# -*- Mode: Python -*- # vim: filetype=python # # This work is licensed under the terms of the GNU GPL, version 2 or later. # See the COPYING file in the top-level directory. ## # = Machines ## ## # @SysEmuTarget: # # The comprehensive enumeration of QEMU system emulation ("softmmu") # targets. Run "./configure --help" in the project root directory, and # look for the *-softmmu targets near the "--target-list" option. The # individual target constants are not documented here, for the time # being. # # @rx: since 5.0 # @avr: since 5.1 # # Notes: The resulting QMP strings can be appended to the "qemu-system-" # prefix to produce the corresponding QEMU executable name. This # is true even for "qemu-system-x86_64". # # Since: 3.0 ## { 'enum' : 'SysEmuTarget', 'data' : [ 'aarch64', 'alpha', 'arm', 'avr', 'cris', 'hppa', 'i386', 'lm32', 'm68k', 'microblaze', 'microblazeel', 'mips', 'mips64', 'mips64el', 'mipsel', 'moxie', 'nios2', 'or1k', 'ppc', 'ppc64', 'riscv32', 'riscv64', 'rx', 's390x', 'sh4', 'sh4eb', 'sparc', 'sparc64', 'tricore', 'unicore32', 'x86_64', 'xtensa', 'xtensaeb' ] } ## # @CpuInfoArch: # # An enumeration of cpu types that enable additional information during # @query-cpus and @query-cpus-fast. # # @s390: since 2.12 # # @riscv: since 2.12 # # Since: 2.6 ## { 'enum': 'CpuInfoArch', 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'riscv', 'other' ] } ## # @CpuInfo: # # Information about a virtual CPU # # @CPU: the index of the virtual CPU # # @current: this only exists for backwards compatibility and should be ignored # # @halted: true if the virtual CPU is in the halt state. Halt usually refers # to a processor specific low power mode. # # @qom_path: path to the CPU object in the QOM tree (since 2.4) # # @thread_id: ID of the underlying host thread # # @props: properties describing to which node/socket/core/thread # virtual CPU belongs to, provided if supported by board (since 2.10) # # @arch: architecture of the cpu, which determines which additional fields # will be listed (since 2.6) # # Since: 0.14.0 # # Notes: @halted is a transient state that changes frequently. By the time the # data is sent to the client, the guest may no longer be halted. ## { 'union': 'CpuInfo', 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', 'qom_path': 'str', 'thread_id': 'int', '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' }, 'discriminator': 'arch', 'data': { 'x86': 'CpuInfoX86', 'sparc': 'CpuInfoSPARC', 'ppc': 'CpuInfoPPC', 'mips': 'CpuInfoMIPS', 'tricore': 'CpuInfoTricore', 's390': 'CpuInfoS390', 'riscv': 'CpuInfoRISCV' } } ## # @CpuInfoX86: # # Additional information about a virtual i386 or x86_64 CPU # # @pc: the 64-bit instruction pointer # # Since: 2.6 ## { 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } } ## # @CpuInfoSPARC: # # Additional information about a virtual SPARC CPU # # @pc: the PC component of the instruction pointer # # @npc: the NPC component of the instruction pointer # # Since: 2.6 ## { 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } } ## # @CpuInfoPPC: # # Additional information about a virtual PPC CPU # # @nip: the instruction pointer # # Since: 2.6 ## { 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } } ## # @CpuInfoMIPS: # # Additional information about a virtual MIPS CPU # # @PC: the instruction pointer # # Since: 2.6 ## { 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } } ## # @CpuInfoTricore: # # Additional information about a virtual Tricore CPU # # @PC: the instruction pointer # # Since: 2.6 ## { 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } } ## # @CpuInfoRISCV: # # Additional information about a virtual RISCV CPU # # @pc: the instruction pointer # # Since 2.12 ## { 'struct': 'CpuInfoRISCV', 'data': { 'pc': 'int' } } ## # @CpuS390State: # # An enumeration of cpu states that can be assumed by a virtual # S390 CPU # # Since: 2.12 ## { 'enum': 'CpuS390State', 'prefix': 'S390_CPU_STATE', 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] } ## # @CpuInfoS390: # # Additional information about a virtual S390 CPU # # @cpu-state: the virtual CPU's state # # Since: 2.12 ## { 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } } ## # @query-cpus: # # Returns a list of information about each virtual CPU. # # This command causes vCPU threads