finfo block backing-fiinfo block backing-filinfo block backing-file backing-file: TEST_DIR/t.qcow2.base (file, read-only) Cache mode: writeback, ignore flushes (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file -nodefaults QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.cache.writeback=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file: invalid cache option === Specifying the protocol layer === Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit === Leaving out required options === Testing: -drive driver=file QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name Testing: -drive driver=nbd QEMU_PROG: -drive driver=nbd: one of path and host must be specified. Testing: -drive driver=raw QEMU_PROG: -drive driver=raw: Can't use 'raw' as a block driver for the protocol level Testing: -drive file.driver=file QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name Testing: -drive file.driver=nbd QEMU_PROG: -drive file.driver=nbd: one of path and host must be specified. Testing: -drive file.driver=raw QEMU_PROG: -drive file.driver=raw: Can't use 'raw' as a block driver for the protocol level Testing: -drive foo=bar QEMU_PROG: -drive foo=bar: Must specify either driver or file === Specifying both an option and its legacy alias === Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time === Parsing protocol from file name === Testing: -hda foo:bar QEMU_PROG: -hda foo:bar: Unknown protocol 'foo' Testing: -drive file=foo:bar QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo' Testing: -drive file.filename=foo:bar QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory Testing: -hda file:TEST_DIR/t.qcow2 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file=file:TEST_DIR/t.qcow2 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qququiquit Testing: -drive file.filename=file:TEST_DIR/t.qcow2 QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory === Snapshot mode === wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit read 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x2qemu-io drive0 "write -P 0x22qemu-io drive0 "write -P 0x22 qemu-io drive0 "write -P 0x22 0qemu-io drive0 "write -P 0x22 0 qemu-io drive0 "write -P 0x22 0 4qemu-io drive0 "write -P 0x22 0 4kqemu-io drive0 "write -P 0x22 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) qququiquit read 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 QEMU X.Y.Z monitor - type 'help' for more information (qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io dqemu-io drqemu-io driqemu-io drivqemu-io driveqemu-io drive0qemu-io drive0 qemu-io drive0 "qemu-io drive0 "wqemu-io drive0 "wrqemu-io drive0 "wriqemu-io drive0 "writqemu-io drive0 "writeqemu-io drive0 "write qemu-io drive0 "write -qemu-io drive0 "write -Pqemu-io drive0 "write -P qemu-io drive0 "write -P 0qemu-io drive0 "write -P 0xqemu-io drive0 "write -P 0x3qemu-io drive0 "write -P 0x33qemu-io drive0 "write -P 0x33 qemu-io drive0 "write -P 0x33 0qemu-io drive0 "write -P 0x33 0 qemu-io drive0 "write -P 0x33 0 4qemu-io drive0 "write -P 0x33 0 4kqemu-io drive0 "write -P 0x33 0 4k" wrote 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) (qemu) ccocomcommcommicommitcommit commit dcommit drcommit dricommit drivcommit drivecommit drive0 (qemu) qququiquit read 4096/4096 bytes at offset 0 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) *** done