to exit to userspace, which causes # a small interruption to guest CPU execution. This will have a negative # impact on realtime guests and other latency sensitive guest workloads. # # Features: # @deprecated: This command is deprecated, because it interferes with # the guest. Use 'query-cpus-fast' instead to avoid the vCPU # interruption. # # Returns: a list of @CpuInfo for each virtual CPU # # Since: 0.14.0 # # Example: # # -> { "execute": "query-cpus" } # <- { "return": [ # { # "CPU":0, # "current":true, # "halted":false, # "qom_path":"/machine/unattached/device[0]", # "arch":"x86", # "pc":3227107138, # "thread_id":3134 # }, # { # "CPU":1, # "current":false, # "halted":true, # "qom_path":"/machine/unattached/device[2]", # "arch":"x86", # "pc":7108165, # "thread_id":3135 # } # ] # } # ## { 'command': 'query-cpus', 'returns': ['CpuInfo'], 'features': [ 'deprecated' ] } ## # @CpuInfoFast: # # Information about a virtual CPU # # @cpu-index: index of the virtual CPU # # @qom-path: path to the CPU object in the QOM tree # # @thread-id: ID of the underlying host thread # # @props: properties describing to which node/socket/core/thread # virtual CPU belongs to, provided if supported by board # # @arch: base architecture of the cpu # # @target: the QEMU system emulation target, which determines which # additional fields will be listed (since 3.0) # # Features: # @deprecated: Member @arch is deprecated. Use @target instead. # # Since: 2.12 # ## { 'union' : 'CpuInfoFast', 'base' : { 'cpu-index' : 'int', 'qom-path' : 'str', 'thread-id' : 'int', '*props' : 'CpuInstanceProperties', 'arch' : { 'type': 'CpuInfoArch', 'features': [ 'deprecated' ] }, 'target' : 'SysEmuTarget' }, 'discriminator' : 'target', 'data' : { 's390x' : 'CpuInfoS390' } } ## # @query-cpus-fast: # # Returns information about all virtual CPUs. This command does not # incur a performance penalty and should be used in production # instead of query-cpus. # # Returns: list of @CpuInfoFast # # Since: 2.12 # # Example: # # -> { "execute": "query-cpus-fast" } # <- { "return": [ # { # "thread-id": 25627, # "props": { # "core-id": 0, # "thread-id": 0, # "socket-id": 0 # }, # "qom-path": "/machine/unattached/device[0]", # "arch":"x86", # "target":"x86_64", # "cpu-index": 0 # }, # { # "thread-id": 25628, # "props": { # "core-id": 0, # "thread-id": 0, # "socket-id": 1 # }, # "qom-path": "/machine/unattached/device[2]", # "arch":"x86", # "target":"x86_64", # "cpu-index": 1 # } # ] # } ## { 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] } ## # @cpu-add: # # Adds CPU with specified ID. # # @id: ID of CPU to be created, valid values [0..max_cpus) # # Features: # @deprecated: This command is deprecated. Use `device_add` instead. # See the `query-hotpluggable-cpus` command for details. # # Returns: Nothing on success # # Since: 1.5 # # Example: # # -> { "execute": "cpu-add", "arguments": { "id": 2 } } # <- { "return": {} } # ## { 'command': 'cpu-add', 'data': {'id': 'int'}, 'features': [ 'deprecated' ] } ## # @MachineInfo: # # Information describing a machine. # # @name: the name of the machine # # @alias: an alias for the machine name # # @is-default: whether the machine is default # # @cpu-max: maximum number of CPUs supported by the machine type # (since 1.5.0) # # @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0) # # @numa-mem-supported: true if '-numa node,mem' option is supported by # the machine type and false otherwise (since 4.1) # # @deprecated: if true, the machine type is deprecated and may be removed # in future versions of QEMU according to the QEMU deprecation # policy (since 4.1.0) # # @default-cpu-type: default CPU model typename if none is requested via # the -cpu argument. (since 4.2) # # Since: 1.2.0 ## { 'struct': 'MachineInfo', 'data': { 'name': 'str', '*alias': 'str', '*is-default': 'bool', 'cpu-max': 'int', 'hotpluggable-cpus': 'bool', 'numa-mem-supported': 'bool', 'deprecated': 'bool', '*default-cpu-type': 'str' } } ## # @query-machines: # # Return a list of supported machines # # Returns: a list of MachineInfo # # Since: 1.2.0 ## { 'command': 'query-machines', 'returns': ['MachineInfo'] } ## # @CurrentMachineParams: # # Information describing the running machine parameters. # # @wakeup-suspend-support: true if the machine supports wake up from # suspend # # Since: 4.0 ## { 'struct': 'CurrentMachineParams', 'data': { 'wakeup-suspend-support': 'bool'} } ## # @query-current-machine: # # Return information on the current virtual machine. # # Returns: CurrentMachineParams # # Since: 4.0 ## { 'command': 'query-current-machine', 'returns': 'CurrentMachineParams' } ## # @TargetInfo: # # Information describing the QEMU target. # # @arch: the target architecture # # Since: 1.2.0 ## { 'struct': 'TargetInfo', 'data': { 'arch': 'SysEmuTarget' } } ## # @query-target: # # Return information about the target for this QEMU # # Returns: TargetInfo # # Since: 1.2.0 ## { 'command': 'query-target', 'returns': 'TargetInfo' } ## # @NumaOptionsType: # # @node: NUMA nodes configuration # # @dist: NUMA distance configuration (since 2.10) # # @cpu: property based CPU(s) to node mapping (Since: 2.10) # # @hmat-lb: memory latency and bandwidth information (Since: 5.0) # # @hmat-cache: memory side cache information (Since: 5.0) # # Since: 2.1 ## { 'enum': 'NumaOptionsType', 'data': [ 'node', 'dist', 'cpu', 'hmat-lb', 'hmat-cache' ] } ## # @NumaOptions: # # A discriminated record of NUMA options. (for OptsVisitor) # # Since: 2.1 ## { 'union': 'NumaOptions', 'base': { 'type': 'NumaOptionsType' }, 'discriminator': 'type', 'data': { 'node': 'NumaNodeOptions', 'dist': 'NumaDistOptions', 'cpu': 'NumaCpuOptions', 'hmat-lb': 'NumaHmatLBOptions', 'hmat-cache': 'NumaHmatCacheOptions' }} ## # @NumaNodeOptions: # # Create a guest NUMA node. (for OptsVisitor) # # @nodeid: NUMA node ID (increase by 1 from 0 if omitted) # # @cpus: VCPUs belonging to this node (assign VCPUS round-robin # if omitted) # # @mem: memory size of this node; mutually exclusive with @memdev. # Equally divide total memory among nodes if both @mem and @memdev are # omitted. # # @memdev: memory backend object. If specified for one node, # it must be specified for all nodes. # # @initiator: defined in ACPI 6.3 Chapter 5.2.27.3 Table 5-145, # points to the nodeid which has the memory controller # responsible for this NUMA node. This field provides # additional information as to the initiator node that # is closest (as in directly attached) to this node, and # therefore has the best performance (since 5.0) # # Since: 2.1 ## { 'struct': 'NumaNodeOptions', 'data': { '*nodeid': 'uint16', '*cpus': ['uint16'], '*mem': 'size', '*memdev': 'str', '*initiator': 'uint16' }} ## # @NumaDistOptions: # # Set the distance between 2 NUMA nodes. # # @src: source NUMA node. # # @dst: destination NUMA node. # # @val: NUMA distance from source node to destination node. # When a node is unreachable from another node, set the distance # between them to 255. # # Since: 2.10 ## { 'struct': 'NumaDistOptions', 'data': { 'src': 'uint16', 'dst': 'uint16', 'val': 'uint8' }} ## # @X86CPURegister32: # # A X86 32-bit register # # Since: 1.5 ## { 'enum': 'X86CPURegister32', 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] } ## # @X86CPUFeatureWordInfo: # # Information about a X86 CPU feature word # # @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word # # @cpuid-input-ecx: Input ECX value for CPUID instruction for that # feature word # # @cpuid-register: Output register containing the feature bits # # @features: value of output register, containing the feature bits # # Since: 1.5 ## { 'struct': 'X86CPUFeatureWordInfo', 'data': { 'cpuid-input-eax': 'int', '*cpuid-input-ecx': 'int', 'cpuid-register': 'X86CPURegister32', 'features': 'int' } } ## # @DummyForceArrays: # # Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally # # Since: 2.5 ## { 'struct': 'DummyForceArrays', 'data': { 'unused': ['X86CPUFeatureWordInfo'] } } ## # @NumaCpuOptions: # # Option "-numa cpu" overrides default cpu to node mapping. # It accepts the same set of cpu properties as returned by # query-hotpluggable-cpus[].props, where node-id could be used to # override default node mapping. # # Since: 2.10 ## { 'struct': 'NumaCpuOptions', 'base': 'CpuInstanceProperties', 'data' : {} } ## # @HmatLBMemoryHierarchy: # # The memory hierarchy in the System Locality Latency and Bandwidth # Information Structure of HMAT (Heterogeneous Memory Attribute Table) # # For more information about @HmatLBMemoryHierarchy, see chapter # 5.2.27.4: Table 5-146: Field "Flags" of ACPI 6.3 spec. # # @memory: the structure represents the memory performance # # @first-level: first level of memory side cache # # @second-level: second level of memory side cache # # @third-level: third level of memory side cache # # Since: 5.0 ## { 'enum': 'HmatLBMemoryHierarchy', 'data': [ 'memory', 'first-level', 'second-level', 'third-level' ] } ## # @HmatLBDataType: # # Data type in the System Locality Latency and Bandwidth # Information Structure of HMAT (Heterogeneous Memory Attribute Table) # # For more information about @HmatLBDataType, see chapter # 5.2.27.4: Table 5-146: Field "Data Type" of ACPI 6.3 spec. # # @access-latency: access latency (nanoseconds) # # @read-latency: read latency (nanoseconds) # # @write-latency: write latency (nanoseconds) # # @access-bandwidth: access bandwidth (Bytes per second) # # @read-bandwidth: read bandwidth (Bytes per second) # # @write-bandwidth: write bandwidth (Bytes per second) # # Since: 5.0 ## { 'enum': 'HmatLBDataType', 'data': [ 'access-latency', 'read-latency', 'write-latency', 'access-bandwidth', 'read-bandwidth', 'write-bandwidth' ] } ## # @NumaHmatLBOptions: # # Set the system locality latency and bandwidth information # between Initiator and Target proximity Domains. # # For more information about @NumaHmatLBOptions, see chapter # 5.2.27.4: Table 5-146 of ACPI 6.3 spec. # # @initiator: the Initiator Proximity Domain. # # @target: the Target Proximity Domain. # # @hierarchy: the Memory Hierarchy. Indicates the performance # of memory or side cache. # # @data-type: presents the type of data, access/read/write # latency or hit latency. # # @latency: the value of latency from @initiator to @target # proximity domain, the latency unit is "ns(nanosecond)". # # @bandwidth: the value of bandwidth between @initiator and @target # proximity domain, the bandwidth unit is # "Bytes per second". # # Since: 5.0 ## { 'struct': 'NumaHmatLBOptions', 'data': { 'initiator': 'uint16', 'target': 'uint16', 'hierarchy': 'HmatLBMemoryHierarchy', 'data-type': 'HmatLBDataType', '*latency': 'uint64', '*bandwidth': 'size' }} ## # @HmatCacheAssociativity: # # Cache associativity in the Memory Side Cache Information Structure # of HMAT # # For more information of @HmatCacheAssociativity, see chapter # 5.2.27.5: Table 5-147 of ACPI 6.3 spec. # # @none: None (no memory side cache in this proximity domain, # or cache associativity unknown) # # @direct: Direct Mapped # # @complex: Complex Cache Indexing (implementation specific) # # Since: 5.0 ## { 'enum': 'HmatCacheAssociativity', 'data': [ 'none', 'direct', 'complex' ] } ## # @HmatCacheWritePolicy: # # Cache write policy in the Memory Side Cache Information Structure # of HMAT # # For more information of @HmatCacheWritePolicy, see chapter # 5.2.27.5: Table 5-147: Field "Cache Attributes" of ACPI 6.3 spec. # # @none: None (no memory side cache in this proximity domain, # or cache write policy unknown) # # @write-back: Write Back (WB) # # @write-through: Write Through (WT) # # Since: 5.0 ## { 'enum': 'HmatCacheWritePolicy', 'data': [ 'none', 'write-back', 'write-through' ] } ## # @NumaHmatCacheOptions: # # Set the memory side cache information for a given memory domain. # # For more information of @NumaHmatCacheOptions, see chapter # 5.2.27.5: Table 5-147: Field "Cache Attributes" of ACPI 6.3 spec. # # @node-id: the memory proximity domain to which the memory belongs. # # @size: the size of memory side cache in bytes. # # @level: the cache level described in this structure. # # @associativity: the cache associativity, # none/direct-mapped/complex(complex cache indexing). # # @policy: the write policy, none/write-back/write-through. # # @line: the cache Line size in bytes. # # Since: 5.0 ## { 'struct': 'NumaHmatCacheOptions', 'data': { 'node-id': 'uint32', 'size': 'size', 'level': 'uint8', 'associativity': 'HmatCacheAssociativity', 'policy': 'HmatCacheWritePolicy', 'line': 'uint16' }} ## # @HostMemPolicy: # # Host memory policy types # # @default: restore default policy, remove any nondefault policy # # @preferred: set the preferred host nodes for allocation # # @bind: a strict policy that restricts memory allocation to the # host nodes specified # # @interleave: memory allocations are interleaved across the set # of host nodes specified # # Since: 2.1 ## { 'enum': 'HostMemPolicy', 'data': [ 'default', 'preferred', 'bind', 'interleave' ] } ## # @Memdev: # # Information about memory backend # # @id: backend's ID if backend has 'id' property (since 2.9) # # @size: memory backend size # # @merge: enables or disables memory merge support # # @dump: includes memory backend's memory in a core dump or not # # @prealloc: enables or disables memory preallocation # # @host-nodes: host nodes for its memory policy # # @policy: memory policy of memory backend # # Since: 2.1 ## { 'struct': 'Memdev', 'data': { '*id': 'str', 'size': 'size', 'merge': 'bool', 'dump': 'bool', 'prealloc': 'bool', 'host-nodes': ['uint16'], 'policy': 'HostMemPolicy' }} ## # @query-memdev: # # Returns information for all memory backends. # # Returns: a list of @Memdev. # # Since: 2.1 # # Example: # # -> { "execute": "query-memdev" } # <- { "return": [ # { # "id": "mem1", # "size": 536870912, # "merge": false, # "dump": true, # "prealloc": false, # "host-nodes": [0, 1], # "policy": "bind" # }, # { # "size": 536870912, # "merge": false, # "dump": true, # "prealloc": true, # "host-nodes": [2, 3], # "policy": "preferred" # } # ] # } # ## { 'command': 'query-memdev', 'returns': ['Memdev'], 'allow-preconfig': true } ## # @CpuInstanceProperties: # # List of properties to be used for hotplugging a CPU instance, # it should be passed by management with device_add command when # a CPU is being hotplugged. # # @node-id: NUMA node ID the CPU belongs to # @socket-id: socket number within node/board the CPU belongs to # @die-id: die number within node/board the CPU belongs to (Since 4.1) # @core-id: core number within die the CPU belongs to # @thread-id: thread number within core the CPU belongs to # # Note: currently there are 5 properties that could be present # but management should be prepared to pass through other # properties with device_add command to allow for future # interface extension. This also requires the filed names to be kept in # sync with the properties passed to -device/device_add. # # Since: 2.7 ## { 'struct': 'CpuInstanceProperties', 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', '*core-id': 'int', '*thread-id': 'int' } } ## # @HotpluggableCPU: # # @type: CPU object type for usage with device_add command # @props: list of properties to be used for hotplugging CPU # @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides # @qom-path: link to existing CPU object if CPU is present or # omitted if CPU is not present. # # Since: 2.7 ## { 'struct': 'HotpluggableCPU', 'data': { 'type': 'str', 'vcpus-count': 'int', 'props': 'CpuInstanceProperties', '*qom-path': 'str' } } ## # @query-hotpluggable-cpus: # # TODO: Better documentation; currently there is none. # # Returns: a list of HotpluggableCPU objects. # # Since: 2.7 # # Example: # # For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8: # # -> { "execute": "query-hotpluggable-cpus" } # <- {"return": [ # { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core", # "vcpus-count": 1 }, # { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core", # "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"} # ]}' # # For pc machine type started with -smp 1,maxcpus=2: # # -> { "execute": "query-hotpluggable-cpus" } # <- {"return": [ # { # "type": "qemu64-x86_64-cpu", "vcpus-count": 1, # "props": {"core-id": 0, "socket-id": 1, "thread-id": 0} # }, # { # "qom-path": "/machine/unattached/device[0]", # "type": "qemu64-x86_64-cpu", "vcpus-count": 1, # "props": {"core-id": 0, "socket-id": 0, "thread-id": 0} # } # ]} # # For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2 -cpu qemu # (Since: 2.11): # # -> { "execute": "query-hotpluggable-cpus" } # <- {"return": [ # { # "type": "qemu-s390x-cpu", "vcpus-count": 1, # "props": { "core-id": 1 } # }, # { # "qom-path": "/machine/unattached/device[0]", # "type": "qemu-s390x-cpu", "vcpus-count": 1, # "props": { "core-id": 0 } # } # ]} # ## { 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'], 'allow-preconfig': true } ## # @set-numa-node: # # Runtime equivalent of '-numa' CLI option, available at # preconfigure stage to configure numa mapping before initializing # machine. # # Since 3.0 ## { 'command': 'set-numa-node', 'boxed': true, 'data': 'NumaOptions', 'allow-preconfig': true }